Separation methods for captopril in pharmaceuticals and biological fluids

Captopril (CAP) is an orally active angiotensin-converting enzyme (ACE) inhibitor and has been widely used for management of hypertension and congestive heart failure. CAP lacks an aromatic chromophore required for facile direct UV detection and also has two chiral centers. These factors can render the determination of CAP in complex matrices challenging. This review covers more than 20 years of analytical research on this drug, focusing mainly on pharmaceutical and biological applications. The primary separation techniques discussed are gas chromatography, liquid chromatography, and capillary electrophoresis. The structures of the CAP derivatizing agents as well as a table summarizing various HPLC methods are provided. A discussion of key recent chromatographic and electrophoretic methods for other ACE inhibitors is also present.     

Terbium-sensitized luminescence optosensor for the determination of norfloxacin in biological fluids

The use of a flow through solid phase terbium-sensitized luminescence system is described for the determination of the widely used fluoroquinolone norfloxacin. A chelate between the terbium ion and the analyte is formed online previously to the sample injection into the carrier stream. Then the chelate is transported towards the flow-through cell, where it is retained on a cationic Sephadex resin packed in the cell, developing the corresponding luminescence signal. Afterwards, an ethylenediaminetetraacetic acid solution was used as eluting agent, in order to regenerate the sensing zone. The system has been satisfactorily applied to the determination of norfloxacin in human urine and serum, without the need of a pre-treatment. The response was linear in the range 10-150 ng ml⁻¹. The detection and quantification limits were 1.5 and 5 ng ml⁻¹, respectively and the R.S.D. 1.82%.     

An overview of the analytical methods for the determination of organic ultraviolet filters in biological fluids and tissues

Organic UV filters are chemical compounds added to cosmetic sunscreen products in order to protect users from UV solar radiation. The need of broad-spectrum protection to avoid the deleterious effects of solar radiation has triggered a trend in the cosmetic market of including these compounds not only in those exclusively designed for sun protection but also in all types of cosmetic products.     

Analysis of carboxylic acids in biological fluids by capillary electrophoresis

This review article addresses the different capillary electrophoretic methods that are being used for the study of both short-chain organic acids (including anionic catecholamine metabolites) and fatty acids in biological samples. This work intends to provide an updated overview (including works published until November 2004) on the recent methodological developments and applications of such procedures together with their main advantages and drawbacks. Moreover, the usefulness of CE analysis of organic acids to study and/or monitor different diseases such as diabetes, new-borns diseases or metabolism disorders is examined. The use of microchip devices and CE-MS couplings for organic acid analysis is also discussed.     

Determination of chlorproguanil and metabolites in biological fluids

Summary The retention behaviour of chlorproguanil and its putative metabolites chlorcycloguanil and 3,4-dichlorophenylbiguanide has been studied on a reversed phase chromatographic system incorporating sodium lauryl sulphate as hydrophobic pairing ion. On the basis of data obtained and comparison of standard compounds with components present in urine following the administration of chlorproguanil, the identity of the metabolites have been confirmed chromatographically. A third unidentified metabolite is also observed. The retention study allows selection of a solvent system which, when used with a small volume, 100 × 2 mm, 3μm ODS column, enables chlorproguanil and its two major metabolites to be determined in plasma, whole blood and urine. The analytical characteristics of the method are reported and the usefullness of the method in obtaining pharmacokinetic data on the drug and its metabolites is discussed.     

Sample pretreatment for the capillary electrophoretic determination of organic acids in chromium(III) plating baths

This work deals with the development and optimization of the sample pretreatment and consequent electrophoretic analysis of two modern plating baths containing chromium(III) and either citric acid or oxalic acid. Some model mixtures containing known amounts of components of industrial baths have been prepared to simulate simplified bath matrices. Prior to analysis, a sample pretreatment consisting of the addition of some agents that could release acid from the stable chromium complex was tested. Determination of organic anions was accomplished by indirect UV detection. The best results were achieved by precipitation of chromium(III) hydroxide. The content of oxalate and citrate in real samples was calculated as 96.5% (SD 2.3%) and 97.3% (SD 0.8%), respectively, of the declared amount. Very good robustness of the method and satisfactory repeatability of migration time and peak area were obtained. This simple inexpensive method is suitable for routine determination of citric and oxalic acid in chromium(III)‐based plating baths.     

