Adsorption of sodium dodecyl sulfate onto clathrate hydrates in the presence of salt

This work presents the effect of NaCl on the adsorption of sodium dodecyl sulfate (SDS) at the cyclopentane (CP) hydrate-water interface. The adsorption isotherms and the SDS solubility in NaCl solutions are obtained using liquid-liquid titrations. The solubility data are determined at typical hydrate forming temperatures (274-287K) to ensure that the adsorption isotherms are obtained within SDS solubility limits in NaCl solutions. The isotherms show L-S (Langmuir-Step) type behaviors with 1mM and 10mM NaCl solutions while L type isotherm is determined for 25mM NaCl solutions due to the low SDS solubility in this salt concentration. Zeta potentials of CP hydrate particles in the aqueous solutions support the shape of the adsorption isotherm with the 1mM NaCl solution. The 1mM NaCl case shows the highest SDS adsorption amount among the cases with 0mM, 10mM, and 25mM NaCl solutions. In this case, the competition for adsorption between Cl(-) and DS(-) is not as strong compared to the 10 and 25mM NaCl cases and the presence of Na(+) ions may reduce the repulsion between DS(-) ions, which results in a higher adsorption of DS(-) ions and enhanced enclathration.     

Phase Separation Phenomenon in Non-ionic Surfactant TX-114 Micellar Solutions: Effect of Added Surfactants and Polymers

Clouding (or phase separation) in non-ionic surfactants is a well-known phenomenon. Clouding is to be avoided in some applications whereas in others it is preferred. Herein the results of CP (cloud point—the temperature at which solution separates into two phases) measurements of the non-ionic surfactant Triton X-114 (TX-114) in the presence of surfactants and polymers are presented. Cationic and nonionic surfactants, in the absence and presence of the quaternary salt tetrabutylammonium bromide (TBAB), increase the CP of TX-114. Anionic surfactants, in the absence of TBAB, increase the CP; in the presence of TBAB, these surfactants decrease the CP. Polymers of PEG and PVP series have been found to decrease the CP. The results are discussed by taking into consideration the nature of the added surfactants and polymers.     

Competitive adsorption between SDS and carbonate on tetrahydrofuran hydrates

Sodium dodecyl sulfate (SDS) has been well known as a promoter for the formation of hydrates. However, the use of SDS to enhance the formation of CO₂ hydrates has not been effective. This work will present an idea of competitive adsorption that will provide insights into the nonpromoting effect of SDS under high carbonate concentrations. The competitive adsorption is studied between DS^? monomers and carbonate ions on tetrahydrofuran (THF) hydrates. The adsorption is qualitatively investigated by using pyrene fluorescence measurements. The SDS concentration at which hydrophobic domains occur on the hydrate surface increases with the increased carbonate concentration and this trend is less dependent on the order of addition of these two species. This concentration is 0.17 mM at carbonate concentrations less than 2 μM and it shifts to 3.47 mM at carbonate concentrations higher than 2.5 μM. Thus, using carbonate with its concentration higher than 2.5 μM would be enough to displace the hydrophobic domains formed by SDS up to the solubility limit.     

SANS study of tuning of clouding in charged micellar system

We report the phenomenon of clouding in charged micellar solution of sodium dodecyl sulfate (SDS) surfactant with varying concentration of tetrabutylammonium bromide (TBAB) salt. The cloud point (CP) temperature is found to decrease significantly with TBAB concentration. Small-angle neutron scattering (SANS) studies have been performed on these systems to understand the evolution of structure and interaction of micelles prior and after the CP. Data are analyzed using Baxter’s sticky hard-sphere potential between the micelles as approaching the CP. It is found that the attractive potential amongst micelles increases with temperature leading to clustering at CP. Both the micelles and clusters coexist at CP and even at temperatures much higher than CP. The propensity of cluster formation strongly depends on the TBAB concentration where higher TBAB concentration provides smaller temperature range over which the clusters are formed. SANS data from clusters show a Porod scattering in the low-Q region, suggesting a very large size of the clusters. The stability of these clusters against phase separation is examined by the time-dependent SANS and compared for different TBAB concentrations.     

