Polyelectrolyte multilayers prepared on hydrogel surfaces

Poly(vinyl alcohol) hydrogels were alternately immersed in aqueous solutions of oppositely charged polymers. The adsorption of the cationic dye methylene blue to the immersed hydrogels suggested the presence of a coating on the hydrogel surfaces. Static contact angles with an air bubble in water showed layer‐by‐layer growth of the films. The films could be transferred onto solid substrates for mechanical strength after the hydrogels were placed on the solid substrates, and this resulted in an estimation of the film thickness. The number of assembly steps could regulate the film thickness. We present here coatings of hydrogels with thin polymer films prepared by layer‐by‐layer assembly. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1062–1067, 2005     

Structure of self-assembled multilayers prepared from water-soluble polythiophenes

We have studied the structure and morphology of self-assembled polyelectrolyte multilayers prepared using poly(styrenesulfonate) (PSS) and four different cationic poly(alkoxythiophene) derivatives bearing methylimidazolium-terminated ionic side chain at the 3-position of the thiophene ring: poly(1-methyl-3-[3-[3-thienyloxy]-propyl]-1H-imidazolium) (P3TOPIM), poly(1-methyl-3-[6-[3-thienyloxy]-hexyl]-1H-imidazolium) (P3TOHIM), poly(1-methyl-3-[2-[(4-methyl-3-thienyl)oxy]-ethyl]-1H-imidazolium ) (P4Me-3TOEIM), and poly(1-methyl-3-[6-[(4-methyl-3-thienyl)oxy]-hexyl]-1H-imidazolium ) (P4Me-3TOHIM). All the multilayers exhibited regular growth. The thickness of the multilayers was measured with ellipsometry, their layer-by-layer growth was followed by polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) and ellipsometry, and the morphology of the films was studied by atomic force microscopy (AFM). The length of the methylimidazolium-terminated side chain (C(n), n = 2, 3, 6) and the substituent (H or Me) at the 4-position of the thiophene ring were varied. All multilayers were inhomogeneous in the sub-micrometer scale and contained aggregates of two kinds. The large ones with a low and constant surface number density were attributed to PSS, whereas the small aggregates were polythiophene-based. The surface density of these organic semiconducting nanoparticles greatly depended on the structure of polythiophene, being favored by polymer regioregularity and the length of the side chain. The side chains remained disordered in all the multilayers, but with polythiophenes having hexyl chains both the imidazolium and thiophene rings tended to orient themselves more perpendicular to the surface than in films containing shorter chains (C2 or C3). The relative water content of the multilayers (at 7.1% relative humidity) did not depend on the film thickness and was the lowest for P4Me-3TOHIM. As the number of bilayers increased the methylimidazolium-sulfonate ion pairs gradually weakened and became more individually hydrated.     

Capacitance and cycling stability of poly(alkoxythiophene) derivative electrodes

The functionalization of thiophene rings by electron withdrawing or electron donor groups has been widely studied, and the electrochemical and optical properties of the corresponding polymers have been extensively investigated. Given the good performance of the polyalkoxythiophenes, especially in terms of conductivity and stability of the conducting form, the present study was carried out to evaluate their stability also to repeated voltammetric cycles and their specific capacitance for their use as electrode materials in polymer supercapacitors.     

Preparation of water-soluble photoresist derived from poly(vinyl alcohol)

The reaction of PVA with 2,2-dialkoxyethoxystyrylpyridinium or quinolinium salts is described. The resultant water-soluble polymers, which contain small amounts of the styrylpyridinium- or quinolinium group, exhibited high photosensitivity. Among the polymers prepared PVA-bearing 4-oxystyrylquinolinium group was photoinsolubilized with visible light that corresponded to an argon laser.     

