Availability and development of an enzyme immunomicrosensor based on an ISFET for human immunoglobulins

A critical evaluation of the potentiometric response of an enzyme immuno-ISFET sensor has demonstrated that it is an effective, simple sensor for human immunoglobulin (IgG). The sensor was constructed using an immobilized human IgG membrane and an ISFET. The assay procedure involves the competitive immunochemical reaction of ureuse-labelled anti-human IgG with human IgG in samples and membrane-bound IgG and the electrochemical determination of membrane-bound urease activity. A linear relationship was obtained between the initial rate of response and the logarithm of IgG concentration from 0.1 to 2.0 mg ml^?1.     

Flow-Injection Enzyme Immunoassay for Human IgG by Using Enhanced Chemiluminescence Reaction for Horseradish Peroxidase Label Quantitation

Abstract

A flow-injection sandwich enzyme immunoassay for human IgG as model antigen by using horseradish peroxidase as label, polystyrene beads as solid support, and the enhanced chemiluminescence reaction for peroxidase quantitation is described. the kinetics of antigen—immobilized antibody interaction has been studied and the quantitative time-concentration ranges of reactions have been estimated. Each of the two immunochemical steps of analysis have been pursued in the kinetic regime. the time for each immunochemical step was reduced to 2–3 min. the enhanced luminescent reaction involving luminol and p-iodophenol as substrates was used to detect the peroxidase label. the conditions for chemiluminescent reaction were optimized. the detection limit for peroxidase in a 3 min assay was 5–10^?16 moles/tube. the detection limit for IgG, in the developed immunoassay, is 10^?9 M, the overall time of the assay being 5–10 min.     

Reflectometry in kinetic studies of immunological and enzymatic reactions on solid surfaces

An optical method is described, by means of which immunological and enzymatic reactions can be followed at a primary level on a solid surface, without labelling procedures. When plane-polarized light is reflected at a solid surface, there is a minimum in reflectance at a certain angle of incidence, the pseudo-Brewster angle. For example, a layer of protein adsorbed on a silicon surface increases the reflectance with increasing amount of adsorbed material. High sensitivity is obtained because of the large difference in refractive index between silicon and organic material; about 0.1 μg cm^?2 adsorbed protein can be detected. In a model system of human IgG and anti-human IgG, the primary adsorption of IgG on a hydrophobic surface is first measured, and on this IgG-coated surface the binding kinetics of anti-IgG could be measured. The kinetics of proteolytic degradation of IgG-coated surfaces by trypsin was also investigated.     

A new strategy for electrochemical immunoassay based on enzymatic silver deposition on agarose beads

A novel, sensitive electrochemical immunoassay in a homogeneously dispersed medium is described herein based on the unique features of agarose beads and the special amplified properties of biometallization. The immunochemical recognition event between human immunoglobulin G (IgG) and goat anti-human IgG antibody is chosen as the model system to demonstrate the proposed immunoassay approach. Avidin-agarose beads rapidly react with the biotinylated goat anti-human IgG antibody to form agarose beads-goat anti-human IgG conjugate (agarose bead-Ab). Agarose bead-Ab, alkaline phosphatase conjugated goat anti-human IgG antibody (ALP-Ab) and the human IgG analyte are mixed to form sandwich-type immunocomplex followed by the addition of the enzymatic silver deposition solution to deposit silver onto the surface of proteins and agarose beads. The silver deposited are dissolved and quantified by anodic stripping voltammetry. The influence of relevant experimental variables was examined and optimized. The logarithm of the anodic stripping peak current depended linearly on the logarithm of the concentration of human IgG in the range from 1 to 1000 ng/ml. A detection limit as low as 0.5 ng/ml human IgG was attained by 3σ-rule. The R.S.D. of the approach is 9.65% for eight times determination of 10 ng/ml human IgG under same conditions. Optical microscope and TEM graphs were also utilized to characterize agarose beads and silver nanoparticles formed.     

