Bio-field-effect transistors as detectors in flow-injection analysis

The development of enzyme-modified bio-field-effect transistors (BioFETs) for the determination of glucose, urea, penicillin G, penicillin V and cephalosporin C is reported. BioFETs are produced by covering the pH-sensitive gate areas of ion-selective field-effect transistors with enzyme membranes. The characteristics of the resulting BioFETs and the influence of several parameters, e.g., pH and buffer capacity, are described. The measuring range covers 1–2 orders of magnitude of substrate concentration, and the BioFETs are applicable for 3–12 weeks, depending on the enzyme. They show a short response time and are well suited for detection in flow systems. The frequency of determination with BioFETs in flow systems is high (15–20 measurements per hour). The application of a BioFET in on-line bioprocess control is described. A glucose oxidase FET monitors the glucose concentration during cultivation of Escherichia coli. The results correspond well with off-line liquid chromatographic determinations.     

Design and properties of a flow-injection analysis cell using potassium-selective ion-sensitive field-effect transistors as detection elements

The combination of flow-injection analysis (FIA) and chemically modified ion-sensitive field-effect transistors (CHEMFETs) is described. In a wall-jet cell, two identical potassium-selective CHEMFETs were used for a differential measurement using a platinum (pseudo-)reference electrode. Silicone-rubber membrane materials, chemically bound to the SiO₂ gate oxide, were used with valinomycin as the ionophore. The optimized FIA system showed a linear response of 56 mV per decade for potassium concentrations above 5 × 10^?5 M. Preliminary results of potassium determinations in human serum and urine samples are presented.     

Potassium Ion-Selective Field-Effect Transistor (ISFET) Sensors: Studies on Gate Dimensions and Ion-Implantation Levels

Abstract

Silicon nitride membrane ISFET sensor chips have been produced with varying gate dimensions. A series of width/length (W/L) aspect ratios have been examined, combined with three levels of boron ion-implant. The level of ion-implantation affects the threshold voltage; this is important as a low threshold voltage allows the use of low noise operating conditions. Gate dimensions are also important factors for they determine the level of drain current for a given gate and drain voltages. A novel design feature, aimed at achieving wide gates, is the use of folded gates as well as having a straight structure. The evaluation of devices with gates covered with poly(vinyl chloride) (PVC)-valinomycin-dioctyl adipate was based on their response to potassium chloride standards when it was shown that there may be a maximum width of gate above which there is no improvement of response. Also, the effect of folding the gate structure is discussed and shown to be tenable, thus permitting greater miniaturisation.     

New directions for carbon-based detectors: exploiting the versatility of carbon substrates in electroanalysis

The different approaches that have been taken in the development of electrochemical detectors incorporating carbon as the principal electrode substrate are reviewed. The multitude of forms that carbon can take provides an extremely versatile platform upon which to enhance the detector performance. The different approaches that have been taken in recent years have been critically appraised and the emergence of new composite technologies is highlighted. The role of carbon and the applications to which it has been employed are presented and compared and contrasted within the remit of electroanalytical investigations.     

Nitrate ion-sensitive field effect transistor based on bis(bathocuproin)-copper(I) nitrate dissolved in solid solvents

Nitrate-selective ion-sensitive field effect transistors (ISFETs) were prepared by dip-coating the silica gate insulator surface with an ion exchanger based on bis(bathocuproin)-copper(I) nitrate in a molten mixture of docosan 1-ol and Triphenylphosphate. This sensor showed a linear response from 10⁻¹ mol dm⁻³ to at least 10⁻⁵ mol dm⁻³ and maintained its response characteristics for as long as 5 weeks. The selectivity sequence for common anions such as Cl0−₄ and Cl− followed the conventional Hofmeister series. This sensor was applied to rain water analysis.     

