Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

Cathodic stripping voltammetry of pipemidic acid and ofloxacin in pharmaceutical dosages and human urine

Sensitive cathodic stripping voltammetric methods have been developed for two quinolone antibacterial drugs, pipemidic acid (PIP) and ofloxacin (OFL) using hanging mercury drop electrode as working electrode vs. Ag/AgCl reference electrode. The methods were developed for the determination of drugs individually as well as simultaneously. 0.1 M and 0.01 M hydrochloric acid was used as medium for PIP and OFL, respectively, 0.1 M potassium chloride was used as base electrolyte. Reduction waves were observed for PIP within ?700 mV to ?800 mV and for OFL within ?1100 mV to ?1200 mV. Linear calibration ranges for PIP and OFL were observed within 10–100 μg ml^?1 with detection limits of 50 ng ml^?1 and 1 μg ml^?1, respectively. Relative standard deviations (RSD) for the analysis of 10 gµg ml^?1 of PIP and OFL (n = 6) were 0.5% and 1.4%, respectively. The presence of glucose, lactose, sorbitol, gum arabic, starch, magnesium stearate, methylparaben and propylparaben did not affect the determinations of both PIP and OFL. The methods were used for the analysis of pharmaceutical preparations and the results indicated relative deviation of 0.5–5.5% from labeled values with RSD within 0.49–2.5%. PIP and OFL could also be determined simultaneously, and were determined from spiked human urine.     

Colorimetric Determination of Propofol in Bulk form,Dosage Form and Biological Fluids

ABSTRACT

Propofol is coupled with 2, 6-dichloroquinone-4-chlorimide (DCQ) in a reaction buffered at pH 9.6 to give a colored product having an analytically useful maximum at 635 nm. The factors affecting the color generation were optimized and incorporated in the procedure. The reacted propofol has a molar absorptivity of 3.9 × 10^?4 L mol^?1 cm^?1, and Beer's law is obeyed for concentrations 1-5 μg ml^?1 with detection limit 0.25 μg ml^?1. The method was found applicable to biological fluids (plasma and urine) spiked with propofol at concentration levels 1-5 μg ml^?1 for plasma and 1-5 μg 0.5 ml^?1 urine (less sensitivity is obtained with urine volumes above 0.5 ml) with detection limits 0.28 μg ml^?1 for plasma and 0.4 μg 0.5 ml^?1 urine. The average recovery for the commercial preparation (1% w/v propofol emulsion intravenous injection for infusion) was 99.54% with an RSD of 1.05%. The method was validated by an adopted HPLC method. The results obtained by the HPLC method for the commercial preparation were statistically compared with the proposed method and evaluated at the 95% confidence limits.     

Sensitivity enhancement by palladium addition in the electrothermal atomic absorption spectrometry of mercury

In graphite-furnace atomic absorption spectrometry of mercury, addition of 50 μg ml^?1 palladium improves the peak height for 5 μg Hg ml^?1 50 times. Further addition of 20 μg ml^?1 platinum doubles the enhanced peak height. The effect is due to amalgam formation. The best sensitivity is 0.3 ng (1% absorption) and the detection limit is 0.1 ng. The method allows higher ashing temperatures than for solutions without noble metal addition and can be applied to solutions containing substantial amount of organic matter.     

Simultaneous Determination of Valsartan and Hydrochlorothiazide in Tablets by High-Performance Liquid Chromatography

ABSTRACT

A method for the simultaneous determination of valsartan and hydrochlorothiazide in tablets is described. The procedure, based on the use of reversed-phase high-performance liquid chromatography, is linear in the concentration range 5.0-10.0 μg ml^?1 for valsartan and 0.5-2.0 μg ml^?1 for hydrochlorothiazide, is simple and rapid and allows accurate and precise results. The limit of detection was 1.0 μg ml^?1 for valsartan and 0.05 μg ml^?1 for hydrochlorothiazide.     

