Flow-injection determination of d-mannitol with immobilized mannitol dehydrogenase

A flow-injection system is described for the determination of d-mannitol. Mannitol dehydrogenase is immobilized on poly(vinyl alcohol) beads and packed in a column (5 cm × 4 mm i.d.). The NADH formed is detected fluorimetrically. The response is linear between 5 × 10^?7 and 1 × 10^?4 M mannitol and the detection limit is 1 × 10^?7 M. The throughput is 30 samples per hour. The reactor is stable for at least 8 weeks.     

A nafion/crown ether film electrode and its application in the anodic stripping voltammetric determination of traces of silver

Glassy carbon electrodes are modified by coating with dicyclohexyl-18-crown-6 in Nafion-117. The electrode is used for a very sensitive anodic stripping voltammetric determination of silver. High sensitivity is obtained owing to the release of crown molecules from the silver-crown complex during the deposition. The detection limit is 2×10^?12 M after electrodeposition for 30 min. The recommended supporting electrolyte is 4×10^?3–7×10^?3 M potassium chloride in 0.01 M nitric acid with a deposition potential of ?0.30 V vs. SCE and a linear potential scan. Three typical calibration graphs were linear over the range 2×10^?11–1×10^?8 M for deposition times of 30, 20 and 8 min, respectively. The silver content of reagent-grade ammonium nitrate was found to be 0.48×10^?4% with a relative standard deviation of 3.7% (n=7) for parallel determinations.     

Determination of carbaryl by flow injection with luminol chemiluminescence inhibition detection

A flow-injection procedure is described for the determination of carbaryl based on its inhibition effect on luminol-cobalt(II) chemiluminescence reaction in alkaline medium in the presence of hydrogen peroxide. The calibration data over the range 5.0?×?10^?7 to 20?×?10^?6?M give a correlation coefficient (r ²) of 0.9972 with relative standard deviations (RSD; n?=?4) in the range of 1.0–2.1% with a limit of detection (3?×?blank noise) of 2.37?×?10^?7?M for carbaryl. The sample throughput was 120?h^?1. The effects of some carbamates, anions, and cations were studied on luminol CL system for carbaryl determination. The proposed method has been applied to determine carbaryl in natural waters.     

Quantitative Analysis of Prometrine Herbicide by Liquid–Liquid Extraction Procedures Coupled to Electrochemical Measurements

A sensitive method is proposed for the preconcentration and quantification of the herbicide Prometrine (PROM) at a liquid‐liquid interface employing square‐wave voltammetry. The preconcentration stage was based on liquid‐liquid extraction methodology and the PROM quantification was carried out from the peak current of square‐wave voltammograms. Under the experimental conditions employed, linear calibration curves in the concentration range 1.0×10^?6 M–5.0×10^?5 M, with detection limit equal to 1.5×10^?6 M were obtained without pretreatment of the samples. This linear range, as well as detection limit could be extended towards lower concentrations when a pretreatment procedure was employed. In this way, linearity of calibration curves between 8.0×10^?8 M and 2.4×10^?7 M and detection limit of 1.0×10^?7 M, were observed. On the other hand, the standard addition method was also used as an alternative and an appropriated quantification technique for this system. A linear concentration range between 1.0×10^?6 M and 2.7×10^?5 M, with a correlation coefficient of 0.997, was obtained. This procedure has also a promising application in the separation of herbicides from other interferents, present in real samples, previous to their quantification.     

Determination of acetaldehyde by a chemiluminescence method

The determination of acetaldehyde was achieved by monitoring the chemiluminescence emission from the luminol-potassium hexacyanoferrate (III) reaction in the presence of xanthine oxidase. The linear range was three orders of magnitude, the detection limit (2σ) was 4 × 10^?7 M and the relative standard deviation (n = 5) was 10.6% for 4.3 × 10^?7 M. No interference was observed from seven organic and inorganic species at a 1000-fold excess relative to a concentration of 1 × 10^?5 M acetaldehyde.     

Fluorimetric determination of nitrate in natural waters with 3-amino-1,5-naphthalenedisulphonic acid in a flow-injection system

A rapid, sensitive and precise flow-injection method for the determination of nitrate in natural waters is presented. Nitrate is first reduced in a copperized cadmium column to nitrite, which reacts with 3-amino-1,5-naphthalenedisulphonic acid to form the azoic acid. This acid forms a fluorescent salt in alkaline medium. The injecton rate is about 30 h^?1, the relative standard deviation for 10 injections of 2 × 10^?5 M nitrate is 0.8%, and the detection limit (S/N = 3)_is 1 × 10^?8 M nitrate.     

