Miscibility of Halogen-containing Polymethacrylates with Various Poly(alkyl acrylate)s

The miscibility behavior of a series of halogen-containing polymethacrylates with poly(methyl acrylate), poly(ethyl acrylate), poly(n-propyl acrylate) and poly(n-butyl acrylate) was investigated by differential scanning calorimetry and for lower critical solution temperature (LCST) behavior. Poly(chloromethyl methacrylate), poly(1-chloroethyl methacrylate), poly(2-chloroethyl methacrylate), poly(2,2-dichloroethyl methacrylate), poly(2,2,2-trichloroethyl methacrylate), poly(2-fluoroethyl methacrylate) and poly(1,3-difluoroisopropyl methacrylate) are miscible with some of the poly(alkyl acrylate)s. Most of the miscible blends show LCST behavior. However, poly(3-choloropropyl methacrylate), poly(3-fluoropropyl methacrylate), poly(4-fluorobutyl methacrylate), poly(1,1,1,3,3,3-hexafluoroisopropyl methacrylate), poly(2-bromoethyl methacrylate) and poly(2-iodoethyl methacrylate) are immiscible with any of the poly(alkyl acrylate)s studied. © 1997 John Wiley & Sons, Ltd.     

Thermal degradation of phenyl methacrylate-methyl methacrylate copolymers

The degradation behaviours of poly(phenyl methacrylate), four phenyl methacrylate-methyl methacrylate copolymers which span the composition range, and poly(methyl methacrylate) have been compared by using thermogravimetry in dynamic nitrogen and thermal volatilisation analysis (TVA) under vacuum, with programmed heating at 10°C/min. Volatile products have been separated by subambient TVA and identified and the cold ring fraction and partially degraded polymer have been examined by ir spectroscopy. Poly(phenyl methacrylate) resembles poly(methyl methacrylate) in degrading completely to monomer. Copolymers of phenyl methacrylate and methyl methacrylate are more stable than the homopolymers. On degradation, the major products are the two monomers. Minor products from all the copolymers include carbon dioxide, dimethylketene, isobutene and formaldehyde. Copolymers with low and moderate phenyl methacrylate contents show the formation of anhydride ring structures in the cold ring fraction and partially degraded copolymer, together with small amounts of methanol in the volatile products. Carbon dioxide is a more significant product at lower phenyl methacrylate contents.The mechanism of degradation is discussed.     

Synthesis of graft copolyimides via controlled radical polymerization of methacrylates with a polyimide macroinitiator

The atom-transfer radical polymerization of methyl methacrylate and tert-butyl methacrylate with a polyimide multicenter macroinitiator in the presence of a CuCl-2,2′-bipyridine catalytic system is investigated. The kinetic features of the process, the molecular-weight characteristics of the formed side chains, and the post-polymerization of methyl methacrylate with graft polyimides containing polymethacrylate side chains are studied. The conditions of controlled polymerization yielding graft copolyimides with narrowly dispersed living poly(methyl methacrylate) or poly(tert-butyl methacrylate) side chains of variable lengths are determined.     

Controlled radical polymerization of methacrylates of various structures in the presence of the AIBN-FeCl3-N,N-dimethylformamide catalytic system

The controlled radical polymerization of methyl methacrylate, 2-ethoxyethyl methacrylate, and tert-butyl methacrylate conducted via atom-transfer radical polymerization in the presence of the AIBN-FeCl₃· 6H₂O-N,N-dimethylformamide catalytic system is studied. For all the systems under study, the rate of reaction is first order with respect to the monomer concentration. The number-average molecular mass of the polymers linearly increases with conversion, and their polydispersity indexes are below 1.6. The rate of polymerization decreases in the following sequence: 2-ethoxyethyl methacrylate > methyl methacrylate > tert-butyl methacrylate. The presence of ω-terminal chlorine atoms in polymer macromolecules is confirmed by ¹H NMR spectroscopy and through the block copolymerization of methyl methacrylate with a poly(ethoxyethyl methacrylate)-based macroinitiator.     

