Nonionic micellar liquid chromatography coupled to immobilized enzyme reactors

Immobilized enzyme reactors are used as post-column reactors to modify the detectability of analytes. An immobilized amino acid oxidase reactor was prepared and coupled to an immobilized peroxidase reactor to detect low level of amino acids by fluorescence of the homovanilic dimer produced. A cholesterol oxidase reactor was prepared to detect cholesterol and metabolites by 241 nm UV absorbance of the enone produced. The preparation of the porous glass beads with the immobilized enzymes is described. Micellar liquid chromatography is used with non-ionic micellar phases to separate the amino acids or cholesterol derivatives. It is demonstrated that the non ionic Brij 35 micellar phases are very gentle for the enzyme activity allowing the reactor activity to remain at a higher level and for a much longer time than with hydro-organic classical chromatographic mobile phases or aqueous buffers. The coupling of nonionic micellar phases with enzymatic detection gave limits of detection of 32 pmol (4.8 ng injected) of methionine and 50 pmol (19 ng injected) of 20alpha-hydroxy cholesterol. The immobilized enzyme reactors could be used continuously for a week without losing their activity. It is shown that the low efficiency obtained with micellar liquid chromatography is compensated by the possibility offered by the technique to easily adjust selectivity.     

High-performance liquid chromatography of hydroxysteroids detected with post-column immobilized enzyme reactors

Assaying the low concentrations of steroid hormones in extracts of body fluids requires detectors that are both highly sensitive to the steroid and relatively insensitive to interfering compounds usually present in much higher concentrations. To explore the use of moderately specific enzymes in post-column reactors, we immobilized 3 alpha- and beta-hydroxysteroid dehydrogenase on controlled pore glass beads, 37 microns in diameter, and constructed 4.6-mm diameter reactor columns, 3-cm long, packed with one of the two kinds of these beads. Hydroxysteroids eluted from the analytical column were mixed with the coenzyme, nicotinamide adenine dinucleotide (NAD), before passing through the reactor. The effluent from the reactor was passed through the 70-microliters flow cell of a fluorometer in which the fluorescence of the NADH produced in the enzyme-catalyzed oxidation of the hydroxysteroid was monitored. At the conventional high-performance liquid chromatography flow-rates used, oxidation of the steroids was almost complete. The yield depended on both the residence time of steroids in the reactor column and the concentration of organic modifier in the reaction mixture. Maximal yield was obtained with buffer having a low organic solvent concentration and passing through the reactor slowly. In assays of mixtures of epimeric hydroxysteroids, the 3 alpha-hydroxysteroids were detected with the 3 alpha-hydroxysteroid dehydrogenase reactor; the beta-hydroxysteroids were not, confirming the specificity of the enzymatic detection. With the fluorometer used, picomole quantities of steroids could easily be distinguished from noise.     

Specific detection of nicotinamide coenzymes by liquid chromatography and amperometric detection with immobilized glucose-6-phosphate dehydrogenase

A liquid chromatographic system for the specific and simultaneous detection of nicotinamide coenzymes is constructed by combining an immobilized glucose-6-phosphate dehydrogenase reactor with an amperometric system based on a phenazine methosulphate-mediated reaction, after separation on a reversed-phase column. The calibration graphs are linear from 0.05 to 20 nmol for all four coenzymes. The detection limits are 3.2, 5.2, 7.9 and 9.4 pmol for NADP⁺, NADPH, NAD⁺ and NADH, respectively. The enzyme reactor retains most of its original activity after repeated use for 2 months.     

Voltammetric/amperometric detection for liquid chromatography

A voltammetric/amperometric detector based on a dual-electrode electrochemical detector is described for liquid chromatography. The detector combines the advantages of both voltammetric and amperometric detection. A three-dimensional data array of current response as a function of both time (chromatographic domain) and potential (electrochemical domain) is obtained. From the chromatographic point of view, this allows post-experimental choice of the optimal detection potential. Different detection potentials can even be chosen for each chromatographic peak. Having the voltammetric data as well as the chromatographic data provides ready identification of chromatographically unresolved compounds and the ability to resolve such co-eluting compounds voltammetrically. The voltammetric data also provide a second method of peak identification for greater certainty in peak assignments. Voltammetric detection limits of less than 10 pmol of material injected on the column were achieved with this detection method. From the electrochemical perspective, voltammetric/amperometric detection provides a technique for obtaining hydrodynamic voltammograms with small amounts or small volumes of sample. Voltammograms can also be obtained for the individual components of complex mixtures without the need for isolation steps.     

