Redistribution reactions of heteroleptic barium iodide derivatives: Synthesis and structures of trans-BaI2(DME)(triglyme), cis-BaI2(DME)(tetraglyme) and [Ba(tetraglyme)2]I2 · C7H8

The reaction between BaI₂ · 2H₂O and NaHFIP [HFIP = OCH(CF₃)₂] in a 1:1 stoichiometry gave the heterometallic compound NaBaI₂(HFIP)(H₂O)(THF)_0.5 (1). Attempts to recrystallize 1 in the presence of N- or O-donor ligands lead to redistribution reactions. Barium iodide adducts such as BaI₂(DME)₃ (2), trans-BaI₂(DME)(triglyme) (3) and cis-BaI₂(DME)(tetraglyme) (4) were isolated with DME as solvent. A similar behavior was observed for the reaction between BaI₂ · 2H₂O and NaTFA (TFA = O₂CCF₃) in a 1:1 stoichiometry in THF, and [Ba(tetraglyme)₂]I₂ · C₇H₈ (6) was isolated in the presence of excess tetraglyme. All compounds have been characterized by elemental analysis, IR and ¹H NMR as well as single crystal X-ray studies for 3, 4 and 6. Compounds 3 and 4 are covalent adducts with eight- and nine-coordinate barium, respectively. Compound 6 is an ionic compound where two tetraglyme ligands wrap the 10-coordinate barium cation in a helical fashion. The presence of DME actually allows the coordination number of barium in the mixed-ligand adducts 3 and 4 to be tuned. The average Ba–O bond lengths (2.80 for 3 to 2.87 Å for 6) reflect the coordination number of the metal. The same observation is valid for the average Ba–I bond distance, 3.442 for 3 vs. 3.536 Å for 4.     

Fluorous modification of 2,2′-bipyridine

A series of 2,2′-bipyridines featuring fluorinated alkyl groups [(CH₂)₃(CF₂)_xCF₃: x = 0, (1); 5, (2); 7, (3); 9 (4)] appended in the 4 and 4′ positions have been prepared. 1-4 were characterized by spectroscopy and physical methods including partition coefficient (biphase: perfluoromethylcyclohexane/toluene) and cyclic voltammetry (THF). Ab-initio calculations of vertical ionization potentials (VIPs) for 1-4 confirm the insulating role of the methylene spacers as the electrochemical reduction potentials of 1-4 are almost identical to that of 2,2′-bipyridine. Calculations for (CH₂)_nCF₃ derivatives (n = 0-10) describe a limit for impact of the CF₃ group through 9-10 methylenes. From both physical and theoretical data fluorinated alkyl groups of the formula (CH₂)₃(CF₂)_xCF₃ [x = 0-9] are inductively equivalent to a hydrogen substituent when appended to the bipyridine moiety.     

Trifluoromethylation of carbon and boron with CF3SiMe3/NMe4F: formation of NMe4[trans-CF3CFCFB(CF3)3]

Trimethylamine-trifluoroethenyl-bis(trifluoromethyl)borane [F₂CCF(CF₃)₂B·NMe₃] (1) reacts with NMe₄[(CF₃)₂SiMe₃] in THF solution to form trimethylamine-bis(trifluoromethyl)pentafluoropropenylborane [trans-CF₃CFCF(CF₃)₂B·NMe₃] (3), the fluoroborate NMe₄[trans-CF₃CFCF(CF₃)₂BF] (4), the novel borates NMe₄[trans-CF₃CFCFB(CF₃)₃] (5) and NMe₄[cyclo-(CF₃)₂BCF₂CFCF₂CF₃] (6).     

