Determination of lewisite metabolite 2-chlorovinylarsonous acid in urine by use of dispersive derivatization liquid-liquid microextraction followed by gas chromatography–mass spectrometry

The purpose of this study was to develop a sensitive and simple method, based on dispersive derivatization liquid-liquid microextraction–gas chromatography–mass spectrometry (DDLLME–GC–MS) in scanning and selected-ion-monitoring (SIM) modes, for detection of 2-chlorovinylarsonous acid (CVAA) as a hydrolysis product and urinary metabolite of lewisite in urine samples. Chloroform (65 μL), methanol (500 μL), and ethanedithiol (10 μL) were used as extraction solvent, dispersive solvent, and derivatizing reagent, respectively. Critical conditions of the proposed method were optimized. The nucleophilic reactions of dithiol and monothiol compounds with CVAA were also studied using a competitive method. In view of the high affinity of trivalent arsenic for sulfhydryl groups, the interaction between CVAA and bis(2-chlorovinyl)arsonous acid (BCVAA) and free cysteine (Cys) was also investigated using liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS). The interference of Cys, present in human urine, with the detection of CVAA was evaluated using dithiol and monothiol chemicals as derivatization agents. The developed method provided a preconcentration factor of 250, and limits of detection of 0.015 and 0.30 μg L^?1 in SIM and scanning modes, respectively. The calibration curves were linear over the concentration range of 1–400 μg L^?1 in full-scan mode. The relative standard deviation (RSD) values were calculated to be 5.5 and 3.2 % at concentrations of 20 and 100 μg L^?1, respectively. Collision-induced dissociation studies of the major electron-impact (EI) ions were performed to confirm the proposed fragment structure of CVAA-dithiols derivatives. Results indicated that the developed method for analysis of CVAA is suitable not only for verification of human exposure to lewisite, but also for quantification of CVAA in urine samples.

Hydride Generation Atomic Fluorescence Spectrometric Determination of Ultratrace Arsenic in High Purity Indium Oxide

A simple, sensitive, and interference free method was proposed for the determination of total arsenic in high purity indium oxide by hydride generation atomic fluorescence spectrometry (HG-AFS). Preconcentration was carried out by distillation of volatile arsenic trichloride. Hydrazine sulfate was used as a prereductant to reduce As (V) to As (III). The volatile arsenic trichloride generation was based on the reaction between As (III) and hydrochloric acid, and vapors were absorbed with water. The method provides a linear response range of 2 ng/mL–70 ng/mL, a detection limit of 0.1 ng/mL, a recovery of 96%–113%, and an average relative standard deviation of 2.42%. The method was validated by means of interlaboratory comparative analysis with the proposed method HG-AFS, and the comparison of data by using proposed method HG-AFS and reference methods of ICP-OES and spectrophotometry.     

On-line solid phase extraction coupled to ICP-OES for simultaneous preconcentration and determination of some transition elements

An on-line solid phase extraction method coupled to ICP-OES was developed for the simultaneous determination of Ce(III), La(III), Sm(III), Y(III), Yb(III), Dy(III), Hf(IV), Zr(IV) and Th(IV) ions in aqueous samples. The ions forming hydrophobic complexes with 3,5,7,2?,4?-pentahydroxy flavone (morin) and were retained on an octadecyl silica (C₁₈) minicolumn. The adsorbed chelates were subsequently eluted from the column and directly transferred into the plasma with 80% (v/v) propanol:H₂O solution for the simultaneous determination of the metal ions. Different parameters affecting the ICP-OES signal intensities and extraction efficiency including pH of the solution, concentration of the chelating agent, flow rate and type of the eluent, loading rate and ionic strength were evaluated and optimized. The calibration graphs were linear in the range of 0.2–100 μg L^?1 and limit of detections for the extraction and determination of the ions in the aqueous sample (25 mL) were in the range 0.10–0.46 μg L^?1. The enhancement factors of the method for the metal ions obtained were in the range of 23 to 242 (V _Sample?=?25 mL) and the precision expressed as relative standard deviations (RSD %) was below 6.9%. Finally, the method was successfully applied to determine the target analytes in natural water samples.     

