Electrochemical sensor for estriol hormone detection in biological and environmental samples

A stable conducting film for sensing using reduced graphene oxide (RGO), gold nanoparticles (GNPs), and potato starch (PS) is proposed. The characterization of the nanomaterials was obtained by ultraviolet and visible spectroscopy, dynamic light scattering, zeta potential, Fourier transform infrared spectroscopy, atomic force microscopy, and cyclic voltammetry. The voltammetric behavior of the RGO-GNPs-PS/GCE electrodes was studied in the presence of estriol and the results showed a high anodic peak current at 0.64 V. Under optimal conditions, an analytical curve was obtained, in which the anodic peak estriol was linear in the range from 1.5 to 22 μmol L^?1, with a detection limit of 0.48 μmol L^?1. The modified electrodes were applied for determination of estriol in environmental and biological samples. The proposed electrode was used for estriol determination in water and urine samples, which presented a recovery range from 92.1 to 106%, showing that RGO-GNPs-PS/GCE is a viable alternative for the detection of estriol and can be attractive for several electrochemical applications.     

生物样品中大田软海绵酸类毒素代谢规律及检测方法的研究进展

近年来,中国赤潮污染日趋严重,因此引发多起贝类毒素中毒事件,威胁消费者的食用安全。大田软海绵酸（okadaic acid,OA）及其衍生物鳍藻毒素（dinophysistoxins,DTXs）是分布最广、危害最大的一类腹泻性贝类毒,具有急性腹泻毒性及多种慢性毒性。建立生物体液样品中OA类毒素残留的检测方法对辅助诊断患者的中毒情况极为必要。文章简要介绍了OA类毒素的理化性质、中毒事件、毒理作用,并详细总结了生物样品中OA类毒素代谢规律及检测方法的研究进展。     

Development and validation of a highly sensitive ELISA for the determination of pharmaceutical indomethacin in water samples

The development and validation of a highly sensitive and specific indirect competitive enzyme-linked immunosorbent assay (ELISA) for the detection of pharmaceutical indomethacin in water samples was presented. The immunogen and coating antigen were prepared by covalently linking indomethacin to bovine serum albumin and ovalbumin by anhydride ester method. Two rabbits were immunized by standard immunization processes and the superior antibody was characterized in terms of sensitivity, specificity, precision, accuracy and stability. Under optimal experimental conditions, the standard curve was constructed in the concentration range of 0.01-10 ng/mL. For 10 consecutive standard curves run in 2 weeks, IC₅₀ value (the concentration of analyte producing 50% of inhibition) were found within 0.10-0.25 ng/mL, and the detection limit (DL) at a signal-to-noise ratio of 3 (S/N = 3) was about 0.01 ng/mL. The antiserum recognized acemetacin, a precursor of indomethacin with 92.3% cross-reactivity, while the cross-reactivity values of antiserum with other tested compounds were very low. From the spiking experiments, the recoveries were found within 98-123%. The ELISA was applied for the determination of indomethacin in different water samples and the results were confirmed by conventional HPLC. The correlation coefficient of 0.988 was obtained, demonstrating a good correlation of ELISA with HPLC.     

Intralaboratory validation of cell-free translation assay for detecting ricin toxin biological activity

A cell-free translation (CFT) assay for determining ricin biological activity was validated. The statistical data from the validation study showed a high level of precision within and between runs of the assay. The assay was specific for determining ricin biological activity in food-based matrixes and discriminated ricin from other ribosome-inactivating proteins. The mean bias (relative error) between measured ricin concentrations of 3 validation samples and their nominal concentrations was 1.1, 6.6, and 20.3%, while the coefficient of variation (CV) was 14.1, 7.7, and 13.5%, respectively, demonstrating good precision, accuracy, and linearity. The CVs of ricin concentrations in 2 ricin-containing samples calculated from a dilution series were <5 and <12%, respectively, demonstrating very good parallelism. The analyte stability of ricin-containing samples stored for 1 month either at 4 or -20 degrees C, the stability of ricin stock solutions, and the results of assays executed by different analysts and using different luminometers were evaluated. The statistical validation data confirmed that the 4-parameter logistic equation, y = (a - d)/[1 + (x/c)b] + d, provided an accurate representation of a sigmoidal relationship between the measured response and the observed ricin concentration for the CFT assay.     