Mono- and bimetallic platinum(II) and palladium(II) complexes containing fluorinated benzothiolates

The new mononuclear palladium(II) and platinum(II) [M(p-SC₆F₄(CF₃))₂(dppe)] complexes M = Pd 1a, Pt 2a; [M(o-SC₆H₄(CF₃))₂(dppe)] M = Pd 1d, Pt 2d as well as the previously known [M(SC₆F₅)₂(dppe)] M = Pd 1b, Pt 2b and [M(p-SC₆HF₄)₂(dppe)] M = Pd 1c, Pt 2c, have been used as metalloligands for the preparation of the heteroleptic bimetallic complexes [M₂(μ-SRf)₂(dppe)₂](SO₃CF₃)₂ M = Pd, Rf = p-C₆F₄(CF₃) 3a, C₆F₅3b, p-C₆HF₄3c, o-C₆H₄(CF₃) 3d; M = Pt, Rf = p-C₆F₄(CF₃) 4a, C₆F₅4b, p-C₆HF₄4c and o-C₆H₄(CF₃) 4d. Variable temperature ¹⁹F NMR experiments show that the fluorothiolate bridged bimetallic compounds are fluxional in solution whereas mononuclear complexes are not. The solid state X-ray diffraction structures of [Pd(p-SC₆HF₄)₂(dppe)] (1c), [Pt(SC₆F₅)₂(dppe)] (2b) and [Pt(o-SC₆H₄(CF₃))₂(dppe)] (2d) show square-planar coordination around the metal centers. The solid state molecular structure of the compound [Pt₂(μ-o-SC₆H₄(CF₃))₂(dppe)₂](SO₃CF₃)₂ (4d), exhibit a planar [Pt₂(μ-S)₂] ring with the sulfur substituents in an anti configuration.     

Synthesis, characterization and reactivity of tribenzylphosphine rhodium and iridium complexes

New rhodium and iridium complexes, with the formula [MCl(PBz₃)(cod)] [M = Rh (1), Ir (2)] and [M(PBz₃)₂(cod)]PF₆ [M = Rh (3), Ir (4)] (cod = 1,5-cyclooctadiene), stabilized by the tribenzylphosphine ligand (PBz₃) were synthesized and characterized by elemental analysis and spectroscopic methods. The molecular structures of 1 and 2 were determined by single-crystal X-ray diffraction. The addition of pyridine to a methanol solution of 1or 2, followed by metathetical reaction with NH₄PF₆, gave the corresponding derivatives [M(py)(PBz₃)(cod)]PF₆ [M = Rh (5), Ir (6)]. At room temperature in CHCl₃ solution, 4 converted spontaneously to the ortho-metallated complex [IrH(PBz₃)(cod){η²-P,C-(C₆H₄CH₂)PBz₂}]PF₆ (7) as a mixture of cis/trans isomers via intramolecular C-H activation of a benzylic phenyl ring. The reaction of 3 or 4 with hydrogen in coordinating solvents gave the dihydrido bis(solvento) derivative [M(H)₂(S)₂(PBz₃)₂]PF₆ (M = Rh, Ir; S = acetone, acetonitrile, THF), that transformed into the corresponding dicarbonyls [M(H)₂(CO)₂(PBz₃)₂]PF₆ by treatment with CO. Analogous cis-dihydrido complexes [M(H)₂(THF)₂(py)(PBz₃)₂]PF₆ (M = Rh, Ir) were observed by reaction of the py derivatives 5 and 6 with H₂.     

Novel hydridotris(pyrazolyl)borate ruthenium(II) complexes containing the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane: Synthesis and evaluation of DNA binding properties

A series of half-sandwich ruthenium(II) complexes containing κ³(N,N,N)-hydridotris(pyrazolyl)borate (κ³(N,N,N)-Tp) and the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane (PTA) [RuX{κ³(N,N,N)-Tp}(PPh₃)_2−n(PTA)_n] (n = 2, X = Cl (1), n = 1, X = Cl (2), I (3), NCS (4), H (5)) and [Ru{κ³(N,N,N)-Tp}(PPh₃)(PTA)L][PF₆] (L = NCMe (6), PTA (7)) have been synthesized. Complexes containing 1-methyl-3,5-diaza-1-azonia-7-phosphaadamantane(m-PTA) triflate [RuCl{κ³(N,N,N)-Tp}(m-PTA)₂][CF₃SO₃]₂ (8) and [RuX{κ³(N,N,N)-Tp}(PPh₃)(m-PTA)][CF₃SO₃] (X = Cl (9), H (10)) have been obtained by treatment, respectively, of complexes 1, 2 and 5 with methyl triflate. Single crystal X-ray diffraction analysis for complexes 1, 2 and 4 have been carried out. DNA binding properties by using a mobility shift assay and antimicrobial activity of selected complexes have been evaluated.     

