Cationic palladium(II)-allyl-complexes containing 2-pyridyldiphenylphosphine: X-ray crystal structure of the binuclear complex [Pd(η-2-Me-allyl)(μ-Ph2PPy)]2(BF4)2. Detection of an intramolecular C(allyl)-H?phenyl ring π-interaction

Reaction of [PdCl(η³-2-Me-allyl)(Ph₂PPy)] (1) with AgBF₄ affords the new dinuclear cationic complex [Pd(η³-2-Me-allyl)(μ-Ph₂PPy)]₂(BF₄)₂ (2). The X-ray structural analysis of 2 shows that the 2-pyridyldiphenylphosphine ligands adopt a binucleating role through the P and N atoms bridging two independent palladium centres to form an eight-membered metallocyclic ring. One of the anti hydrogen atoms of the allyl moiety was located very close to a phenyl ring of Ph₂PPy indicating the occurrence of a CH/π interaction. Addition of one equivalent of Ph₂PPy to complex (2) affords the mononuclear cationic complex [Pd(η³-2-Me-allyl)(Ph₂PPy)₂](BF₄) (3).     

1-Methyl-4-ferrocenylmethyl-3,5-diphenylpyrazole: A versatile ligand for palladium(II) and platinum(II)

The syntheses and characterization of two novel ferrocene derivatives containing 3,5-diphenylpyrazole units of general formula [1-R-3,5-Ph₂-(C₃N₂)-CH₂-Fc] {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄) and R = H (2) or Me (3)} together with a study of their reactivity with palladium(II) and platinum(II) salts or complexes under different experimental conditions is described. These studies have allowed us to isolate and characterize trans-[Pd{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}₂Cl₂] (4a) and three different types of heterodimetallic complexes: cis-[M{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] {M = Pd (5a) or Pt (5b)}, the cyclometallated products [M{κ²-C,N-[3-(C₆H₄)-1-Me-5-Ph-(C₃N₂)]-CH₂-Fc}Cl(L)] with L = PPh₃ and M = Pd (6a) or Pt (6b) or L = dmso and M = Pt (8b) and the trans-isomer of [Pt{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] (7b). In compounds 4a, 5a, 5b and 7b, the ligand behaves as a neutral N-donor group; while in 6a, 6b and 8b it acts as a bidentate [C(sp²,phenyl),N(pyrazole)]⁻ group. A comparative study of the spectroscopic properties of the compounds, based on NMR, IR and UV-Visible experiments, is also reported.     

Reaction of [M(CO)4] (M = Ir, Rh) with cyclopropenyl tetrafluoroborate - Ring opening and coupling of cyclopropenyl ligands to form dinuclear metal complexes

Reaction of the iridium tetracarbonylate [PPN][Ir(CO)₄] (1a) with triphenylcyclopropenyl tetrafluoroborate [C₃Ph₃][BF₄] afforded two dinuclear species Ir₂(CO)₄(μ,η¹:η²-C₃Ph₃)(μ,η²:η³-C₃Ph₃) (2) and Ir₂(CO)₄(μ,η⁴:η⁴-C₆Ph₆) (3a) resulting from the ring opening and in the latter case, coupling of the resulting acyclic, propenyl ligands. The analogous reaction with [PPN][Rh(CO)₄] (1b) afforded only the rhodium analogue for 3a.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Palladium complexes of 8-(di-tert-butylphosphinooxy) quinoline

The preparation of the new ligand 8-(di-tert-butylphosphinooxy)quinoline (1) and the palladium derivatives [PdCl₂(1)] (2), [Pd(η³-all)(1)]⁺ [all = C₃H₅ (3a), 1-PhC₃H₄ (3b) and 1,3-Ph₂C₃H₃ (3c)] and [Pd(η²-ol)(1)] [ol = dimethyl fumarate (4a) and fumaronitrile (4b)] is reported. The cationic species 3a-3c have been isolated as salts. The complex 3a(BF₄) is obtained either from the reaction of 1 with [Pd(μ-Cl)(η³-C₃H₅)]₂ or from the reaction of ClP(CMe₃)₂ with [Pd(η³-C₃H₅)(8-oxyquinoline)], followed in both cases by chloride abstraction with NaBF₄. In the complexes, the ligand 1 is P,N chelated to the central metal, as shown by the X-ray structural analysis of 3a(BF₄). At 25 °C in solution, 3a(BF₄) and 3b(BF₄) undergo a fast η³−η¹−η³ dynamic process which brings about a syn-anti exchange only for the allylic protons cis to phosphorus, while for 4a and 4b a slow rotation of the olefin around its bond axis to palladium takes place. The complexes 2 and 3a(BF₄) are efficient catalyst precursors in the coupling of the phenylboronic acid with aryl bromides and chlorides.     