Development of a validated HPLC method for the determination of four 1,4-benzodiazepines in human biological fluids

A simple and sensitive HPLC method was developed and validated for the determination of four frequently prescribed 1,4-benzodiazepines: alprazolam (ALP), bromazepam (BRZ), diazepam (DZP), and flunitrazepam (FNZ). Separation was achieved on an Inertsil C8 analytical (250 mm x 4 mm, 5 microm) column, after selective extraction of benzodiazepine drugs from biological matrices by means of SPE. Isocratic elution was performed with a mobile phase consisting of CH3COONH4, 0.05 M CH3OH, and CH3CN (33:57:10 by volume). Quantification was performed at 240 nm with mefenamic acid (6 ng/microL) as the internal standard. DSC-18 Supelco cartridges provided high absolute recoveries (81-115%). The developed method was fully validated in terms of selectivity, linearity, accuracy, precision, stability, and sensitivity. Repeatability (n = 8) and between-day precision (n = 8) revealed RSD <12%. Recoveries from biological samples ranged from 81.2 to 115%. The detection limit of the method was calculated as 3.3-10.2 ng in blood plasma and 2.6-12.6 ng in urine for 20 microL injection volume. The method was applied to spiked biological matrices. Moreover, the method was applied to real samples of urine after an oral administration.     

Sample preparation for gas chromatographic determination of halogenated volatile organic compounds in environmental and biological samples

In this review, the wide spectrum of the techniques of isolation and/or preconcentration and final determination of halogenated volatile organic compounds (HVOCs) in water, air, soil, sediment and biological fluids are presented and discussed. The techniques discussed are solvent microextraction, solid phase extraction, gas extraction (static and dynamic techniques), membrane processes and passive sampling. Also, direct techniques, such as direct aqueous injection into gas chromatography (GC) column and membrane inlet mass spectrometry, are presented. Main attention is paid to the practical application of these techniques during all HVOCs determination.     

Isotachophoretic separation of organic acids in biological fluids

The operating conditions for the isotachophoretic separation of organic acids were evaluated. At pH values ranging from 2.90 to 4.25 both relative step heights and molar flow-rates were determined experimentally for 26 anions. Comparing the observed values with simulated data, highly significant (p = 0.0001) correlation coefficients of 0.993 and 0.920, respectively, were found at pH 3.50. Whereas the concentration of the leading electrolyte did not affect the relative step heights, it increased the molar flow-rates significantly. The same applied to the detection current. The time of analysis was observed to be a function of the concentration of the leading electrolyte. However, the time elapsed between injection of the analyte and its detection depended solely on the volume and not on the amount of analyte injected. In isotachophoresis, incomplete separation of two compounds is indicated by the occurrence of a mixed zone which can hardly be distinguished from a pure zone. Thus, knowledge of the separation capacity is a prime prerequisite in optimizing the system for the analysis of biological fluids. The separability of nine equimolar pairs of anions was determined at pH values ranging from 2.90 to 4.25. Although two ionogenic constituents would separate only when their migration rates in the mixed state were different, no clear correlation was observed between separation capacity and difference in relative mobility. Separability, however, was found to increase with increasing concentration of the leading electrolyte. While the separation capacity was not influenced by the electric current, it was significantly affected by the volume injected. In subsequent analyses of serum, cerebrospinal fluid, seminal plasma and prostatic fluid, a variety of organic acids could be detected. Calibration graphs for the detected anions revealed a detection limit of 1 nmol and linearity over their biological concentration ranges. Further, the isotachophoretic results correlated well with high-performance liquid chromatographic and enzymatic analyses of citric acid and lactic acid in human seminal plasma and cerebrospinal fluid, respectively.     