Syntheses, structures and reactivities of diindenyl-coordinated diiron bridging carbene complexes

Compound [Fe₂(μ-CO)₂(CO)₂(η⁵-C₉H₇)₂] (1) reacts with aryllithium reagents, ArLi (Ar = C₆H₅, p-CH₃C₆H₄, p-CF₃C₆H₄) followed by alkylation with Et₃OBF₄ to give the diindenyl-coordinated diiron bridging alkoxycarbene complexes [Fe₂{μ-C(OC₂H₅)Ar}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (2, Ar = C₆H₅; 3, Ar = p-CH₃C₆H₄, 4, Ar = p-CF₃C₆H₄). Complex 4 reacts with HBF₄ · Et₂O at low temperature to yield cationic bridging carbyne complex [Fe₂(μ-CC₆H₄CF₃-p)(μ-CO)(CO)₂(η⁵-C₉H₇)₂]BF₄ (5). Cationic 5 reacts with NaBH₄ in THF at low temperature to afford diiron bridging arylcarbene complex [Fe₂{μ-C(H)C₆H₄CF₃-p}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (6). The reaction of 5 with NaSC₆H₄CH₃-p under the similar conditions gave the bridging arylthiocarbene complex [Fe₂{μ-C(C₆H₄CF₃-p)SC₆H₄CH₃-p}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (7). Complex 5 can also react with carbonylmetal anionic compounds Na[M(CO)₅(CN)] (M = Cr, Mo, W) to produce the diiron bridging aryl(penta-carbonylcyanometal)carbene complexes [Fe₂{μ-C(C₆H₄CF₃-p)NCM(CO)₅}(μ-CO)(CO)₂(η⁵-C₉H₇)₂] (8, M = Cr; 9, M = Mo; 10, M = W). The structures of complexes 4, 6, 7, and 10 have been established by X-ray diffraction studies.     

Synthesis and reactivity of ruthenium complexes with 1,1′-dithiolate ligands

Reactions of [Ru(PPh₃)₃Cl₂] with ROCS₂K in THF at room temperature and at reflux gave the kinetic products trans-[Ru(PPh₃)₂(S₂COR)₂] (R = ⁿPr 1, ⁱPr 2) and the thermodynamic products cis-[Ru(PPh₃)₂(S₂COR)₂] (R = ⁿPr 3, ⁱPr 4), respectively. Treatment of [RuHCl(CO)(PPh₃)₃] with ROCS₂K in THF afforded [RuH(CO)-(S₂COR)(PPh₃)₂] (R = ⁿPr 5, ⁱPr 6) as the sole isolable products. Reaction of [RuCl₂(PPh₃)₃] with tetramethylthiuram disulfide [Me₂NCS₂]₂ gave a Ru(III) dithiocarbamate complex, [Ru(PPh₃)₂(S₂CNMe₂)Cl₂] (7). This reaction involved oxidation of ruthenium(II) to ruthenium(III) by the disulfide group in [Me₂NCS₂]₂. Treatment of 7 with 1 equiv. of [M(MeCN)₄][ClO₄] (M = Cu, Ag) gave the stable cationic ruthenium(III)-alkyl complexes [Ru{C(NMe₂)QC(NMe₂)S}(S₂CNMe₂)(PPh₃)₂][ClO₄] (Q = O 8, S 9) with ruthenium-carbon bonds. The crystal structures of complexes 1, 2, 4·CH₂Cl₂, 6, 7·2CH₂Cl₂, 8, and 9·2CH₂Cl₂ have been determined by single-crystal X-ray diffraction. The ruthenium atom in each of the above complexes adopts a pseudo-octahedral geometry in an electron-rich sulfur coordination environment. The 1,1′-dithiolate ligands bind to ruthenium with bite S-Ru-S angles in the range of 70.14(4)-71.62(4)°. In 4·CH₂Cl₂, the P-Ru-P angle for the mutually cis PPh₃ ligands is 103.13(3)°, the P-Ru-P angles for other complexes with mutually trans PPh₃ ligands are in the range of 169.41(4)-180.00(6)°. The alkylcarbamate [C(NMe₂)QC(NMe₂)S]⁻ (Q = O, S) ligands in 8 and 9 are planar and bind to the ruthenium centers via the sulfur and carbon atoms from the CS and NC double bonds, respectively. The Ru-C bond lengths are 1.975(5) and 2.018(3) Å for 8 and 9·2CH₂Cl₂, respectively, which are typical for ruthenium(III)-alkyl complexes. Spectroscopic properties along with electrochemistry of all complexes are also reported in the paper.     

