In situ Coordination and Surface Morphology of Langmuir Films of Non－amphiphilic Dithizone with Metal Ions on Air／Water Interface

A spread Langmuir film on the air/water in-terface can serve as a basic model for the under-standing of organized molecular systems[1] .Gener-ally,it is considered that only those compoundsthat possess simultaneously a hydrophilic headgroup and a long- alkyl chain can be spread on theair/water interface[2— 4] .Therefore,researches onthe organized molecular films are mainly concernedwith typical amphiphiles.In order to expand thechoice in molecular film to form materials and omitthe tedious sy…     

Study on the mechanism and applications of the fluorescence reactions among cobalt (II), H(2)O(2) and two new derivatives of 8-sulfonamidoquinoline

The fluorescence intensities of the reaction systems of Co(II) with two new 8-sulfonamidoquinoline derivatives, 5-(4-Chlorophenylazo)-8-(benzenesulfonamido)-quinoline (CPBSQ), which was firstly synthesized and characterized, and 5-(3-fluo-4-chlorophenylazo)-8-(benzenesulfonamido)quinoline (FCPBSQ), could be enhanced by H(2)O(2). The mechanism and analytical characters of these reactions in the presence of H(2)O(2) were investigated in this paper. CPBSQ and FCPBSQ reacted with Co(II) in the presence of H(2)O(2) and in the basic medium forming a chelate, which exhibited an intensive fluorescence in ultraviolet region. The fluorescence intensities were proportional to the concentration of Co(II) over the range of 0.1-100 and 0.5-200 mug/l with the detection limits of 0.05 and 0.10 mug/l for the CPBSQ and FCPBSQ systems, respectively. A lot of metal ions included Cu(II) and Ni(II) did not interfere the determinations for both the systems. The methods, which are high sensitive and more selective, have been successfully applied to the determination of trace amount of cobalt in environmental and biological samples.     

Recognizing heterogeneous distribution of platinum group elements (PGE) in geological materials by means of the Re-Os isotope system

The identification of uncertainties caused by sample inhomogeneity, as distinct from those caused by sample preparation and measurement, is a challenging task. Use of chemometric methods to separate and estimate these contributions to the combined standard uncertainty of a measurement (uc) of an analytical result requires complex experiments. The difficulty of platinum group element measurement makes this task even more complex. But unless it can be demonstrated that sample inhomogeneity is the major contributor to the high variability of an analytical result one should be careful not to mistakenly attribute this to a nugget effect. In this contribution we are able to demonstrate in two special cases that irreproducible results (up to 90% RSD) for analysis of Os and Re in the pg g(-1) to ng g(-1) range are truly caused by a nugget effect and not by inadequacies of the analytical method.     

Chemical Analysis in Nanoreactors: Main Concepts and Applications

The types and characteristic properties of organized media, methods of control over their efficiency, the key terms used in this area, and analytical applications of organized media have been briefly considered. It has been shown that each type of organized systems, which are constituents of organized media, is a specific microphase having no macroscopic analogs. This microphase can be considered as a nanoreactor for various analytical reactions and processes.     

Relative affinity of 5-methoxypsoralen and 8-methoxypsoralen towards beta-cyclodextrin: a fluorescence, circular dichroism and chromatographic study

The relative affinity of 5-methoxypsoralen (5-MOP) and 8-methoxypsoralen (8-MOP) towards beta-cyclodextrin, a good model for the study of lipophilic interactions in biological systems and a potential drug carrier, has been investigated using spectroscopic and chromatographic methods. The fluorescence emission of 5-MOP in aqueous solution containing beta-cyclodextrin (10(-2) M) is found to be markedly blue shifted and enhanced by a factor of 6 whereas no significant changes are observed for 8-MOP. The existence of an induced circular dichroism is evidence for the formation of a 1:1 inclusion complex (association constant K = 400 +/- 50 M-1). Moreover, chromatographic results obtained with a beta-cyclodextrin linked stationary phase are consistent with our spectroscopic results and might have interesting analytical implications. These results clearly demonstrate that, in contrast to 8-MOP, 5-MOP exhibits a strong affinity for hydrophobic medium. Interesting pharmacological and analytical applications may result from the possible inclusion of psoralen derivatives into beta-cyclodextrin.     