Enzymatic synthesis of sorbitan methacrylate according to acyl donors

Recently, sugar polymers have been considered for use as biomaterials in medical applications. These biomaterials are already used extensively in burn dressings, artificial membranes, and contact lenses. In this study, we investigated the optimum conditions under which the enzymatic synthesis of sorbitan methacrylate can be affected using Novozym 435 in t-butanol from sorbitan and several acyl donors (ethyl methacrylate, methyl methacrylate, and vinyl methacrylate). The enzymatic synthesis of sorbitan methacrylate, catalyzed by Novozym 435 in t-butanol, reached an approx 68% conversion yield at 50 g/L of 1,4-sorbitan, 5% (w/v) of enzyme content, and a 1∶5 molar ratio of sorbitan to ethyl methacrylate, with a reaction time of 36 h. Using methyl methacrylate as the acyl donor, we achieved a conversion yield of approx 78% at 50 g/L of 1,4-sorbitan, 7% (w/v) of enzyme content, at a 1∶5 molar ratio, with a reaction time of 36 h. Sorbitan methacrylate synthesis using vinyl methacrylate as the acyl donor was expected to result in a superior conversion yield at 3% (w/v) of enzyme content, and at a molar ratio greater than 1∶2.5. Higher molar ratios of acyl donor resulted in more rapid conversion rates. Vinyl methacrylate can be applied to obtain higher yields than are realized when using ethyl methacrylate or methyl methacrylate as acyl donors in esterification reactions catalyzed by Novozym 435 in organic solvents. Enzyme recycling resulted in a drastic reduction in conversion yields.     

Phase behavior of tetramethylpolycarbonate blends with styrene‐based methacrylate copolymers and their interaction energies

The miscibility of tetramethylpolycarbonate (TMPC) blends with styrenic copolymers containing various methacrylates was examined, and the interaction energies between TMPC and methacrylate were evaluated from the phase‐separation temperatures of TMPC/copolymer blends with lattice‐fluid theory combined with a binary interaction model. TMPC formed miscible blends with styrenic copolymers containing less than a certain amount of methacrylate, and these miscible blends always exhibited lower critical solution temperature (LCST)‐type phase behavior. The phase‐separation temperatures of TMPC blends with copolymers such as poly(styrene‐co‐methyl methacrylate), poly(styrene‐co‐ethyl methacrylate), poly(styrene‐co‐n‐propyl methacrylate), and poly(styrene‐co‐phenyl methacrylate) increase with methacrylate content, go through a maximum, and decrease, whereas those of TMPC blends with poly(styrene‐co‐n‐butyl methacrylate) and poly(styrene‐co‐cyclohexyl methacrylate) always decrease. The calculated interaction energy for a copolymer–TMPC pair is negative and increases with the methacrylate content in the copolymer. This would seem to contradict the prediction of the binary interaction model, that systems with more favorable energetic interactions have higher LCSTs. A detailed inspection of lattice‐fluid theory was performed to explain such phase behavior. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1288–1297, 2002     

Surface molecularly imprinted magnetic microspheres for the recognition of albumin

A new approach, combining metal coordination with the molecular imprinting technique, was developed to prepare affinity materials. Magnetic poly(glycidyl methacrylate) microspheres in monosize form were used for specific recognition toward the target protein. The magnetic poly(glycidyl methacrylate) microspheres were prepared by dispersion polymerization in the presence of magnetite nanopowder. Surface imprinted magnetic poly(glycidyl methacrylate) microspheres based on metal coordination were prepared and used for the selective recognition of human serum albumin. Iminodiacetic acid was used as the metal coordinating agent and human serum albumin was anchored by Cu²⁺ ions on the surface of magnetic poly(glycidyl methacrylate) microspheres by metal coordination. The magnetic poly(glycidyl methacrylate) microspheres were coated with a polymer formed by condensation of tetraethyl orthosilicate and 3‐aminopropyltrimethoxysilane. The human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres were characterized by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy and particle size analysis. The maximum adsorption capacity of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres was 37.7 mg/g polymer at pH 6.0. The selectivity experiments of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres prepared with different concentrations in the presence of lysozyme, bovine serum albumin and cytochrome C were performed in order to determine the relative selectivity coefficients.     