Synthesis, characterization, protonation studies and X-ray crystal structure of ReH5(PPh3)2(PTA) (PTA = 1,3,5-triaza-7-phosphaadamantane)

The novel rhenium pentahydride complex [ReH₅(PPh₃)₂(PTA)] (2) was synthesized by dihydrogen replacement from the reaction of [ReH₇(PPh₃)₂] with PTA in refluxing THF. Variable temperature NMR studies indicate that 2 is a classic polyhydride (T_1(min) = 133 ms). This result agrees with the structure of 2, determined by X-ray crystallography at low temperature. The compound shows high conformational rigidity which allows for the investigation of the various hydride-exchanging processes by NMR methods. Reactions of 2 with equimolecular amounts of either HFIP or HBF₄ · Et₂O at 183 K afford [ReH₅(PPh₃)₂{PTA(H)}]⁺ (3) via protonation of one of the nitrogen atoms on the PTA ligand. When 5 equivalents of HBF₄ · Et₂O are used, additional protonation of one hydride ligand takes place to generate the thermally unstable dication [ReH₄(η²-H₂)(PPh₃)₂{PTA(H)}]²⁺ (4), as confirmed by ¹H NMR and T₁ analysis. IR monitoring of the reaction between 2 and CF₃COOD at low temperature shows the formation of the hydrogen bonded complex [ReH₅(PPh₃)₂{PTA?DOC(O)CF₃}] (5) and of the ionic pair [ReH₅(PPh₃)₂{PTA(D)?OC(O)CF₃}] (6) preceding the proton transfer step leading to 3.     

Olefin-aminocarbyne coupling in diiron complexes: Synthesis of new bridging aminoallylidene complexes