Spectrophotometric determination of Hg(II) in water samples by dispersive liquid liquid microextraction with use ionic liquid after derivatization with a water soluble Fe(II) phthalocyanine

This study reports the synthesis of water soluble iron(II) phthalocyanine and a facile method for spectrophotometric determination of Hg(II) in environmental water samples by ionic liquid based dispersive liquid–liquid microextraction (IL-DLLME). In the method, 1-heptyl-3-methylimidazolium hexafluorophosphate (250 µL) as extraction solvent, acetonitrile (750 µL) as dispersive solvent and Triton X-100 (200 µL) as anti-sticking agent were used. After the extraction of the Hg(II) complex (Hg(II):q-Fe(II)-Pc) into thin droplets of ionic liquid, the sample was centrifuged for 4 min at 2000 rpm. The upper aqueous phase was removed and the residue diluted to 250 µL with methanol and transferred to a 250 µL cell for spectrophotometric detection at 280 nm. The linear range of the method is 0.05–1 µg/mL. The limits of detection and quantification is 0.01 and 0.03 µg/mL, respectively. The RSD for the developed method was calculated as 0.78% at 0.50 µg/mL Hg(II).     

Effervescence-assisted dispersive liquid-liquid microextraction based on deep eutectic solvent for preconcentration and FAAS determination of copper in aqueous samples

A new effervescence-assisted dispersive liquid-liquid microextraction, EA-DLLME, technique was developed for preconcentration and flame atomic absorption spectrometric determination of copper in aqueous samples. Effervescence assistance and DES combination for metal ion extraction was used for the first time. In the presented study, six different effervescence powders were examined to achieve maximum extraction efficiency. In addition, 1,5 diphenyl carbazide was used as complexing agent and DES prepared by mixing choline chloride and phenol was used as extraction solvent. The effect of several parameters such as pH, concentration of complexing agent, composition and volume of DES, amount of THF, composition and amount of effervescent agent were examined. Performed experiments showed that optimum pH was 6.0, the best effervesce powder composition was NaH₂PO₄:Na₂CO₃ with 2 × 10^?3:1 × 10^?3 molar ratio and the amount of effervesce powder was 0.4 g. Under optimum conditions enhancement factor, limit of detection and limit of quantification were calculated as 78, 2.9 and 9.7 μg L^?1, respectively. In addition, to prove precision of the method intra-day relative standard deviations were calculated for 10 and 50 μg L^?1 Cu²⁺ concentrations and found as 2.1% and 1.3%, respectively. The proposed method showed good linearity within the range of 10.0–100 μg L^?1. Finally, proposed method was successfully applied to determination of copper traces in aqueous samples.     

Analysis of Glycocholic Acid in Human Plasma and Urine from Hepatocellular Carcinoma Patients

Glycocholic acid (GCA) has been identified as endogenous biomarker for hepatocellular carcinoma (HCC). To dissolve protein and liberate GCA from protein, ionic liquids (ILs) that contain chaotropic ions were used for pretreatment of liquid biological samples. Coupling with solid-phase extraction (SPE) and reversed-phase high-performance liquid chromatography (RP-HPLC), the novel sample pretreatment method was applied for quantitative determination of GCA in urine and plasma samples. Compared with the traditional organic solvents pretreatment of biological samples, the proposed method is “greener” and simpler, due to no use of volatile organic solvent, and avoiding centrifugation. Under the optimal conditions, when the GCA-free urine and plasma samples were spiked with GCA at 0.05–1.0 and 0.2–10 μmol L^?1, the recoveries of GCA ranged between 95.8–101.6 and 96.9–100.4%, respectively. These procedures only required 1 mL of urine and 3 mL of 3 mM ILs aqueous solution and 100 μL of plasma and 4 mL of 2 mM ILs aqueous solution, respectively. The proposed method has been successfully validated on a small sample size of 14 HCC patients and 14 healthy volunteers. For HCC patients, the mean concentration of GCA was 24.79 ± 6.86 and 31.98 ± 11.12 μmol L^?1 in urine and plasma samples, and was about 3 times and 24 times as much as in healthy people, respectively. The proposed method opens up a new possibility in early diagnosis of HCC.     