An convenient strategy for IgG electrochemical immunosensor: the platform of topological insulator materials Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> and ionic liquid

A substantial outstanding challenge in diagnostics and disease monitoring is the ability to assay rapidly and conveniently for protein biomarkers within complex biological media. Bi₂Se₃, as an important topological insulator (TI) material, was synthesized by a solvothermal method and characterized structurally. Subsequently, the composite of Bi₂Se₃ and ionic liquid ([BMIm]BF₄ IL) was used as a sensing interface to cross-link goat anti-human immunoglobulin G (anti-IgG) via glutaraldehyde (GA) to fabricate an Bi₂Se₃/IL/GA/anti-IgG-carbon paste electrode (CPE). The nonspecific binding sites were enclosed with bovine serum albumin (BSA) to develop a label-free IgG immunosensor. The result showed that the proposed label-free IgG immunosensor exhibited high specificity with a detection limit of 0.8 ng mL^?1 and linear range from 2 to 300, and 300 to 2200 ng mL^?1. Besides, the immunosensor exhibited high specificity for IgG detection, acceptable reproducibility, and stability. Thus, the strategy reported here paved a simple way to design a sensitive and cost-effective sensing platform for extension to other disease biomarkers.     

Simpler and More Sensitive Immune Complex Transfer Enzyme Immunoassay for Anti-Htlv-I Igg Using Modified Polystyrene Beads,Microplates and Fluororeader

Abstract

In the previous immune complex transfer enzyme immunoassay for anti-HTLV-I IgG, the transfers of polystyrene beads in and out of test tube were handled with tweezers, and the bound β-D-galactosidase activity was measured with a fluorometer. The use of tweezers was considered the primary cause of false-positivity by carryover. Furthermore, the testing of many samples using a tweezer as a means of transfer was difficult. In the present immune complex transfer enzyme immunoassay, polystyrene beads were attached to plates through cylindrical bars and were used in microplate wells. Therefore, no tweezers were required. The bound β-D-galactosidase activity was measured with a fluororeader. This allowed the elimination of false-positivity due to carryover and made it easier to test many samples with higher sensitivity and reliability.     

Design of luminescent biochips based on enzyme,antibody, or DNA composite layers

The use of beads bearing bioactive molecules to develop generic biochips based on chemi- and electro-chemiluminescent detection was evaluated. The biochips were composed of arrayed biosensors, including enzyme-charged beads, antigen-charged beads, or oligonucleotide-charged beads, entrapped in poly(vinyl alcohol) (PVA-SbQ) photopolymer. In each case the sensing layers were spotted at the surface of a glassy carbon electrode as 0.3 µL drops, generating 500–800 µm spots. The luminescent reactions were either catalysed by horseradish peroxidase or triggered by application of a +850 mV potential between the glassy carbon electrode and a platinum pseudo-reference. Enzyme biochips were designed for the concomitant detection of choline, glucose, glutamate, lactate, lysine, and urate, based on the corresponding oxidase-charged beads and the electro-chemiluminescent (ECL) reaction with luminol-immobilised beads of the hydrogen peroxide produced. Limits of detection of 1 µmol L^–1 for glutamate, lysine and uric acid, 20 µmol L^–1 for glucose, and 2 µmol L^–1 for choline and lactate were found with detection ranging over three decades at least. Use of the electro-chemiluminescent biochip was extended to a tri-enzymatic sensing layer based on kinase-oxidase activity for detection of acetate. A reaction sequence using acetate kinase, pyruvate kinase, and pyruvate oxidase enabled the production of H₂O₂ in response to acetate injection in the range 10 µmol L^–1 to 100 mmol L^–1. Based on IgG-bearing beads, a chemiluminescent immuno-biochip has been also realised for the model detection of human IgG. Biotin-labelled anti-human IgG were used in a competitive assay, in conjunction with peroxidase-labelled streptavidin. Free antigen could then be detected with a detection limit of 25 pg (10⁸ molecules) and up to 15 ng. In a similar way, the use of oligonucleotide-immobilised beads enabled the realisation of DNA-sensitive biochips which could be used to detect a biotin-labelled sequence al a level of 5×10⁸ molecules.     

