Diphenylphosphinite ionic liquid (IL-OPPh2): A solvent and ligand for palladium-catalyzed silylation and dehalogenation reaction of aryl halides with triethylsilane

The use of an imidazolium-based phosphinite ionic liquid (IL-OPPh₂) as both solvent and ligand for Pd offers an efficient catalytic system for silylation of aryl iodides, bromides and also chlorides by triethylsilane in the presence of Cs₂CO₃. In the absence of base, this system is also performed for catalytic dehalogenation of aryl halides. The ionic liquid containing its corresponding Pd(0) complex can be easily recovered and reused in several runs without losing its efficiency.     

Sonogashira reaction of aryl halides with propiolaldehyde diethyl acetal catalyzed by a tetraphosphine/palladium complex

All-cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyzes the Sonogashira reaction of propiolaldehyde diethyl acetal with a variety of aryl bromides and chlorides. A minor electronic effect of the substituents of the aryl bromide was observed. Similar reaction rates were observed in the presence of activated aryl bromides such as 4-trifluoromethylbromobenzene and deactivated aryl bromides such as bromoanisole. Turnover numbers up to 95,000 can be obtained for this reaction. Even aryl chlorides and heteroarylbromides or chlorides have been successfully alkynylated with this catalyst. Moreover, a wide variety of substituents on the aryl halide such as fluoro, trifluoromethyl, acetyl, benzoyl, formyl, nitro, dimethylamino or nitrile are tolerated.     

Suzuki Coupling of Cyclopropylboronic Acid With Aryl Halides Catalyzed by a Palladium–Tetraphosphine Complex

The tetraphosphine all‐cis‐1,2,3,4‐tetrakis(diphenylphosphinomethyl)cyclopentane (Tedicyp) in combination with [Pd(C₃H₅)Cl]₂ affords a very efficient catalyst for the coupling of cyclopropylboronic acid with aryl bromides and aryl chlorides. Higher reactions rates were observed with aryl bromides than with aryl chlorides; however, even in the presence of 1–0.4% of catalyst, a few aryl chlorides gave the coupling products in good yields. A wide variety of substituents such as alkyl, methoxy, trifluoromethyl, acetyl, benzoyl, formyl, carboxylate, nitro, and nitrile on the aryl halides are tolerated. The coupling reaction of sterically very congested aryl bromides such as bromomesitylene or 2,4,6‐triisopropylbromobenzene also proceeds in good yields.     

Palladium-catalyzed cross-coupling of trimethoxysilylbenzene with aryl bromides and chlorides using phosphite ligands

Phosphites were employed as ligands in palladium-catalyzed Hiyama coupling reactions. The optimized reaction conditions were equimolar amounts (5 mol % each) of Pd(acac)₂ and phosphite 1 in p-xylene at 80 °C with TBAF as an additive. This catalyst system exhibited high activities in the reactions with trimethoxysilylbenzene and aryl bromides that have electron-donating or electron-withdrawing groups. In the case of aryl chlorides, substrates possessing electron-withdrawing groups gave the coupled products in high yields.     

Tetraphosphine/palladium catalysed Suzuki cross-coupling reactions of aryl halides with alkylboronic acids

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as a catalyst, a range of aryl bromides and chlorides undergoes Suzuki cross-coupling with alkylboronic acids in good yields. Several alkyl substituents such as ethyl, n-butyl, n-octyl, isobutyl or 2,2-dimethylpropyl on the alkylboronic acids have been successfully used. The functional group tolerance on the aryl halide is remarkable; substituents such as fluoro, methyl, methoxy, acetyl, formyl, benzoyl, nitro or nitrile are tolerated. Furthermore, this catalyst can be used at low loading, even for reactions of sterically hindered aryl bromides.     

Room temperature dehalogenation of (hetero)aryl halides with magnesium/methanol

Magnesium in methanol was found to be an effective and inexpensive reagent for the dehalogenation of (hetero)aryl chlorides, bromides and iodides under mild conditions. The halogen/hydrogen exchange proceeded at room temperature and tolerated functional groups such as esters, nitriles, alcohols, and alkenes.     

Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

A highly efficient memantine-modified palladium catalyst for Suzuki–Miyaura cross-coupling reaction

A new simple Pd(memantine)₂Cl₂ complex was synthesized and characterized by ¹H NMR, ¹³C NMR and X-ray single crystal structure determination. The Suzuki–Miyaura reaction of aryl bromides catalyzed by Pd(memantine)₂Cl₂ complex was investigated in air with different temperature. The high turnover numbers of 650,000 have been obtained in the reaction of 4-bromonitrobenzene with phenylboronic acid at 80 °C. At room temperature, the complex also showed high activity for Suzuki–Miyaura cross-coupling reaction of aryl bromides with a wide range of functional groups under air, and the turnover number of up to 99,000 was achieved. The catalytic system also gives good yields toward the reaction of several heteroaryl bromides with thiophenylboronic acid.     