Ionic liquid-based dispersive liquid–liquid microextraction for determination of trace amounts of iron in water, rock and human blood serum samples

A green and sensitive dispersive liquid-phase microextraction procedure based on room-temperature ionic liquid (1-hexyl-3-methylimidazolium hexafluorophosphate) for preconcentration and determination of total iron in real samples prior to flame atomic absorption spectrometry was developed. 2-Mercaptopyridine-N-oxide (pyrithione) and ethanol were used as complexing agent and dispersive solvent in the proposed method, respectively. The factors influencing the extraction were optimized. Under optimum conditions, the enhancement factor of 15 was obtained from only 11.35 mL of aqueous phase. The linear dynamic range and the detection limit were 10.0–700 and 2.4 μg L^?1, respectively. The relative standard deviation (RSD) for ten replicate measurements of 500 μg L^?1 of iron is 3.1 %. The developed method has been successfully applied for the determination of iron in water samples, human blood serum and rock certified reference material with high efficiency.     

Simultaneous Derivatization and Dispersive Liquid–Liquid Microextraction for Fatty Acid GC Determination in Water

Simultaneous derivatization and dispersive liquid–liquid microextraction technique for gas chromatographic determination of fatty acids in water samples is presented. One hundred microlitre of ethanol:pyridine (4:1) were added to 4 mL aqueous sample. Then a solution containing 0.960 mL of acetone (disperser solvent), 10 μL of carbon tetrachloride (extraction solvent) and 30 μL of ethyl chloroformate (derivatization reagent) were rapidly injected into the aqueous sample. After centrifugation, 1 μL sedimented phase with the analytes was analyzed by gas chromatography. The effects of extraction solvent type, derivatization, extraction, and disperser solvents volume, extraction time were investigated. The calibration graphs were linear up to 10 mg L^?1 for azelaic acid (R ² = 0.998) and up to 1 mg L^?1 for palmitic and stearic acids (R ² = 0.997). The detection limits were 14.5, 0.67 and 1.06 μg L^?1 for azelaic, palmitic, and stearic acids, respectively. Repeatabilities of the results were acceptable with relative standard deviations (RSD) up to 13%. A possibility to apply the proposed method for fatty acids determination in tap, lake, sea, and river water was demonstrated.     

Amperometric Determination of Cholesterol-Reducing Drug,Ezetimibe, Using Glassy Carbon Electrode Modified with Multiwalled Carbon Nanotubes and Sodium Dodecylsulfate

A simple and sensitive electrochemical method is described for the determination of the cholesterol-reducing drug ezetimibe in aqueous solution. A glassy carbon electrode, modified with multiwalled carbon nanotubes and sodium dodecylsulphate was used as the working electrode. Ezetimibe yields a well-defined anodic peak at the surface of the electrode in an aqueous solution of pH 13. A linear amperometric calibration curve was obtained in the range of 1.2–78 μM (0.5–32.0 μg/mL) of ezetimibe, with a sensitivity of 88.6 nA/μM and a detection limit of 300 nM (0.12 μg/mL). The sensor was applied successfully to the determination of ezetimibe in pharmaceutical preparations.     

On-Line Flow-Injection Chemiluminescence Determination of Bovine Serum Albumin Using Surfactant-Enhanced Dichlorofluorescein-Hypochlorite System

A flow injection technique combined with a chemiluminescence method was established for the determination of bovine serum albumin (BSA). Strong chemiluminescence was observed when BSA-dichlorofluoresce (DCF) complex was oxidized by sodium hypochlorite (NaClO) in an alkaline medium and in the presence of cetyltrimethylammonium bromide (CTAB). The reaction conditions of the chemiluminescence were carefully optimized. Under the optimal conditions, the method had a linear range of 0.01–20.0 μg/mL, with a detection limit of 0.007 μg/mL for BSA (3σ). The relative standard deviation of 1.0 μg/mL BSA (n = 8) is 1.4%. The method was applied to determine BSA in milk samples and it worked well.     