Evaluation of stationary phases and gas chromatographic detectors for determination of amines in water

For the first time, a systematic overview deals with the advantages and disadvantages of several stationary phases (polar and non‐polar) and gas chromatographic detectors (flame ionization detector, nitrogen–phosphorus detector and MS) for the determination of 27 amines (aliphatic and aromatic amines and N‐nitrosamines) in water samples. To increase sensitivity (250 mL of sample was eluted with 150 μL of solvent) and matrix elimination, an automatic SPE system was employed prior to GC determination. The best results in terms of resolution and retention times were achieved using a column coated with 5% phenyl‐dimethylpolysiloxane (DB‐5). Capacity factor (k) values for the 27 amines increased with the rise in the polarity of the stationary phase, ranging from 3.0–27.7 and 2.2–14.4 for polar (polyethylene glycol) and non‐polar (DB‐5) columns, respectively. The detection limits of the method were 0.9–9 μg/L for flame ionization detector, 8–95 ng/L for nitrogen–phosphorus detector and 0.2–6.3 ng/L for MS. The precision was similar for the three detectors (RSD, 3.7–6.0%). The GC‐MS method was applied with a high degree of accuracy and precision to determine amines in real samples including tap, river, pond, well, swimming pool and wastewaters.     

Direct Solvothermal Synthesis of B/N‐Doped Graphene

Heteroatom‐doping into graphitic networks has been utilized for opening the band gap of graphene. However, boron‐doping into the graphitic framework is extremely limited, whereas nitrogen‐doping is relatively feasible. Herein, boron/nitrogen co‐doped graphene (BCN‐graphene) is directly synthesized from the reaction of CCl₄, BBr₃, and N₂ in the presence of potassium. The resultant BCN‐graphene has boron and nitrogen contents of 2.38 and 2.66 atom %, respectively, and displays good dispersion stability in N‐methyl‐2‐pyrrolidone, allowing for solution casting fabrication of a field‐effect transistor. The device displays an on/off ratio of 10.7 with an optical band gap of 3.3 eV. Considering the scalability of the production method and the benefits of solution processability, BCN‐graphene has high potential for many practical applications.     

A new anion-sensitive biosensor using an ion-sensitive field effect transistor and a light-driven chloride pump,halorhodopsin

A new biosensor sensitive to chloride anion using a light-driven chloride pump protein, halorhodopsin (hR), and an ion-sensitive field effect transistor (ISFET) has been developed. Membrane vesicles of halophilic bacteria containing hR were immobilized in the matrix of polyvinylbutyral resin on the surface of the ISFET. The gate voltage of this device changed in the min time scale under yellow light illumination. The response for chloride anion increased according to the increase of chloride anion concentration in the bulk aqueous phase. In the dark, the gate potential did not change even in the presence of chloride anion. These chloride-dependent gate potential changes of the hR-ISFET indicate that the chloride pumping by hR is active on the ISFET and that ISFET detects the light-dependent chloride transport by hR.     

Application of enzyme-field effect transistor sensor arrays as detectors in a flow-injection analysis system for simultaneous monitoring of medium components. Part II. Monitoring of cultivation processes

Glucose, maltose, sucrose, lactose, ethanol and urea concentrations were monitored simultaneously during the cultivation of Escherichia coli and Saccharomyces cerevisiae by means of enzyme field effect transistors (EnFETs) applying glucose dehydrogenase (GDH), maltase (MAL)/GDH, invertase (INV)/GDH, β-galactosidase (β-GAL)/galactosedehydrogenase (GALDH), alcoholdehydrogenase (ADH)/aldehydedehydrogenase (ALDH), and urease. These enzymes were (co)immobilized on the pH sensitive gates of an eight-FET array. The FET array was integrated in a commercial FIA system.     

Processing and error analysis of signals in flow-injection analysis

The processing and error analysis of signals in flow-injection systems were systematically studied by simulation and experimental measurements. The content includes an error analysis for peak-height and peak-area signal, a least-squares filtering procedure applied to the flow-injection curve and a peak recognition to remove interferences from air bubbles. Simulation results were obtained by statistical processing of peak-height and peak-area values from Gaussian curves to which noise had been added. The experimental measurements were done by an automatic flow-injection device to obtain detailed information for each individual point of a peak. 2-(2-Arsenophenylazo)-7-(2,6-dichlorophenylazo-4-sulphonic acid)-1,8-dihydroxynaphthalene-3,6-disulphonic acid (DCSA) was used for measuring physical dispersion alone, and Fe(II)-o-phenanthroline for the measurement of both physical dispersion and chemical reaction. The results from computer simulation and experiments agreed well.     