Direct competitive ELISA based on a monoclonal antibody for detection of aflatoxin B1. Stabilization of ELISA kit components and application to grain samples

A direct competitive enzyme-linked immunosorbent assay (ELISA) based on a monoclonal antibody has been developed and optimized for detection of aflatoxin B₁ (AFB₁), and an ELISA kit has been designed. This immunoassay was highly specific, sensitive, rapid, simple, and suitable for aflatoxin monitoring. AFB₁ concentrations determinable by ELISA ranged from 0.1 to 10 μg L⁻¹. The IC₅₀ value was 0.62 μg L⁻¹. Recovery from spiked rice samples averaged between 94 and 113%. The effect of different reagents on the stability of HRP–AFB₁ conjugate solution was studied. The performance of a stabilized enzyme tracer in ELISA was determined and compared with that of a freshly prepared control solution of HRP–AFB₁ conjugate. The results showed that stabilizing media containing 0.02% BSA, 0.1% Kathon CG, and 0.05 mol L⁻¹ calcium chloride in 0.05 mol L⁻¹ Tris-HCl buffer (pH 7.2) maintained the activity of HRP–AFB₁ at a dilution of 1:1000 for a period of at least 12 months at room temperature whereas the reference conjugate solution without the additives lost its activity within a few days. Several additives were tested for their stabilizing effect on a monoclonal antibody (MAb) immobilized on the surface of polystyrene microtitre plates. It was shown that immobilized MAb, treated with post-coating solutions containing PVA, BSA, and combinations of these substances with trehalose, retained its activity for at least 4 months at 4°C, whereas the untreated MAb-coated plate lost its activity within 2 days.     

Molecularly imprinted polymers for the clean-up of a basic drug from environmental and biological samples

A molecularly imprinted polymer (MIP) was synthesized and evaluated to selectively extract an alpha-blocker, i.e. alfuzosin, from human plasma. The synthesis of the MIP was performed in dichloromethane with methacrylic acid as monomer and the target drug as template. A first series of experiments was carried out in dichloromethane to estimate the potential of the MIP in its specific recognition medium, i.e. dichloromethane, by developing a selective procedure and by measuring the capacity of the sorbent. An optimized procedure was developed for the selective extraction of alfuzosin with a recovery close to 100% in this medium and a specific capacity of 1.3 micromol g(-1) of MIP was measured. A study in aqueous media was also carried out by a comprehensive approach of the retention mechanism in order to build a selective procedure of extraction. The effects of the amount and of the charge of cations were studied and an optimal pH value was defined to limit matrix effects. Then, the alfuzosin MIP was then directly used to selectively extract the target drug from human plasma with an extraction recovery of 60%. Lastly, a soil was extracted by a pressurized solvent and the resulting extract was cleaned up on the MIP, showing the possibility to use this selective sorbent for the sample treatment of various complex matrices.     

Methods for chromatographic determination of amanitins and related toxins in biological samples.

Methods for the chromatographic determination of amanitins, toxins of Amanita phalloides (Fr.), Link mushrooms and related toxins are reviewed; particular emphasis is given to high-performance liquid chromatographic methods. The main chemical and toxicological aspects are discussed, but the focus of the present review is on the analytical problems arising in a laboratory charged with the setting up of a procedure which can direct the appropriate clinical management of an intoxicated patient or solve a forensic case.     

离子液体在环境与生物样品分析中的应用及研究进展

离子液体作为一类安全稳定、环境友好的新型介质,因其具有别于传统挥发性有机溶剂的独特的性质,开始用于化学研究的很多领域.在分析检测中,离子液体的研究主要集中在分离富集、电化学分析与传感器、光谱与质谱等方面.本文评述了离子液体在这些领域的应用,并对其前景进行了展望.     