Hexafluoroisopropanol-induced coacervation in aqueous mixed systems of cationic and anionic surfactants for the extraction of sulfonamides in water samples

Hexafluoroisopropanol (HFIP)-induced coacervation in aqueous mixed systems of catanionic surfactants of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) was described in detail, and its application in the extraction of strongly polar sulfonamides (SAs) was investigated. With 10 % (v/v) HFIP inclusion, coacervation formation and two-phase separation occur in a wide range of SDS/DTAB mole ratios (88:12～0:100 mol/mol) and total surfactant concentrations (10～200 mmol/L). The interactions between HFIP and DTAB play an important role in coacervation formation. The HFIP-induced SDS–DTAB coacervation extraction proves to be an efficient method for the extraction and preconcentration of SAs. Both hydrophobic interaction and polar interactions (hydrogen–bond, electrostatic, and π-cation) contribute to the distribution of SAs into coacervate phase. The proposed HFIP-induced SDS–DTAB coacervation extraction combined with HPLC–UV was employed for the extraction and quantitative determination of SAs in environmental water samples. Limits of detection were 1.4～2.5 ng mL^?1. Excellent linearity with correlation coefficients from 0.9990 to 0.9995 was obtained in the concentration of 0.01～10 μg mL^?1. Relative recoveries were in the range of 93.4～105.9 % for analysis of the lake, underground, and tap water samples spiked with SAs at 0.01, 1.0, and 10 μg/mL, respectively. Relative standard deviations were 0.7～3.2 % for intraday precision and 1.3～4.6 % for interday precision (n?=?3). Concentration factors were 17～49 for three water samples spiked with 0.01 μg/mL SAs. The results demonstrate that the proposed extraction method is feasible for the preconcentration and determination of trace SAs in real water samples. Graphical abstract

?     

Simultaneous determination of inorganic As(III), As(V), Sb(III), Sb(V), and Se(IV) species in natural waters by APDC/MIBK-NAA

A solvent extraction preconcentration as well as separation method involving ammonium pyrrolinedithiocarbamate (APDC) and 4-methyl-2-pentanone (MIBK) in conjunction with neutron activation analysis (NAA) was developed for the simultaneous measurement of low levels of inorganic arsenic, antimony and selenium species in natural waters. Several critical factors affecting the APDC/MIBK-NAA method were studied in detail including the selection of chelating agent, solvent, aqueous pH for the extraction of six species as well as a few organoarsenic species as representatives for organic species, the stability of the complexes in organic phase, phase volume ratios for extraction and back-extraction steps, and the reduction of the species from higher to lower oxidation state. The detection limits for arsenic, antimony and selenium were found to be as low as 0.026, 0.010 and 0.12 μg L^?1, respectively. Trace amounts of As(III), As(V), Sb(III), Sb(V), and Se(IV) in different types of natural water sample and two water certified reference materials were measured using the APDC/MIBK-NAA method.     

A Sensitive Method for Methyl tert-Butyl Ether Analysis in Water Samples by a New HS-SPME Vial and GC

In this study, a new sample vial has been designed for the extraction and determination of methyl tert-butyl ether (MTBE) in water samples by headspace solid-phase microextraction method. The special feature of this new vial is cooling the HS above the aqueous sample by cold water stream for maximum analyte absorption on SPME fiber coating. The analysis was by a gas chromatograph equipped with flame ionization detector and a capillary column (CP-sil 13 CB). Some significant variables affecting the extraction procedure were optimized. By use of divinylbenzene/carboxen/polydimethylsiloxane fiber, a sample volume of 10 mL, stirring rate of 1,000 rpm, salt concentration of 24%, extraction time of 15 min and extraction temperature of 83 °C, detection limit of 0.022 μg L^?1 and a good linearity (R ² = 0.998) in a calibration range of 0.1–400 μg L^?1 were achieved. The relative standard deviation for triplicate runs ranged between 6 and 8%. The method could be applied to the analysis of trace levels of MTBE in various water samples.     