Linear homobimetallic palladium complexes

The oxidative addition of C₆H₄-1,4-I₂ (1) to Pd(PPh₃)₄ (2) gives mononuclear trans-(Ph₃P)₂Pd(C₆H₄-4-I)(I) (3), which can be converted to trans-(Ph₃P)₂Pd(C₆H₄-4-I)(OTf) (5) by its reaction with [AgOTf] (4). Complex 5 can be used in the high-yield preparation of a series of unique cationic mono- and dinuclear palladium complexes of structural type [trans-(Ph₃P)₂Pd(C₆H₄-4-I)(L)]⁺ (7, L = C₄H₄N₂; 9a, L = C₅H₄N-4-CN; 9b, L = NC-4-C₅H₄N) and [trans-(C₆H₄-4-I)(Ph₃P)₂Pd ← N^∩N → Pd(PPh₃)₂(C₆H₄-4-I)]²⁺ (14a, N^∩N = C₆H₄-1,4-(CN)₂; 14b, N^∩N = (C₆H₄-4-CN)₂; 14c, N^∩N = 4,4′-bipyridine (=bipy)). Complexes 7, 9 and 14 rearrange in solution to give [trans-(Ph₃P)₂Pd(C₆H₄-4-PPh₃)(L)]²⁺ (10, L = C₄H₄N₂; 12a, L = C₅H₄N-4-CN; 12b, L = NC-4-C₅H₄N) and [trans-(C₆H₄-4-PPh₃)(Ph₃P)₂Pd ← N^∩N → Pd(PPh₃)₂(C₆H₄-4-PPh₃)]⁴⁺ (15a, N^∩N = C₆H₄-1,4-(CN)₂; 15b, N^∩N = (C₆H₄-4-CN)₂) along with {[(Ph₃P)₂(Ph₃P-4-C₆H₄)Pd(μ-I)]₂}²⁺ (11).The solid state structures of 3, 9a, 10, 11 and 15b are reported. Most characteristic for all complexes is the square-planar coordination geometry of palladium with trans-positioned PPh₃ ligands. In 3 the iodide and the 4-iodo-benzene are linear oriented laying with the palladium atom on a crystallographic C₂ axes. In 9a this symmetry is broken by steric interactions of the PPh₃ ligands with the 4-cyanopyridine and 4-iodobenzene groups. Compound 11 contains two μ-bridging iodides with different Pd-I separations showing that the ligand induces a stronger trans-influence than PPh₃. In 15b, the Ph₃PC₆H₄Pd ← NCC₆H₄C₆H₄CN → PdC₆H₄PPh₃ building block is rigid-rod structured with the C₆H₄ units perpendicular oriented to the Pd coordination plane, while the biphenylene connecting moiety is in-plane bound.     

Palladium (II) complexes with mono-oxide 1,1′-bis(diphenylphosphino)metallocene ligands [Fe(η-C5Me4PPh2)(η-C5Me4P{O}Ph2)] and [Os(η-C5H4PPh2)(η-C5H4P{O}Ph2)]

The monoxides [Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)] (1) and [Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)] (2) have been prepared by treatment of the corresponding diphosphines with CCl₄ and methanol.These ligands react with [Pd(PhCN)₂Cl₂] to give dichloride complexes of different structure.The dimeric complex [{Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)}PdCl(μ-Cl)]₂ (4) contains the monodentate P-coordinated osmocene ligand with the free P{O}Ph₂ group, while the octamethylferrocene ligand gives the chelate k²-P,O complex [{Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)}PdCl₂] (3).The structures of 3 and 4 have been determined crystallographically.Treatment of 3 and 4 with silver salts in CH₂Cl₂ or acetonitrile leads to the corresponding dicationic complexes[{M(η⁵-C₅R₄PPh₂)(η⁵-C₅R₄P{O}Ph₂)}Pd(MeCN)_x]²⁺ (5, M = Fe, R = Me; 6, M = Os, R = H). Complex 5 decomposes upon isolation, in contrast 6 is rather stable, probably due to Os-Pd bonding. The dichlorides 3 and 4 catalyze catalytic amination of p-bromotoluene with N-(4-tolyl)morpholine with lower activity than (dppf)PdCl₂, however they perform comparable to (dppf)PdCl₂ activity in coupling of p-bromotoluene with p-methoxyphenyl boronic acid.     