Development of an ultra-performance liquid chromatography-mass spectrometry method for the detection of lipophilic marine toxins

A rapid method for the detection of marine toxins was developed using an ultra-performance liquid chromatography (UPLC) system coupled to a latest generation mass spectrometry (MS) system. The analysis of 21 lipophilic marine toxins was achieved on an Acquity C18 column using a water-acetonitrile gradient with a cycle time of 6.6 min, reducing analysis time by more than a factor two compared to HPLC while maintaining peak resolution. Linear ranges, limits of detection and limits of quantification were established for okadaic acid (OA), pectenotoxin-2, azaspiracid-1 (AZA1), yessotoxin, gymnodimine and 13-desmethylspirolide C. The method was found to be accurate when using a triplicate methanolic extraction. Matrix effects were assessed by standard addition of OA and AZA1 in extracts of raw and heat-treated flesh of mussels and oysters. For the analysis of AZA1, the UPLC-MS method was always prone to signal suppression, while for OA analysis signal suppression was observed in extracts of raw shellfish flesh and signal enhancement in extracts of heat-treated flesh. Matrix effects occurring in the method presented are diminished compared to previous studies.     

Analytical methodology for speciation of arsenic in environmental and biological samples

A literature search on the speciation of arsenic in environmental and biological samples shows an increasing interest of many researchers in the subject. Because of the low level of arsenic species in real samples, many problems related with its speciation remain unresolved: species instability during sampling, storage and sample treatment, incomplete recovery of all species, matrix interferences, lack of appropriate certified reference materials and of sensitive analytical methods, etc. These aspects are underlined in this paper. The continued development of new analytical procedures pretending to solve some of these problems claim for an up-to-date knowledge of the recent publications. Therefore, this paper pretends to review the latest publications on the chemical speciation of arsenic, emphasizing the increasing activity in the development of accurate and precise analytical methods. In most of the cases, separation and preconcentration is necessary, followed by element-specific detection for sensitivity improvement. Hydride generation following separation procedures (e.g., ion-exchange or high performance liquid chromatography) coupled to atomic absorption or atomic emission detectors proved to have sufficient sensitivity to monitor arsenic exposure, although restricts the analysis to hydride-forming species. Modified procedures including some kind of heating in the presence of highly oxidizing agents have proved successful to completely decompose the arsenic containing compounds to arsenate and so to extend the range of compounds which can be determined by these methods. On-line arrangements have the additional advantage of avoiding excessive sample handling, although some of them involve numerous steps and others are too costly to be recommended for routine use. The analytical figures of merits, specially detection limits are given for most of the methods in order to afford comparison and judge possible applicability. These studies, which have been approached in many different ways, would lead to knowledge that are determinant in the understanding of the cycle of this element in environment and of its physiological and toxicological behavior in the living organisms.     

Development and validation of polymerized high internal phase emulsion monoliths coupled with HPLC and fluorescence detection for the determination of trace tetracycline antibiotics in environmental water samples

A polymerized high internal phase emulsion monolith was used as a novel sorbent for solid‐phase extraction coupled with high‐performance liquid chromatography and fluorescence detection for the determination of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline in environmental water samples. The polymerized high internal phase emulsion monolithic column was prepared by the in situ polymerization of the continuous phase of a high internal phase emulsion containing glycidyl methacrylate, styrene, and divinylbenzene in pipette tips, and then functionalized with iminodiacetic acid. The resulting monolith exhibited highly interconnected porosity and large surface areas, making it an excellent candidate as an solid‐phase extraction sorbent for the enrichment of trace tetracycline antibiotics. Several factors affecting the extraction performance of polymerized high internal phase emulsion monoliths, including the pH of sample solution, the eluting solvents, the sample loading flow rate and volume, were investigated, respectively. Under the optimized conditions, the mean recoveries of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline spiked in pond and farm wastewater samples ranged from 78.1 to 119.3% with relative standard deviation less than 15%. The detection limits (S/N = 3) of the proposed method were in the range of 51–137 pg/mL. This study demonstrated that the monolithic polymerized high internal phase emulsion would be promising solid‐phase extraction sorbents in the extraction and proconcentration of trace analytes from complex samples.     