Gas-Chromatographic Separate Determination of Trace β-Chlorovinylarsonous Dichloroanhydride (Lewisite) and Anhydride (Lewisite Oxide) in Soil and Construction Materials

A method was proposed for the separate gas-chromatographic determination of β-chlorovinylarsonous dichloroanhydride (lewisite) and anhydride (lewisite oxide) in samples of soil and construction materials. Because of the absence of regulations for the maximum permissible concentration (MPC) of lewisite and lewisite oxide in construction materials (concrete, bricks, facing tile, etc.), the MPC level of lewisite in soil (0.1 mg/kg) was taken as the maximum permissible concentration in the development of the method for their determination in the above samples. The method is based on the solid-liquid extraction converting lewisite and lewisite oxide into components that can be separated at the stage of blowing-out the extractant in an inert gas flow and their subsequent conversion into acetylene with a 30% aqueous solution of sodium hydroxide and the chromatography of the vapor phase with flame-ionization detection. The error in the determination is no larger than ±20 rel %. The time of analysis is within 1.5 h.     

Direct spectrophotometric determination of ruthenium in aqueous streams of nuclear reprocessing

A fiber optic aided spectrophotometric technique has been developed for determination of ruthenium in nitric acid medium. The developed method is simple, accurate and applicable to aqueous streams of nuclear reprocessing. The system obeys Lambert–Beer’s law at 468 nm in the concentration range of 30–360 μg/mL of ruthenium. The molar absorption coefficient, detection limit and Sandell’s sensitivity are 68.477 L Mol^?1 cm^?1, 31 μg/mL and 0.0124 μg/cm² respectively. Relative standard deviation was less than 2 % and correlation coefficient was 0.9998. The results obtained by the developed procedure are in good agreement with those obtained by the standard ICP-OES method. Fission products like zirconium and strontium are not interfering. Uranium is interfering and needs prior separation by solvent extraction method. The developed method is adaptable for remote operation and on-line monitoring.     

Development of ultrasound-assisted emulsification solidified floating organic drop microextraction for determination of trace amounts of iron and copper in water, food and rock samples

A simple and efficient liquid-phase microextraction technique was developed using ultrasound-assisted emulsification solidified floating organic drop microextraction combined with flame atomic absorption spectrometry, for the extraction and determination of trace amounts of iron and copper in real samples. 2-Mercaptopyridine n-oxide was used as chelating agent and 1-dodecanol was selected as extraction solvent. The factors influencing the complex formation and extraction were optimized. Under optimum conditions, an enrichment factor of ~13 was obtained for both iron and copper from only 6.7 mL of aqueous phase. The analytical curves were linear between 40–800 and 20–1,200 μg L^?1 for iron and copper respectively. Based on three SD of the blank, the detection limits were 8.6 and 4.1 μg L^?1 for iron and copper respectively. The relative SDs for ten replicate measurements of 500 μg L^?1 of metal ions were 2.9 and 1.2 for iron and copper respectively. The proposed method was successfully applied for determination of iron and copper in environmental waters and some food samples including chess, rice, honey and powdered milk. Finally, method validation was made using rock certified reference material. A student’s t test indicated that there was no significant difference between experimental results and certified values.     

Quantification of five neonicotinoids in human urine by modified QuEChERS with isotope dilution mass spectrometry: a preliminary study for the development of certified reference material

ABSTRACT

A study for the quantification method of neonicotinoid pesticides (Neos) in human urine that aims to develop the certified reference material (CRM) in the future was carried out. A modified Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method based on dispersive solid phase extraction (d-SPE) with isotope dilution mass spectrometry (IDMS) was evaluated for the quantification of five Neos (acetamiprid, dinotefuran, imidacloprid, thiacloprid and thiamethoxam) in human urine control by optimisation of the extraction solvent, and the type and amount of d-SPE material. Two types of human urine controls (sample A and B) containing 5 μg/kg and/or 25 μg/kg of Neos were prepared and employed for this study. The results of spike test using sample A (2 mL) obtained by modified QuEChERS method with acetone extraction (10 mL) and d-SPE using a strong cation exchanger (silica gel modified with benzenesulphonic acid phase, SCX) 500 mg were as follows: 97.8%–103.1% for 5 μg/kg and 97.2%–102.7% for 25 μg/kg (described as percentage by the quantification results of IDMS relative to the spiked amount of pesticides). These results were comparable to those by SPE cartridge method using SCX functionalised hydrophilic styrene divinylbenzene (PCX). The repeatabilities of the analyses, represented as relative standard deviations, were also comparable for spike level 5 μg/kg and 25 μg/kg of Neos: 0.1%–7.2% for modified QuEChERS with IDMS and 0.2%–5.6% for PCX cartridge method. The results of spike test using sample B for a spike level 5 μg/kg were 96.0%–100.6%. These results indicate that modified QuEChERS method with IDMS can be used for the development of certified reference material and has the potential to use for the quantification of Neos in real human urine.     