Sequential extraction partitioning of metals,sulfur, and phosphorus in bottom ash from a coal-fired power plant

Abstract

The herbicide trifluralin was analysed by adsorptive stripping voltammetry on a glassy carbon electrode. The linear concentration range was 2.5 × 10^?7 M – 1.25 × 10^?6M when using 5-min preconcentration at open circuit conditions in Britton-Robinson buffer of pH 7.0. The detection limit of trifluralin was 2.5 × 10^?8M. The relative standard deviation was 3.3% at a concentration of 1.0 × 10^?6M (n=5). The method was applied to the determination of trifluralin in soil with good recovery.     

Performance of the stopped-flow technique in chemiluminescence spectrometry based on direct rate measurements

The stopped-flow technique is evaluated for the determination of hydrogen peroxide based on the generation of chemiluminescence by the cobalt-catalyzed oxidation of luminol. Methods based on direct rate measurements on the formation and decay steps of the chemiluminescence process are compared with those involving conventional peak height or peak area measurement. The rate methods result in better precision or selectivity. The detection limit is 5×10^?9 M (25 pmol) and the sample throughput 60 h^?1. An improved method for determining the formation and decay rate constants based on a fitting program is reported.     

Dioctadecyldimethylammonium Chloride Bilayer Membrane Vesicle-Enhanced and Manganese (II)-Catalyzed Chemiluminescence for Determination of Adrenaline by a Flow-Injection Method

Abstract

A new chemiluminescence system reinforced by use of a surfactant and a metal catalyst is demonstrated for selective determination of adrenaline by a flow-injection method. The weak light emission originating from an aerobic oxidation of adrenaline in an alkaline solution is dramatically enhanced by ordered surfactant molecular assemblies, dioctadecyldimethylammonium chloride bilayer membrane vesicles, with the largest enhancement factor of 1000 which has not ever been realized. The enhanced emission is further increased by a Mn(II) catalyst with an enhancement factor of ca. 40. The limit of determination(S/N=2) is 1×10^?8M (0.2 ng in 100-μ1 injection), the linear range is four ordrers of magnitude, the sample throughput is 100 h^?1. and the relative standard deviation(n=5) is 0.9 % for 5×10^?7M adrenaline. Of other substances including dopamine, noradrenaline, and related compounds, p-hydroxymandelenic acid chemiluminesces most strongly after adrenaline, the 1×10^?3M solution providing a signal 24% of that for 1×10^?6M adrenaline.     

Cyclic voltammetry of Tifluadom at a C18-modified carbon-paste electrode

Tifluadom, N-[5-(2-fluorophenyl)-2,3-dihydro-methyl-1H-1,4-benzodiazepine]-2-4-methyl-3-thiophene carboxamide, was determined by using a carbon-paste electrode modified with C₁₈ μBondapak. Adsorption on the electrode served as a preconcentration step which improved the limit of detection. Preconcentration for 5 min (open circuit) gave a linear range of 2.2×10^?7 M?4.5×10^?6 M with a detection limit of 1.3×10^?7 M (%C₁₈=25, w/w) for Tifluadom in Britton-Robinson buffer pH 6. The determination of Tifluadom added to urine required no preliminary treatment; the detection limit was 1.3×10^?6 M.     

Influence of Zone Stacking Sequences on CL Intensity and Determination of Histidine in Sequential Injection Analysis

Abstract

A sequential injection method coupled to chemiluminescence detection was described for the determination of trace amount of histidine. The physical and chemical parameters depicting the system were studied to obtain optimum conditions. It was found that physical dispersion caused by the change of zone stacking sequence was significant factor influencing CL intensity for a rapid CL reaction. At optimized conditions, histidine can be determined in the linear range from 5.0 × 10^?7to 1.0 × 10^?3 M with a detection limit (3σ) of 2 × 10^?7 M for 60 µl sample. The relative standard deviation (RSD) for eleven repeated measurements of 4 × 10^?5 M histidine was 0.97%, and the sampling frequency was 80 h^?1, and the recoveries were varied from 90.0 to 103.3%. The proposed method has been successfully applied to the determination of histidine in beer samples.     