Improved capillary electrophoretic separation of nine (fluoro)quinolones with fluorescence detection for biological and environmental samples

A capillary electrophoretic method has been developed for the separation of nine (fluoro)quinolones. Detection is done by fluorescence measurement with broad wavelength band excitation between 240 and 400 nm. Best separation is achieved in a carrier electrolyte containing 50 mM H3PO4 adjusted to pH 7.55-acetonitrile (60:40, v/v). Detection limits are in the low microgl(-1) range. The suitability to real samples has been demonstrated by analyzing blood samples and surface water samples. Sample preconcentration and sample clean-up can easily be done by solid-phase extraction. Different phases based on alkyl- or phenyl-modified silica as well as on polymers have been investigated for this purpose. The method should also be useful for determination of residues of (fluoro)quinolones in food or other matrices.     

Development of an on-line preconcentration system for zinc determination in biological samples

An on-line preconcentration system for zinc determination in 24-h urine, blood plasma and erythrocyte matrices by flame atomic absorption spectrometry (FAAS) was used. This procedure was based on adsorption of Zn(II) ions onto a minicolumn filled with silica gel, chemically modified with niobium(V) oxide (Nb₂O₅-SiO₂). The determination of the optimum conditions for Zn(II) preconcentration was done using two-level full factorial and Doehlert designs. In the optimization procedure, four variables (sample pH, eluent concentration, sample flow rate and eluent flow rate) were investigated. The results obtained from the full factorial design demonstrated that the sample pH and sample flow rate variables, and their interactions, were statistically significant. A Doehlert matrix was used in order to determine the optimum conditions for the sample pH and sample flow rate. The optimized conditions for sample pH and flow rate sampling were 6.6 and 7.1 ml min⁻¹, respectively, to obtain the maximum Zn(II) preconcentration and determination in the biological samples studied. Parameters of analytical curve, precision, effect of other ions in the proposed system and accuracy were achieved to assess the proposed method. The accuracy was confirmed by analysis of certified reference materials (urine Seronorm™ Trace Elements) and recovery tests in blood plasma and erythrocyte samples. Detection limit (3σ/S) of 0.77 μg l⁻¹, precision (calculated as relative standard deviation) of 1.5% for Zn(II) concentration of 10 μg l⁻¹ (n = 7) and a sampling frequency of 27 samples/h were obtained from the proposed system.     

A method for the determination of tritium distribution in environmental and biological samples

A method for the determination of the tritium distribution in environmental and biological samples is described. Tritium as HTO is removed by freeze-drying and the residue is combusted to obtain organically bound tritium. Each tritium fraction is electrolytically enriched and determined by liquid scintillation spectrometry. Enrichment and large sample sizes are required due to the low environmental tritium levels. During the analyses of more than 600 samples over a two-year period all aspects of the method (freeze-drying, combustion, enrichment and counting) have provided reproducible and precise results.     

Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L^–1 in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS–MS) in electron-impact (EI) mode. The targeted estrogens included 17- and 17-estradiol (aE2, bE2), estrone (E1), and 17-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium – The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L^–1. aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.Presented at the 9th FECS Conference on Chemistry and the Environment, Bordeaux, France, 29 August–1 September 2004     

Development and characterization of an immunoaffinity monolith for selective on-line extraction of bisphenol A from environmental water samples

Matrix interference and contamination from analytical procedures are two major issues in the detection of trace level of bisphenol A (BPA) in environmental water. In this paper, we report a highly selective and efficient method for on-line extraction of BPA from water samples followed by quantification with liquid chromatography–electrospray ionization tandem mass spectrometry (LC–ESI/MS/MS). Poly(ethylene dimethacrylate-glycidyl methacrylate) monolith was synthesized in 50 mm × 4.6 mm i.d. stainless steel cartridges and the epoxy-groups on the surface of the monolith were hydrolyzed and oxidized to aldehyde functions. Antibodies against BPA were covalently immobilized onto the monolithic column via Schiff base reaction. The optimum application buffer and elution buffer were found to be pH 5.5 phosphate buffered saline (PBS) and methanol–water (70:30, v/v), respectively. The obtained immunoaffinity monolithic columns were on-line coupled to LC–MS/MS using column-switching valves and the system was applied to analyze BPA in real environmental water samples. The method achieved a detection limit of 0.3 ng L⁻¹ using a sample volume of 100 mL. The linear calibration range was 1.0–160 ng L⁻¹. Samples including tap water, lake water and effluent from municipal sewage treatment plant were all measured with satisfactory results.     

