Synthesis and single-crystal X-ray characterization of 4,4"-functionalized 4'-(4-bromophenyl)-2,2':6',2"-terpyridines

To expand the utility of bis(terpyridine) metal connectivity, the selective symmetrical and unsymmetrical 4,4"-functionalization (-CN, -Me, -CO2Me) of 4'-(4-bromophenyl)-2,2':6',2"-terpyridines was achieved using the Kr?hnke synthesis. The final substituted 2,2':6',2"-terpyridines along with their corresponding intermediates, 4a-c, were recrystallized and characterized by 1H NMR and 13C NMR as well as X-ray crystallography; COSY correlations were also conducted to permit definitive proton assignment.     

Synthesis and antiarrhythmic activity of 2,2-dialkyl-1'-(N-substituted aminoalkyl)-spiro-(chroman-4,4'-imidazolidine)-2',5'-diones.

A novel series of 2,2-dialkyl-1'-(N-substituted aminoalkyl)-spiro-[chroman-4,4' -imidazolidine]-2',5'-diones was synthesized and evaluated for antiarrhythmic activity in chloroform- or/and aconitine-induced ventricular arrhythmia in mice. Among these compounds, (-)-6-chloro-2,2-dimethyl-1'-[3-(4-hydroxypiperidino)propyl] -spiro-[chroman-4,4'-imidazolidine]-2',5' -dione was found to be more effective than reference agents and was selected for further development.     

The synthesis and resolution of 2,2'-, 4,4'-, and 6,6'-substituted chiral biphenyl derivatives for application in the preparation of chiral materials

Various routes were examined for the synthesis of chiral biphenyl species that are substituted at the 2,2', 4,4' and 6,6' positions. Because the biaryl bond is tetrasubstituted, many coupling reactions were not suitable. The most reliable coupling reaction proved to be the Ullmann, which gave the desired product in 82% yield. The products were required as the starting point for the preparation of chiral materials using these as the monomer. For this reason, a route was required that produced large quantities of both enantiomers. The two enantiomers were resolved at the penultimate step by the use of chiral HPLC. A complicating feature proved to be the necessity to have a reactive group at the 4,4' positions, which would permit polymerization though this point. Ultimately, we employed an Ullmann coupling on a dibrominated arene, which occurred selectively at the more hindered bromine by virtue of the directing effect of an ortho ester substituent.     

Adventitious isolation of a pseudorotaxane complex of a trans-bis(Hydroxymethylbenzo)-27-crown-9 pyridyl cryptand and a viologen

ABSTRACT

The adventitious isolation and crystal structure of a pseudorotaxane complex of a trans-substituted dibenzo-27-crown-9-based pyridyl cryptand (6) and N,N’-dimethyl-4,4?-bipyridinium bis(hexafluorophosphate) (5) are reported.     

High-energy 4(10)-2-fluoro-2,2-dinitroethyl and 4(10)-2,2-dinitropropyl derivatives of polynitrohexaazaisowurtzitanes

Russian Chemical Bulletin - Methods for the syntheses of a series of high-energy 4(10)-2-fluoro-2,2-dinitroethyl and 4(10)-2,2-dinitroethyl derivatives of polynitrohexaazaisowurtzitanes were...     

Convenient synthesis of tridentate 2,6-di(pyrazol-1-yl)-4-carboxypyridine and tetradentate 6,6′-di(pyrazol-1-yl)-4,4′-dicarboxy-2,2′-bipyridine ligands

Citrazinic acid is used as a convenient starting material for both tridentate 2,6-di(pyrazol-1-yl)-pyridine and tetradentate 6,6′-di(pyrazol-1-yl)-2,2′-bipyridine ligands containing carboxylic groups useful for further anchoring of sensitizer on TiO₂ for dye-sensitized solar cells (DSCs). Using 2,6-dichloro-4-carboxypyridine, the synthesis of the terdentate ligands was improved compared to previously used 2,6-dibromo-4-carboxypyridine or 2,6-dichloro-4-ethylcarboxylate pyridine. Controlling the reaction conditions, it is possible to efficiently obtain the monosubstituted 2-chloro-6-pyrazol-1-yl-4-carboxypyridine, a key intermediate for the preparation of tetradentate 6,6′-di(pyrazol-1-yl)-4,4′-dicarboxy-2,2′-bipyridine ligand.     