Spectrofluorometric determination of nicardipine,nifedipine and isradipine in pharmaceutical preparations and biological fluids

A simple and highly sensitive spectrofluorometric method was developed for the determination of some 1,4-dihydropyridine compounds namely, nicardipine, nifedipine and isradipine in pharmaceutical preparations and biological fluids. The method is based on the reduction of nicardipine, nifedipine and isradipine with Zn/HCl and measuring the fluorescence intensity obtained (λ_em/λ_ex) at 460/364, 450/393 and 446/360 nm, respectively. The factors affecting the development of the fluorophore and its stability were studied and optimized. The effect of some surfactants such as β-cyclodextrin (βCD), carboxymethylcelullose (CMC), sodium dodecyl sulphate (SDS) and triton X-100, on the fluorescence intensity was studied. The fluorescence intensity-concentration plots of nicardipine, nifedipine and isradipine were rectilinear over the ranges 0.4–6.0, 0.2–4.0 and 0.1–9.0 μg ml⁻¹ with detection limits of 0.0028, 0.017 and 0.016 μg ml⁻¹, respectively. The proposed method was successfully applied to commercial tablets containing the compounds; the percentage recovery agreed well with those obtained using the official methods. The method was further extended to the in vitro determination of the compounds in spiked human plasma and urine samples. A proposal of the reduction reaction pathway was postulated.      

Stir bar sorptive extraction for central nervous system drugs from biological fluids

A review with 75 references is presented that deals with the reported methods for analysis of some important central nervous system (CNS) drugs in biological fluids utilizing stir bar sorptive extraction (SBSE) technique covering the years from 2000 to 2008. The theoretical aspects of SBSE, as well as an significant number of applications have been published, showing the advantages of this technique over the classical extraction techniques (liquid–liquid extraction (LLE) and solid-phase extraction (SFE). In this review, recent SBSE developments and a focus on the development of new instrumental approaches and sorbent phases are presented.     

Using capillary electrophoresis for the determination of organic acids in Port wine

The simultaneous separation and determination of organic acids in several samples of white and red Port wines was performed by capillary zone electrophoresis using indirect UV detection with 2,6-pyridinedicarboxylic acid as a background electrolyte buffer. Operational parameters like migration time, temperature, voltage and capillary length were optimized. Sixteen samples of red wine and four samples of white wine were used to analyze for tartaric, malic, lactic, succinic and acetic acids using glyoxylic acid as the internal standard. The method is rapid, sensitive and quantitative, and time-consuming sample preparation, such as solid-phase extraction or liquid-liquid extraction procedure, is not required.     

Flow-injection enhanced chemiluminescence method for determination of ciprofloxacin in pharmaceutical preparations and biological fluids

A novel rapid and sensitive analytical method, enhanced chemiluminescence with flow-injection sampling, is described for determination of ciprofloxacin. The method is based on the chemiluminescence reaction of the potassium permanganate–sodium thiosulfate–ciprofloxacin system. An enhanced chemiluminescence reaction was developed, and optimum conditions for CL emission were investigated. The chemiluminescence intensity was linearly dependent on ciprofloxacin concentration in the range 1.0×10⁻⁸–1.0×10⁻⁵ g mL⁻¹. The detection limit was 4×10⁻⁹ g mL⁻¹. The relative standard deviation was 1.8% for eleven measurements of 2.0×10⁻⁷ g mL⁻¹ ciprofloxacin standard solution. The new method enables simple, sensitive, and rapid determination of ciprofloxacin and has been successfully used for determination of ciprofloxacin in biological fluids and in ciprofloxacin hydrochloride tablet and injection.     

High-throughput microwave-digestion procedures to monitor neurotoxic elements in body fluids by means of inductively coupled plasma mass spectrometry

