A spectral study of transition-metal complexes on a chelating ion-exchange resin containing aminophosphonic acid groups

The coordination mode of a commercial chelating ion-exchange resin, ES 467, containing aminomethylphosphonic acid groups anchored on a macroporous styrenedivinylbenzene copolymer, with several metal ions, such as chromium(III), cobalt(II), nickel(II), copper(II) and zinc(II) has been studied with the aid of IR, ligand field and ESR spectra. The chelating group of ES 467, aminomethylphosphonic acid, appears to bind different metal ions mainly through oxygen atoms of the phosphonic acid group, though, in the case of those species containing low-loading of metal ions, the secondary amine nitrogen atom also appears to take part in coordination. Most of the metal ions studied seem to be present as six-coordinated species in the polymeric matrix, whereas cobalt(II) species show electronic spectra which are consistent with the presence of both four-coordinated (tetrahedral) and six-coordinated (octahedral) structures of these species. The distribution coefficients for cobalt(II), nickel(II), copper(II) and zinc(II) have been determined and it appears that the resin ES 467 binds copper(II) ions selectively. An attempt has been made to find a possible relationship between the selectivity of the chelating resin and the stereochemistry of the adsorbed metal ions.     

Separation of platinum and palladium from base metals with a weakly basic cellulose ion exchanger

Platinum(IV) and palladium (II) are strongly adsorbed on the weakly basic cellulose ion exchanger DEAE from dilute thiocyanate media, while most other metal ions do not show any marked tendency to adsorb from the same media. It is possible to separate and concentrate the noble metal ions from a large quantity of base metals such as iron, cobalt, nickel, copper, zinc and lead. As little as 1 mg of platinum(IV) and/or palladium (II) can be quantitatively separated from as much as 20–25 g of base metals on a small column of DEAE (thiocyanate form). The noble metal ions adsorbed are easily stripped from DEAE.     

Express Voltammetric Control of Permanganate Ions in Process Solutions from Zinc Production

Express voltammetric analysis of zinc sulfate solutions for manganese(VII) ions was developed. The influence of the components of the supporting electrolyte on the measurement sensitivity and selectivity was studied. The method is intended for automated control of the permanganate treatment of the zinc electrolyte to remove cobalt(II) ions.     

Voltammetric Determination of Cobalt(II) in Zinc Sulfate Solution

A method for automated polarographic analysis for Co(II) ions in technological solutions of zinc production was developed. The influence exerted by the components of a supporting electrolyte on the sensitivity and selectivity of measurements was studied. The method is intended for determining the content of cobalt(II) in purification of a zinc sulfate solution to remove impurities and for ecological monitoring of wastewater produced at nonferrous metallurgy plants.     

Structural, MALDI-TOF-MS, magnetic and spectroscopic studies of new dinuclear copper(II), cobalt(II) and zinc(II) complexes containing a biomimicking μ-OH bridge

The Py(2)N(4)S(2) octadentate coordinating ligand afforded dinuclear cobalt, copper and zinc complexes and the corresponding mixed metal compounds. The overall geometry and bonding modes have been deduced on the basis of elemental analysis data, MALDI-TOF-MS, IR, UV-vis and EPR spectroscopies, single-crystal X-Ray diffraction, conductivity and magnetic susceptibility measurements. In the copper and zinc complexes, a μ-hydroxo bridge links the two metal ions. In both cases, the coordination geometry is distorted octahedral. Magnetic and EPR data reveal weakly antiferromagnetic high spin Co(II) ions, compatible with a dinuclear structure. The magnetic characterization of the dinuclear Cu(II) compound indicates a ferromagnetically coupled dimer with weak antiferromagnetic intermolecular interactions. The intra-dimer ferromagnetic behaviour was unexpected for a Cu(II) dimer with such μ-hydroxo bridging topology. We discuss the influence on the magnetic properties of non-covalent interactions between the bridging moiety and the lattice free water molecules.     