Practical designed syntheses of all stereoisomeric bis(2,2')- and tris(2,2',2' ')-tetrahydrofurans

A convenient synthetic entry to the entire group of bis(2,2')- and tris(2,2',2' ')-tetrahydrofurans has been developed. The method is concise and relies on chromatographic separation, decarbonylation, and annulation to arrive at a specific product of defined relative configuration. [reaction: see text]     

Highly efficient alkene epoxidation and aziridination catalyzed by iron(II) salt + 4,4',4'-trichloro-2,2':6',2'-terpyridine/4,4'-dichloro-4'-O-PEG-OCH3-2,2':6',2'-terpyridine

"Iron(II) salt + 4,4',4'-trichloro-2,2':6',2'-terpyridine" is an effective catalyst for epoxidation and aziridination of alkenes and intramolecular amidation of sulfamate esters. The epoxidation of allylic-substituted cycloalkenes achieved excellent diastereoselectivities up to 90%. ESI-MS results supported the formation of iron-oxo and -imido intermediates. Derivitization of Cl 3terpy to O-PEG-OCH 3-Cl 2terpy renders the terpyridine unit to be recyclable, and the "iron(II) salt + 4,4'-dichloro-4'- O-PEG-OCH 3-2,2':6',2'-terpyridine" protocol can be reused without a significant loss of catalytic activity in the alkene epoxidation.     

Solid-state synthesis of poly(3',4'-dimethoxy-2,2':5',2"- terthiophene): comparison with poly(terthiophene) and poly(3',4'-ethylenedioxy-2,2':5',2"- terthiophene)

A new terthiophene monomer: 3',4'-dimethoxy-2,2':5',2"-terthiophene (TMT) was synthesized and characterized by 1H-NMR, 13C-NMR and FTIR. The solid-state oxidative polymerizations of TMT were performed in various ratios of oxidant (FeCl?) to monomer (TMT). The resulting polymers were characterized by 1H-NMR, FTIR, UV-vis-NIR, GPC, X-ray diffraction, CV, as well as TGA and conductivity measurements. The structure and properties of poly (TMT) were compared with those of polyterthiophene [poly(TT)] and poly (3',4'-ethylenedioxy-2,2':5',2"-terthiophene) [poly(TET)] prepared under the same polymerization conditions. After comparative analysis with poly(TT) and poly(TET), the effects of the dimethoxy substituent and FeCl? on the structural and physicochemical properties of the poly(TMT)s were discussed in depth. The comparison suggested that the dimethoxy-substituted polymer did not display higher crystallinity, thermal stability, conductivity and electrochemical activity than ethylenedioxy substituted one. The results also showed that the effect of FeCl? on poly(TMT) was similar that seen with the poly(TT), in which the oxidation degree, electrochemical activity and conductivity increased steadily with increasing [FeCl?/[TT] ratio. Furthermore, the poly(TMT) and poly(TT) are mostly made up of dimers with a small amount of higher molecular weight components.     

4'-(5'-R-pyrimidyl)-2,2':6',2'-terpyridyl (R = H, OEt, Ph, Cl, CN) platinum(II) phenylacetylide complexes: synthesis and photophysics