Determination of 5-aminosalicylic acid related impurities by micellar electrokinetic chromatography with an ion-pair reagent

A micellar electrokinetic chromatographic (MEKC) method was developed for the quantification of mesalazine or 5-aminosalicylic acid (5-ASA) and its major impurities 3-aminosalicylic acid, salicylic acid, sulfanilic acid and 4-aminophenol. The optimisation of the experimental conditions was carried out considering some important requirements: resolution, reproducibility, detection limits of 0.1% (m/m) or less, short total analysis time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds; the addition of tetrabutylammonium bromide (TBAB) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as TBAB concentration, SDS concentration, background electrolyte pH and concentration, were evaluated. Using a fused-silica capillary (8.5 cm effective length) complete analysis was obtained in a very short time. Under the optimised final conditions [120 mM 3-(cyclohexylamino)-2-hydroxy-1-propanesulfonic acid buffer, pH 10.20, 65 mM SDS in the presence of 55 mM TBAB and 5% methanol] the method was validated for specificity, precision, linearity, limits of detection and quantitation, and robustness: the 5-ASA related impurities can be quantified at least at the 0.1% (m/m) level.     

Investigation on Gas Storage in Methane Hydrate

The effect of additives (anionic surfactant sodium dodecyl sulfate (SDS), nonionic surfactantalkyl polysaccharide glycoside (APG), and liquid hydrocarbon cyclopentane (CP)) on hydrate inductiontime and formation rate, and storage capacity was studied in this work. Micelle surfactant solutions werefound to reduce hydrate induction time, increase methane hydrate formation rate and improve methanestorage capacity in hydrates. In the presence of surfactant, hydrate could form quickly in a quiescentsystem and the energy costs of hydrate formation were reduced. The critical micelle concentrations of SDS and APG water solutions were found to be 300x 10-6 and 500x 10-6 for methane hydrate formation systemrespectively. The effect of anionic surfactant (SDS) on methane storage in hydrates is more pronounced compared to a nonionic surfactant (APG). CP also reduced hydrate induction time and improved hydrateformation rate, but could not improve methane storage in hydrates.     

阳离子表面活性剂对有机颜料艳红6B光催化降解的影响

 研究了阳离子表面活性剂四丁基溴化铵(TBAB)和十六烷基三甲基溴化铵(CTAB)对TiO2光催化降解艳红6B(R6B)的影响,讨论了表面活性剂与R6B的相互作用,给出了二者与TiO2之间的吸附模型. 结果表明,相同条件下,阳离子表面活性剂的加入可增加R6B的降解褪色速率,但表面活性剂自身并不降解. 在强酸(pH=3.00)和强碱(pH=12.60)条件下,R6B的降解褪色速率较快. pH值相同时,体系中TBAB的浓度变化对R6B降解褪色速率的影响不大,而CTAB浓度的变化对R6B降解褪色速率的影响较为明显,CTAB浓度为0.4 g/L时R6B的降解褪色速率最快.     

Interfacial and solution properties of tetraalkylammonium bromides and their sodium dodecyl sulfate interacted products: a detailed physicochemical study

The adsorption and solution behaviors of symmetrical tetramethyl-, tetraethyl-, tetrapropyl-, and tetrabutylammonium bromides (TMAB, TEAB, TPAB, and TBAB, respectively) were studied at the air/water interface and in the bulk aqueous environments. Their salts were prepared by reacting tetraalkylammonium bromide (TAAB) with sodium dodecyl sulfate (SDS) in a solution from which the products of the higher two homologues (tetrapropylammonium dodecyl sulfate (TPADS) and tetrabutylammonium dodecyl sulfate (TBADS)) could only be isolated as solids and for which detailed characterization has been performed. The interfacial behaviors of 1:1 molar mixtures of TAAB and SDS and the prepared TPADS and TBADS were examined. Micellization of the 1:1 mixtures along with the isolated species were studied in the presence and absence of NaBr salt. The energetics of the micellization process and the counterion binding of the micelles were evaluated. The interaction of the TAABs with SDS micelles was examined, and the results were evaluated in terms of single- and two-site binding interaction models. Of the formed tetraalkylammonium dodecyl sulfates (TAADSs), only TBADS evidenced clouding, which was investigated in detail along with 1:1 molar mixtures of TBAB and SDS in aqueous solution in the presence of additives such as NaBr, SDS, and TBAB. The solution behaviors of the TAADS and the clouding of TBADS have been rationalized in terms of a mixed micellar model.     