η-Cyclopentadienylpalladium(II) complexes: Synthesis, characterization and use for the vinyl addition polymerization of norbornene and the copolymerization with 5-vinyl-2-norbornene or 5-ethylidene-2-norbornene

Dinuclear complexes of palladium(II), containing two bridging halogen (Cl or Br) ligands, [NⁿBu₄]₂[(X₅C₆)₂Pd(μ-Cl)₂Pd(C₆X₅)₂] and [(X₅C₆)(L)Pd(μ-Y)₂Pd(C₆X₅)(L)] (X = F, Cl; Y = Cl, Br), readily react with cyclopentadienylthallium, C₅H₅Tl, to give the corresponding air stable half-sandwich, pseudo-trigonal η⁵-cyclopentadienylpalladium complexes, [NⁿBu₄][(η⁵-C₅H₅)Pd(C₆X₅)₂] (X = F 1, Cl 2) and (η⁵-C₅H₅)Pd(C₆X₅)(L) (X = F, L = CNBu^t3, PPh₃4, PMe₂Ph 5, PEt₃6, AsPh₃7, SbPh₃8; X = Cl, L = PMe₂Ph 9, PEt₃10), respectively. With tetraphenylcyclopentadienylthallium, C₅Ph₄HTl or pentabenzylcyclopentadienylthallium, C₅Bn₅Tl (Bn = CH₂Ph) the air stable half-sandwich complexes (η⁵-C₅Ph₄H)Pd(C₆F₅)(AsPh₃), 12 and (η⁵-C₅Bn₅)Pd(C₆F₅)(AsPh₃), 13 are synthesized accordingly. The molecular structures were verified by NMR-spectroscopy, X-ray crystallography (7, 12, 13) and electron impact-mass spectrometry (EI-MS). The precatalysts 4 and 7 can be activated with methylalumoxane (MAO) for the homopolymerization of norbornene (NB) and 5-ethylidene-2-norbornene (ENB) and for the copolymerization of NB with 5-vinyl-2-norbornene (VNB) or ENB with activities of more than 10⁶ g_PNB/(mol_Pd·h). The higher activity of 7/MAO over 4/MAO towards NB homopolymerization was reversed when the olefin-substituted VNB or ENB were added. Then, the more strongly bound PPh₃ ligand of 4 (versus AsPh₃ of 7) can compete with the olefin functionality of VNB or ENB and assume a directing role for the insertion of the ring double bond. As a consequence 4/MAO shows almost the same activity in NB and ENB homopolymerization.     

Linear homobimetallic palladium complexes with end-capped SC(O)Me units

Rigid-rod structured homobimetallic palladium complexes of type [{trans-(Me(O)CS-4-C₆H₄-C₆H₄)(Ph₃P)₂Pd}₂(μ-N^∩N)](OTf)₂ (8a, μ-N^∩N = 4,4′-bipyridine, bpy; 8b, μ-N^∩N = C₅H₄N-CHN-NCH-C₅H₄N; 8c, μ-N^∩N = C₅H₄N-CHCH-C₆H₄-CHCH-C₅H₄N; 8d, μ-N^∩N = C₅H₄N-CHN-C₆H₄-NCH-C₅H₄N) were synthesized by the reaction of trans-[(Me(O)CS-4-C₆H₄-C₆H₄)(Ph₃P)₂Pd](OTf) (6) with 0.5 equivalents of N^∩N (7a, N^∩N = bpy; 7b, N^∩N = C₅H₄N-CHN-NCH-C₅H₄N; 7c, N^∩N = C₅H₄N-CHCH-C₆H₄-CHCH-C₅H₄N; 7d, N^∩N = C₅H₄N-CHN-C₆H₄-NCH-C₅H₄N) in high yield. Complex 6 was accessible by the subsequent reaction of I-4-C₆H₄-C₆H₄-4′-SC(O)Me (2) with [(PPh₃)₄Pd] (3) to produce trans-[(I)(Me(O)CS-4-C₆H₄-C₆H₄)(Ph₃P)₂Pd] (4) which further reacted with AgOTf (5) to give 6.The structures of 4 and 8c in the solid state are reported. Most characteristic for these systems is the square-planer coordination geometry of palladium with trans-positioned PPh₃ groups. This automatically positions the iodo ligand and the Me(O)CS-4-C₆H₄-C₆H₄ unit (complex 4) or the nitrogen donor atoms of the C₅H₄N-CHCH-C₆H₄-CHCH-C₅H₄N connectivity and the thio-acetyl group Me(O)CS-C₆H₄-C₆H₄ (complex 8c) trans to each other. In 8c a Pd-Pd separation of 20.156 Å is typical.The electrochemical redox behavior of 2, 4 and 8 is discussed.     