Flow-injection spectrophotometric determination of ascorbic acid by reduction of vanadotungstophosphoric acid

Ascorbic acid may be determined spectrophotometrically at 360 nm based on reduction of vanadotungstophosphoric acid using flow-injection analysis. The carrier stream was distilled water and the reagent streams were buffer solution (pH 3.0), 1.735 × 10^?3 M dodecatungstophosphoric acid and 1.735 × 10^?3 M sodium vanadate. The injection rate was 80 h^?1. The calibration graph was linear up to 80 μg ml^?1 ascorbic acid and the relative standard deviation for the determination of 20 μg ml^?1 ascorbic acid was 1.5% (n=10). The detection limit was 1.0 μg ml^?1 ascorbic acid, based on an injection volume of 250 μl. The system was applied to the determination of ascorbic acid in vitamin C tablets.     

Electrochemical investigation and determination of ceftazidime in pharmaceutical dosage forms and human urine

A voltammetric study of the oxidation of Ceftazidime (CEFT) has been carried out at the glassy carbon electrode by cyclic, differential pulse (DPV) and square wave (SWV) voltammetry. The oxidation of CEFT was irreversible and exhibited diffusion controlled process depending on pH. The oxidation mechanism was proposed and discussed. According to the linear relationship between the peak current and concentration, DPV and SWV voltammetric methods for CEFT assay in pharmaceutical dosage forms and human urine were developed. For analytical purposes, a well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H₂SO₄ at 1.00 and 1.02 V for differential pulse and square wave voltammetric techniques, respectively. The linear response was obtained within the range of 4 × 10^?6?8 × 10^?5 M with a detection limit of 6 × 10^?7 M for differential pulse and 4 × 10^?6–2 × 10^?4 M with a detection limit of 1 × 10^?6 M for square wave voltammetric technique. The determination of CEFT in 0.1 M H₂SO₄ was possible over the 2 × 10^?6–1 × 10^?4 M range in urine sample for both techniques. The standard addition method was used for the recovery studies.     

Preparation of Cu (II) imprinted polymer electrode and its application for potentiometric and voltammetric determination of Cu (II)

The Cu (II) imprinted polymer glassy carbon electrode (GCE/Cu-IP) was prepared by electropolymerization of pyrrole at GCE in the presence of methyl red as a dopant and then imprinting by Cu²⁺ ions. This electrode was applied for potentiometric and voltammetric detection of Cu²⁺ ion. The potentiometric response of the electrode was linear within the Cu²⁺ concentration range of 3.9 × 10^?6 to 5.0 × 10^?2 M with a near-Nernstian slope of 29.0 mV decade^?1 and a detection limit of 5.0 × 10^?7 M. The electrode was also used for preconcentration anodic stripping voltammetry and results exhibited that peak currents for the incorporated copper species were dependent on the metal ion concentration in the range of 1.0 × 10^?8 to 1.0 × 10^?3 M and detection limit was 6.5 × 10^?9 M. Also the selectivity of the prepared electrode was investigated. The imprinted polymer electrode was used for the successful assay of copper in two standard reference material samples.     

Spectrofluorometry study of β-cyclodextrin and N-phenyl-1-naphthylamine inclusion complex and its analytical application via artificial neural network

The interaction between β-cyclodextrin (βCD) and N-phenyl-1-naphthylamine has been studied spectrofluorimetrically and found to form a 1:1 (βCD:NPN) inclusion complex at optimum conditions of pH 8 with the formation time of 120?s. The association constant of the complex was established to be 6.0?×?10²?M, while a remarkable enhancement in fluorescence intensity was also observed at 445?nm with excitation of 334?nm. A spectroflurometric method for the detection of N-phenyl-1-naphthylamine has been developed having a dynamic range linear up to 4.67?×?10^?7?M with a limit of detection of 0.58?nM. The repeatability study at two different βCD concentrations of 1.0?×?10^?4 and 4.0?×?10^?4?M was found to give RSD values of 2.40 and 1.42%, respectively. Artificial neural network (ANN) has been utilised to model the analytical system and successfully extended the analytical dynamic range up to 8.0?×?10^?7?M from the original 4.67?×?10^?7?M, brief network training and the optimum parameters of are described in this work.     

Flow-injection spectrophotometric determination of palladium in catalysts and dental alloys with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropyl-amino)aniline

2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)aniline rapidly forms a water-soluble complex with palladium in an acetate-buffered medium at pH 3.2.The molar absorptivity of the complex is 9.84×10⁴l mol^?1 at 612 nm. The calibration graph is linear over the range of 10–100 μg l^?1 palladium; the detection limit is 2 μg l^?1 and the relative standard deviation is 0.6% for 100 μg l^?1 palladium. The sample throughput is 50 h^?1. Divalent transition metals (Fe, Ni, Co) do not interfere at levels from 2 to 10 mg l^?1. Interference from copper is prevented by adding 10^?3 M EDTA solution to the carrier stream. Palladium in solutions of catalysts and dental alloys can be determined selectively, sensitively and rapidly.     