Studies of mixed micelle formation between cationic gemini and cationic conventional surfactants

Mixed micellization of dimeric cationic surfactants tetramethylene-1,4-bis(hexadecyldimethylammonium bromide)(16-4-16), hexamethylene-1,6-bis(hexadecyldimethylammonium bromide) (16-6-16) with monomeric cationic surfactants hexadecyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), cetylpyridinium chloride (CPC), and tetradecyltrimethylammonium bromide (TTAB) have been studied by conductivity and steady-state fluorescence quenching techniques. The behavior of mixed systems, their compositions, and activities of the components have been analyzed in the light of Rubingh's regular solution theory. The results indicate synergism in the binary mixtures. Ideal and experimental critical micelle concentrations (i.e., cmc(*) and cmc) show nonideality, which is confirmed by beta values and activity coefficients. The micelle aggregation numbers (N(agg)), evaluated using steady-state fluorescence quenching at a total concentration of 2 mM for CTAB/16-4-16 or 16-6-16 and 5 mM for TTAB/16-4-16 or 16-6-16 systems, indicate that the contribution of conventional surfactants was always more than that of the geminis. The micropolarity, dielectric constant and binding constants (K(sv)) of mixed systems have also been evaluated from the ratios of respective peak intensities (I(1)/I(3) or I(0)/I(1)).     

Cloud point variation of amphiphilic drug promethazine hydrochloride with added surfactants

In this paper we report clouding phenomenon occurring in an amphiphilic phenothiazine drug promethazine hydrochloride (PMT) in presence of surfactants. Cationic and nonionic surfactants increase the CP of 75 mM PMT solutions (prepared in 10 mM sodium phosphate buffer). These surfactants form mixed micelles with PMT. Anionic surfactants also form mixed micelles with the drug but the CP behavior is different by showing a peaked behavior. At low concentrations, anionic surfactants hinder micelle formation by forming ion-pairs whereas the usual CP decreasing effect at higher concentrations is due to mixed micellization. The CP behavior of 75 mM PMT+50 mM TBAB+surfactant systems is also explored which is found similar to PMT+surfactant systems with the difference only in magnitude of the clouding temperature.     

Reaction of Diazo Compounds with Difluorocarbene: An Efficient Approach towards 1,1‐Difluoroolefins

A transition‐metal‐free difluoromethylenation of diazo compounds that proceeds under mild conditions has been developed and is based on the use of TMSCF₂Br as the difluoromethylene source and tetrabutylammonium bromide (TBAB) as the promoter. The chemoselective formal carbene dimerization reaction is achieved owing to the electronic properties and the relative stability of the difluorocarbene intermediate.     

Interactions of cationic gemini surfactants with hydrophobically modified poly(acrylamides) studied by fluorescence and microcalorimetry

Steady-state fluorescence, time-resolved fluorescence quenching, and isothermal titration microcalorimetry have been used to study the interactions of cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) (C(12)C(S)C(12)Br(2), S = 3, 6, and 12) with hydrophobically modified poly(acrylamide) (HMPAM) and unmodified poly(acrylamide) (PAM). Without addition of gemini surfactant, 0.2 wt % HMPAMs except PAM have already self-aggregated into hydrophobic aggregates. Different from single-chain surfactants, C(12)C(S)C(12)Br(2) have stronger interactions with HMPAMs to form surfactant/polymer aggregates, even with PAM. Addition of C(12)C(S)C(12)Br(2) may cause the disruption of HMPAM hydrophobic aggregates and the formation of mixed micelles. It is found that HMPAMs generate lower micropolarity of mixed micelles, larger values of enthalpy of interaction (DeltaH(ps)), and nearly constant values of Gibbs free energy of interaction (DeltaG(ps)). On the other hand, C(12)C(S)C(12)Br(2) with longer spacer brings out slightly lower micropolarity of mixed micelles, owing to the lower electrostatic repulsion between surfactant headgroups. Especially for C(12)C(12)C(12)Br(2), the values of DeltaH(ps) are much more endothermic and the values of DeltaG(ps) are much less negative. The weaker interactions of C(12)C(12)C(12)Br(2) with HMPAMs arise from the marked reduction of attraction between surfactant headgroups and polymer hydrophilic groups induced by its longer spacer.     