Chromatographic Removal of Host Cell DNA from Cellular Products Using Columns Packed with Cationic Copolymer Beads

This paper describes a method for selective removal of DNA from various cellular products using columns packed with cross-linked poly(ethyleneimine) (PEI) beads or cross-linked N,N-dimethylaminopropylacrylamide (DMAPAA) beads. Each bead type showed a high DNA-adsorbing activity under experimental conditions of pH 5.0–9.0 and ionic strength of μ = 0.05–0.4. When γ-globulin was present in solution with DNA under physiological conditions (pH 7.2, μ = 0.17), DNA-removing activity of PEI columns was unsatisfactory because both the DNA and the γ-globulin were adsorbed onto the column. In contrast, DMAPAA columns allowed removal of DNA from various protein solutions contaminated with DNA. DNA concentration in each treated protein solution was below 10 ng mL^?1, and high recovery of proteins was obtained.     

A New Nanogold-Labeled Immunoresonance Scattering Spectral Probe for Determination of Trace IgG

A kind of 9 nm gold nanoparticles was prepared with the trisodium citrate and used to label goat anti-human IgG to obtain an IgG immunoresonance scattering spectral probe. In pH 5.8 buffer solution and in the presence of polyethylene glycol （PEG）, the immune reaction between gold-labeled goat anti-human IgG and IgG took place, and the resonance scattering intensity at 580 nm （I580nm） was enhanced greatly. The enhanced intensity AIRS is pro- portional to the IgG concentration from 1.3 to 1.5 X 10^3 ng.mL^-1, with a detection limit of 0.78 ng.mL ^-1. This assay showed high sensitivity and good selectivity for quantitative determination of IgG in human serum, with satisfactory results.     

Use of Normal IgG and its Fragments to Lower the Non-Specific Binding of Fab'-Enzyme Conjugates in Sandwich Enzyme Immunoassay

Abstract

An antibody IgG-coated polystyrene ball was incubated with an antigen and then with affinity-purified Fab'-enzyme conjugate in the presence of normal IgG, F(ab')₂, Fab' or Fab'-bovine serum albumin conjugate. After washing by incubation at 30[ddot]C for 10 min with shaking, the enzyme activity bound to the polystyrene ball was assayed. The non-specific binding of the Fab'-enzyme conjugate to the polystyrene ball considerably decreased in the presence of normal IgG and the other related proteins, while the specific binding decreased only slightly. As a result, the detection limit of hCG, human IgE and human α-fetoprotein was improved 3 to 10-fold.     

Spectral and fluorescent kinetics features of Nd3+ ion in Nb2O5, Ta2O5 and La2O3 mixed lithium zirconium silicate glasses

A sensitive competitive flow injection chemiluminescence (CL-FIA) immunoassay for immunoglobulin G (IgG) was developed using gold nanoparticle as CL label. In the configuration, anti-IgG antibody was immobilized on a glass capillary column surface by 3-(aminopropyl)-triethoxysilane and glutaraldehyde to form immunoaffinity column. Analyte IgG and gold nanoparticle labeled IgG were passed through the immunoaffinity column mounted in a flow system and competed for the surface-confined anti-IgG antibody. CL emission was generated from the reaction between luminol and hydrogen peroxide in the presence of Au (III), generated from chemically oxidative dissolution of gold nanoparticle by an injection of 0.10 mol L⁻¹ HCl–0.10 mol L⁻¹ NaCl solution containing 0.10 mmol L⁻¹ Br₂. The concentration of analyte IgG was inversely related to the amount of bound gold nanoparticle labeled IgG and the CL intensity was linear with the concentration of analyte IgG from 1.0 ng mL⁻¹ to 40 ng mL⁻¹ with a detection limit of 5.2 × 10⁻¹⁰ g mL⁻¹. The whole assay time including the injections and washing steps was only 30 min for one sample, which was competitive with CL immunoassays based on a gold nanoparticle label and magnetic separation. This work demonstrates that the CL immunoassay incorporation of nanoparticle label and flow injection is promising for clinical assay with sensitivity and high-speed.     