[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

Cross-coupling and dehalogenation reactions catalyzed by (N-heterocyclic carbene)Pd(allyl)Cl complexes

A series of well-defined, air- and moisture-stable (NHC)Pd(allyl)Cl (NHC = N-heterocyclic carbene) complexes has been used in several catalytic reactions: Suzuki-Miyaura cross-coupling, catalytic dehalogenation of aryl halides, and aryl amination. The scope of the three processes using various substrates was examined. A general system involving the use of (IPr)Pd(allyl)Cl as catalyst and NaO(t)Bu as base has proven to be highly active for the Suzuki-Miyaura cross-coupling of activated and unactivated aryl chlorides and bromides, for the catalytic dehalogenation of aryl chlorides, and for the catalytic aryl amination of aryl triflates. All reactions proceed in short reaction times and at mild temperatures. The system has also proven to be compatible with the microwave-assisted Suzuki-Miyaura cross-coupling and catalytic dehalogenation processes, affording yields similar to those of the conventionally heated analogous reactions.     

An inexpensive cyclodiphosphazane as an efficient ligand for the palladium-catalyzed amination of aryl bromides and chlorides

An economic and novel ligand, cyclodiphosphazane [ClPN(t-Bu)]₂ (1), was introduced in the palladium-catalyzed amination of unactivated aryl halides. The catalyst allows for the amination of aryl chlorides and bromides with secondary cyclic amines and anilines in good yields.     

An efficient catalyst system for diaryl ether synthesis from aryl chlorides

The combination of 2-phosphino-substituted N-arylpyrroles or related indoles (cataCXium^®P) and Pd(OAc)₂ allows for efficient cross-coupling reactions of aryl chlorides and phenols to give diaryl ethers. A variety of aryl and heteroaryl chlorides can be coupled with substituted phenols showing unprecedented catalyst turnover numbers.     

Cyclopalladated ferrocenylimines: efficient catalysts for homocoupling and Sonogashira reaction of terminal alkynes

A novel pathway for homocoupling of terminal alkynes has been described using cyclopalladated ferrocenylimine 1 or 2/CuI as catalyst in the air. This catalytic system could tolerate several functional groups. The palladacycle 2 in the presence of n-Bu₄NBr as an additive could be applied to Sonogashira cross-coupling reaction of aryl iodides, aryl bromides, and some activated aryl chlorides with terminal alkynes under amine- and copper-free conditions, mostly to give moderate to excellent yields.     

Direct catalytic C–H arylation of imidazo[1,2-a]pyridine with aryl bromides using magnetically recyclable Pd–Fe3O4 nanoparticles

The direct C–H arylation of a heteroarene with aryl bromides has been achieved under the catalysis of magnetic nanoparticles. In the presence of bimetallic Pd–Fe₃O₄ heterodimer nanocrystals (1 mol % in palladium), the reaction of imidazo[1,2-a]pyridine with various aryl bromides gives the corresponding arylated products with exclusive C3-selectivity. The highly regioselective method is applicable to a wide range of aryl bromides with varying electronic and steric properties. The Pd–Fe₃O₄ nanocrystals can be recoverable by simple magnetic separation and have been recycled ten times without loss of catalytic activity.     

Effects of solvent and base on the palladium-catalyzed amination: PdCl2(Ph3P)2/Ph3P-catalyzed selective arylation of primary anilines with aryl bromides

A readily accessible catalytic system, PdCl₂(Ph₃P)₂/Ph₃P, was developed for the selective arylation of primary anilines with aryl bromides. The strong influence of solvents and bases on the catalytic activity was observed. In refluxing o-xylene, triphenylphosphine shows high efficiency for Pd-catalyzed intermolecular amination reactions. By changing the bases, mono- and diarylation of primary amines could be selectively achieved in high yields. Moreover, the catalytic system showed good toleration for the steric hindrance of anilines. A series of N,N,N′,N′-tetraaryl-1,1′-biphenyl-4,4′-diamines, important intermediates of OLED hole transport materials, were synthesized facilely via coupling reactions between 4,4′-diaminobiphenyls and aryl bromides.     

