Synthesis, characterization and olefin polymerization of the nickel catalysts supported by [N,S] ligands

The novel nickel (II) complexes (2a, 2b) bearing 1-pyridyl-(3-substituedimidazole-2-thione) ligands were synthesized by the reaction of the corresponding ligands with NiBr₂(DME). 2a and 2b have been characterized by IR, NMR and elemental analysis. The nickel complexes show high catalytic activities for norbornene polymerization in the presence of MAO (methylaluminoxane), although low activities for ethylene polymerization.     

Styrene polymerization using nickel(II) complexes as catalysts

Styrene polymerization is investigated with neutral and cationic Ni(II) complexes, i.e. Ni(bipy)Me₂, 1, Ni(bipy)Br₂, 2, Ni(phen)Br₂, 3, or Ni(Me₂phen)Br₂, 4, Ni(acac)₂, 5, (bipy = 2,2′-bipyridine, phen = phenanthroline, Me₂phen = 2,9-dimethyl-1,10-phenanthroline, acac = acetylacetonate), activated by [NHMe₂Ph][B(C₆F₅)₄] or B(C₆F₅)₃ as cocatalysts, in the presence of AlMe₃. The influence on the polystyrene features and the reaction kinetics of the nickel complex and boron activator, the Al/Ni or B/Ni molar ratios as well as the monomer concentration are studied. Catalytic systems derived from 2, 3 or 5 and [NHMe₂Ph][B(C₆F₅)₄] at a Ni:B:Al ratio of 1:1:5 are the most efficient at room temperature.     

Tuning of nickel 2-phosphinophenolates - catalysts for oligomerization and polymerization of ethylene

This short personal account summarizes recent work concerning the syntheses and structural aspects of neutral and cationic (organo)nickel and (organo)palladium 2-phosphinophenol(ate) complexes and catalysts for the oligo- or polymerization of ethylene.     

(Diisopropylamido) bis (methylcyclopentadienyl) lanthanides as single-component initiators for polymerization of methyl methacrylate

It was first found that (diisopropylamido)bis(methylcyclopentadienyl)lanthanides (MeC₅H₄)₂LnN(i-Pr)₂(THF) (Ln = Yb ( 1 ), Er ( 2 ), Y ( 3 )) exhibit extremely high catalytic activity in the polymerization of methyl methacrylate. The reactions can be carried out over a quite broad range of polymerization temperatures from -78 to 40°C. The catalytic activity of the complexes increases with an increase of ionic radii of the metal elements, i.e. Y > Er > Yb. The results of GPC (gel permeation chromatography) indicate that the number-average molecular weights (M_n) of polymers obtained exceed 100 × 10³ and the molecular weight distribution (M_w/M_n) becomes broad with the increase of temperature. Furthermore highly syndiotactic PMMA (87.7%) can be obtained by lowering the reaction temperature to −78°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1593–1597, 1998     

A neutral Ni(II) acetylide-mediated radical polymerization of methyl methacrylate using the atom transfer radical polymerization method

A neutral nickel σ-acetylide complex [Ni(CCPh)₂(PBu₃)₂] (NBP) is used for possible atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in conjunction with an organic halide as an initiator [R-X: CCl₄, CH₃Cl, BrCCl₃, C₂H₅Br, and C₅H₉Br] in toluene at 80 °C. Among these initiating systems, BrCCl₃/NBP gave the best controlled radical polymerization of MMA and produced polymer with relatively narrow molecular weight distribution (M_w/M_n≈1.3). The ATRP of MMA is preliminarily identified by the following facts: (1) the present MMA polymerization initiated by BrCCl₃/NBP is completely hindered by the addition of TEMPO; (2) the conversion shows a typical linear variation with time in semilogarithmic coordinates; (3) the measured number-average molecular weights of polymer show a linear increase with conversion and agree closely with the theoretical values; (4) the resulting polymer chain contains a dormant carbon-halogen terminal.     