Spectrophotometric Determination of Human Immunoglobulin G Based on Enlargement of Gold Nanoparticles

Based on the sandwich immunoreaction and enlargement of colloidal gold, a simple spectrophotometric determination of human immunoglobulin G (IgG) was developed. The sandwich immunoreaction among the goat‐anti‐human IgG, the human IgG and goat‐anti‐human IgG labeled with colloidal gold was completed on the surface of 96 well clear polystyrene high bind stripwell(tm) microplate. The immobilized colloidal gold was enlarged by the reaction of 0.01% HAuCl₄ with 0.4 mmol·L^?1 NH₂OH·HCl. A common UV‐Vis spectrophotometer was employed to measure the absorption of the colloidal gold enlarged. The absorption signal of colloidal gold is proportional to the logarithm of human IgG concentration ranging from 5.0×10^?9 to 2.0×10^?5 g·mL^?1, which is comparable with those obtained by other immunoassays. In the proposed method, the immobilized colloidal gold can be easily enlarged and a new absorption band is present at about 620 nm, which makes the signal be recorded with a common medical analyzer. This spectrophotometric determination can be made in a common laboratory without the well‐trained technician and the special equipment.     

Solid phase immune reactions as monitored by sedimentation field-flow fractionation

Summary Sedimentation field-flow fractionation was shown to permit the precise evaluation of surface concentrations of human IgG, adsorbed to polystyrene latex spheres of different sizes. Unlike conventional techniques for measuring protein uptake by colloidal substrates, this method allowed a direct evaluation of mass adsorbed per unit area, without the need for potentially destructive labelling reactions. Thus, a four hour adsorption of IgG from a 3–10 fold excess of protein in solution yielded surface concentrations which were 1.4±0.1 mg/m² on a 272 nm latex and 1.9±0.1 mg/m² on a latex with a diameter of 142 nm. The lower value coincided with the estimated monolayer surface coverage. The IgG-PS 272 nm adsorption complex was shown to take up negligible amounts of HSA from a 10 mg/mL solution, while its specific uptake of a polyclonal rabbit anti-human IgG was 2.6 molecules per molecule of adsorbed antigen. The same ratio was found for the smaller particles. The surface concentration of adsorbed second antibody, often crucial in immunodiagnostic quantifications, was therefore found to be significantly enhanced by the increased substrate curvature presented by the smaller particles.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

Photoacoustic spectrometric determination of trace phosphorus as molybdenum blue adsorbed on uniform anion-exchange beads

Photoacoustic spectrometry was applied to the determination of phosphorus as molybdenum blue species adsorbed on an anion-exchange resin (10 mg of uniform beads). The photoacoustic intensity of ten resin particles on a glass plate was measured at 760 nm. The calibration graph obtained was linear in the range of 0.05–0.5 μg of phosphorus. The relative standard deviation for ten determinations of 0.3 μg P was 5.0%. The detection limit was 2 ng P ml^?1.     

磁性无机-生物复合粒子敏感膜新型电流型免疫传感器的研究

合成了磁性Fe3O4纳米粒子,利用3-氨基丙基三乙氧基硅烷(APS)进行硅烷化,形成表面带有氨基的磁性Fe3O4纳米复合粒子,再用戊二醛将羊抗人免疫球蛋白G抗体(anti-IgG)固定在该磁性粒子表面,通过磁力将其修饰于固体石蜡碳糊电极表面制作成免疫传感器。与标记HRP的二抗体anti-IgG结合,以对苯二酚作为电子媒介体,实现对人免疫球蛋白G(IgG)的定量检测。IgG测定线性范围为2.5~400μg/L,检出限为0.75μg/L。该免疫传感器制作简单,成本低,表面更新方便,可用于临床血清检测。     

Spectrofluorimetric determination of 2-amino-5-chlorobenzophenone impurity in chlordiazepoxide hydrochloride

2-Amino-5-chlorobenzophenone (5×10^?8?3×10^?5 g ml^?1) is determined by oxidation to 2-chloro-9-acridanone with cerium (IV) in phosphoric acid solution followed by spectrofluorimetric measurement at λ(em) = 465 nm with λ(ex) = 405 nm. The chlordiazepoxide does not react, thus the procedure is useful for quality control.     