Mixed-ligand complexes of zinc(II), cobalt(II) and cadmium(II) with sulfur, nitrogen and oxygen ligands. Analysis of the solid state structure and solution behavior. Implications for metal ion substitution in alcohol dehydrogenase

In this paper we characterize new, mixed ligand complexes of zinc(II), cobalt(II) and cadmium(II) with tri-tert-butoxysilanethiolate and 2-(2′-hydroxyethyl)pyridine ligands. Due to the chelating versus non-chelating behavior of 2-(2′-hydroxyethyl)pyridine ligand we have obtained an interesting structural variety in the studied system. The presented coordination patterns together with the results of NMR studies have been used to illustrate a rapid chemical exchange undergoing in methanolic solutions of zinc(II) and cadmium(II) complexes. UV-Vis spectra of cobalt(II) species have also evidenced an exchange in the case of cobalt(II) complex. The relative strength of hydrogen bond formed by hydroxyl group bonded to Zn(II), Co(II) or Cd(II) was evaluated by analysis of structural parameters and position of the OH stretching vibrations in the FT-IR spectra of the complexes in solid state. The data were compared with the activity of zinc (native) alcohol dehydrogenase and alcohol dehydrogenase substituted with cobalt and cadmium ions. The enthalpies of proton abstraction in zinc and cobalt complexes were calculated and found to be very similar. The attempt to apply zinc tri-tert-butoxysilanethiolate as a catalyst in the biomimetic reaction of reduction of N-benzylnicotinamide chloride by ethanol was unsuccessful.     

Voltammetric Behaviour of Nickel in the presence of cobalt and zinc ions and surfactants

The reduction of the nickel dimethyldioxime complex at mercury electrodes is investigated in the presence of electrochemically interfering ions (Co²⁺, Zn²⁺). In addition the influence of various surfactants on the reduction process was studied by differential pulse adsorptive stripping voltammetry. An improvement of the selectivity without a loss of sensitivity was achieved for the trace determination of nickel in the presence of cobalt by the use of an in-situ modification of the mercury electrode with adsorbed tetrabutylammonium. It is shown that a 10⁶-fold excess of zinc does not distrub the nickel signal in the presence of a sufficient amount of ammonia in the supporting electrolyte.     

Adsorption of mercury(II) on macroreticular styrene-divinylbenzene copolymer beads

The adsorption characteristics of mercury(II) on several kinds of styrene-divinylbenzene copolymer beads having different surface properties were studied. It was found that the polymer beads selectively adsorbed mercury(II) from solutions over a wide range of pH with high efficiency. The amount of mercury(II) adsorbed increased with increase in specific surface area of the polymer beads and the adsorption behaviour was found to be of the Langmuir type. The presence of chloride strongly reduced the adsorption, but this interference was not observed with nitrate, sulphate, perchlorate, cadmium(II), cobalt(II), copper(II), nickel(II), silver(I) and zinc(II). More than 95% of the mercury(II) adsorbed on a column of polymer beads could be recovered with dilute hydrochloric acid.     

Chelate von β-dicarbonylverbindungen und ihren derivaten: Teil XLVII. Dünnschichtchromatographisches verhalten von metallchelaten mit thiodibenzoylmethan und acetylthioacetaniliden

The thin-layer chromatographic behaviour of thiodibenzoylmethane chelates with cobalt(III), zinc(II), mercury(II), palladium(II), platinum(II) and rhodium(III), and also of acetylthioacetanilide chelates with cobalt(III), nickel(II), zinc(II) and cadmium(II) on alumina is described. Different binary mixtures of eluents are used. The influence of solvent parameters and of the layer material, possible separations and the influence of substituents in the acetylthioacetanilides are discussed.     

8-Quinolinol-5-sulfonic acid-loaded resin as a preconcentrating agent in the neutron activation analysis of the chalcophile elements (author's transl)]

A chelating agent-loaded resin consisting of 8-quinolinol-5-sulfonic acid and an anion-exchange resin (HOx-resin) was prepared in order to concentrate trace chalcophile elements in natural water samples selectively before neutron activation analysis. The exchange capacity of the Diaion SA No. 100 for the reagent (1.8 meq . g-1 resin) corresponds approximately to that for chloride ion (1.83 meq . g-1 resin), indicating that 8-quinolinol-5-sulfonic acid is adsorbed quantitatively on the exchange site of the resin through the sulfonate anion in the reagent. The basic conditions for the adsorption of the metal ions on the resin were investigated by employing the column method. The nitrate concentration and the pH of the sample solution affect the adsorption behavior of metal ions. Several solutions containing metal ions with varying pH or varying nitrate concentration were applied to the resin column (35 mm x 7 mm phi) with a flow rate of 2.0 cm3 . min-1. As a result, the optimum conditions for the quantitative adsorption of copper(II), zinc(II), cadmium(II), cobalt(II), nickel(II) and manganese(II) were as follows: NO3- less than 0.01 mol . dm-3 pH greater than 4.6. Furthermore, the feasibility of the above conditions as well as quantitative adsorption of the chalcophile elements was confirmed through the neutron activation analysis of the synthesized metal solutions.     