Simultaneous ultrasound-assisted emulsification-derivatization as a simple and miniaturized sample preparation method for determination of nitrite in cosmetic samples by microvolume UV-vis spectrophotomety

A simple and miniaturized approach based on ultrasound-assisted emulsification-derivatization is proposed for the determination of nitrite in cosmetic samples by UV-vis micro-spectrophotometry. Oil/water emulsions were formed using 15 mg of cosmetic sample and 1 mL of an aqueous medium containing 0.5% w/v SDS and 1% v/v acetic acid. When powerful sonication systems were used to make emulsions, i.e. probe or cup-horn sonoreactor, stable and transparent emulsions were obtained in one or half minute per sample, respectively. The Griess reaction in these special conditions (i.e. sonication and the presence of an organized medium) was investigated. The absence of matrix effects allows external calibration with aqueous standards for nitrite quantification. Analytical features were compared to those of the European official method 82/434/EEC. Detection limit, sample throughput and reagent consumption were significantly improved.     

Gas Chromatographic Separation of Enantiomers it

Separation methods for the resolution of “optical isomers” (especially enantiomers) are developed to solve either of two basic problems: 1) the need to obtain, in optically pure form, one antipode or the other on a scale suitable for further chemical use-i.e.-“preparative” or 2) the analysis of the extent of racemization or “optical resolution” of a mixture of enantiomorphs on a scale sufficient for quantitative analysis-i.e.-“analytical”. The most economical, large-scale separation methods in use today are not chromatographic in nature but rather range from such common, general unit operations as recrystal1ization to very specific biological degradation.lS2 Chromatographic methods are generally limited to systems in which analytical data is the desired end product or in which only relatively small amounts of resolved material are needed.     

Automatic fitting procedures for EPR spectra of disordered systems: matrix diagonalization and perturbation methods applied to fluorocarbon radicals

Two types of automatic fitting procedures for EPR spectra of disordered systems have been developed, one based on matrix diagonalization of a general spin Hamiltonian, the other on 2nd order perturbation theory. The first program is based on a previous Fortran code complemented with a newly written interface in Java to provide user-friendly in and output. The second is intended for the special case of free radicals with several relatively weakly interacting nuclei, in which case the general method becomes slow. A least squares' fitting procedure utilizing analytical or numerical derivatives of the theoretically calculated spectrum with respect to the g- and hyperfine structure (hfs) tensors was used to refine those parameters in both cases. 'Rigid limit' ESR spectra from radicals in organic matrices and in polymers, previously studied experimentally at low temperature, were analyzed by both methods. Fluorocarbon anion radicals could be simulated, quite accurately with the exact method, whereas automatic fitting on, e.g. the c-C(4)F(8)(-) anion radical is only feasible with the 2nd order approximative treatment. Initial values for the (19)F hfs tensors estimated by DFT calculations were quite close to the final. For neutral radicals of the type XCF(2)CF(2)* the refinement of the hfs tensors by the exact method worked better than the approximate. The reasons are discussed. The ability of the fitting procedures to recover the correct magnetic parameters of disordered systems was investigated by fittings to synthetic spectra with known hfs tensors. The exact and the approximate methods are concluded to be complementary, one being general, but limited to relatively small systems, the other being a special treatment, suited for S=1/2 systems with several moderately large hfs.     

The effect of solvent and matrix combinations on the analysis of bacteria by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

The ability to rapidly identify the taxonomic class of the wide variety of microorganisms involved in human and animal disease is becoming increasingly important, especially with the increasing development of resistance to the antibiotics which form the main defence against them. A number of groups have recognised the utility of matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry MALDI-TOF in the analysis of these microorganisms. However, no consistent methodology has been developed which is in general use. In particular the use of different solvent extraction systems and mass spectrometric matrices can have significant effects on the quality of the data obtained. We have now studied a number of the commonly used matrices and a range of solvent systems of widely varying polarity in an attempt to devise an optimum analytical strategy for the rapid characterisation of these organisms by MALDI-TOFMS. The E. coli ATCC 9637 organisms were initially washed to remove growth medium contaminants, followed by extraction with one of a range of solvents prior to admixing with a number of different single matrices or binary and ternary combinations of these matrices. The results obtained indicate that a binary combination of 2-(4-hydroxyphenylazo)benzoic acid and 2-mercaptobenzothiazole (1:1) as matrix provides the best data after the proteinaceous material from the organism cell surface was extracted with 17% formic acid, 33% isopropyl alcohol and 50% water, (solvent 2 in this work).     

