Determination of molybdenum in infant formula and human milk by electrothermal atomic absorption spectrometry with barium difluoride as matrix modifier

A method for the determination of molybdenum in infant formula and human milk by electrothermal atomic absorption spectrometry was developed and optimized. Samples were injected directly in the graphite tube with barium difluoride as the matrix modifier. The detection limit was 0.89 μg Mo l^?1. The molybdenum levels found in infant formula and human milk were 0.09–2.23 μg Mo g^?1 and 2.32–8.38 μg Mo l^?1, respectively.     

Determination of arsenic by hydride generation with a long absorption cell for atomic absorption spectrometry

A method is described for the determination of arsenic involving hydride generation and atomic absorption spectrometry with an improved long graphite-tube furnace capable of considerably higher temperatures than the conventional quartz-tube heaters. Arsine is generated with sodium tetrahydroborate, held in a nitrogen-cooled trap and then swept with helium into an alumina tube (19 cm long) placed within the graphite furnace. The optimum conditions for determination of arsenic are given. The detection limit is 0.2 ng ml^?1 with RSD of 2–3%. Results for various NBS Standard Reference Materials agreed well with expected values and were as follows: orchard leaves, 10 ± 1 μg g^?1; tomato leaves, 0.28 ± 0.03 μg g^?1; bovine liver, 0.046 ± 0.005 μg g^?1.     

Determination of vanadium in urine by electrothermal atomic absorption spectrometry

After wet ashing of the urine sample with nitric acid, vanadium is chelated with cupferron, extracted into 4-methylpentan-2-one and determined by atomic absorption spectrometry with a pyrolytically-coated graphite furnace atomizer. The sensitivity allows the precise determination of 1–500 μg V l^-1 in urine. The coefficient of variation for triplicate urine measurements is <8% for 10 μg V l^-1.     

Determination of riboflavin in pharmaceutical products by automatic discrete-sample analysis

A procedure for the determination of iron, copper, nickel, cobalt, manganese and chromium down to 0.01 μg g^-1 in sodium calcium silicate glass, sodium borosilicate glass, sodium carbonate and calcium carbonate is described. The analytical procedure depends on the separation at pH 6 of the metal diethyldithiocarbamates into isobutyl methyl ketone, and their determination by flameless atomic absorption spectrometry, with a Massmann-type graphite furnace. The limiting factors on the detection limits attainable are discussed and related to the purity of the acids used for sample solution, sample contamination during chemical separation and the sensitivity of the analytical technique.     

The determination of platinum and palladium in rocks and soils by electrothermal atomic absorption spectrometry of extracts of their iodo complexes

The method developed for determining platinum and palladium in rocks and soils is based on extraction of iodo complexes of these elements into methyl isobutyl ketone (MIBK), followed by electrothermal atomic absorption spectrometry of the extracts. The limit of detection is 10 ng g^?1 for platinum and 3 ng g^?1 for palladium. Analysis of the standard noble metal ore PTC-1 with recommended values of 12.7 μg g^?1 for palladium and 3.0 μg g^?1 for platinum gave precisions of 4.4% and 5.6%, respectively, and deviations of 5.0% and 1.2% from the recommended values. The method is applicable to the determination of both elements in a wide variety of rocks and soils.     

Determination of total tin in geological materials by electrothermal atomic absorption spectrometry

A graphite-furnace atomic-absorption spectrometric method is described for the determination of total tin in geological materials. Samples are decomposed by fusion with lithium metaborate and the melt is dissolved in diluted (1 + 9) nitric acid. Spectral and non-spectral interferences are minimized by a combination of platform volatilization, “normal” heating rate, addition of ammonia as chemical modifier, use of integrated absorbance values and Zeeman background correction. Results are reported for six reference materials showing good accuracy and a precision of 12% at the 3 μg g^?1 level. The detection limit for tin in the original materials in 0.7 μg g^?1.     

Direct determination of Cu,Mn, Pb,and Zn in beer by thermospray flame furnace atomic absorption spectrometry

In this work, thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) was employed for Cu, Mn, Pb, and Zn determination in beer without any sample digestion. The system was optimized and calibration was based on the analyte addition technique. A sample volume of 300 μl was introduced into the hot Ni tube at a flow-rate of 0.4 ml min⁻¹ using 0.14 mol l⁻¹ nitric acid solution or air as carrier. Different Brazilian beers were directly analyzed after ultrasonic degasification. Results were compared with those obtained by graphite furnace atomic absorption spectrometry (GFAAS). The detection limits obtained for Cu, Mn, Pb, and Zn in aqueous solution were 2.2, 18, 1.6, and 0.9 μg l⁻¹, respectively. The relative standard deviations varied from 2.7% to 7.3% (n=8) for solutions containing the analytes in the 25–50 μg l⁻¹ range. The concentration ranges obtained for analytes in beer samples were: Cu: 38.0–155 μg l⁻¹; Mn: 110–348 μg l⁻¹, Pb: 13.0–32.9 μg l⁻¹, and Zn: 52.7–226 μg l⁻¹. Results obtained by TS-FF-AAS and GFAAS were in agreement at a 95% confidence level. The proposed method is fast and simple, since sample digestion is not required and sensitivity can be improved without using expensive devices. The TS-FF-AAS presented suitable sensitivity for determination of Cu, Mn, Pb, and Zn in the quality control of a brewery.     