Determination of heavy metals in real samples by anodic stripping voltammetry with mercury microelectrodes : Part 2. Application to Rain and Sea Waters

Differential-pulse anodic stripping voltammetry at a mercury microelectrode is applied to determine labile and total zinc, cadmium, lead and copper in samples of rain and sea water. The low ohmic drop associated with microelectrodes permits reliable measurements in rain water without addition of supporting electrolyte. The values found in a typical sample were 0.95 μg l^?1 Cu, 0.38 μg l^?1 Pb, 0.01 μg l^?1 Cd and 0.95 μg l^?1 Zn, with relative standard deviations in the range 4–18%. The small effects of organic matter at microelectrodes, compared with those at a hanging mercury drop electrode, allow sensitive and reliable measurements of labile metals in surface sea water. Total metal concentrations are determined after acidification to pH 1.5 with hydrochloric acid. The results are compared with those obtained with atomic absorption spectrometry and with differential-pulse anodic stripping voltammetry at conventional mercury electrodes. Satisfactory results were obtained for a reference sea water.     

Trace determination of molybdenum by adsorptive cathodic stripping voltammetry

Molybdenum is determined by adsorptive cathodic stripping voltammetry in 0.15 M nitric acid solution containing 15 μM 2′,3,4′,5,7-pentahydroxyflavone (morin) as a ligand. In this medium, molybdenum is preconcentrated on a hanging mercury drop electrode and stripped cathodically in square-wave voltammetry mode, with a peak potential of -350 mV vs. Ag/AgCl (saturated KCl). The effect of various parameters (ligand concentration, supporting electrolyte composition, accumulation potential and collection time) on the sensitivity and linear range of the calibration curve are discussed. With controlled accumulation for 1 min, the detection limit (3σ) was 0.45 ng ml^?1 molybdenum and the calibration curve is linear up to 70 ng ml^?1. The procedure is applied to the determination of molybdenum in real samples with satisfactory results.     

Determination of chloramphenicol at ultra-trace levels by high-performance differential pulse polarography: Application to Milk and Meat

High-performance differential pulse polarography (h.p.d.p.p.) is used to determine the antibiotic chloramphenicol. Optimum operating conditions are discussed. Calibration curves are linear from 10 ng ml^-1 to 1 μg ml^-1; the detection limit is about 3 ng ml^-1. Above 1 μg ml^-1, deviations from linearity occur, because of adsorption of chloramphenicol at the mercury electrode. A correction, based on variations in natural drop time, is suggested. Chloramphenicol is readily extracted from milk or minced meat with diethyl ether. The ether is evaporated, and the residue is taken up in acetate buffer pH 4.7 and filtered through a membrane filter. Recoveries from samples fortified at levels of 10–1000 ng ml^-1 are about 60% for milk and 50% for minced meat.     

Stripping voltammetry of aluminum based on adsorptive accumulation of its solochrome violet RS complex at the static mercury drop electrode

A very sensitive electrochemical stripping procedure for aluminum is reported. Accumulation is achieved by controlled adsorption of the aluminum/solochrome violet RS complex on the static mercury drop electrode. Optimal experimental parameters include an accumulation potential of ?0.45 V, solochrome violet RS concentration of 1 × 10^?6 M, and a linear-scan stripping mode. The detection limit is 0.15 μg l^?1, the response is linear over the 0–30 μg l^?1 concentration range, and the relative standard deviation (at the 10 μg l^?1 level) is 2%. Most cations do not interfere in the determination of aluminum. The interference of iron(III) is eliminated by addition of ascorbic acid. Results are reported for snow samples.     

Selective Kinetic Spectrophotometric Determination of Nitrite in Food and Water

Abstract

A highly selective and sensitive method for the kinetic spectrophothometric determination of sub-microgram amounts of nitrite has been development based on its reaction with Nile blue 2B in acidic medium. The reaction is monitored spectrophotometrically at 595 nm at a fixed time of 4.5 min. The change in absorbance at 595 nm is related to the concentration of nitrite in the range 0.005 - 1.100 μg.ml^?1 The detection limit is 0.001 μg.ml^?1. The relation standard deviation is 1% for 0.020 μg.ml^?1 of nitrite for ten replicate measurements. Most common anions and cations do not interfere. The procedure was applied to the determination of trace amounts of nitrite in sausage and water.     

Determination of azinphos-methyl by adsorptive stripping voltammetry

A very sensitive electrochemical stripping procedure for azinphos-methyl (Guthion) is reported. Accumulation is achieved by adsorption of the compound on a hanging mercury drop electrode. The adsorptive stripping response was evaluated with respect to accumulation time and potential, concentration dependence, electrolyte and other variables. The determination limit is 0.2 ng ml^?1 after 300 s accumulation and 0.4 ng ml^?1 after 180 s accumulation. The procedure was applied to spiked river water.     