Trimethylstannyl (diphenylphosphino)acetate: a source of (diphenylphosphino)acetate ligand in the synthesis of coordination compounds

Trimethylstannyl (diphenylphosphino)acetate (1), which is readily accessible from potassium (diphenylphosphino)acetate and trimethylstannyl chloride, may serve as the source of (diphenylphosphino)acetate anion in the preparation of coordination compounds. Thus, the reactions between [M(cod)Cl₂] (M = Pd and Pt; cod = η²:η²-cycloocta-1,5-diene) and two equivalents of 1 give [M(Ph₂PCH₂CO₂-κ²O,P)₂] (2 and 3), while the reaction of [{Pd(μ-Cl)Cl(PFur₃)}₂] (4; Fur = 2-furyl) with one equivalent of 1 yields [SP-4-3]-[PdCl(Ph₂PCH₂CO₂-κ²O,P)(PFur₃)] (5). The reactions of 1 with the dimers [{Rh(η⁵-C₅Me₅)Cl(μ-Cl)}₂] and [{Ru(η⁶-1,4-MeC₆H₄(CHMe₂))Cl(μ-Cl)}₂] (at 1-to-metal ratio 1:1) produce O,P-chelated complexes as well, albeit as stable adducts with the liberated Me₃SnCl: [RhCl(η⁵-C₅Me₅)(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (6) and[RuCl(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (8). The related complexes with P-monodentate (diphenylphosphino)acetic acid, [RhCl₂(η⁵-C₅Me₅)(Ph₂PCH₂CO₂H-κ,P)] (7) and [RuCl₂(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂H-κP)] (9), were obtained by bridge splitting in the dimers with the phosphinocarboxylic ligand. All new compounds were characterized by spectral methods and combustion analyses, and the structures of 2 · 3CH₂Cl₂, 3, 4, 5, 6 and 8 were determined by X-ray crystallography.     

Palladium(II)-allyl complexes containing chiral N-donor ferrocenyl ligands

A study of the reactivity of enantiopure ferrocenylimine (S_C)-[FcCHN-CH(Me)(Ph)] {Fc =  (η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-} (1a) with palladium(II)-allyl complexes [Pd(η³-1R¹,3R²-C₃H₃)(μ-Cl)]₂ {R¹ = H and R² = H (2), Ph (3) or R¹ = R² = Ph (4)} is reported. Treatment of 1a with 2 or 3 {in a molar ratio Pd(II):1a = 1} in CH₂Cl₂ at 298 K produced [Pd(η³-3R²-C₃H₄){FcCHN-CH(Me)(Ph)}Cl] {R² = H (5a) or Ph (6a)}. When the reaction was carried out under identical experimental conditions using complex 4 as starting material no evidence for the formation of [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(Ph)}Cl] (7a) was found. Additional studies on the reactivity of (S_C)-[FcCHN-CH(R³)(CH₂OH)] {R³ = Me (1b) or CHMe₂ (1c)} with complex 4 showed the importance of the bulk of the substituents on the palladium(II) allyl-complex (2-4) or on the ferrocenylimines (1) in this type of reaction. The crystal structure of 5a showed that: (a) the ferrocenylimine adopts an anti-(E) conformation and behaves as an N-donor ligand, (b) the chloride is in acis-arrangement to the nitrogen and (c) the allyl group binds to the palladium(II) in a η³-fashion. Solution NMR studies of 5a and 6a and [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(CH₂OH)}Cl] (7b) revealed the coexistence of several isomers in solution. The stoichiometric reaction between 6a and sodium diethyl 2-methylmalonate reveals that the formation of the achiral linear trans-(E) isomer of Ph-CHCH-CH₂Nu (8) was preferred over the branched derivative (9). A comparative study of the potential utility of ligand 1a, complex 5a and the amine (S_C)-H₂N-CH(Me)(Ph) (11) as catalysts in the allylic alkylation of (E)-3-phenyl-2-propenyl (cinnamyl) acetate with the nucleophile diethyl 2-methylmalonate (Nu⁻) is reported.     