Miniaturization of solid-phase reactors for on-line post-column derivatization in narrow-bore liquid chromatography

Summary The use of solid-phase reactors for post-column derivatization in narrow-bore HPLC (1.0mm i.d. analytical columns) is evaluated. Two systems are described, viz. for the determination of N-methylcarbamate pesticides and for that of urea and ammonia. The solid-phase reactor is packed with a strong anion exchange resin and urease immobilized on silica, respectively, to effect the catalytic hydrolysis of the solutes eluting from the analytical column. In both systems, the hydrolysis product is reacted with o-phthalaldehyde followed by fluorescence monitoring. Analytical data are presented and band broadening from various parts of the reaction detector system is discussed. An on-line trace enrichment procedure via a micro precolumn is descried for the trace level determination of N-methylcaramates in surface water samples.     

High performance liquid chromatography of biological polyamines using immobilized enzyme as post-column reactor followed by electrochemical detection

A novel analytical method for biological polyamines (putrescine, spermidine and spermine) was developed. Polyamines were separated by ion-pair reversed phase chromatography using a polymer-based octadecyl bonded column. A polyamine oxidase immobilized column worked effectively as a post-column reactor to convert polyamines to hydrogen peroxide which was eventually detected by electrochemical oxidation on platinum electrode. This method required neither tedious derivatization nor gradient elution, permitting us to perform simple and rapid analysis of polyamines. The detection limits were 0.3, 0.6, and 4 pmol injected for putrescine, spermidine, and spermine, respectively with a linear range of two to three orders of magnitude. Chromatograms obtained with samples from human urine and rat brain homogenates demonstrated the high sensitivity and selectivity of the method.     

Pulsed amperometric detection of sulfur-containing pesticides in reversed-phase liquid chromatography

Pulsed amperometric detection at a gold electrode is demonstrated for the separation of eight sulphur-containing pesticides on a C-18 reversed-phase column with 50% (v/v) acetonitrile in acetate buffer (pH 5.0) as the mobile phase. Detection was based on a two-step potential waveform with adsorption of the analyte during cathodic polarization and subsequent amperometric detection catalyzed by oxide formation following anodic polarization. The mechanism of the anodic detection involves prior adsorption of the sulfur compounds. Hence, the shape of the calibration curve is strongly influenced by the adsorption isotherm of the analyte and, therefore, deviates from linearity at high concentrations. Detection limits below 100 ng ml^?1 in 20-μl samples (e.g., 0.8 ng of dimethoate) were obtained by using preconcentration from a larger sample onto a C-18 fore column prior to injection into the separation column.     

New analytical possibilities of amperometric detection in high-performance liquid chromatography

It is demonstrated that sugars can be determined with high sensitivity by high-performance liquid chromatography (HPLC) with amperometric detection using domestic instruments. Optimal conditions of the detection of catecholamines were selected; obtained detection limits provide the determination of these compounds in biological fluids. Conditions of the simultaneous separation of most familiar narcotics by HPLC on one column with high precision and low detection limit were optimized. Presented at the V All-Russian Conference with the Participation of CIS Countries on Electrochemical Methods of Analysis (EMA-99), Moscow, December 6–8, 1999.     

Measurement of thiols in human plasma using liquid chromatography with precolumn derivatization and fluorescence detection

A liquid chromatography (LC) method for the simultaneous measurement of the main low molecular mass thiols (i.e., cysteine, cysteinylglycine, homocysteine, and glutathione) in human plasma is described. The sample treatment consists of the reduction of disulfide bounds with tri-n-butylphosphine and protein precipitation with trichloroacetic acid followed by precolumn derivatization with a thiol-selective fluorogenic reagent (7-fluoro-2,1,3-benzoxadiazole-4-sulfonamide). The structure of thiol derivatives is assessed using electrospray ionization-mass spectrometry (MS). The stability of resulting adducts in acidic medium (24 h at 10 degrees C) allows the automation of the technique and a high throughput of samples (approximately 50 per day). Separation is complete within 12 min using isocratic reversed-phase mode, and detection is operated by spectrofluorimetry (lambda ex = 385 nm and lambda em = 515 nm). Quantitation is performed by an internal standardization mode using thioglycolic acid. The LC method is fully validated, and homocysteine concentrations obtained in plasma samples are compared with values measured using either fluorescence polarization immunoassay or capillary gas chromatography-MS; a good correlation is observed between LC and both methods. The method has been applied in daily use to a large-scale study in a human healthy population, and some resulting data are discussed.     

Post-column oxidative derivatization for the liquid chromatographic determination of phenothiazines

A first post-column chemical derivatization method for the liquid chromatographic determination of phenothiazines is presented. Peroxyacetic acid is introduced as a derivatizing agent for phenothiazines, yielding the colored radical cations or fluorescent sulfoxides, depending on reaction conditions. Both reaction products were successfully employed for the detection of the phenothiazines after their liquid chromatographic separation. The fluorescence spectroscopic detection of the sulfoxides proved to be the more robust and sensitive method. Limits of detection ranged from 4 nM for triflupromazine and trimeprazine to 300 nM for phenothiazine for the fluorescence spectroscopic detection of the sulfoxide and from 0.3 μM for phenothiazine and triflupromazine to 2 μM for trifluperazine for the UV–Vis spectroscopic detection of the radical cation. The calibration functions for the fluorimetric sulfoxide determination ranged from two to more than three decades, starting at the limit of quantification.     