Direct arylation of oxazole and benzoxazole with aryl or heteroaryl halides using a palladium-diphosphine catalyst

Through the use of PdCl(dppb)(C₃H₅) as a catalyst, a range of aryl bromides and chlorides undergoes coupling via C-H bond activation/functionalization reaction with oxazole or benzoxazole in good yields. This air-stable catalyst can be used at low loadings with several substrates. Surprisingly, better results in terms of substrate/catalyst ratio were obtained in several cases using electron-excessive aryl bromides than with the electron-deficient ones. This seems to be mainly due to the relatively low thermal stability of some of the 2-arylbenzoxazoles formed with electron-deficient aryl halides. With these substrates, in order to obtain higher yields of product, the reactions had to be performed at a lower temperature (100-120 °C) using a larger amount of catalyst. On the other hand, in the presence of the most stable products, the reactions were performed at 150 °C using as little as 0.2 mol% catalyst. Arylation of benzoxazole with heteroaryl bromides also gave the coupling products in moderate to high yields using 0.2-5 mol% catalyst. With this catalyst, electron-deficient aryl chloride such as 4-chlorobenzonitrile, 4-chloroacetophenone or 2-chloronitrobenzene have also been used successfully.     

Imidazolium-based phosphinite ionic liquid (IL-OPPh2) as Pd ligand and solvent for selective dehalogenation or homocoupling of aryl halides

The use of an imidazolium-based phosphinite ionic liquid (IL-OPPh₂) as ligand for Pd offers an efficient reagent system for the selective dehalogenation or homocoupling of aryl halides in the presence of NaOPrⁱ or Et₃N, respectively. This ionic liquid plays a dual role as both the reaction media and also as the potential complexing agent with Pd via its phosphinite carrying group. The ionic liquid containing its corresponding Pd complex can be easily recovered and reused in several runs.     

The influence of the nature of phosphine ligand on palladium catalysts for cross-coupling of weakly nucleophilic potassium pentafluorophenyltrifluoroborate with ArHal and PhCH2Hal (Hal=Br,Cl)

The influence of the ligand nature on catalytic activity of palladium catalysts for cross-coupling of weakly nucleophilic potassium pentafluorophenyltrifluoroborate, which imitates the behavior of electron-deficient organoboron reagents, with aryl halides, ArHal (Hal=Br, Cl) was studied. The activity of the catalysts generated in situ from Pd(OAc)₂ and appropriate phosphorous containing ligands and the reaction selectivity was found to depend on the nature of bulky phosphines used as ligands. As a result, conditions for involving the electron-deficient organoboron reagent—potassium pentafluorophenyltrifluoroborate—in the palladium-catalyzed cross-coupling with aryl bromides and aryl chlorides were identified. It was demonstrated that the chosen conditions are appropriate for the reaction of K[C₆F₅BF₃] with benzyl chloride and benzyl bromide deriving pentafluorophenylarylmethanes, C₆F₅CH₂Ar.     

Palladium-catalyzed hydrodehalogenation of aryl halides using paraformaldehyde as the hydride source: high-throughput screening by paper-based colorimetric iodide sensor

Paraformaldehyde was employed as a hydride source in the palladium-catalyzed hydrodehalogenation of aryl iodides and bromides. High throughput screening using a paper-based colorimetric iodide sensor (PBCIS) showed that Pd(OAc)₂ and Cs₂CO₃ were the best catalyst and base, respectively. Aryl iodides and bromides were hydrodehalogenated to produce the reduced arenes using Pd(OAc)₂ and Pd(PPh₃)₄ catalyst. This catalytic system showed good functional group tolerance. In addition, it was found that paraformaldehyde is the hydride source and the reducing agent for the formation of palladium nanoparticles.     

Selective synthesis of (E)-triethyl(2-arylethenyl)silane derivatives by reaction of aryl bromides with triethyl vinylsilane catalysed by a palladium-tetraphosphine complex

Cis, cis, cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane / 0.5 [PdCl(C₃H₅)]₂ system catalyses the Heck reaction of vinylsilane derivatives with a range of aryl bromides with high ratio substrate/catalyst in good yields. The formation of mixtures of styrene, (E)-triethyl(2-arylethenyl)silane and triethyl(1-arylethenyl)silane derivatives was observed in some cases. Very high selectivities (up to 100%) in favour of the formation of (E)-triethyl(2-arylethenyl)silane derivatives were obtained in the presence of sodium acetate as base. With other bases such as potassium carbonate, the formation of large amounts of styrene derivatives was observed. The reaction tolerates several functions such as fluoro, trifluoromethyl, methoxy, dimethylamino, acetyl, formyl, benzoyl, carboxylate, nitro or nitrile. Moreover, turnover numbers up to 10,000 can be obtained for this reaction.