A series of new square-planar 4'-(5'-R-pyrimidyl)-2,2':6',2'-terpyridyl platinum(II) phenylacetylide complexes ( 1a- 5a) bearing different substituents (R = H, OEt, Ph, Cl, CN) on the pyrimidyl ring have been synthesized and characterized. The electronic absorption, photoluminescence, and triplet transient difference absorption spectra were investigated. All of the complexes exhibit broad, moderately strong absorption between 400 and 500 nm that can be tentatively assigned to the metal-to-ligand charge transfer ( (1)MLCT) transition, possibly mixed with some ligand-to-ligand charge transfer ( (1)LLCT) character. Photoluminescence arising from the (3)MLCT state was observed both in fluid solutions at room temperature and in a rigid matrix at 77 K. The (1)MLCT/ (1)LLCT absorption bands and the (3)MLCT emission bands for 1a- 5a red-shift in comparison to those of the corresponding 4'-toly-2,2':6',2'-terpyridyl platinum(II) phenylacetylide complex. In addition, the energies of the (1)MLCT/ (1)LLCT absorption and the (3)MLCT emission bands exhibit a linear correlation with the Hammett constant (sigma p) of the 5'-substituent on the pyrimidyl ring. The lifetime of the (3)MLCT emission at room temperature is governed by the energy gap law. The triplet transient difference absorption spectra of 1a- 5a exhibit a broad absorption band from 500 to 800 nm, and a bleaching band between 420 and 500 nm. Complex 5a, which contains the -CN substituent, exhibits a lower-energy triplet absorption band at 785 nm and a shorter lifetime (130 ns) in CH 3CN than 2a, which has the -OEt substituent, does (lambda T1-Tn (max) = 720 nm, tau T = 660 ns). The triplet excited-state absorption coefficients at the band maxima for 1a- 5a vary from 36 600 L.mol (-1).cm (-1) to 115 090 L.mol (-1).cm (-1), and the quantum yields of the triplet excited-state formation range from 0.19 to 0.66. All complexes exhibit a moderate nonlinear transmission for nanosecond laser pulses at 532 nm. Moreover, these complexes can generate singlet oxygen efficiently in air-saturated CH 3CN solutions, with the singlet oxygen generation quantum yield (Phi Delta) varying from 0.24 to 0.46.     

Synthesis, and two photon absorption properties of 7,7'-(iminundecahydro-closo-dodecaborate)-9,9'-(dihexyl)-2,2'-bifluorene

Hybrid organic-inorganic bis-tetrabutylammonium-7,7'-(iminundecahydro-closo-dodecaborate)-9,9'-(dihexyl)-2,2'-bifluorene (5) was prepared, and the influence of the closo-dodecaborate cluster on the two-photon absorption properties of bi-fluorene derivatives was demonstrated.     

Synthesis and Structure of Trimethylplatinum(IV) Iodide Complex of 4'-(4-Methoxyphenyl)-2,2':6',2'-terpyridine Ligand and its Halogen Bonding Property

The synthesis and structural characterization of a new trimethylplatinum(IV) iodide complex of 4'-(4-methoxyphenyl)-2,2':6',2''-terpyridine ligand L, {PtMe₃IL} ( 1 ) is reported. The X-ray crystal structure shows that the terpyridine ligand L binds the platinum(IV) metal center in bidentate fashion, which is well supported by the ¹H NMR spectrum of 1 . The complex 1 upon crystallization with 1,4-diiodotetrafluorobenzene (DITFB) forms the halogen bonded complex 1a ( 1· DITFB). The structural investigation shows that 1a exhibits the halogen bonding interaction in which the non-coordinated pyridyl nitrogen acts as halogen bond acceptors by forming I ··· N interaction with iodine atom of DITFB. In addition iodine atom of complex 1 also acts as weak halogen bond acceptor.     

Ruthenium(II) complexes with improved photophysical properties based on planar 4'-(2-pyrimidinyl)-2,2':6',2' '-terpyridine ligands