The bridging aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; Xyl, 1b; 4-C₆H₄OMe, 1c; Xyl = 2,6-Me₂C₆ H₃) react with acrylonitrile or methyl acrylate, in the presence of Me₃NO and NaH, to give the corresponding μ-allylidene complexes [Fe₂{μ-η¹:η³- C_α(N(Me)(R))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = CN, 3a; R = Xyl, R′ = CN, 3b; R = 4-C₆H₄OMe, R′ = CN, 3c; R = Me, R′ = CO₂Me, 3d; R = 4-C₆H₄OMe, R′ = CO₂Me, 3e). Likewise, 1a reacts with styrene or diethyl maleate, under the same reaction conditions, affording the complexes [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(R′)C_γ(H)(R″)}(μ-CO)(CO)(Cp)₂] (R′ = H, R″ = C₆H₅, 3f; R′ = R″ = CO₂Et, 3g). The corresponding reactions of [Ru₂{μ-CN(Me)(CH₂Ph)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (1d) with acrylonitrile or methyl acrylate afford the complexes [Ru₂{μ-η¹:η³-C_α(N(Me)(CH₂Ph))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R′ = CN, 3h; CO₂Me, 3i), respectively.The coupling reaction of olefin with the carbyne carbon is regio- and stereospecific, leading to the formation of only one isomer. C-C bond formation occurs selectively between the less substituted alkene carbon and the aminocarbyne, and the C_β-H, C_γ-H hydrogen atoms are mutually trans.The reactions with acrylonitrile, leading to 3a-c and 3h involve, as intermediate species, the nitrile complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NC-CHCH₂)(Cp)₂][SO₃CF₃] (M = Fe, R = Me, 4a; M = Fe, R = Xyl, 4b; M = Fe, R = 4-C₆H₄OMe, 4c; M = Ru, R = CH₂C₆H₅, 4d).Compounds 3a, 3d and 3f undergo methylation (by CH₃SO₃CF₃) and protonation (by HSO₃CF₃) at the nitrogen atom, leading to the formation of the cationic complexes [Fe₂{μ-η¹:η³-C_α(N(Me)₃)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 5a; R = CO₂Me, 5b; R = C₆H₅, 5c) and [Fe₂{μ-η¹:η³-C_α(N(H)(Me)₂)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 6a; R = CO₂Me, 6b; R = C₆H₅, 6c), respectively.Complex 3a, adds the fragment [Fe(CO)₂(THF)(Cp)]⁺, through the nitrile functionality of the bridging ligand, leading to the formation of the complex [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CNFe(CO)₂Cp)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (9).In an analogous reaction, 3a and [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃], in the presence of Me₃NO, are assembled to give the tetrameric species [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CN[Fe₂{μ- CN(Me)(R)}(μ-CO)(CO)(Cp)₂])}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Me, 10a; R = Xyl, 10b; R = 4-C₆H₄OMe, 10c).The molecular structures of 3a and 3b have been determined by X-ray diffraction studies.     

Complexes of tantalum with triaryloxides: Ligand and solvent effects on formation of hydride derivatives

A family of tantalum compounds supported by the triaryloxide [R-L]³⁻ ligands are reported [H₃(R-L) = 2,6-bis(4-methyl-6-R-salicyl)-4-tert-butylphenol, where R = Me or ^tBu]. The reaction of H₃[Me-L] with TaCl₅ in toluene gave [(Me-L)TaCl₂]₂ (1). The [^tBu-L] analogue [(^tBu-L)TaCl₂]₂ (2) was synthesized via treatment of TaCl₅ with Li₃[^tBu-L]. A THF solution of LiBHEt₃ was added to 1 in toluene to provide [(Me-L)TaCl(THF)]₂ (3), while treatment of 2 with 2 equiv of LiBHEt₃ or potassium in toluene followed by recrystallization from DME resulted in formation of [M(DME)₃][{(^tBu-L)TaCl}₂(μ-Cl)] [M = Li (4a), K (4b)]. When the amount of MBHEt₃ (M = Li, Na, K) was increased to 5 equiv, the analogous reactions in toluene afforded [{(bit-^tBu-L)Ta}₂(μ-H)₃M] [M = Li(THF)₂ (5a), Na(DME)₂ (5b), K(DME)₂ (5c)]. During the course of the reaction, the methylene CH activation of the ligand took place. Dissolution of 5a in DME produced [{(bit-^tBu-L)Ta}₂(μ-H)₃Li(DME)₂] (6), indicating that the coordinated THF molecules are labile. When the 2/LiBHEt₃ reaction was carried out in THF, the ring opening of THF occurred to yield [(^tBu-L)Ta(OBuⁿ)₂]₂ (7) along with a trace amount of [Li(THF)₄][{(^tBu-L)TaCl}₂(μ-OBuⁿ)] (8). Treatment of 2 with potassium hydride in DME yielded [{(^tBu-L)TaCl₂K(DME)₂}₂(μ-OCH₂CH₂O)] (9), in which the ethane-1,2-diolate ligand arose from partial C-O bond rupture of DME. The X-ray crystal structures of 2, 3, 4, 5a, 6, 7, and 9 are described.     