Synthesis of monodisperse submicron spherical poly(methylmethacrylate) particles and the molecular dynamics simulation

The molecular-dynamics method has been used to determine the conformational states of poly(methyl methacrylate) chains in a medium composed of water and a monomer (methyl methacrylate). Experimentally detected spherical particles resulting from polymerization have been found to take the form of droplet-type aggregates containing several chains, with the water and monomer concentrations in the aggregates differing from those in the dispersion medium. It has been shown that the methyl methacrylate concentration in an initial reaction mixture of about 20% is optimal for the formation of spherical droplet-type aggregates. It has been experimentally established that spherical poly(methyl methacrylate) particles with a narrow size distribution are formed at a methyl methacrylate concentration of ≈23%.     

The Relationship of Reaction Temperature,Tg and Rich‐Syndiotacticity of Poly(alkyl methacrylate)s in Modified Microemulsion Polymerization

Nanoscale poly(alkyl methacrylate)s including poly(methyl methacrylate), poly(ethyl methacrylate), poly(cyclohexyl methacrylate), poly(iso‐butyl methacrylate) and poly(benzyl methacrylate) were prepared by a modified microemulsion polymerization procedure. NMR analysis suggested that these poly(methacrylate)s samples were higher in syndiotactic content, lower in isotactic content and the glass transition temperatures (T_gs) of them were also higher than those reported in the literature. The tacticities of the poly(methacrylate)s, beside the restricted volume effect of nanoparticles during the modified microemulsion polymerization, were mainly influenced by the reaction temperature, the lower the reaction temperature, the higher the syndiotacticity of the products. The syndiotacticity of the product decreased obviously when the polymerization was carried out at a temperature far above the T_g of the resulting polymer. It was also shown that the tacticity of the polymer was affected by the monomer structure, a monomer with the bulkier alkyl side group would liable to result in a polymer with richer syndiotacticity. Possible mechanism of rich‐syndiotacticity was also discussed.     

Block copolymer mediated synthesis of amphiphilic gold nanoparticles in water and an aqueous tetrahydrofuran medium: An approach for the preparation of polymer–gold nanocomposites

The synthesis of polymer‐matrix‐compatible amphiphilic gold (Au) nanoparticles with well‐defined triblock polymer poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] and diblock polymers poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], polystyrene‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], and poly(t‐butyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] in water and in aqueous tetrahydrofuran (tetrahydrofuran/H₂O = 20:1 v/v) at room temperature is reported. All these amphiphilic block copolymers were synthesized with atom transfer radical polymerization. The variations of the position of the plasmon resonance band and the core diameter of such block copolymer functionalized Au particles with the variation of the surface functionality, solvent, and molecular weight of the hydrophobic and hydrophilic parts of the block copolymers were systematically studied. Different types of polymer–Au nanocomposite films [poly(methyl methacrylate)–Au, poly(t‐butyl methacrylate)–Au, polystyrene–Au, poly(vinyl alcohol)–Au, and poly(vinyl pyrrolidone)–Au] were prepared through the blending of appropriate functionalized Au nanoparticles with the respective polymer matrices {e.g., blending poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate‐stabilized Au with the poly(methyl methacrylate)matrix only}. The compatibility of specific block copolymer modified Au nanoparticles with a specific homopolymer matrix was determined by a combination of ultraviolet–visible spectroscopy, transmission electron microscopy, and differential scanning calorimetry analyses. The facile formation of polymer–Au nanocomposites with a specific block copolymer stabilized Au particle was attributed to the good compatibility of block copolymer coated Au particles with a specific polymer matrix. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1841–1854, 2006     

Cyclodextrins in polymer synthesis: free radical polymerisation of cyclodextrin complexes of cyclohexyl and phenyl methacrylate in aqueous medium

The polymerisation mechanism of 2,6-dimethyl-β-cyclodextrin (Me₂-β-CD) complexes of phenyl methacrylate ( 1 ) and cyclohexyl methacrylate ( 2 ) is described. The polymerisation of the complexes 1 a and 2a was carried out in water with potassium peroxodisulfate/potassium hydrogensulfite as initiator. The unthreading of the Me₂-β-CD during the polymerisation led to water-insoluble poly(phenyl methacrylate) ( 1b ) and poly(cyclohexyl methacrylate) ( 2b ). By comparison, analogously prepared polymers from uncomplexed monomers 1 and 2 in homogeneous organic solvent (THF) with AIBN as radical initiator showed significantly lower viscosities and were obtained in lower yields in both cases.     