Performance of three pneumatic probe samplers and four analytical methods used to estimate aflatoxins in bulk cottonseed

The requirement by the U.S. Food and Drug Administration that agricultural products susceptible to aflatoxin contamination contain aflatoxin at levels < or =20 parts per billion for consumer-ready products has led to the establishment of inspection programs by various industries. In Arizona, cottonseed samples from 100 ton piles are collected by an accumulation of 3 or more probings with a pneumatic probe. When sampling compacted cottonseed piles, the large official pneumatic probe (7.6 x 127 cm) decreases in efficiency. Two smaller probes (1.9 x 127 cm and 1.9 x 254 cm ) were therefore developed and tested for their suitability for sampling cottonseed piles. Three rapid analytical methods (one thin-layer chromatographic and 2 immunochemical) were tested for suitability as on-site assay systems. An analysis of variance of the analytical test results showed no differences between the various probes tested. Of the rapid methods, however, only the AflaTest-P immunoaffinity column gave results similar to those of the official AOAC thin-layer chromatography method. In terms of safety, however, all methods prevent material contaminated above regulatory limits from reaching the consumer.     

Flow injection chemiluminescence determination of hydrazine by oxidation with chlorinated isocyanurates

A rapid and sensitive flow injection chemiluminescence (CL) method is described for the determination of hydrazine based on the CL generated during its reaction with either sodium dichloroisocyanurate (SDCC) or trichloroisocyanuric acid (TCCA) in alkaline medium. The emission intensity is greatly enhanced if dichlorofluorescein (DCF) as sensitizer is present in the reaction medium. The presence of citrate prevents the precipitation of some cations in the reaction medium and also causes an enhancement in emission intensity. The effect of analytical and flow injection variables on these CL systems and determination of hydrazine are discussed. The optimum parameters for the determination of hydrazine were studied and were found to be the following: SDCC and TCCA both 1x10(-3) M; NaOH, 2x10(-1) M; DCF, 5x10(-6) M; citrate, 1x10(-3) M and flow rate, 3.8 ml min(-1). The optimized method yielded 3sigma detection limits of 2x10(-7) and 3x10(-7) M for hydrazine with SDCC and TCCA oxidants, respectively. The method is simple, fast, sensitive, and precise and was applied to the determination of hydrazine in water samples.     

Use of multiple headspace solid-phase microextraction and pervaporation for the determination of off-flavours in wine

The occurrence of off-flavours in wines and especially the so-called "cork taint defect" represents one of the most serious problem in wine industry in which 2,4,6-trichloroanisole has been blamed as the main responsible. The development of analytical methods for haloanisoles determination in wine/cork represent a challenge, mainly due to food matrix complexity and low taste and odour (T&O) threshold levels which are generally beyond the sensitivity of the analytical systems. In this work, a method based on the combined use of the recently developed multiple headspace solid-phase microextraction (MHS-SPME) and gas chromatography-ion-trap mass spectrometry has been optimised for the determination of haloanisoles in wines. This powerful analytical methodology is compared with several analytical approaches based on pervaporation, an innovative membrane-based technique similar to dynamic headspace. Analytical features of the methods assayed reveal their suitability for the appraisal of haloanisoles in this matrix in which threshold odor concentrations are in the range 4-40 ng l(-1). The analytical approaches have been applied to the analysis of haloanisoles in different Spanish white and red wines, in which spiking experiments showed good recoveries for the methodologies assayed.     

Spectrophotometric determination of the pseudohalide 1,2,3,4-thiatriazol-5-thiolate ion, CS(2)N(-)(3)

A critical study of the analytical methods available for the CS(2)N(-)(3) ion is reported. A modification of the argentimetric method is proposed. An oxidative study gave evidence of various steps corresponding to incompletely oxidized intermediates. The absorption maximum of the 1,2,3,4-thiatriazol-5-thiolate ion at 313 nm, with molar absorptivity of 7.4 x 10(-3)1.mole(-1).cm(-1) is utilized to develop a new analytical method. The spectrophotometric procedure is rapid and free from interference by many ions. A value of 1.51 +/- 0.02 was found for pK of HCS(2)N(3) at an ionic strength of 1.00M and at 25 degrees . The spectrum of CS(2)N(-)(3) is changed by increasing acidity of the medium, due to the formation of HCS(2)N(3); an isosbestic point is observed at 251 nm.     