A series of new tridentate polypyridine ligands, made of terpyridine chelating subunits connected to various substituted 2-pyrimidinyl groups, and their homoleptic and heteroleptic Ru(II) complexes have been prepared and characterized. The new metal complexes have general formulas [(R-pm-tpy)Ru(tpy)]2+ and [Ru(tpy-pm-R)2]2+ (tpy = 2,2':6',2' '-terpyridine; R-pm-tpy = 4'-(2-pyrimidinyl)-2,2':6',2' '-terpyridine with R = H, methyl, phenyl, perfluorophenyl, chloride, and cyanide). Two of the new metal complexes have also been characterized by X-ray analysis. In all the R-pm-tpy ligands, the pyrimidinyl and terpyridyl groups are coplanar, allowing an extended delocalization of acceptor orbital of the metal-to-ligand charge-transfer (MLCT) excited state. The absorption spectra, redox behavior, and luminescence properties of the new Ru(II) complexes have been investigated. In particular, the photophysical properties of these species are significantly better compared to those of [Ru(tpy)2]2+ and well comparable with those of the best emitters of Ru(II) polypyridine family containing tridentate ligands. Reasons for the improved photophysical properties lie at the same time in an enhanced MLCT-MC (MC = metal centered) energy gap and in a reduced difference between the minima of the excited and ground states potential energy surfaces. The enhanced MLCT-MC energy gap leads to diminished efficiency of the thermally activated pathway for the radiationless process, whereas the similarity in ground and excited-state geometries causes reduced Franck Condon factors for the direct radiationless decay from the MLCT state to the ground state of the new complexes in comparison with [Ru(tpy)2]2+ and similar species.     

双羟甲基-18-冠-6及其衍生物的合成

报道了双羟甲基-18-冠-6及其正丁基、烯丙基、酯基、羧酸基衍生物的合成。所合成的八种新冠醚化合物的结构已经IR、MS、NMR、元素分析证实。     

Bis(m-phenylene)-32-crown-10-based cryptands, powerful hosts for paraquat derivatives

Four new bis(m-phenylene)-32-crown-10-based cryptands with different third bridges were prepared. Their complexes with paraquat derivatives were studied by proton NMR spectroscopy, mass spectrometry, and X-ray analysis. It was found that these cryptands bind paraquat derivatives very strongly. Specifically, a diester cryptand with a pyridyl nitrogen atom located at a site occupied by either water or a PF(6) anion in analogous complexes exhibited the highest association constant K(a) = 5.0 x 10(6) M(-1) in acetone with paraquat, 9000 times greater than the crown ether system. X-ray structures of this and analogous complexes demonstrate that improved complexation with this host is a consequence of preorganization, adequate ring size for occupation by the guest, and the proper location of the pyridyl N-atom for binding to the beta-pyridinium hydrogens of the paraquat guests. This readily accessible cryptand is one of the most powerful hosts reported for paraquats.     

Structural, redox, and photophysical studies of the tetra(pyridyl)porphyrin complex containing four (2,2'-bipyridine)(2,2':6',2"-terpyridine)ruthenium(II) groups

New hybrid complexes of polypyridyl ruthenium and pyridylporphyrins have been prepared by the coordination of pyridyl nitrogens to the ruthenium centers. A 1:4 hybrid complex, [{Ru(bpy)(trpy)}4(mu4-H2Py4P)]8+ ([1]8+) (bpy = 2,2'-bipyridine; trpy = 2,2':6',2"-terpyridine; H2Py4P = 5,10,15,20-tetra(4-pyridyl)porphyrin), has been characterized by the single-crystal X-ray diffraction method. A 1:1 complex, [{Ru(bpy)(trpy)}(H2PyT3P)]2+ ([2]2+) (H2PyT3P = 5-(4-pyridyl)tritolylporphyrin) has also been prepared. The Soret band of the porphyrin ring shifts to longer wavelength with some broadening, the extent of the shift being larger for [1]8+. Cyclic voltammograms of the two complexes show simple overlap of the component redox waves. The complexes are weakly emissive at room temperature, which becomes stronger at lower temperatures. While [1]8+ at >140 K and [2]2+ at 77-280 K show only porphyrin fluorescence, [1]8+ at <140 K shows ruthenium and porphyrin phosphorescence, in addition to the porphyrin fluorescence.     

Synthesis of 1,8-di(pyrazol-1-yl)-3,6-dioxaoctane and its derivatives

From pyrazole, 3,5-dimethylpyrazole, and 1,8-dibromo-3,6-dioxaoctane in a superbasic medium KOH-DMSO the corresponding 1,8-di(pyrazol-1-yl)-3,6-dioxaoctanes were synthesized and converted into iodo-, nitro-, amino-, and formylderivatives.