Synthesis of polysulfohexyl methacrylate with anticoagulant activity

Sulfohexyl methacrylate and its polymer have been prepared. The anticoagulation activity of this polymer and copolymers with hydroxyethyl methacrylate and acrylamide was compared with that of polyhydroxyethyl methacrylate, polysulfoethyl methacrylate, and heparin. The activated-carbon microcapsule coated with polysulfohexyl methacrylate showed itself a promising adsorbent.     

Synthesis of Graft Polymers by Copolymerization of Macromonomers. II. Copolymerization Kinetics of Styrene-and Methacrylate-Terminatedpoly(2-Acetoxyethyl Methacrylate) Macromonomers

Styrene-terminated poly(2-acetoxyethyl methacrylate) macromonomer (EBA), methacrylate-terminated poly(2-acetoxyethyl methacrylate) macromonomer (MPA), and methacrylate-terminated poly(methyl methacrylate) macromonomer (MPM) were synthesized and subjected to polymerization and copolymerization by a free-radical polymerization initiator (AIBN). EBA and MPA were homopolymerized at various concentrations. EBA exhibited higher reactivity than styrene. The reactivity of MPA, however, was almost equal to that of glycidyl methacrylate. Cumulative copolymer compositions were determined by GPC analysis of copolymerization products. The reactivity ratios estimated were r_a = 0.95 and r_b , = 0.90 for EBA macromonomer (a)-methyl methacrylate (b) copolymerization. These values were not consistent with literature values for the styrene-methyl methacrylate and p-methoxy-styrene-methyl methacrylate systems. The reactivity ratios estimated for MPA and 2-bromoethyl methacrylate were r_a - 0.95 and r_b , = 0.98; equal to the glycidyl methacrylate-2-bromoethyl methacrylate system. MPA or MPM was also copolymerized with styrene, and the reactivity ratios were r_a = 0.40, r_a = 0.60 and r_a = 0.39, r_a = 0.58, respectively. These estimates were in good agreement with the reactivity ratios for glycidyl methacrylate and styrene. Thus, no effect of molecular weight was observed for both copolymerization systems.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

The importance of proper anchoring of an amphiphilic dispersant for colloidal stability

Highly stable poly(methyl methacrylate) (PMMA) based microcapsule suspensions without excess dispersant are obtained via the solvent evaporation route using poly(methyl methacrylate)-block-poly(sodium methacrylate) or poly(methyl methacrylate)-block-poly(sodium acrylate) diblock copolymers as dispersant. The stable suspension is characterized by a high ζ-potential that does not change with time or after washing steps. It is indirectly proven on model PMMA surfaces using quartz crystal microbalance with dissipation monitoring that the PMMA block of the copolymer is embedded in the underlying PMMA microcapsule. Such anchoring of the dispersant is key for the good colloidal stability.     

In situ Fourier transform near infrared spectroscopy monitoring of copper mediated living radical polymerization

In situ Fourier transform near infrared (FTNIR) spectroscopy was successfully used to monitor monomer conversion during copper mediated living radical polymerization with N‐(n‐propyl)‐2‐pyridylmethanimine as a ligand. The conversion of vinyl protons in methacrylic monomers (methyl methacrylate, butyl methacrylate, and N‐hydroxysuccinimide methacrylate) to methylene protons in the polymer was monitored with an inert fiber‐optic probe. The monitoring of a poly(butyl methacrylate‐b‐methyl methacrylate‐b‐butyl methacrylate) triblock copolymer has also been reported with difunctional poly(methyl methacrylate) as a macroinitiator. In all cases FTNIR results correlated excellently with those obtained by ¹H NMR. On‐line near infrared (NIR) measurement was found to be more accurate because it provided many more data points and avoided sampling during the polymerization reaction. It also allowed the determination of kinetic parameters with, for example, the calculation of an apparent first‐order rate constant. All the results suggest that FTNIR spectroscopy is a valuable tool to assess kinetic data. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4933–4940, 2004     