Determination of barium in sea water by cation- exchange separation and electrothermal atomic absorption spectrometry

A method is described for the routine determination of barium in sea water by graphite-furnace atomic absorption spectrometry. Barium is separated from the main sea- water cations by collection on a cation-exchange resin. The barrium is extracted into nitric acid from a portion of the resin for injection into the pyrolytically-coated graphite furnace. The method is satifactory for the low μg l^?1 levels of barium present in ocean water, with recoveries ?99% and a relative standard deviation of <5%.     

Rapid determination of copper,nickel, lead and cadmium in small samples of estuarine and coastal waters by liquid/liquid extraction and electrothermal atomic absorption spectrometry

A rapid liquid/liquid extraction of 1.25-ml samples is used with graphite-furnace atomic absorption spectrometry for the determination of dissolved trace metals in saline waters. The metals are chelated with ammonium pyrrolidine dithiocarbamate and extracted into 1,1,1-trichloroethane; 20–40 μl of extract is injected into the furnace. Sample manipulation and overall time are greatly decreased compared to other similar large-scale extraction methods; all the chemical steps are done in the sample cups of an auto-sampler for graphite-furnace a.a.s. Detection limits (Cu 0.3 μg l^?1, Cd 0.02 μg l^?1, Pb 0.7 μg l^?1, Ni 0.5 μg l^?1 are low enough for applications in routine monitoring of filterable trace metal concentrations in coastal and estuarine waters to check for compliance with Environmental Quality Standards that apply in the European Community.     

Determination of aluminium in silicon by electrothermal atomic absorption spectrometry

The sample is decomposed with hydrofluoric and nitric acids and the diluted solution is injected into the graphite furnace. For a 100-mg sample, the detection limit (3 σ) is 1.2 μg AI g^-1. The coefficient of variation is 3–13% for 9–7000 μg Al g^-1 in silicon.     

Determination of cadmium,indium and zinc in nickel—base alloys by atomic absorption spectrometry with introduction of solid samples into furnaces

Atomic absorption spectrometry with an induction furnace is used for the determination of cadmium (0.002–2 μg g^-1), indium (0.6–350 μg g^-1) and zinc (0.05–26 μg g^-1) in 0.8–35 mg samples of nickel—base alloys dropped into the furnace. A resistively-heated furnace is employed for the determination of lower concentrations of indium (<0.6 μg g^-1). Standardised alloys were used for calibration. Accuracy, precision and detection limits are described for numerous nickel—base alloys. With alloys containing zinc, > 0.1 μg Cd g^-1 and >0.6 &,mu;g In g^-1, the relative standard deviations are 12%, 8% and 7%, respectively. Calculated detection limits for cadmium, indium and zinc are 2 ng g^-1, 10 ng g^-1 and 10 ng g^-1, respectively.     

Determination of indium in minerals,river sediments and coal fly ash by electrothermal atomic absorption spectrometry with palladium as a matrix modifier

A method is described for the determination of indium (10–40 μg g^?1) in lead-zinc ores and magnetic pyrites. Graphite furnace atomic absorption spectrometry is used with palladium as a matrix modifier. Indium (down to 0.085 μg g^?1) in river sediments and coal fly ash can be determined after pre-extraction with ammonium iodide into 4-methyl-2-pentanone. In the presence of palladium, the maximum tolerable ashing temperatures for indium in aqueous solution or organic extract can be raised to 1200°C or 1000°C, respectively, and the sensitivity is greatly improved.     

Minimizing the effect of organic matrices in the analysis of tin-containing extracts by electrothermal atomic absorption spectrometry: Determination of Tin in rocks

The effect of the nature of the extracted complex and of the organic solvent on the sensitivity of the extraction/atomic absorption determination of tin in a graphite-furnace atomizer is investigated. It is recommended that extracts of tin as its chloride complex, or chelates with N-benzoyl-N-phenylhydroxylamine or 8-quinolinol, in organic solvents which do not contain chlorine should be used. The depressive effect of the organic matrix can be significantly decreased by using ascorbic acid as matrix modifier, by atomization from a graphite platform, and by using an atomizer coated with tungsten carbide. The procedure developed is applied to the determination of tin in rocks. For tin concentrations of 0.1–10 μg g^?1, the relative standard deviation does not exceed 10%.     