The mechanism of ethylene polymerization by nickel salicylaldiminato catalysts - Agostic interactions and their kinetic isotope effects

The ethylene polymerization reaction of a neutral nickel catalyst was studied by DFT calculations at the Becke3LYP/6-31G(d) level of theory. As in related cases a β-agostic bond stabilizes the nickel alkyl ground states. Transition states for the insertion of the olefin show a distinct α-agostic interaction, which has not been observed for late metal polymerization catalysts before. An ethylene-alkyl complex was identified as the resting state of the reaction. The overall barrier height of the reaction amounts to 17.54 kcal/mol, which slightly increases to 17.60 kcal/mol for the polymerization of deuterated ethylene. Therefore, a small positive kinetic isotope effect (k_H/k_D = 1.09) can be calculated, which is caused by the α-agostic interaction in the transition state. A comparison to other late metal based polymerization systems reveals that the ethylene coordination step of highly active catalysts is significantly lower in energy compared to catalysts which are only moderately active.     

配合物[2-NaPhthMePyNH_2]_2[Ni(mnt)_2]的合成及表征

合成了马来二氰基二硫烯镍(Ⅱ)配合物,[2-Na Phth Me Py NH2]2[Ni(mnt)2]([2-Na Phth Me Py NH2]+为1-(2'-萘苄基)-2-氨基吡啶鎓离子),并用元素分析,UV,IR,单晶X-射线衍射表征了其组成和结构。结果表明,配合物系单斜晶系,空间群P21/c,a=13.335(2),b=7.9458(12),c=17.480(3),α=90°,β=97.646(2)°,γ=90°,V=1835.7(5),Z=2。     

Synthesis and spectroscopic characterization of bis(N-alkyldithiocarbamato)nickel(II) complexes: crystal structures of [Ni(S2CNH(n-Pr))2] and [Ni(S2CNH(i-Pr))2]

Bis(N-alkyldithiocarbamato)nickel(II) complexes (1–5) [Ni(S₂CNHR)₂] (where R?=?Me, Et, n-Pr, i-Pr, n-Bu) were synthesized by the reaction of NiCl₂?·?6H₂O and the corresponding sodium salt of N-alkyldithiocarbamate in 1?:?2 molar ratio in aqueous medium. These bis(N-alkyldithiocarbamato)nickel(II) complexes (1–5) were characterized by elemental analysis, UV-Visible, IR, and ¹H/¹³C-NMR spectroscopy. The crystallographic investigation of [Ni(S₂CNH(n-Pr))₂] (3) and [Ni(S₂CNH(i-Pr))₂] (4) revealed distorted square-planar geometry around nickel(II). The dithiocarbamates have anisobidentate coordination with nickel and the dithiocarbamates are trans.     

Acetamidine complexes as catalysts for ethylene polymerization

The reaction of (2,6-diisopropyl-phenyl)-acetimidoyl chloride or (2,6-dimethyl-phenyl)-acetimidoyl chloride with 2,6-dimethylaniline in the presence of triethylamine yields a mixture of isomers N′-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N-(2,6-dimethyl)-acetamidine (1a) and N-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N′-(2,6-dimethyl)-acetamidine (1b), and N,N′-bis-(2,6-dimethyl-phenyl)-N-[1-(2,6-dimethyl-phenylimino)ethyl)]-acetamidine (2), respectively. The addition of isomers (1a + 1b) to nickel (II) dibromide 2-methoxyethyl ether, (NiBr₂[O(C₂H₄OMe)₂]) gives a mixture of new nickel complexes, [NiBr₂{N′-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N-(2,6-dimethyl)-acetamidine}] (3a) and [NiBr₂{N-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N′-(2,6-dimethyl)-acetamidine}] (3b). Similarly, ligand 2 reacts with nickel (II) dibromide 2-methoxyethyl ether to afford the complex [NiBr₂{N,N´-bis-(2,6-dimethyl-phenyl)-N-[1-(2,6-dimethyl-phenylimino)ethyl)]-acetamidine}] (4). The structures of the ligands and nickel complexes have been determined by single crystal X-ray diffraction.The addition of MAO to these complexes generates catalytically active species for the homopolymerization of ethylene. The polymer products are high molecular weight (80-169 K). At temperatures of up to 60 °C both catalysts are a single site giving a monomodal molecular weight distribution. However, at 70 °C the mixture (3a + 3b) shows a bimodal molecular weight distribution.     