Adsorption of metal ions on crosslinked poly(4-vinylpyridine) resins prepared with a metal ion as template

Poly(4-vinylpyridine) (PVP) was crosslinked with 1,4-dibromobutane with a metal ion as template. The adsorption behavior of copper, cobalt, zinc, and cadmium ions on the obtained resin (DBQP) was studied. The DBQP resin prepared with a metal ion as template preferentially adsorbed the metal ion used as template. The stability constant of the copper complex of DBQP was largest for the DBQP resin prepared with a copper ion as template, which was due to its large entropy change for the complexation.     

486—Polarographic study of zinc bound to alcohol dehydrogenase

The differential pulse polarogram of native liver alcohol dehydrogenase consists of two peaks which correspond to the reduction of zinc associated with the enzyme. On the basis of its electrochemical properties peak I (with peak potential at ? 1.0 V) was attributed to the signal of zinc ions liberated from the enzyme adsorbed at the electrode surface. Peak II (with peak potential at ? 1.1 V) probably corresponds to the reduction of zinc still bound to the enzyme molecules adsorbed at the electrode surface. The possible difference between the contributions of catalytic and structural zinc of liver alcohol dehydrogenase to the observed currents is discussed. The polarographic behaviour of the enzyme of animal origin is compared with that of yeast alcohol dehydrogenase which yields only one peak at ? 1.0 V.The denatured alcohol dehydrogenases give a single signal at ?1.0 V which corresponds to the zinc liberated from the enzymes in the solution. The direct denaturation of liver alcohol dehydrogenase in the polarographic cell provides a quick and simple method for determination of the zinc content of the enzyme. In addition, the normal pulse polarograms of native and denatured liver alcohol dehydrogenase show considerable differences.     

Ion-selective chalcogenide electrodes for a number of cations

Ion-selective chalcogenide disc electrodes have been developed which are responsive to cations such as silver, lead, chromium(III), nickel, cobalt(II), cadmium, zinc, copper(II) and manganese(II) ions. Each was prepared by using the corresponding metal chalcogenide with silver sulphide. An electrode was assembled with both a compacted and a sintered disc. The sintered electrodes were more sensitive and stable than the compacted ones. Response to silver ion was 59.5 mV pAg , to lead, nickel, cadmium, zinc and copper(II) 29.5 mV pM and to chromium(III) 20 mV pM . Cobalt(II) and manganese(II) electrodes had a non-Nernstian response of 25 mV pM . Both selenides and tellurides can be used for potentiometric determination, but the manganese(II) electrode serves as an analytical tool only when the disc consists of manganese(II) telluride and silver sulphide.     

Biligand metal chelates of 1,10-phenanthroline and several salicyclic acid derivatives in solution

Summary Mixed ligand complexes of copper(II), zinc(II), nickel(II) and cobalt(II) ions involving 1,10-phenanthroline (phen) as primary and 3,5-dinitrosalicylic acid (dnsa), 5-nitrosalicylic acid (nsa), 5-chlorosalicylic acid (csa) and 3,5-dibromosalicylic acid (dbsa) as secondary ligands in solution have been investigated potentiometrically [25°, µ = 0.1 M [NaClO₄], medium 50% v: v aqueous ethanol]. The stability order of mixed ligand complexes with respect to the metal ions obeys the natural order: cobalt(II) < nickel(II) < copper(II) > zinc(II). The stabilities of the heterometal chelates have been compared with the corresponding homometal chelates of the secondary ligands and have been interpreted in terms of metal-ligand effects and coulombic interactions between various ligand anion species present.     