Microwave (MW) digestion procedures with high sample throughput (simultaneous digestion of 36 or 80 samples) and procedural simplicity (disposable plastic tubes, or re-usable liners with screw-cap) were investigated for their efficiency in routine analyses of biological samples. Different digestion vessel materials were tested for metal leaching/adsorption and thermal resistance: quartz, glass, polyethylene (PE) and polystyrene (PS). For the instrumental quantification of Al, Bi, Cd, Co, Cr, Hg, Mn, Mo, Ni, Pb, Sb, and Tl at ultra-trace levels in urine, serum, and whole blood, sector field inductively coupled plasma mass spectrometry (SF-ICP-MS) was used. The different pretreatment conditions and vessels were evaluated in terms of contamination risk, effective power of detection, accuracy, and precision. Results of analyses of serum, urine and whole blood certified reference materials (CRMs) were fully satisfactory for almost all the analytes. In the case of Hg, Mo, and Tl in serum digested in plastic containers the results were just below the lower limit of uncertainty of the certified range. On the basis of the present data the following MW procedures can be suggested: 1. for urine, digestion with nitric acid at atmospheric pressure in plastic vials; 2. for serum, digestion with nitric acid at atmospheric pressure in glass vessels; and 3. for whole blood, digestion under pressure in quartz tubes.Because of the levels of the procedural blanks, Bi was not measurable at the concentrations expected in human fluids, and Al was accurately detectable in whole blood only.     

Sample preparation for gas chromatographic analysis of organic solvents in aerosol cans

Summary A method for the sampling of chemical products from aerosol cans is described. An aerosol can is frozen in liquid nitrogen, followed by puncturing the can and allowing the propellant to distill off. The conditions for the smaple preparation have been optimized. Solvent content in the products were analysed by headspace gas chromatography-mass spectrometry.     

The role of organic acids in mineral weathering

Organic acids and their anions (for brevity we shall use the term “acids” to include both) may affect mineral weathering rates by at least three mechanisms: by changing the dissolution rate far from equilibrium through decreasing solution pH or forming complexes with cations at the mineral surface; by affecting the saturation state of the solution with respect to the mineral; and by affecting the speciation in solution of ions such as Al³⁺ that themselves affect mineral dissolution rate. In this paper we review the effects of organic acids on the dissolution rates of silicate minerals, particularly feldspars, under conditions approximating the natural weathering environment −25°C, pH 4–7 and with concentrations of organic acids comparable to those measured in soil solutions.

Feldspar dissolution rates far from equilibrium increase with decreasing pH below pH 4–5. They appear to be independent of pH between pH 4–5 and about 8, and above pH 8 feldspar dissolution rates increase with increasing pH.

Small chelating ligands such as oxalate appear to accelerate feldspar dissolution through complexation of Al at the surface of the mineral. Feldspar dissolution rates in the presence of 1 mM oxalic acid show effects ranging from no enhancement to enhancements of a factor of 15, depending upon the data set, pH, and aluminum content of the mineral: there is a great deal of scatter in the available data. In general, concentrations of oxalate of the order of 1 mM are necessary to cause a significant effect. Humic acids do not appear to increase feldspar dissolution rates significantly.

Dissolution rates must decrease as the solution approaches saturation with respect to the primary phase (the chemical affinity effect). Organic acids will influence chemical affinity by complexing Al (and possibly other elements) in solution and hence decreasing the chemical activity of Al³⁺. There are essentially no data on the effect of chemical affinity on feldspar dissolution rate at 25°C and mildly acid pH, so it is hard to evaluate the importance of organic acids in accelerating silicate dissolution through the chemical affinity effect. The effect of complexation of dissolved Al does not appear to be an important determinant of silicate dissolution rates in nature.

Observed rates of silicate weathering in the field are typically much slower than predicted from laboratory experiments far from equilibrium, suggesting control by transport of solutes between “micropores” and “macropores” (“micropores” include fractures and crystal defects within grains). If such transport is rate-controlling, analysis of the effect of organic acids on weathering rates in nature in terms of dissolution rates far from equilibrium may be misleading.     

Molecularly imprinted polymer based potentiometric sensor for the determination of hydroxyzine in tablets and biological fluids

Molecular imprinting is a useful technique for the preparation of functional materials with molecular recognition properties. In this work, a biomimetic potentiometric sensor, based on a non-covalent imprinted polymer, was fabricated for the recognition and determination of hydroxyzine in tablets and biological fluids. The molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization, using hydroxyzine dihydrochloride as a template molecule, methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylat (EGDMA) as a cross-linking agent. The sensor showed a high selectivity and a sensitive response to the template in aqueous system. The MIP-modified electrode exhibited a Nernstian response (29.4 ± 1.0 mV decade⁻¹) in a wide concentration range of 1.0 × 10⁻⁶ to 1.0 × 10⁻¹ M with a lower detection limit of 7.0 × 10⁻⁷ M. The electrode demonstrated a response time of ∼15 s, a high performance and a satisfactory long-term stability (more than 5 months). The method has the requisite accuracy, sensitivity and precision to assay hydroxyzine in tablets and biological fluids.     