Determination of purine nucleosides and their bases by high-performance liquid chromatography using co-immobilized enzyme reactors

A selective and sensitive assay of inosine, guanosine, hypoxanthine, guanine and xanthine by high-performance liquid chromatography with immobilized enzyme reactors was developed. The separation was achieved on a Capcell Pak C18 column (15 cm x 0.46 cm I.D.) with a mobile phase of 0.1 M phosphate buffer (pH 8.0) containing 7 mM sodium 1-hexanesulphonate and 0.1 mM p-hydroxyphenylacetic acid. The fluorimetric detection of hydrogen peroxide using immobilized peroxidase and p-hydroxyphenylacetic acid was applied to the assay of these compounds, which were oxidized to yield hydrogen peroxide in the presence of immobilized enzyme (purine nucleoside phosphorylase, guanase and xanthine oxidase). Enzyme reactions occurred sufficiently without post-column addition of reagents. Enzymes that catalysed the conversion of purine compounds were co-immobilized on aminopropyl controlled-pore glass packed in stainless-steel tubing. The detection limits were 30-200 pg per injection.     

Post-column derivatization capillary electrochromatography for detection of biogenic amines in tuna-meat

A system to perform post-column derivatization capillary electrochromatography (CEC) was developed for the first time. The system mainly included a 4-microm (O.D.) silica packed column (200 mm effective length x 0.1 mm inner diameter I.D.) with micro-magnetic particles (MMPs) frits, a T-junction connector, an in-line fluorescence detector and a high-voltage power supply. The system was evaluated by using histamine (HA) as a standard biogenic amine for this study. A 5 microM HA solution was loaded at the anodic site of the capillary column by applying 3 kV for 5s. Then, HA was electrophoretically eluted with a 20mM phosphate buffer (pH 7) by applying 3 kV, and was derivatized with 3mM o-phthalaldehyde (OPA)/N-acetylcysteine (NAC) in 100 mM borate (pH 10), which was continuously delivered through the reagent-loading capillary tube by gravity into the T-junction connector. HA derivative was finally detected with the in-line fluorescence detector (lambda(Ex)=340 nm, lambda(Em)=450 nm) at 9.7 min after sample loading. To test the utility of this system, it was next employed for its ability to detect the presence of HA and other kinds of biogenic amines, including cadaverine (Cad), spermidine (Spm) and tyramine (Tyr) in tuna-meat, once the validity of the method had been confirmed.     

Determination of polycyclic aromatic hydrocarbons in water samples using high-performance liquid chromatography with amperometric detection

The determination of polycyclic aromatic hydrocarbons (PAHs) using high-performance liquid chromatography (HPLC) with UV and fluorescence detection has been well established. Although most of the PAHs can be detected by these methods, some environmentally important polyaromatic compounds, such as acenaphthylene, do not show fluorescence and can only be determined by UV detection at higher concentrations. A sensitive and selective determination of acenaphthylene, acenaphthene and the six PAHs listed in the TVO, the German drinking water standard, is also possible by amperometric detection following HPLC separation. The method was applied to the determination of PAHs in different water samples after solid-phase extraction (SPE). The efficiency of the amperometric determination was found to be superior to UV detection (λ = 300 nm).     

On-line redox derivatization liquid chromatography using double separation columns and one derivatization unit

A new on-line redox derivatization technique using double separation columns and one redox derivatization unit was presented for enhancement of separation selectivity of HPLC. This on-line redox derivatization HPLC system consisted of two separation columns and one redox derivatization unit placed between them. The redox reaction proceeds in the derivatization unit so that an analyte compound migrates as its original form in the first column, while as its oxidized or reduced form in the second column. The retention of the analytes is controlled by the lengths of the two separation columns in this system. We adopted a small column packed with porous graphitic carbon (PGC) as a redox derivatization unit and two C18 silica columns treated with hexadecyltrimethylammonium chloride as separation columns. The redox activity of PGC and the efficiency of the on-line redox derivatization HPLC system for enhancement of separation selectivity were investigated using EDTA complexes of some metal ions. Original untreated PGC and PGC treated with hydrogen peroxide completely oxidized Co(II)-EDTA and converted it to Co(III)-EDTA, while the other metal complexes eluted as their original oxidation states throughout the system. Selective separation and determination of cobalt in a reference copper alloy by the developed method were demonstrated.