Umsetzung von C(NMe2)4 mit Ni(CO)4 – Synthesen und Strukturen von [C(NMe2)3][(CO)3NiC(O)NMe2], [C(NMe2)3]2[Ni5(CO)12] und [C(NMe2)3]3[Ni6(CO)12][O2CNMe2]

Reaction of C(NMe₂)₄ with Ni(CO)₄ – Syntheses and Structures of [C(NMe₂)₃][(CO)₃NiC(O)NMe₂], [C(NMe₂)₃]₂[Ni₅(CO)₁₂], and [C(NMe₂)₃]₃[Ni₆(CO)₁₂][O₂CNMe₂] The reaction of C(NMe₂)₄ with Ni(CO)₄ in THF produces the carbamoyl complex [C(NMe₂)₃][(CO)₃NiC(O)NMe₂] ( 1 ); side products are the purple cluster compound [C(NMe₂)₃]₂[Ni₅(CO)₁₂] · THF ( 2 · THF) and the red cocristallization product [C(NMe₂)₃]₃[Ni₆(CO)₁₂][O₂CNMe₂] ( 3 ). All compounds were studied by X‐ray diffraction analyses. The cations of 3 are all disordered but not those of 1 and 2 . The unit cell of 1 contains two crystallographically independent anions (I and II) which differ in the dihedral angle between the plane of the carbamoyl ligand and the plane defined by the atoms C_Carbamoyl–Ni–CO amounting 0° in the anion I and 18° in the anion II.     

Synthesis of indenyllanthanide amides:the effective initiators for polymerization of methyl methacrylate

Diisopropylamido bisindenyl lanthanides(C9H7)2LnN(i-Pr)2(Ln=Gd(1),Y(2),Er(3))were successfully synthesized in satisfied yield by the reaction of Ln(N(i-Pr)2)3(THF)with indene in 1:2 molar ratio in toluene.All of the complexes exhibit very high catalytic activity in the polymerization of methyl methacrylate.The resulting polymers have narrow molecular weight distributions and high syndiotacticity.     

Synthesis, crystal structure of bis(arylamido)lanthanide methyl complexes and their catalytic behavior for the polymerization of methyl methacrylate

Reactions of [N(C₆H₃i-Pr₂-2,6)(SiMe₃)]₂LnCl(THF) (Ln=Nd, Yb) with two equivalents of MeLi in a mixture solution of toluene and Et₂O gave [N(C₆H₃i-Pr₂-2,6)(SiMe₃)]₂LnCH₃(μ-CH₃)Li(THF)₃·PhCH₃ (Ln=Nd (1), Yb (2)) in good isolated yields as crystalline solids. The single-crystal structural analysis of 2 revealed that the coordination geometry of ytterbium ion is best described as a distorted pseudo-tetrahedron. Both 1 and 2 are active for the polymerization of methyl methacrylate to give syndiotactic-rich and high molecular weight polymers (M_n>10⁴) with relatively narrow molecular weight distributions (M_w/M_n<2).     

Synthesis and characterization of new bis(1-aryliminomethylenylnaphthalen-2-oxy)nickel complexes and their catalytic behavior for vinyl polymerization of norbornene

The synthesized 1-aryliminomethylenylnaphthalen-2-ol derivatives reacted with nickel chloride to form bis(1-aryliminomethylenylnaphthalen-2-oxy)nickel complexes. All resultant compounds were structurally characterized by elemental analyses, IR and H NMR, and the structures of the formed complexes were elucidated by X-ray crystal structure analysis. The complexes show high catalytic activities for the vinyl polymerization of norbornene in the presence of methylaluminoxane. The catalytic activity variations have been followed by gas chromatography through monitoring the conversion of norbornene.     

Living radical polymerization of methyl methacrylate with a zerovalent nickel complex,Ni(PPh3)

A zerovalent nickel complex, Ni(PPh₃)₄, induced living radical polymerization of methyl methacrylate (MMA) in conjunction with an organic bromide as an initiator [R–Br: CCl₃Br, (CH₃)₂C(CO₂Et)Br, (CH₃)₂C(COPh)Br] in the presence of Al(Oi-Pr)₃ additive. The molecular weight distributions were narrow (M̄_w/M̄_n ∼ 1.2) throughout the reactions, and the number-average molecular weights (M̄_n) increased in direct proportion to monomer conversion. In contrast, the polymers obtained with CCl₄ in place of R–Br had broader MWDs (M̄_w/M̄_n > 2). The Al(Oi-Pr)₃ additive should be added for the smooth polymerizations of MMA to occur, similarly to those with a divalent nickel bromide, NiBr₂(PPh₃)₂. The Ni(PPh₃)₄-mediated living polymerization apparently proceeds via the activation of the C Br bond from the initiators R Br, assisted by the redox reaction of the complex between Ni(0) and Ni(I) species. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3003–3009, 1999     