Spectrophotometric determination of silicate in natural waters by formation of α-molybdosilicic acid and reduction with a tin(IV)-ascorbic acid-oxalic acid mixture

Reaction of dissolved silicate with molybdate at pH 3.8–4.8 in acetate buffer yields only the α-molybdosilicic acid. Treatment of this acid with a solution containing tin(IV) chloride, ascorbic acid and oxalic acid rapidly gives the blue reduced acid without reducing the excess of molybdate reagent. In the recommended procedure, Beer's Law is followed at 740 nm over the range 0–2000 μg Si l^-1 with a coefficient of variation of 0.34% at 400 μg Si l^-1 and 0.52% at 40 μg Si l^-1. The sensitivity of the method is not affected by ionic strength.     

Preconcentration of palladium(II) from water with thionalide loaded on silica gel

2-Mercapto-N-2-naphthylacetamide (thionalide) on silica gel is used for rapid preconcentration of μg l^?1 levels of palladium(II) from aqueous solution, followed by atomic absorption spectrometric measurement. In batch experiments, palladium was quantitatively retained on the gel from solutions 5 M in acid to pH 8; equilibrium was achieved within 10 s. The chelating capacity of the gel was 7.5 μmol Pd g^?1 at pH < 4. The effect of flow rate on retention was studied. Palladium retained on the column was completely eluted with 20 ml of 0.2 M thiourea in 0.1 M hydrochloric acid. The palladium concentration in sea water is shown to be < 0.3 μg l^?1.     

Electrothermal atomic absorption spectrometry of elements after electrochemical deposition on graphite electrodes

The application of electrochemical deposition on graphite rods for separation and preconcentration prior to electrothermal atomic absorption spectrometry (a.a.s.) is examined. The metals to be determined are electrolyzed onto a graphite rod which is tehn transferred to a cup atomizer for a.a.s. Although only some of the element present in the solution is deposited on the surface of the graphite rod, favorable preconcentration rates are obtained. The method was tested on the determination of cadmium in aqueous solution. The precision is satisfactory for concentrations down to 5 × 10^?8 g l^?1 cadmium, and the detection limit is 4 × 10^?9 g l^?1.     

Determination of selenium in pyrite by an ion exchange-electrothermal atomic absorption spectrometric method

After acid digestion of the pyrite, the solution is passed through a Dowex 50W-X8 column, primarily to remove interference from iron, and an aliquot of the effluent is injected into the graphite furnace. The response is linear up to 200 μg Se g^-1 and the detection limit is 5 μg g^-1. After digestion, an analysis can be completed in 10 min.     

Automated method for the determination of boron in water by flow-injection analysis with in-line preconcentration and spectrophotometric detection

A sensitive, automated method for the determination of boron in water samples is described, involving flow injection with on-line ion-exchange preconcentration and spectrophotometric detection of the azomethine-H—boron complex. The method is applicable to various water samples and is free from interferences, even in coloured samples. Detection limits of 5 μg l^?1 at 20 samples h^?1 and 1 μg l^?1 at 10 samples h^?1 with relative standard deviations of < 10% at 1–10 μg l^?1 and < 5%at 10–200 μg l^?1 levels of boron were achieved. The recoveries for spiked natural water samples ranged from 96 to 101%. The method compares favourably with inductively coupled plasma atomic emission spectrometry.     

Trace metal enrichment by automated on-line column preconcentration for flow-injection atomic absorption spectrometry

An on-line column preconcentration technique for flow-injection atomic absorption spectrometry was developed. Diverse metal ions (Cd²⁺, Zn²⁺, Cu²⁺, Mn²⁺, Pb²⁺, Fe³⁺ and Cr³⁺) in solution were concentrated quantitatively by a microcolumn (7-mm × 4-mm i.d.) packed with Muromac A-1, which is an iminodiacetate chelate resin, in a flow-injection system. From the pH dependence of the uptake of the ions, all the divalent metals examined were recovered quantitatively in the pH range 3–5 and the trivalent metals were recovered at a maximum pH of 1. Enrichment factors using 20-ml samples were in the range 90–180-fold for the seven elements and the sampling rate was 13 h^?1. The 3σ detection limits were in the range 0.14–2.1 μg l^?1 and the relative standard deviations for replicate measurements (n=3–4) were in the range 0.7–1.7%. The method was compared with flame and graphite furnace atomic absorption spectrometry. Application to the determination of cadmium and copper in several standard reference materials is described.     

Quantitative goldbestimmung in filmmaterialien mittels flammenloser atomabsorption

A graphite rod electrothermal atomizer has been used for the AAS determination of traces of gold in hydrochloric and in hydrobromic acid solutions, and also after extraction into HBr-saturated methyl isobutyl ketone. Photographic film samples were decomposed first by enzyme action then by nitric acid/peroxide oxidation, and the gold was extracted into MIBK. For 10-μl aliquots of solution the 3s limits of detection were 3 × 10^?10g for aqueous solutions, 7 × 10^?10g for MIBK, and 7 × 10^?9 g/cm² for film.