Synthesis and characterization of alkali-metal aryloxo compounds and their catalytic activity for l-lactide polymerization

Three new alkali-metal compounds stabilized by aryloxo groups were synthesized and fully characterized. The reactions of carbon-bridged bis(phenol)s MBMPH₂ (MBMPH₂ = 2,2′-methylene-bis(6-tert-butyl-4-methylphenol)) with sodium and potassium metals in tetrahydrofuran (THF) gave the desired alkali-metal complexes [MBMPNa₂(THF)₃]₂ (1) and [(MBMPK₂)₂(THF)₅]₂ (2), respectively, in high isolated yields. A similar reaction of aminophenol [HNOH] ([HNOH] = N-p-methyl-phenyl(2-hydroxy-3,5-di-tert-butyl)benzylamine) with sodium gave the monosodium salt [HNONa(THF)]₂ (3). Compounds 1-3 were well characterized, including X-ray structure determination. Compound 1 has a dimeric structure, and each sodium atom is four-coordinated with four oxygen atoms to form a distorted tetrahedron. Compound 2 has a centrosymmetric tetrameric structure. The coordination environments around the four potassium atoms are different. K1 is four-coordinated, K2 is three-coordinated, K3 is five-coordinated, whereas the coordination sphere of K4 is completed by one aryloxo oxygen atom and two oxygen atoms from two THF molecules and six carbon atoms from one arene ring of the bis(phenolate) ligand. Compound 3 has a dimeric structure, and each of the sodium atoms is four-coordinated to form a distorted tetrahedron. It was found that compounds 1-3 can efficiently initiate the ring opening polymerization of l-lactide in the absence of alcohol, yielding polymers with high molecular weights for a wide range of monomer-to-initiator ratios.     

Interaction of copper(II) and palladium(II) with linked 2,2′-dipyridylamine derivatives: Synthetic and structural studies

Interaction of copper(II) salts with 2,2′-dipyridylamine (1), N-cyclohexylmethyl-2,2′-dipyridylamine (2), di-2-pyridylaminomethylbenzene (3), 1,2-bis(di-2-pyridylaminomethyl)-benzene (4), 1,3-bis(di-2-pyridylaminomethyl)benzene (5), 1,4-bis(di-2-pyridylaminomethyl)benzene (6), 1,3,5-tris(di-2-pyridylaminomethyl)benzene (7) and 1,2,4,5-tetrakis(di-2-pyridylaminomethyl)benzene (8) has yielded the following complexes: [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · H₂O, [Cu₂(4)(NO₃)₄], [Cu₂(5)(NO₃)₄] · 2CH₃OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Cu₄(8)](NO₃)₄] · 4H₂O while complexation of palladium(II) with 1, 4, 5 and 6 gave [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)Cl₄], [Pd₂(4)(OAc)₄], [Pd₂(5)Cl₄], [Pd₂(6)Cl₄] and [Pd₂(6)(OAc)₄] · CH₂Cl₂, respectively. X-ray structures of [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · 2C₂H₅OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂ are reported. In part, the inherent flexibility of the respective ligands has resulted in the adoption of a diverse range of coordination geometries and lattice arrangements, with the structures of [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂, incorporating the isomeric ligands 4 and 6, showing some common features. Liquid–liquid (H₂O/CHCl₃) extraction experiments involving copper(II) and 1–3, 5, 7and 8 show that the degree of extraction depends markedly on the number of dpa-subunits (and concomitant lipophilicity) of the ligand employed with the tetrakis-dpa derivative 8 acting as the most efficient extractant of the six ligand systems investigated.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

A pyrazolyl-terminated 2,2′:6′,2″-terpyridine ligand: Iron(II), ruthenium(II) and palladium(II) complexes of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine

The preparation of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine (2) under acidic conditions results in the formation of the salts [H₂2][MeOSO₃]₂ and [H₂2][EtOSO₃]₂, treatment of which with base leads to neutral 2. The structure of [H₂2][EtOSO₃]₂ · H₂O has been established by single crystal X-ray diffraction. The complexes [Fe(2)₂][PF₆]₂ and [Ru(2)₂][PF₆]₂ have been prepared and characterized, and the single crystal structure determination of [Ru(2)₂][PF₆]₂ is reported; [Fe(2)₂][PF₆]₂ is isostructural with [Ru(2)₂][PF₆]₂. Treatment of [Fe(2)₂]²⁺ with PdCl₂ produces [Pd(2)Cl]⁺, isolated and structurally characterized as the hexafluoridophosphate salt, illustrating that metal exchange within the tpy-binding domain occurs in preference to palladium(II) coordination by the N-donor atom of the pendant 3,5-dimethylpyrazol-1-yl unit in 2. [Pd(2)Cl]²⁺ can also be prepared from PdCl₂ and [H₂2][MeOSO₃]₂ in refluxing methanol.     

Carbosiloxandendrimere mit terminalen SiH-Bindungen

An efficient method for the preparation of carbosiloxane dendrimers with end-grafted SiH-bonds is given by using the alcohols HOCH(Me)(CH₂)₄SiMe_3 − nH_n (4a: n = 1, 4b: n = 2, 4c: n = 3), which themselves are accessible by the hydrosilylation of MeCOCH₂CH₂CHCH₂ (1) with the chlorosilanes HSiMe_3 − nCl_n (2a: n = 1, 2b: n = 2, 2c: n = 3) and hydrogenation of the latter species with Li[AlH₄]. Alcohols 4a-4c can be used as starting materials for the preparation of carbosiloxane dendrimers of the 1^st-3^rd generation. For the synthesis of the 1^st generation dendrimers, Me_4 − mSiCl_m (5a: m = 1, 5b: m = 2, 5c: m = 3, 5d: m = 4) is reacted with 4a-4c in presence of NEt₃ as base. The dendritic molecules Me_4 − mSi[OCH(Me)(CH₂)₄SiMe_3 − nH_n]_m (n = 1: 6a, m = 1; 6b, m = 2; 6c, m = 3; 6d, m = 4. n = 2: 7a, m = 1; 7b,m = 2; 7c, m = 3; 7d, m = 4. n = 3: 8a, m = 3; 8b, m = 4) are thereby obtained in excellent yield. Carbosiloxane dendrimers of the 2^nd and 3^rd generation with a MeSiO₃- or SiO₄-core can be isolated from the reaction of MeSi(OCH₂CH₂CH₂SiMe₂Cl)₃ (9), MeSi(OCH₂CH₂CH₂SiMeCl₂)₃ (11), Si(OCH₂CH₂CH₂SiMe₂Cl)₄ (13) and MeSi(OCH₂CH₂CH₂SiMe(OCH₂CH₂CH₂SiMe₂Cl)₂)₃ (15) with 4a or 4b, respectively, under similar reaction conditions. Thereby MeSi[OCH₂CH₂CH₂SiMe₂OCH(Me)(CH₂)₄SiMe₂H]₃ (10), MeSi[OCH₂CH₂CH₂SiMe[OCH(Me)(CH₂)₄SiMe_3 − nH_n]₂]₃ (12a, n = 1; 12b, n = 2), Si[OCH₂CH₂CH₂SiMe[OCH(Me)(CH₂)₄SiMe₂H]₂]₄ (14) and MeSi[OCH₂CH₂CH₂SiMe[OCH₂CH₂CH₂SiMe₂OCH(Me)(CH₂)₄SiMe_3 − nH_n]₂]₃ (16) are formed as colourless oils.Compounds 3, 4, 6-8, 10, 12, 14 and 16 were characterised by elemental analysis as well as spectroscopic (IR, NMR) and mass spectrometric (ESI-TOF) studies.     