Crystal Structure of 2-pyridine-2-yl-3(pyridine-2-carboxylideneamino)quinazolin-4(3H)-one and its Ligating Diversity Towards Transition Metal(II) Ions

The synthesis of a new ligand 2-pyridine-2-yl-3(pyridine-2-carboxylideneamino)-quinazolin-4(3H)-one (PPCAQ) is described together with its manganese(II), cobalt(II), nickel(II), copper(II), zinc(II) and cadmium(II) complexes. The single crystal X-ray diffraction studies of the ligand reveal the presence of two crystallographically independent molecules in asymmetric unit cell, which exhibit N…N attractive interaction. The PPCAQ and its metal complexes were characterized by analytical, spectroscopic (i.r., n.m.r and u.v.–vis), magnetic moment, conductance and thermal studies. The i.r. spectral studies reveal the ligational diversity of the PPCAQ towards different metal ions as NNN donor in cobalt(II), copper(II), zinc(II) and cadmium(II) complexes and as ONN donor in manganese(II) and nickel(II) complexes. The antimicrobial activity of all the compounds was tested; copper(II), zinc(II) and cadmium(II) complexes show enhanced antibacterial activity compared to the free ligand.     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

A new selective and high affinity polymeric complexing agent for transition metal ions

Summary The synthesis and characteristics of a new chelating glycinohydroxamate-containing polymer resin is described. The functionality of the polymer is 1.76 mmolg^–1. The hydrogen capacity, water regain and adsorption capacities for iron(III), cadmium(II), cobalt(II), copper(II), nickel(II) and zinc(II) were measured at various pH values; uptake of the metal ions increased with pH and was quantitative above pH 3 for most of the metal ions. All cations studied showed high exchange rates towards the resin. The half saturation times for iron(III), cadmium(II), copper(II) and zinc(II) were all less than 1 min. The coordination behaviour of the resin was studied with the help of e.p.r., i.r., u.v. and potentiometry. The pK _a of the resin is 10.70 and the log value of the stability constants for iron(III), copper(II), lead(II), zinc(II), cobalt(II), manganese(II), cadmium(II) and nickel(II) were measured as 21.81, 19.50, 19.20, 18.59, 18.51, 18.46, 18.37 and 18.36, respectively, at 25 ° C and I = 0.2M KCl.     

Polymetallic complexes: part VII. bis(benzoin)thiocarbohydrazide complexes of cobalt(II), copper(II) and zinc(II)

Summary Complex compounds of cobalt(II), copper(II) and zinc(II) with bis(benzoin)thiocarbohydrazide have been synthesised. The ligand is probably coordinated to the metal ions as an ONNO tetradentate donor, giving rise to binuclear metal complexes with a halogen bridge. Structures have been assigned on the basis of analyses, conductance, magnetic susceptibility, i.r., electronic spectra and molecular weight data.     

Competitive adsorption of Ca2+ and Zn(II) ions at monodispersed SiO2/electrolyte solution interface

A study of competitive adsorption of Ca(2+) and Zn(II) ions at the monodispersed SiO(2)/electrolyte solution interface is presented. Influence of ionic strength, pH, and presence of other ions on adsorption of Ca(2+) and Zn(II) in the mentioned system are investigated. zeta potential, surface charge density, adsorption density, pH(50%), and DeltapH(10-90%) parameters for different concentrations of carrying electrolyte and adsorbed ions are also presented. A high concentration of zinc ions shifts the adsorption edge of Ca(2+) ions adsorbed from solutions with a low initial concentration at the SiO(2)/NaClO(4) solution interface to the higher pH values. This effect disappears with a concentration increase of calcium ions. The presence of Ca(2+) ions in the system slightly affects the adsorption of zinc ions on SiO(2), shifting the adsorption edge toward lower pH values and thereby increasing the adsorption slope.     

Synthesis, structure and spectroscopy of new thiopyrone and hydroxypyridinethione transition-metal complexes

The coordination chemistry of several O,S mixed donor ligands, namely thiopyrone and hydroxypyridinethione chelators, with a variety of middle and late first-row transition-metal ions is described. Complexes of 3-hydroxy-2-methyl-4-thiopyrone (thiomaltol) with cobalt(II), copper(II) and zinc(II); 3-hydroxy-1,2-dimethyl-4(1H)-pyridinethione (3,4-HOPTO) with iron(III), nickel(II), copper(II) and zinc(II); and 3-hydroxy-1-methyl-2(1H)-pyridinethione (3,2-HOPTO) with iron(III), nickel(II), copper(II) and zinc(II) have been synthesized and characterized. The structures, absorbance spectroscopy, cyclic voltammetry and superconducting quantum interferometer device (SQUID) measurements of selected metal complexes, as well as ligand protonation constants, are reported. Most of the metal complexes show coordination geometries indicative of a strong trans influence by the O,S chelators. The data presented herein provide the most detailed study of the transition-metal coordination chemistry of both thiopyrone and hydroxypyridinethione O,S donor ligands to date, and provide the basis for the investigation of these ligands in realm of biological inorganic chemistry.