Enhancing the electrochemiluminescence of tris(2,2'-bipyridyl)ruthenium(II) by ionic surfactants

The dependence of the electrochemiluminescence of Ru(bpy)3(2+) (bpy = 2,2'-bipyridine) with tri-n-propylamine as co-reactant on the anionic surfactant SDS (sodium dodecyl sulfate) and the cationic surfactants CTAX (CTA = cetyltrimethylammonium cation, X = bromide, chloride and hydrogensulfate) was studied. Both SDS and CTAX, at low surfactant concentrations below the critical micelle concentrations, enhance the electrochemiluminescence at a platinum working electrode. A further enhancement of the light emission intensity by bromide ions was observed when CTAB (B = bromide) was used-an overall 30-fold increase in electrochemiluminescence efficiency was obtained at a CTAB concentration of 0.08 mM. Voltammetric data support adsorption of surfactant molecules on the electrode surface as the cause of the enhancement of electrochemiluminescence by ionic surfactants.     

Reversible and irreversible adsorption of surfactants at a hanging mercury drop electrode.

The adsorption-desorption phenomena of surfactants were studied by measuring differential capacity-potential curves in a static solution and differential capacity-time curves in a flowing solution. The surfactants investigated were Aerosol OT, cetylpyridinium chloride, Hyamin 1622, tetrabutylammonium bromide, Triton X-100 and trioctylphosphineoxide. The differential capacity-potential and differential capacity-time curves for these surfactants showed different shapes, with and without peaks. The differential capacity-time curves were used to study the adsorption reversibility of the surfactants at a mercury electrode. The adsorptions of Hyamin 1622 and Triton X-100 were irreversible at all the potentials investigated. The adsorptions of Aerosol OT and trioctylphosphineoxide were irreversible except at the potential more positive than -0.2 V. The adsorption of tetrabutylammonium bromide was almost reversible at any potential investigated. The adsorption of cetylpyridinium chloride was complicated, indicating different orientations of adsorption.     

Effect of surfactant structure on the stability of carbon nanotubes in aqueous solution

The suspending behaviors of multiple-wall carbon nanotubes (MWNTs), including pristine MWNTs (p-MWNTs) and acid-mixture-treated MWNTs (MWNTCOOH), stabilized by cationic single-chain surfactant, dodecyltrimethylammonium bromide (DTAB), and cationic gemini surfactant hexyl-alpha,beta-bis(dodecyldimethylammonium bromide) (C 12C 6C 12Br 2) were studied systematically. The surfactant structure influences the suspendability of MWNTs dramatically as well as the surfactant adsorption behavior on the nanotubes. Although both the surfactants can disperse the MWNTs effectively, they actually show different stabilizing ability. DTAB is not capable of stabilizing these two MWNTs below critical micelle concentration (CMC). However, C 12C 6C 12Br 2 can suspend both the nanotubes effectively even well below its CMC. Moreover, the adsorption of these two surfactants reaches equilibrium at twice the CMC with the original MWNT concentration of 2 mg/mL, 2 mM for C 12C 6C 12Br 2, and 30 mM for DTAB. After the adsorption equilibrium, the maximum amounts of the two suspended MWNTs in C 12C 6C 12Br 2 solution are about twice as much as those in DTAB solution. The strong hydrophobic interaction among the C 12C 6C 12Br 2 molecules and between the C 12C 6C 12Br 2 molecules and the nanotubes as well as the high charge capacity of C 12C 6C 12Br 2 lead to its much stronger adsorption ability on the MWNTs and result in its superior stabilizing ability for the MWNTs in aqueous phase. The gemini surfactant provides a possibility to effectively stabilize the MWNTs in aqueous solutions even at very low surfactant concentration well below its CMC.     