Dynamic control and indirect absorption detection for high-speed capillary electrophoretic separation of organic acids

Dynamic control and indirect absorption detection have been combined for the separation of eight small aliphatic organic acids in less than 4 min. Electroosmotic flow (EOF) coefficients in 5 mM 8-hydroxyquinoline-5-sulfonic acid (8-HQSA) (pH 3.00) and 3 mM 1,2,4,5-benzenetetracarboxylic acid (BTA) solutions are 4.35 and 1.65·10⁻⁴ cm²/V s, respectively. In the BTA system, relatively large amounts of sodium ions adsorbed into the capillary wall are the most probable reason for the small EOF, in turn causing problems for the separation of all acids. In contrast to BTA, 8-HQSA could be used for the separation of all eight organic acids. Limits of detection of analytes are at the level of several tens of μM at pH 3.00 in the 8-HQSA system. This new technique provides several features such as high speed, reasonable resolution and sensitivity, and ease of operation.     

Development and validation of an HPLC method for the determination of benzodiazepines and tricyclic antidepressants in biological fluids after sequential SPE

A novel method for the simultaneous determination of six benzodiazepines (BZDs) and four tricyclic antidepressants (TCAs) in biological fluids by HPLC with UV detection at 240 nm has been developed. After a deproteinization step biological fluids were analyzed by direct injection. SPE on Nexus cartridges was also applied. Since two compounds, namely imipramine and diazepam, were coeluting, a sequential SPE protocol has been developed. BZDs were eluted by a mixture of methanol/ACN(1:1), followed by the elution of TCAs with methanol. Separation was performed on a Kromasil C8 column (250 x 64 mm(2) id, 5 microm) using a mobile phase of 0.05 MCH3COONH4/ACN/methanol (initial composition 55:15:30 v/v/v) at a flow rate of 1.0 mL/min delivered by a gradient program within 15 min. Colchicine was used as the internal standard (4 ng/microL). The method was linear for all analytes up to 20 ng/lL, with coefficients of regression between 0.996 and 0.99996. LODs and LOQs were 0.08-1.17 and 0.28-3.91 ng/lL, respectively. Recovery was in the range of 92.8-108.7% for within-day and 91.9-109.9% for between-day assays, with RSD values lower than 10.0% for all matrices.     

Development of a validated HPLC method for the determination of B-complex vitamins in pharmaceuticals and biological fluids after solid phase extraction

An HPLC method was developed for the simultaneous determination of seven water-soluble vitamins, viz. thiamine, riboflavin, nicotinic acid, nicotinamide, pyridoxine, cyanocobalamin, and folic acid, in multivitamin pharmaceutical formulations and biological fluids (blood serum and urine). Separation was achieved at ambient temperature on a Phenomenex Luna C18 (150 x 4.6 mm) analytical column. Gradient elution was performed starting at a 99:1 A:B v/v composition, where A: 0.05 M CH3COONH4/CH3OH (99/1) and B: H2O/CH3OH (50/50), at a flow rate of 0.8 mL/min. After a 4-min isocratic elution the composition was changed to 100% of B in 18 min and elution continued isocratically for 8 min. Detection was performed with a photodiode array detector at 280 nm. Each vitamin was quantitatively determined at its maximum wavelength. Spectral comparison was used for peak identification in real samples. Detection limits were in the range of 1.6-3.4 ng, per 20-microL injection, while linearity held up to 25 ng/microL. Accuracy, intra-day repeatability (n = 6), and inter-day precision (n = 7) were found to be satisfactory. Theobromine (2 ng/microL) was used as internal standard. Sample preparation of biological fluids was performed by SPE on Supelclean LC-18 cartridges with methanol-water 85/15 v/v as eluent. Extraction recoveries from biological matrices ranged from 84.6% to 103.0%.