有机场效应晶体管和分子电子学研究进展

近几年来,有机场效应晶体管在材料和器件方面都取得了长足的进展,成为分子电子学的一个重要方向。本文从有机半导体材料设计、有机半导体器件的构筑、单分子电子器件和纳米管在电子器件中的应用等方面,简单综述了有机场效应晶体管和分子电子学的最新研究进展。     

Mirror‐Image Photoswitching of Individual Single‐Walled Carbon Nanotube Transistors Coated with Titanium Dioxide

Dotting the i's : Stimuli‐responsive optoelectronic devices are formed from the title transistors functionalized with photoactive quantum dots. The p‐type semiconducting tubes show a fast current decrease under UV irradiation and reversibility when the UV irradiation is switched off. In contrast, ambipolar tubes show mirror‐image photoswitching effects when negative and positive gate bias voltages are applied.

     

Tertiary Amines Differentiated from Primary and Secondary Amines by Active Ester‐Functionalized Hexabenzoperylene in Field Effect Transistors

Herein, we report two novel derivatives of hexabenzoperylene (HBP) that are functionalized with ester groups. Methyl acetate functionalized HBP ( 1 ) in single crystals self‐assembles into a supramolecular nanosheet, which has a two‐dimensional π‐stack of HBP sandwiched between two layers of ester groups. With the same self‐assembly motif, active ester‐functionalized HBP ( 2 ) in field effect transistors has enabled differentiation of tertiary amines from primary and secondary amines, in agreement with the fact that active ester reacts with primary and secondary amines but not with tertiary amines to form amides.     

A Pentacyclic Nitrogen‐Bridged Thienyl–Phenylene–Thienyl Arene for Donor–Acceptor Copolymers: Synthesis,Characterization, and Applications in Field‐Effect Transistors and Polymer Solar Cells

A pentacyclic benzodipyrrolothiophene ( BDPT ) unit, in which two outer thiophene rings are covalently fastened with the central phenylene ring by nitrogen bridges, was synthesized. The two pyrrole units embedded in BDPT were constructed by using one‐pot palladium‐catalyzed amination. The coplanar stannylated Sn‐BDPT building block was copolymerized with electron‐deficient thieno[3,4‐c]pyrrole‐4,6‐dione ( TPD ), benzothiadiazole ( BT ), and dithienyl‐diketopyrrolopyrrole ( DPP ) acceptors by Stille polymerization. The bridging nitrogen atoms make the BDPT motif highly electron‐abundant and structurally coplanar, which allows for tailoring the optical and electronic properties of the resultant polymers. Strong photoinduced charge‐transfer with significant band‐broadening in the solid state and relatively higher oxidation potential are characteristic of the BDPT‐based polymers. Poly(benzodipyrrolothiophene‐alt‐benzothiadiazole) ( PBDPTBT ) achieved the highest field‐effect hole mobility of up to 0.02 cm² V^?1 s^?1. The photovoltaic device using the PBDPTBT /PC₇₁BM blend (1:3, w/w) exhibited a V_oc of 0.6 V, a J_sc of 10.34 mA cm^?2, and a FF of 50 %, leading to a decent PCE of 3.08 %. Encouragingly, the device incorporating poly(benzodipyrrolothiophene‐alt‐thienopyrrolodione) ( PBDPTTPD )/PC₇₁BM (1:3, w/w) composite delivered a highest PCE of 3.72 %. The enhanced performance arises from the lower‐lying HOMO value of PBDPTTPD to yield a higher V_oc of 0.72 V.     

Synthesis and Characterization of Hexathiophenes with Methylthienyl Side Chains

Summary: Two novel conjugated isomeric hexathiophenes 6T1 and 6T2 bearing 5-methyl-2-thienyl substituents have been synthesized by Suzuki coupling and oxidative dimerization method. These isomers were characterized by ¹H NMR, ¹³C NMR, elemental and mass analysis. The two hexamers show good solubility in common solvents and show almost identical UV-vis absorption spectra in solution with a maximum cantered at 387 nm. These materials bearing thienyl substituents in the sidechain are anticipated to provide better charge transport in devices and hold promise for use in organic field effect transistors.