Simultaneous Plutonium and Uranium Isotopic Analysis from a Single Resin Bead - A Simplified Chemical Technique for Assaying Spent Reactor Fuels

Abstract

The method uses basic anion resin to adsorb plutonium and uranium from 7–8 M HNO₃ solutions containing dissolved spent reactor fuels. After equilibrating the resin with the solution, a single bead is used to determine the isotopic composition of plutonium and uranium on sample sizes as small as 10^?9 to 10^?10 g of each element per bead. Isotopic measurements are essentially free of isobaric interferences and fission product contamination in the mass spectrometer is eliminated. A very small aliquot of dissolver solution containing 10^?6 g of U and 10^?8 g of Pu is sufficient sample for chemically preparing several resin beads. A single prepared bead is loaded onto a rhenium filament and analyzed in a two-stage mass spectrometer using pulse counting for ion detection to obtain the high sensitivity required. Total quantity of the elements, in addition to isotopic abundances, can be determined by isotope dilution. Other areas where the method may be useful are: in plutonium production, isotope separations, and for trace detection of contamination on reactor parts.     

Determination of human IgG by solid substrate room temperature phosphorescence immunoassay based on an antibody labeled with nanoparticles containing dibromofluorescein luminescent molecules

Luminescent silicon dioxide nano-particles with size of 20 nm, which containing dibromofluorescein (D) were synthesized by sol-gel method (symbolized by D-SiO₂).The particles can emit intense and stable room temperature phosphorescence signal on polyamide membrane when Pb(Ac)₂ was used as a heavy atom perturber. The λ_exmax/λ_emmax was 457/622 nm. Our research indicated that the specific immune reaction between goat-anti-human IgG antibody labeled with D-SiO₂ and human IgG could be carried out on polyamide membrane quantitatively, and the phosphorescence intensity of the particle was enhanced after the immunoreactions. Thus a new method of solid substrate room temperature phosphorescence immunoassay (SS-RTP-IA) for the determination of human IgG was established basing on antibody labeled with the D-SiO₂ nanoparticles. The linear range of this method was 0.0624-20.0 pg human IgG spot⁻¹ (corresponding concentration: 0.156-50.0 ng ml⁻¹, the sample volume: 0.40 μl spot⁻¹) with a limit of detection (LD) as 0.018 pg spot⁻¹, and the regression equation of working curve was ΔI_p = 7.201 m_IgG (pg spot⁻¹) + 82.57. Samples containing 0.156 and 50.0 ng ml⁻¹ of IgG were measured repeatedly for 11 times and R.S.D.s were 4.1 and 3.4%, respectively. Results showed that this method had the merits as sensitive, accurate and precise.     

Electrochemical Immunoassay for Free Prostate Specific Antigen (f‐PSA) Using Magnetic Beads

Prostate specific antigen (PSA) is a prominent marker for the prostate carcinoma. It is found in human blood in free (f‐PSA) and complex forms. These two forms together are called total PSA (t‐PSA). Estimation of both forms is essential to predict malignancy. In this study we report a unique and effective technique of electrochemical detection of f‐PSA using magnetic beads on a three‐electrode screen‐printed sensor. A magnetic bead enzyme linked immunosorbent assay (ELISA) was performed in a cuvette. Following the immunoassay, magnetic beads were recovered by a magnetic concentrator and transferred on the working electrode of the 3‐electrode assembly. The amperometric response, a measure of the amount of residual enzyme activity on the beads and hence the concentration of analyte in solution, was determined by addition of enzyme substrate. The device has a detection limit of <0.1 ng mL^?1 f‐PSA and a linear range of 0 to 1 ng mL^?1 f‐PSA.