Fluorimetric assay of ergotamine

Studies on the fluorescence properties of ergotamine in water at various pH values, and in several organic solvents are described. An assay procedure for ergotamine, based on its intense fluorescence in ethanol, is presented. Extraction of ergotamine into benzene from basic aqueous solution is followed by transfer of the extract to ethanol for fluorescence determination. The plot of fluorescence intensity vs. concentration is linear up to 5 μg ml^?1, and the assay has a limit of detection of 0.002 μg ml^?1. Reproducibility data at the 2.5-μg ml^?1 level are given.     

Cyclic voltammetry of nucleic acids and determination of submicrogram quantities of deoxyribonucleic acids by adsorptive stripping voltammetry

In cyclic voltammetry (at a mercury drop electrode) guanine residues in the polynucleotide chain give a characteristic anodic peak at potentials close to ?0.3 V (vs. saturated calomel electrode). At low concentrations of polynucleotide, this peak can be enhanced substantially if the potential scan is preceded by adsorptive preconcentration of the polynucleotide at the hanging mercury drop electrode. With accumulation times shorter than 10 min at pH 6.8, the limit of detection of a single-stranded polynucleotide is < 0.1 μg ml^?1. The peak of double-helical deoxyribonucleic acid (DNA) is considerably lower than that of single-stranded DNA under the same conditions, which can be exploited to determine low concentrations of single-stranded DNA in the presence of double-stranded DNA.     

Differential-pulse anodic stripping voltammetry of mercury with gold-film micro-electrodes

Cylindrical gold film micro-electrodes are easily produced by plasma-sputtering of gold onto carbon fiber electrodes. The micro-electrodes produced were found to maintain their cylindrical geometry indefinitely, unlike gold wire electrodes of similar dimensions. Application of these electrodes in differential-pulse anodic stripping voltammetry provides a method for quantifying trace levels of mercury(II). Up to 100 μg l^?1 Hg(II) the area of the mercury stripping peak varied linearly with mercury concentration; the detection limit was 3.7 μg l^?1. With more than 100 μg l^?1 Hg(II) a new mercury stripping peak grows in at less positive potentials; its peak height is linear with Hg(II) concentration.     

Square‐Wave Adsorptive‐Stripping Voltammetric Detection in the Quality Control of Fluoxetine

ABSTRACT

A simple and sensitive extraction-spectrophotometric method for the determination of barium and potassium is reported. The 18C6-Barium-Orange II (18C6-Ba-(OR II)₂) and 18C6-Potassium-Orange II (18C6-K-OR II) ternary complexes are quantitatively extracted into dichloromethane and their absorbances are measured at 483 nm. Linear calibration graphs were obtained over the barium concentration range of 0.1-5 μg ml^?1 and potassium concentration range of 1-8 μg ml^?1. The relative standard deviation for 2.0 μg ml^?1 barium and pottasium are, respectively, 4.16% and 3.60%. The interfering effect of a large number of diverse ions on the determination of barium and potassium was studied. The method was applied to a synthetic sample with natural matrix effects of tap water and the results showed high potential of the recommended method for the determination of Ba and K in water samples.     

Determination of Molybdenum in Human Urine by Spectrophotometric Method using Thiazolylazo Compounds as Chromogenic Reagents

ABSTRACT

Four azo compounds based on diazotization of 2-aminobenzothiazole have been synthesized and characterized by elemental analysis as well as different spectroscopic techniques. The potentiality of the prepared compounds as new chromogenic reagents for the spectrophotometric determination of Mo⁶⁺ was studied by extensive investigation of optimum conditions favouring the formation of the coloured complexes. Beers law is obeyed in the concentration range 0.2-8.5 μg ml^?1 whereas Ringbom optimum concentration range was 0.8-7.5 μg ml^?1. The detection limit was 0.05 μg ml^?1. The molar absorptivity and Sandell sensitivity of the formed complexes are calculated. The effect of interfering ions on the determination of Mo⁶⁺ was investigated. The relative standard deviations for six replicate determinations of 5.0 μg ml^?1 of Mo⁶⁺ are 1.23, 1.47, 1.05 and 1.38 % using reagents I, II, III and IV, respectively. The proposed method has been applied to investigate the amount of Mo⁶⁺ in human urine samples. The molybdenum levels found between 0.5-2.1 μg/100 ml.     