Structural diversity in the self-assembly of Ag(I) complexes containing 2-amino-5-halopyrimidine

A series of Ag(I) complexes containing the 2-amino-5-halopyrimidine ligands have been synthesized and their structures characterized by X-ray crystallography. The isomorphous complexes Ag(L-Cl)₂(CF₃SO₃) (L-Cl = 2-amino-5-chloropyrimidine), 1, and Ag(L-Br)₂(CF₃SO₃) (L-Br = 2-amino-5-bromopyrimidine), 2, are mononuclear, while [Ag(L-Br)(CF₃SO₃)]₆·6C₄H₁₀O, 3, and [Ag(L-I)(CF₃SO₃)]₆ (L-I = 2-amino-5-iodopyrimidine), 4, show cyclic self-assembly of six Ag(Ι) atoms and six L-X ligands, resulting in 24-membered metallocycles. The complex [Ag(L-I)(CF₃SO₃)]_∞, 5, forms 1D zigzag chains which are linked through C-I?Ag and Ag?O interactions to form a 3D structure. The tetranuclear complexes [Ag(L-X)(NO₃)]₄ [X = Cl, 6; Br, 7] form 16-membered metallocycles, while [Ag(L-X)(ClO₄)]_∞ [X = Cl, 8; Br, 9] exhibit helical chains. The different structure of 5 from 1 and 2 appears to be due to the stronger nucleophilic character of the iodine atom. In these complexes, the relatively smaller NO₃⁻ anions lead to the formation of tetranuclear metallocycles and the larger CF₃SO₃⁻ anions support the hexanuclear metallocycles, whereas the ClO₄⁻ anions induce the helical chains.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

Structural study on the organoantimony(III) NCN - Chelated compounds [2,6-(Me2NCH2)2C6H3]SbX2 - Influence of the polar group X

The reactions of organoantimony chloride LSbCl₂ (1) (L = [2,6-(Me₂NCH₂)₂C₆H₃]⁻) with the silver salts of selected carboxylic acids (1:2 molar ratio) resulted to the corresponding organoantimony carboxylates LSbX₂, where X = CH₃COO for (2); CF₃COO for (3). Similar reactions of 1 with the silver salt of the low nucleophilic anion (1:0.5 and 1:1 molar ratio) gave the ionic compounds [LSb(Cl)--Cl-Sb(Cl)L]⁺[CB₁₁H₁₂]⁻ (4), and [LSbCl]⁺[CB₁₁H₁₂]⁻ (5). All compounds were characterized by the help of the elemental analysis, ESI-MS, ¹H, ¹¹B, ¹³C NMR spectroscopy and IR spectroscopy. The solid state structure investigation using single crystal X-ray diffraction technique (3-5) revealed the presence of the strong Sb-N intramolecular dative connections in all cases and also significant differences in the shapes of the coordination polyhedra around the central antimony atoms was observed, i.e. a tetragonal pyramidal environment in 3 (CF₃COO groups are placed mutually in trans positions), an unusual chlorine bridged dinuclear cation consisting of one apex (Cl atom) sharing square pyramids in 4, and finally a vacant ψ-trigonal bipyramid around the central antimony atom in 5. Even more, crystallization of 5 from THF provided the single crystals of a THF aduct of 5 [LSbCl(THF)]⁺[CB₁₁H₁₂]⁻5a, where the central antimony atom is located in a tetragonal pyramidal environment. The solid state structures of 3-5 are retained in solution. Solution structure of the compound 2 was determined by the help of VT-¹H NMR spectroscopy and IR spectroscopy showing, that both carboxylates (CH₃COO) are unidentate and are placed mutually in cis positions in the coordination polyhedron around the central antimony atom. The whole coordination polyhedron in 2 might be best described as a biccaped - trigonal pyramid, due to the additional Sb-N intramolecular interactions.