Synthesis and characterization of palladium(II) complexes with chiral aminophosphine ligands: Catalytic behaviour in asymmetric hydrovinylation. Crystal structure of cis-[PdCl2(PPh((R)-NHCHCH3Ph)2)2]

Optically active ligands of type Ph₂PNHR (R = (R)-CHCH₃Ph, (a); (R)-CHCH₃Cy, (b); (R)-CHCH₃Naph, (c)) and PhP(NHR)₂ (R = (R)-CHCH₃Ph, (d); (R)-CHCH₃Cy, (e)) with a stereogenic carbon atom in the R substituent were synthesized. Reaction with [PdCl₂(COD)₂] produced [PdCl₂P₂] (1) (P = PhP(NHCHCH₃Ph)₂), whose molecular structure determined by X-ray diffraction showed cis disposition for the ligands. All nitrogen atoms of amino groups adopted S configuration. The new ligands reacted with allylic dimeric palladium compound [Pd(η³-2-methylallyl)Cl]₂ to gave neutral aminophosphine complexes [Pd(η³-2-methylallyl)ClP] (2a-2e) or cationic aminophosphine complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3a-3e) in the presence of the stoichiometric amount of AgBF₄. Cationic complexes [Pd(η⁴3-2-methylallyl)(NCCH₃)P]BF₄ (4a-4e) were prepared in solution to be used as precursors in the catalytic hydrovinylation of styrene. ³¹P NMR spectroscopy showed the existence of an equilibrium between the expected cationic mixed complexes 4, the symmetrical cationic complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3) and [Pd(η³-2-methylallyl)(NCCH₃)₂]BF₄ (5) coming from the symmetrization reaction. The extension of the process was studied with the aminophosphines (a-e) as well as with nonchiral monodentate phosphines (PCy₃ (f), PBn₃ (g), PPh₃ (h), PMe₂Ph (i)) showing a good match between the extension of the symmetrization and the size of the phosphine ligand. We studied the influence of such equilibria in the hydrovinylation of styrene because the behaviour of catalytic precursors can be modified substantially when prepared ‘in situ’. While compounds 3 and bisacetonitrile complex 5 were not active as catalysts, the [Pd(η³-2-methylallyl)(η²-styrene)₂]⁺ species formed in the absence of acetonitrile showed some activity in the formation of codimers and dimers. Hydrovinylation reaction between styrene and ethylene was tested using catalytic precursors solutions of [Pd(η³-2-methylallyl)LP]BF₄ ionic species (L = CH₃CN or styrene) showing moderate activity and good selectivity. Better activities but lower selectivities were found when L = styrene. Only in the case of the precursor containing Ph₂PNHCHCH₃Ph (a) ligand was some enantiodiscrimination (10%) found.     

Schiff bases containing ferrocenyl and thienyl units and their utility in the palladium catalyzed allylic alkylation of cinnamyl acetate

The synthesis and characterization of two new ferrocenyl Schiff bases: [Fc-CHN-(CH₂)_n-(C₄H₃S)] (2) {Fc represents (η⁵-C₅H₅)Fe(η⁵-C₅H₄)- and n = 1(2a) or 2(2b)} containing the thienyl (C₄H₃S) group are reported. NMR studies indicate that 2 have the anti-(E) conformation in solution and the X-ray crystal structure of 2a confirms that it also adopts the anti-(E) form in the solid state. Ligands 2 have been tested in the palladium catalyzed allylic alkylation of (E)-3-phenyl-2-propen-1-yl (cinnamyl) acetate using sodium diethyl 2-methylmalonate as nucleophile. The reaction of 2 with [Pd(η³-1-Ph-C₃H₄)(μ-Cl)]₂ in the presence of a slight excess K[PF₆] produced [Pd(η³-1-Ph-C₃H₄){Fc-CHN-(CH₂)_n-(C₄H₃S)}][PF₆] {n = 1(5a) or 2(5b)}, which are the intermediates of this catalytic process. NMR studies of 5 reveal the coexistence of several isomers in solution. The stoichiometric reactions of 5 with the nucleophile are also reported. The comparison of the results obtained for 2, [Fc-CHN-(C₆H₄-2SMe)] (1a) and [(2,4,6-Me₃-C₆H₂)-CHN-(C₆H₄-2SMe)] (1b) has allowed to establish the importance of the nature of the substituents on the imine group on the regioselectivity of the process.     