Amperometric Determination of Bilirubin with Flow Injection Analysis System

Abstract

The amperometric method using the flow injection system has been developed for the determination of bilirubin. Bilirubin is oxidized to biliverdin at the glassy carbon working electrode. The optimum conditions were investigated. Linear calibration curve was obtained between 1.0×10⁶ and 1.0×10^?3M, with a sampling rate of 20 samples h^?1 and a relative standard deviation of 3.2%. The limit of detection is 4.0×10^?7M. Interference of hemoglobin was not observed.     

Anodic Voltammetric Behavior and Determination of Antihistaminic Agent: Fexofenadine HCl

Abstract

A voltammetric study of the oxidation of fexofenadine HCl (FEXO) has been carried out at the glassy carbon electrode. The electrochemical oxidation of FEXO was investigated by cyclic, linear sweep, differential pulse (DPV), and square wave (SWV) voltammetry using glassy carbon electrode. The oxidation of FEXO was irreversible and exhibited diffusion‐controlled process depending on pH. The dependence of intensities of currents and potentials on pH, concentration, scan rate, nature of the buffer was investigated. Different parameters were tested to optimize the conditions for the determination of FEXO. For analytical purposes, a very well resolved diffusion‐controlled voltammetric peak was obtained in Britton‐Robinson buffer at pH 7.0 with 20% constant amount of methanol for DPV and SWV techniques. The linear response was obtained in supporting electrolyte in the ranges of 1.0×10^?6–2.0×10^?4 M with a detection limit of 6.6×10^?9 M and 5.76×10^?8 M and in serum samples in the ranges of 2.0×10^?6–1.0×10^?4 M with a detection limit of 8.08×10^?8 M and 4.97×10^?8 M for differential pulse and square wave voltammetric techniques, respectively. Only square wave voltammetric technique can be applied to the urine samples, and the linearity was obtained in the ranges of 2.0×10^?6–1.0×10^?4 M with a detection limit of 2.00×10^?7 M. Based on this study, simple, rapid, selective and sensitive two voltammetric methods were developed for the determination of FEXO in dosage forms and biological fluids. For the precision and accuracy of the developed methods, recovery studies were used. The standard addition method was used for the recovery studies. No electroactive interferences were found in biological fluids from the endogenous substances and additives present in tablets.     

Stripping voltammetry of manganese based on chelate adsorption at the hanging mercury drop electrode

A novel electrochemical stripping approach for the trace measurement of manganese is presented. The metal chelate with erichrome black T is adsorbed on a hanging mercury drop electrode, and the subsequent reduction current of the accumulated chelate is measured by voltammetry. Adsorptive preconcentration for 5 min results in a detection limit of 6 × 10^?10 M (32 l^?1). Cyclic voltammetry is used to characterize the redox and interfacial processes. Optimal experimental conditions include a 0.02 M piperazine-N,N′-bis(2-ethanesulfonic acid) solution (pH 12) containing 1 × 10^?6 M eriochrome black T, a preconcentration potential of ?0.80 V, and a linear potential scan. The response is linear up to 2.9 × 10^?7 M, and the relative standard deviation at 1.8 × 10^?7 M is 1.5%. The effects of possible interferences from metal ions or organic surfactants are evaluated.     

Indirect Differential Pulse Voltammetric Determination of Aluminum Biological Samples in the Presence of 3, 4-Dihydroxyphenylalanine

ABSTRACT

Indirect differential pulse voltammetric (DPV) determination of aluminum in the presence of 3, 4-dihydroxyphenylalanine (L-dopa) with glass carbon electrode as working electrode has been described. The method relies on the decrease of DPV anodic peak current of L-dopa with the addition of Al^III The decreasing value of the peak current is linear with the increase of Al^III concentration. Under the optimum experimental conditions (pH 4.8, 6×10^?4 M L-dopa, 0.06M NaAc - HAc ¹buffer solution), the linear ranges are 4.0×10^?7 - 5.2×10^?6 M and 7.2×10^?6 - 4.5×10^?5 M. The relative standard deviation for 8×10^?6 M aluminum is 1.0% (n = 8) and the detection limit is 3.5×10^?7 M. A number of foreign species for interference have been studied. The method has been applied to determine aluminum in drinking water, synthetic renal dialysate and urine samples.