Miscibility windows for poly(styrene-co-vinyl phenol) blends with poly(alkyl methacrylate)s: Further comparisons of theoretical predictions to FTIR experimental data

We report the results of theoretical and experimental studies of styrene-co-vinyl phenol (STVPh) copolymer blends with poly(n-octyl methacrylate) (POMA) and poly(n-decyl methacrylate) (PDMA). This work is a natural extension to our recently reported studies of the phase behavior of analogous STVPh blends with poly(n-butyl methacrylate) (PBMA) and poly(n-hexyl methacrylate) (PHMA) where we employed an association model together with parameters obtained from studies of miscible homopolymer blends. The theoretically calculated miscibility maps for STVPh copolymer blends with the homologous series of poly(n-alkyl methacrylates) (PAMA) are in fine agreement with experiment.     

Synthesis of aromatic dicarboxyl-terminated poly(methyl methacrylate) macromonomers

Hydroxyl- or amino-terminated prepolymers were prepared by radical polymerization of methyl methacrylate in the presence of 2-mercaptoethanol or 2-aminoethanethiol hydrochloride, respectively, as a chain transfer agent. The resulting prepolymers were subjected to react with trimellitic anhydride to form aromatic dicarboxyl-terminated poly(methyl methacrylate)s. These condensation-type macromonomers and terephthalic acid were condensed with bisphenol-A to produce polyester–poly(methyl methacrylate) graft copolymers.     

Silica nanoparticle covered with mixed polymer brushes as Janus particles at water/oil interface

Silica nanoparticles (NSiO₂) are modified with mixed polymer brushes derived from a block copolymer precursor, poly(methyl methacrylate)-b-poly(glycidyl methacrylate)-b-poly(tert-butyl methacrylate) with short middle segment of PGMA, through one step ??grafting-onto?? approach. The block polymer precursors are prepared via reversible addition?Cfragmentation chain transfer-based polymerization of methyl methacrylate, glycidyl methacrylate, and tert-butyl methacrylate. The grafting is achieved by the reaction of epoxy group in short PGMA segment with silanol functionality of silica. After hydrolysis of poly(tert-butyl methacrylate) segment, amphiphilic NSiO₂ with ??V-shaped?? polymer brushes possessing exact 1:1 molar ratio of different arms were prepared. The functionalized particles self-assemble at oil/water interfaces to form stable large droplets with average diameter ranging from 0.15?±?0.06 to 2.6?±?0.75?mm. The amphiphilicity of the particles can be finely tuned by changing the relative lengths of poly(methyl methacrylate) and poly(methacrylic acid) segments, resulting in different assembly behavior. The method may serve as a general way to control the surface property of the particles.     

BAB‐random‐C Monomer Sequence via Radical Terpolymerization of Limonene (A), Maleimide (B), and Methacrylate (C): Terpene Polymers with Randomly Distributed Periodic Sequences

A naturally abundant terpene, limonene (A), was radically polymerized with a maleimide derivative (B) and methacrylate (C) in a fluorinated alcohol to give terpolymers with unprecedented BAB‐random‐C sequences in which the BAB monomer sequence was randomly copolymerized with a C unit. In each binary system, limonene was hardly copolymerized with methacrylate while it was efficiently copolymerized with maleimide to result in a 1:2‐alternating BAB periodic sequence, in part due to the penultimate effects and hydrogen‐bonding interactions with fluoroalcohol. Methacrylate and maleimide were randomly copolymerized to give copolymers rich in methacrylate units with minimal amounts of maleimide–maleimide sequences. Their terpolymerization resulted in a BAB‐r‐C sequence as a consequence of the selective BAB polymerization between limonene and maleimide, the random copolymerization between methacrylate and maleimide, and the lack of copolymerization between limonene and methacrylate.