Synthesis and structure of dipalladium complexes containing cyclooctatetraene and bicyclooctatrienyl ligands

The reaction of a substitutionally labile dipalladium(I) complex [Pd₂(CH₃CN)₆][BF₄]₂ (1) with 1,3,5,7-cyclooctatetraene (COT) in acetonitrile afforded [Pd₂(μ-η³:η³-C₈H₈)(CH₃CN)₄][BF₄]₂ (2). The reaction of 2 with COT in acetonitrile yielded [Pd₂(μ-η³:η³-C₁₆H₁₆)(CH₃CN)₄][BF₄]₂ (4), where COT is dimerized via C-C bond formation. Complexes 2 and 4 were structurally characterized by X-ray diffraction analyses. In dichloromethane, COT isomerized to styrene at room temperature in the presence of catalytic amount of 1, 2, or 4.     

Construction of optically active multimetallic systems of rhodium(I), palladium(II), and ruthenium(II) with a P-chiral tetraphosphine ligand

The treatment of optically P-chiral tetraphosphine, (3S,6R,9R,12S)-6,9-di-tert-butyl-2,2,3,12,13,13-hexamethyl-3,6,9,12-tetraphosphatetradecane (1), with rhodium(I), palladium(II), and ruthenium(II) complex precursors led to the selective formation of mono-, di-, or trinuclear homo- or heterometallic complexes, [Rh(1)]SbF₆ (4), [{Rh(nbd)}₂(1)](SbF₆)₂ (3), [{Pd(η³-allyl)}₂(1)](SbF₆)₂ (5), [{RuCl(η⁵-C₅(CH₃)₅)}₂(1)] (6), and [{RuCl₂(η⁶-benzene)}₂(PdCl₂)(1)] (8). These complexes were characterized by NMR and X-ray crystallographic analysis.     

Preparation and crystallographic characterization of Pd(II) complexes containing imidobis(diphenylthiophosphinato) ligand

The reactions of PdCI₂(L-L) [L-L = Ph₂PCH₂PPh₂(dppm), Ph₂PCH₂CH₂PPh₂(dppe) and Ph₂PCH₂CH₂CH₂PPh₂(dppp)] with equivalent amount of (Ph₂P(S)NHP(S)Ph₂)(dppaS₂) gave the complexes [Pd(L-L)(dppaS₂-H)]ClO₄ [L-L = dppm (1), dppe (2), dppp (3)]. The different synthetic route was used for complex 2 by using of Pd(dppe)Cl₂ and K[N(PSPh₂)₂] as starting materials (2a). All of these complexes have been characterized ³¹P{¹H} NMR, IR and elemental analyses. The complexes 2, 2a and 3 were crystallographically characterized. The coordination geometry around the Pd atoms in these complexes distorted square planar. Six membered dppaS₂-H rings are twist boat conformations in three complexes.     

Ruthenium(II), copper(I) and silver(I) complexes of large bite bisphosphinite, bis(2-diphenylphosphinoxynaphthalen-1-yl)methane: Application of Ru(II) complexes towards the hydrogenation of styrene and phenylacetylene

Ruthenium(II), copper(I) and silver(I) complexes of large bite bisphosphinite Ph₂P{(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)}PPh₂ (1) are described. Reactions of bisphosphinite 1 with [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ and RuCl₂(PPh₃)₃ afford mono- and bis-chelate complexes [RuCl(η⁶-p-cymene){η²-Ph₂P{(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)}PPh₂-κP,κP}]Cl (2) and trans-[RuCl₂{η²-Ph₂P{(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)}PPh₂-κP,κP}₂] (3), respectively. Treatment of 1 with CuX (X = Cl, Br and I) furnish 10-membered chelate complexes of the type [Cu(X){η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}] (4, X = Cl; 5, X = Br; 6, X = I), whereas [Cu(MeCN)₄]PF₆ affords a bis-chelated cationic complex [Cu{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}₂][PF₆] (7). Reaction between 1 and AgOTf produce both mono- and bis-chelated complexes [Ag{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}(SO₃CF₃)] (8) and [Ag{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}₂][SO₃CF₃] (9), respectively; whereas the similar reaction of 1 with[Ag(OTf)PPh₃] affords chelate complex of the type [Ag{η²-Ph₂P(-OC₁₀H₆)(μ-CH₂)(C₁₀H₆O-)PPh₂-κP,κP}(PPh₃)(SO₃CF₃)] (10). All the complexes were characterized by ¹H NMR, ³¹P NMR, elemental analysis and mass spectrometry, including low-temperature NMR studies in the case of silver complexes. The molecular structures of 4 and 6 are determined by X-ray diffraction studies. Ruthenium complexes 2 and 3 promote catalytic hydrogenation of styrene and phenylacetylene with good turnover numbers.     