A [4+2]-like cycloaddition of methyl methacrylate on Si(100)-2 x 1

The attachment of methyl methacrylate (MMA) on Si(100)-2x1 was investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and density functional theory (DFT) calculations. The HREELS spectra of chemisorbed MMA show the disappearance of characteristic vibrations of C=O (1725 cm(-1)) and C(sp(2))-H (3110, 1400, and 962 cm(-1)) coupled with the blue shift of the C=C stretching mode by 34 cm(-1) compared to those of physisorbed molecules. These results clearly demonstrate that both C=C and C=O in MMA directly participate in the interaction with the surface to form a SiCH(2)C(CH(3))=C(OCH(3))OSi species via a [4+2]-like cycloaddition. This binding configuration was further supported by XPS, UPS, and DFT studies.     

Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.     

Supported nickel bromide catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate

A new supported catalytic system, i.e. nickel bromide catalyst ligated by triphenylphosphine (TPP) ligands immobilized onto crosslinked polystyrene resins (PS-TPP) is reported. Per se, this catalyst does not allow any control over the polymerization of methyl methacrylate (MMA) initiated by ethyl 2-bromoisobutyrate but, in the presence of a given amount of purposely added free TPP, it promotes controlled ATRP of MMA. Indeed colorless PMMA chains of low polydispersity indices are readily recovered, the molecular weight of which linearly increases with monomer conversion and agrees with the expected values. Recycling of the supported catalyst is evidenced and does not prevent the polymerization from being controlled.     

N-tripodal ligands to generate copper catalysts for the syndiotactic polymerization of methyl-methacrylate: Crystal structures of copper complexes

A library of N-tripodal ligands, based on a central nitrogen atom connected to three different functionalized arms, was investigated via a parallel approach for the polymerization of methyl-methacrylate (MMA) in presence of late transition metal salts. Copper salts CuCl₂ and Cu(OAc)₂ in combination with N-(2-furanylmethyl)-N-(1-3,5-dimethyl-1H-pyrazolylmethyl)-N- (phenylmethyl)amine were detected as efficient catalysts for the syndiotactic polymerization of MMA ([rr] up to 78%). Kinetic studies and X-ray structures of the best catalysts were reported.     

配合物[1-(4′-bromo-2′-fluorobenzyl)pyridinium]2[Ni(mnt)2]和[1-(4′-bromo-2′-fluorobenzyl)pyrazinium]2[Ni(mnt)2](mnt2-=maleonitriledithiolate dianion)的合成及晶体结构

本文报道两个含双(马来二氰基二硫烯)镍(Ⅱ)配合物阴离子的离子对化合物。对阳离子为1-(4′-溴-2′-氟苄基)吡啶 盐时,生成配合物1。晶体数据:三斜晶系,空间P1群,a=0.7086(2)nm,b=1.0968(3)nm,c=1.1775(3)nm,α=69.914(5)°,β=89.495(5)°,γ=74.765(5)°,V=0.8259(4)nm³,Z=1。对阳离子为1-(4′-溴-2′-氟苄基)吡嗪鎓盐时,生成配合物2。晶体数据:单斜晶系,空间群P2₁/n,a=0.71554(17)nm,b=1.4262(3)nm,c=1.6725(4)nm,β=100.396(4)°,V=1.6788(7)nm³,Z=4。两个配合物中,阴离子为拟平面结构,镍原子均位于对称中心。变换对阳离子上的芳环种类对晶体的堆积结构产生影响。     

Preparation, structure and ethylene polymerization behavior of mixed-halide nickel(II) complexes and cobalt(II) complex containing imidazolium

Preparation of two imidazolium salts, two monomeric nickel(II) and one cobalt(II) complexes bearing imidazolium ligands is described, The solid-state structures of these compounds have determined by single-crystal X-ray diffraction. After activation with methylaluminoxane (MAO) the nickel complexes show moderate catalytic activities of up to 6 × 10⁵ g PE mol⁻¹Ni h⁻¹ for polymerization of ethylene. Catalytic activities, molecular weights have been investigated under the various reaction conditions.