Handling of environmental and biological samples via pre-column technologies

Sample handling is still a weak point in chromatography and in analytical chemistry in general. One consideration is the automation potential of new procedures. Solid-liquid extraction techniques in combination with pre-column technology are particularly promising in this regards. The construction and geometry of pre-columns both for conventional and narrow-bore HPLC are of major importance, since band broadening should be kept at a minimum for an optimal functioning of the analytical system. The various operations that can be carried out with such a pre-column are trace-enrichment, clean-up of the sample which depends on the type of adsorbents used in the precolumn, i.e., polar or apolar materials, ion exchangers or metal covered surfaces, etc., protection of the analytical column, field sampling and storage of samples and as a substrate for on-column chemical derivatizations. These various operations are demonstrated with practical examples from the fields of environmental and biological analysis. The selectivity can be further enhanced by coupling pre-column technology with selective detection models such as diode array UV, electrochemical or fluorescence detection. This enables the construction of optimal and integrated analysis systems which are fully automated and microprocessor controlled. They can also be made compatible with miniaturized LC-technology.     

Immunoassay for the detection of lead ions in environmental water samples

A rapid, simple, and reliable competitive immunoassay was developed for measurement of lead ions Pb(II) in environmental samples. Avian antibodies were produced against Pb(II). Since lead ions are too small to elicit an immune response, the metal was coupled to protein carrier Bovine serum albumin (BSA) using a bifunctional chelator 1-(4-isothiocyanobenzyl) ethylenediamine N,N,N′,N′-tetra acetic acid (ITCBE). Poultry birds (layers) were immunised with this Pb(II)–ITCBE–BSA immunoconjugate and the avian antibodies (IgY) isolated from egg yolk recognised Pb(II)-ITCBE complexes as capture reagent and a Pb(II)–ITCBE conjugate of Alkaline phosphatase as an enzyme label. Antibody reaction was optimised for different concentrations of antigen and antibody dilutions. Cross reactivity with other metals were below 1% in competitive ELISA. The IC₅₀ value of this avian antibody was 0.19?µg?mL^?1. The detection range and the detection limit were 0.02–1000?µg?mL^?1and 0.2?µg?mL^?1, respectively.     

Interlaboratory validation of the Vidas SET2 kit for detection of staphylococcal enterotoxins in milk products

An earlier intralaboratory validation study based on the EN ISO 16140 Standard conducted by the Community Reference Laboratory for coagulase-positive staphylococci including Staphylocococcus aureus showed that, after an extraction step using dialysis concentration, the Vidas SET2 detection kit could be used to screen staphylococcal enterotoxins in milk and milk products. In order to fully validate Vidas SET2, an interlaboratory study was organized. Six freeze-dried samples and 3 ready-to-use concentrated extracts were analyzed by 21 laboratories according to the method, including a detection with Vidas SET2. Results did not show false-positive or -negative results. Accordance and concordance parameters were equal to 100%, corresponding to a concordance odds ratio of 1. This interlaboratory study confirmed the satisfactory outcome of the preliminary tests and of the intralaboratory study performed previously. The Vidas SET2 detection kit can be used as a method for the detection of staphylococcal enterotoxins in milk and milk products as well as the Transia Plate SET detection kit in the European screening method for official control purposes, after an extraction step followed by dialysis concentration.     

The analysis of biological and environmental samples for lead by photon activation

Résumé On utilise le réaction photonucléaire²⁰⁴Pb(γ, n)²⁰³Pb pour doser le plomb dans des échantillons issue de milieux biologiques et de l'environment. En utilisant des échantillons déjà titrés en plomb par d'autres méthodes, on a jugé la précision des mesures convenable. En utilisant une séparation chimique soignée après l'irradiation, la quantité limite détectée est de l'ordre d'une dizaine de nanogrammes.