Synthesis of gold nano- and microplates in hexagonal liquid crystals

Single-crystalline gold nano- and microplates with triangular or hexagonal shapes are synthesized by reduction of HAuCl(4) in lyotropic liquid crystal (LLC) mainly made of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers and water after adding a small amount of capping agents, cetyltrimethylammonium bromide (CTAB) or tetrabutylammonium bromide (TBAB). During the growth of such plates, capping agents play the crucial role. It is found that there is an optimal value of CTAB or TBAB concentration for producing microplates. The selective adsorption of CTAB or TBAB on certain crystallographic facets may be the key point of the supposed mechanism. Although LLC does not really act as a template, it provides an ordered structure confining CTAB as well as the nascent metal nuclei, which enhances the oriented attachment of nuclei and thus the consequent growth of single-crystal plates.     

Study on thermal properties of TBAB–THF hydrate mixture for cold storage by DSC

In order to study the thermal properties of new type environment-friendly binary hydrate for cold storage in air-conditioning system, tests have been carried out by DSC comprehensively on the phase-change temperature and fusion heat of TBAB hydrate, THF hydrate, and TBAB–THF hydrate mixture. The results show a good trend that TBAB–THF hydrate has the superiority for more proper phase-change temperature and increased fusion heat. A broader and more developed view is that adding appropriate amount of hydrate with lower phase-change temperature to hydrate with higher one can make the hydrate mixture more suitable for cold storage (especially for 278–281 K); some hydrates with lower phase-change temperature can even make the fusion heat of mixture hydrate increased greatly. Several new environmental working pairs for binary gas hydrates have been listed to help to promote the application.     

Regulation of visible-light-driven photocatalytic degradation of Rhodamine B on BiOBr via zeta potential

Research on Chemical Intermediates - In this paper, bismuth oxybromide (BiOBr) photocatalysts were synthesized in the presence of tetrabutylammonium bromide (TBAB) at the different volume fractions...     

Thermodynamic studies on the interaction of folic acid with bovine serum albumin

Binding of the vitamin folic acid with bovine serum albumin (BSA) has been studied using isothermal titration calorimetry (ITC) in combination with fluorescence and circular dichroism spectroscopies. The thermodynamic parameters of binding have been evaluated as a function of temperature, ionic strength, in the presence of nonionic surfactants triton X-100, tetrabutylammonium bromide, and sucrose. The values of the van’t Hoff enthalpy calculated from the temperature dependence of the binding constant agree with the calorimetric enthalpies indicating that the binding of folic acid to the BSA is a two state process without involving intermediates. These observations are supported by the intrinsic fluorescence and circular dichroism spectroscopic measurements. With increase in the ionic strength, reduction in the binding affinity of folic acid to BSA is observed suggesting predominance of electrostatic interactions in the binding. The contribution of hydrophobic interactions in the binding is also demonstrated by decrease in the binding affinity in the presence of tetrabutylammonium bromide (TBAB). The value of binding affinity in the presence of sucrose indicates that hydrogen bonding also plays a significant contribution in the complexation process. The calorimetric and spectroscopic results provide quantitative information on the binding of folic acid to BSA and suggest that the binding is dominated by electrostatic interactions with contribution from hydrogen bonding.     

Intensification of methane and hydrogen storage in clathrate hydrate and future prospect

Gas hydrate is a new technology for energy gas (methane/hydrogen) storage due to its large capacity of gas storage and safe. But industrial application of hydrate storage process was hindered by some problems. For methane, the main problems are low formation rate and storage capacity, which can be solved by strengthening mass and heat transfer, such as adding additives, stirring, bubbling, etc. One kind of additives can change the equilibrium curve to reduce the formation pressure of methane hydrate, and the other kind of additives is surfactant, which can form micelle with water and increase the interface of water-gas. Dry water has the similar effects on the methane hydrate as surfactant. Additionally, stirring, bubbling, and spraying can increase formation rate and storage capacity due to mass transfer strengthened. Inserting internal or external heat exchange also can improve formation rate because of good heat transfer. For hydrogen, the main difficulties are very high pressure for hydrate formed. Tetrahydrofuran (THF), tetrabutylammonium bromide (TBAB) and tetrabutylammonium fluoride (TBAF) have been proved to be able to decrease the hydrogen hydrate formation pressure significantly.