Titanium(IV) carboxylate complexes: Synthesis,structural characterization and cytotoxic activity

Four titanium(IV) carboxylate complexes [Ti(η⁵-C₅H₅)₂(O₂CCH₂SMes)₂] (1), [Ti(η⁵-C₅H₄Me)₂(O₂CCH₂SMes)₂] (2), [Ti(η⁵-C₅H₅)(η⁵-C₅H₄SiMe₃)(O₂CCH₂SMes)₂] (3) and [Ti(η⁵-C₅Me₅)(O₂CCH₂SMes)₃] (4; Mes = 2,4,6-Me₃C₆H₂) have been synthesised by the reaction of the corresponding titanium derivatives [Ti(η⁵-C₅H₅)₂Cl₂], [Ti(η⁵-C₅H₄Me)₂Cl₂], [Ti(η⁵-C₅H₅)(η⁵-C₅H₄SiMe₃)Cl₂] and [Ti(η⁵-C₅Me₅)Cl₃] and two (for 1–3) or three (for 4) equivalents of mesitylthioacetic acid. Complexes 1–4 have been characterized by spectroscopic methods and the molecular structure of the complexes 1, 2 and 4 have been determined by X-ray diffraction studies. The cytotoxic activity of 1–4 was tested against tumor cell lines human adenocarcinoma HeLa, human myelogenous leukemia K562, human malignant melanoma Fem-x, and normal immunocompetent cells, that is peripheral blood mononuclear cells PBMC and compared with those of the reference complexes [Ti(η⁵-C₅H₅)₂Cl₂] (R1), [Ti(η⁵-C₅H₄Me)₂Cl₂] (R2), [Ti(η⁵-C₅H₅)(η⁵-C₅H₄SiMe₃)Cl₂] (R3) and cisplatin. In all cases, the cytotoxic activity of the carboxylate derivatives was higher than that of their corresponding dichloride analogues, indicating a positive effect of the carboxylato ligand on the final anticancer activity. Complexes 1–4 are more active against K562 (IC₅₀ values from 72.2 to 87.9 μM) than against HeLa (IC₅₀ values from 107.2 to 142.2 μM) and Fem-x cells (IC₅₀ values from 90.2 to 191.4 μM).     

Preparation and characterization of cobalt-containing P,N-ligands and an unusual palladium complex ion pair: their applications in amination reactions

Several cobalt-containing P,N-ligands, alkyne-bridged dicobalt phosphines [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-Me₂NCH₂CCPR₂)] (4a: R=^tBu; 4b: R=Ph; 4c: R=Cy), were prepared from the reactions of corresponding alkynylphosphines Me₂NCH₂CCPR₂ (2a: R=^tBu; 2b: R=Ph; 2c: R=Cy) with a dppm-bridged dicobalt complex [Co₂(CO)₆(μ-P,P-PPh₂CH₂PPh₂)] 3. A unique palladium complex ion pair [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-Me₂NCH₂CCP (^tBu)₂)Pd(η³-C₃H₅)]⁺[(η³-C₃H₅)PdCl₂]⁻7a was obtained from the reaction of 4a with [(η³-C₃H₅)PdCl]₂. Compounds 4a, 4b, and 4c are authentic cobalt-containing P,N-bidentate ligands and can be used for ligation of palladium from various sources such as Pd(OAc)₂ or [(η³-C₃H₅)PdCl]₂. Satisfactory efficiencies were observed for the amination reactions of aryl bromides with morpholine employing either a 4a-chelated palladium complex formed in situ or pre-formed 7a as the catalytic precursor.