Amperometric determination of formaldehyde via the hexacyanoferrate(III) -coupled dehydrogenase reaction

An enzymatic method with amperometric detection was developed for the determination of formaldehyde. Formaldehyde is first oxidized by reaction with NAD⁺ in the presence of formaldehyde dehydrogenase. The resulting NADH is then oxidized by hexacyanoferrate(III) in the presence of diaphorase to produce hexacyanoferrate(II). The anodic current generated by oxidation of the hexacyanoferrate(II) at the surface of a glassy carbon working electrode, held at a potential of 0.40 V vs. an Ag/AgCl reference electrode, is measured. The effects of solution conditions are examined and a linear relationship between rate of current change and formaldehyde concentration is obtained from 0.01 to 0.5 μg ml^?1 with a correlation coefficient of 0.9998. The relative standard deviation for the proposed method is 6.4% at 0.01 μg ml^?1 formaldehyde and 0.88% at 0.5 μg ml^?1.     

Utility of p-chloranilic Acid and 2,3 Dichloro-5,6-dicyano p-Benzoquinone (DDQ) for the Spectrophotometric Determination of Triamterene

Abstract

Two simple and sensitive spectrophotometric procedures are suggested for analysis of triamterene. The first procedure is based on the reaction of triamterene with p-chloranilic acid (p-CA) in methylene chloride to form a highly stable coloured product, exhibiting maximum absorbance at λ 530 nm. Beer's law is obeyed in the range of 40–220 μg.ml^?1 with a mean percentage accuracy of 99.98 ± 0.446. Limit of determination is 20 μg.ml^?1. In the second procedure, the drug is determined via charge transfer complex formation with 2,3 dichloro-5,6-dicyano p-benzoquinone (DDQ) using methylene chloride as a solvent. Here the reaction product has two well defined maxima at 460 nm and 530 nm where each has been utilized for quantitative determination. Beer's law is obeyed in concentration ranges of 25–125 μg.ml^?1 and 25–150 μg.ml^?1 with mean percentage accuracies of 99.92 ± 0.449 and 100.00 ± 0.511 for both maxima. 460 and 530 nm. respectively. Limit of determination is 12.5 μg.ml^?1 at both maxima. Optimum conditions for each procedure have been studied and the stoichiometry of both reactions was ascertained using Job's method of continuous variation. The validity of the suggested procedures was assessed by applying the standard addition technique using the drug capsules. Both procedures are statistically analyzed as compared with BP method for analysis of triamterene (non aqueous titration) revealing good accuracy and precision as indicated by t and F tests.     

Determination of caprolactam by adsorptive voltammetry after separation by thin-layer chromatography

Caprolactam (2-oxohexamethyleneimine) can be determined in wastewaters and natural waters by adsorptive stripping voltammetry after separation of the product of the reaction between caprolactam and p-(N,N-dimethylamino)benzene-p′-azobenzoyl chloride. When a hanging mercury drop electrode is used with an accumulation time of 60 s in stirred solution, caprolactam can be determined from a lower limit of 0.2 μg ml^?1. With a 360-s accumulation time, linear calibration plots are obtained for 8 × 10^?10?8 × 10^?9 mol l^?1 caprolactam. The effect of interfering sample components is eliminated by the TLC separation.     

Spectrophotometric determination of trace amounts of beryllium using 1,8-dihydroxyanthrone as a new chromogenic reagent

A simple, rapid, and sensitive spectrophotometric method for the trace level determination of beryllium based on the formation of a 1:2 complex with anthralin (1,8-dihydroxyanthrone) as a new reagent is developed. A spectrophotometric method was used to determine the acidity constant and stepwise proton dissociation of the reagent. The experimental conditions for determining beryllium including the influences of pH, reagent concentration and time were evaluated and optimized. Under the optimum experimental conditions, the molar absorptivity of the complex is 0.47 × 10⁴ l mol^?1 cm^?1 at 545 nm. Calibration graph was linear in the range of 0.04–1.04 μg ml^?1 with a detection limit of 0.012 μg ml^?1 and a %RSD of 0.43%, for 5 replicate determinations at 0.48 μg ml^?1 of Be(II). The interferring effect of some cations and anions was also studied. The method was applied for the determination of beryllium in beryl, silicate rock and alloys. Ethylenediaminetetraacetic acid (EDTA) was used for masking interfering ions.