Beiträge zu kinetisch-katalytischen analysenmethoden unter verwendung offener systeme

Three basic possibilities for the application of “open systems” in catalytic-kinetic analytical methods are discussed: steady-state, stat and continuous-flow methods. Two further possibilities for such methods are reported: (1) the simultaneous addition of one reactant and the catalyst at constant speed; (2) the simultaneous addition of one reactant and the catalyst at a speed, regulated by the system itself, necessary to keep constant a preset potential or absorbance. Some examples of both methods are described.     

PHOTOSENSITIZERS IN ORGANIZED MEDIA: SINGLET OXYGEN PRODUCTION AND SPECTRAL PROPERTIES

Abstract— Measurement of singlet oxygen production by porphyrin-type photosensitizers in simple buffer solutions show that TPPS is more efficient than PII (Photofrin II) or than hematoporphyrin. This behavior was observed using three independent analytical detection methods for ¹O₂: RNO bleaching, tryptophan degradation, and oxygen consumption. Similar results were obtained when irradiating with a classical light source or with a pulsed dye laser. Addition of EPC liposomes to the buffer solution caused a decrease of efficiency for TPPS and an increase for PII. Addition of BSA shows the same relative pattern: a small increase of efficiency for TPPS and a tenfold increase for PII. These changes can be ascribed to specific interactions between the sensitizer molecules and the organized medium. Since changes in the fluorescence properties are also due to interactions with the medium, we monitored the emission of the sensitizers as a function of the environment. The fluorescence peak positions (at 648, 705 nm for TPPS and at 615, 677 nm for PII) were all red shifted. The intensities show an increase, particularly for PII in liposomes, due to a marked change in the microviscosity.     

Acoustofluidics 13: Analysis of acoustic streaming by perturbation methods

In this Part 13 of the tutorial series "Acoustofluidics--exploiting ultrasonic standing waves forces and acoustic streaming in microfluidic systems for cell and particle manipulation," the streaming phenomenon is presented from an analytical standpoint, and perturbation methods are developed for analyzing such flows. Acoustic streaming is the phenomenon that takes place when a steady flow field is generated by the absorption of an oscillatory field. This can happen either by attenuation (quartz wind) or by interaction with a boundary. The latter type of streaming can also be generated by an oscillating solid in an otherwise still fluid medium or vibrating enclosure of a fluid body. While we address the first kind of streaming, our focus is largely on the second kind from a practical standpoint for application to microfluidic systems. In this Focus article, we limit the analysis to one- and two-dimensional problems in order to understand the analytical techniques with examples that most-easily illustrate the streaming phenomenon.     

Analytical applications of poly(3-methylthiophene)-coated cylindrical carbon fiber microelectrodes

Some analytical applications of carbon fiber microelectrodes (CFMEs) modified with cyclic voltammetric electrogenerated poly(3-methylthiophene) (P3MT) coatings are described. Cyclic voltammograms in aqueous solutions of the phenolic antioxidants tert-butylhydroxyanisole (BHA), tert-butylhydroquinone (TBHQ), propylgallate (PG), and tert-butylhydroxytoluene (BHT) showed that electrocatalytic effects and an improved electrode kinetics occurred at the modified microelectrodes when compared with GC electrodes of conventional size. Moreover, reproducible voltammograms were obtained, obviating the need of cleaning or pretreatment of the coated microelectrode. Another important analytical advantage was the greatly improved resolution for mixtures of analytes. The behavior of P3MT-CFMEs in organized media was tested by considering their voltammetric response towards the electrochemical oxidation of PG. The nonionic surfactant Pluronic F 68 was selected as the most suitable to form micellar solutions of PG, as well as the emulsifying agent for the preparation of oil-in-water emulsions. A 20:80 ethyl acetate:n-hexane mixture was used as the organic phase and a 0.05 mol L⁻¹ H₃PO₄/H₂PO₄⁻ buffer solution of pH 2.0 as the aqueous continuous phase. Cyclic voltammetry demonstrated that the PG oxidation current was purely diffusion-controlled in the organized medium. The analytical characteristics obtained by using differential pulse voltammetry were slightly better than those obtained in aqueous solution. Furthermore, the improved resolution for mixtures of analytes is retained in the oil-in-water emulsified medium. The proposed method was applied with good results to the determination of PG in spiked commercial dehydrated soup samples by direct emulsification of aliquots of the sample extract in the ethyl acetate:n-hexane mixture.