A Sensitive Method for Methyl tert-Butyl Ether Analysis in Water Samples by a New HS-SPME Vial and GC

In this study, a new sample vial has been designed for the extraction and determination of methyl tert-butyl ether (MTBE) in water samples by headspace solid-phase microextraction method. The special feature of this new vial is cooling the HS above the aqueous sample by cold water stream for maximum analyte absorption on SPME fiber coating. The analysis was by a gas chromatograph equipped with flame ionization detector and a capillary column (CP-sil 13 CB). Some significant variables affecting the extraction procedure were optimized. By use of divinylbenzene/carboxen/polydimethylsiloxane fiber, a sample volume of 10 mL, stirring rate of 1,000 rpm, salt concentration of 24%, extraction time of 15 min and extraction temperature of 83 °C, detection limit of 0.022 μg L⁻¹ and a good linearity (R ² = 0.998) in a calibration range of 0.1–400 μg L⁻¹ were achieved. The relative standard deviation for triplicate runs ranged between 6 and 8%. The method could be applied to the analysis of trace levels of MTBE in various water samples.

     

Preconcentration and spectrophotometric determination of trace amount of formaldehyde using hollow fiber liquid-phase microextraction based on derivatization by Hantzsch reaction

Formaldehyde is known as a highly toxic compound to humans and identified as a carcinogenic substance. In this study, Hantzsch reaction was utilized for the derivatization of trace amounts of formaldehyde in aqueous samples with acetylacetone in the presence of ammonia to form an extractable colored product named 3,5-diacetyl 1,4-dihydrolutidine (DDL) and its further extraction using two-phase hollow fiber liquid-phase microextraction. The main experimental variables affecting the extraction performance were investigated and optimized. Under the optimum conditions (sample volume 12 mL; reaction temperature 70 °C; ammonium acetate buffer solution 4 mL 0.1 mol L^?1; acetylacetone 5 mL 0.15 mol L^?1; solvent octanol, salt concentration 20% (w/v) NaCl; pH of donor phase 7.0; stirring speed 400 rpm and extraction time 30 min), the linear dynamic range, limit of detection (LOD as 3S _b/m) and relative standard deviation (RSD %) of the proposed method were obtained as 5–250 μg L^?1 (r ² = 0.9979), 3.6 μg L^?1 and 2.5%, respectively. Finally, the applicability of the proposed method was examined, and very good results were obtained. The results confirmed the applicability of the proposed method as a versatile, low-cost and sensitive preconcentration method for determination of low concentrations of formaldehyde in aqueous solutions.     

Headspace Single Drop Microextraction for the Analysis of Fire Accelerants in Fire Debris Samples

Fire accelerants such as gasoline, kerosene, and diesel have commonly been used in arson cases. Improved analytical methods involving the extraction of fire accelerants are necessary to increase sample yield and to reduce the number of uncertain findings. In this study, an analytical method based on headspace single drop microextraction (HS-SDME) followed by gas chromatography–flame ionization detection (GC-FID) has been developed for the analysis of simulated fire debris samples. Curtain fabric was used as the sample matrix. The optimized conditions were 2.5 μL benzyl alcohol microdrop exposed for 20 min to the headspace of a 10 mL aqueous sample containing accelerants placed in 15-mL sample vial and stirred at 1500 rpm. The extraction method was compared with the solvent extraction method using n-hexane for the determination of fire accelerants. The HS-SDME process is driven by the concentration difference of analytes between the aqueous phases containing the analyte and the organic phase constituting the microdrop of a solvent. The limit of detection of HS-SDME for kerosene was 1.5 μL. Overall, the HS-SDME coupled with GC-FID proved to be rapid, simple and sensitive and a good alternative method for the analysis of accelerants in fire debris samples.