Model polyurethane networks prepared from poly(ethylene oxide) and poly(tetramethylene oxide)

Polyurethane elastomers of known degrees of cross-linking were prepared from hydroxylterminated poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (PTMO) chains having numberaverage molecular weights in the range 880–6820 g mol^?1. The chains were end-linked into “model” trifunctional networks using a specially prepared aromatic triisocyanate. The networks thus obtained were studied with regard to their stress-strain isotherms in both the unswollen and swollen states, in elongation at 25°, and with regard to their equilibrium swelling in benzene at 57.9°. Values of the modulus in the limit at high deformation were in good agreement with corresponding results previously obtained on trifunctional networks of poly(dimethylsiloxane) (PDMS). Since PEO has a much higher value of the plateau modulus in the uncross-linked state, this agreement indicates that inter-chain entanglements do not contribute significantly to the equilibrium modulus of an elastomeric network. These values of the high deformation modulus are also in good agreement with recent molecular theories as applied to the non-affine deformation of a “phantom” network. The swelling equilibrium results were in very good agreement with the new theory of network swelling developed by Flory.     

Photovoltaic cells based on sequentially adsorbed multilayers of conjugated poly(p-phenylene ethynylene)s and a water-soluble fullerene derivative

We describe the layer-by-layer (LBL) fabrication of multilayer films and photovoltaic cells using poly(phenylene ethynylene)-based anionic conjugated polyelectrolytes as electron donors and water-soluble cationic fullerene C60 derivatives as acceptors. LBL film deposition was found to be linearly related to the number of bilayers as monitored by UV-vis absorption. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) of the multilayer films revealed an aggregated but relatively uniform morphology devoid of any long-range phase separation. The maximum incident monochromatic photon to current conversion efficiency (IPCE) of the photovoltaic cells was 5.5%, the highest efficiency reported to date for cells fabricated by using the LBL fabrication technique, and since the thin film cells do not provide complete absorption of the incident light, the current generation per photon absorbed may be as much as 10%. The cells exhibited open circuit voltages of 200-250 mV with highest measured short circuit currents up to 0.5 mA/cm2 and fill factors around 30%. The power conversion efficiencies measured at AM 1.5 solar conditions (100 mW/cm2) varied between 0.01 and 0.04%, and similar to the IPCE results, the efficiency is a function of the thickness of the PV active layer.     

Surface characterization of functional poly(diacetylene) and poly(butadiene) mono- and multilayers

The surface properties of Langmuir-Blodgett mono- and multilayers of a variety of amphiphilic poly(diacetylene)s and poly(butadiene)s were investigated by contact angle, streaming potential, ellipsometry, and X-ray photoelectron spectroscopic (XPS) measurements. Captive air and octane angles varied between approximately 60° and 105° for hydrophobicx-layers and 31° to 46° for hydrophilic surfaces depending on the particular head group, whereas advancing angles determined via the vertical plate method are considerably higher. Negative streaming potentials were obtained for all surfaces. Positively charged monolayers yielded less negative- potential values (–28 mV) than negatively charged (–52 mV) or hydrophobic (–50 mV) layers. Ellipsometry measurements yielded an average layer thickness of 27±6 Å for 3 to 11 layers. X-ray photoelectron spectroscopy results qualitatively confirmed the expected composition. All of the samples, which were handled and stored in air after deposition and polymerization, were surface oxidized.Dedicated to Prof. Dr. F. H. Müller.     

Temperature-sensitive membranes prepared from blends of poly(vinylidene fluoride) and poly(N-isopropylacrylamides) microgels

In this study, temperature-sensitive membranes were prepared by phase transition of the mixture of the temperature-sensitive poly(N-isopropylacrylamides) (PNIPAAM) microgels and poly(vinylidene fluoride). The results of Fourier transformed infrared spectrometer, X-ray photoelectron spectroscopy, elemental analysis, and scanning electron microscope photographs indicate that the PNIPAAM microgels are distributed more in the inner membrane than on the surface. The scanning electron microscope photographs reveal the blend membranes having porous surfaces with nanometer sizes and porous cross-sections with micrometer sizes. The addition of the PNIPAAM microgels is found to improve the porosity, the pore size, water flux, as well as to enhance the hydrophilicity and anti-fouling property of the blend membranes. The blend membrane shows temperature-sensitive permeability and protein rejection with the most dramatic change at around 32 °C which is the lower critical solution temperature of PNIPAAM, when water or bovine serum albumin solution flow through. Specifically, below 32 °C, the blend membrane shows a high protein rejection ratio which decreases with increasing temperature and a low water flux which increases with increasing temperature; above 32 °C, the blend membrane shows a low protein rejection ratio which decreases with increasing temperature and a high water flux which increases with increasing temperature.     

Polyelectrolyte membranes prepared by dynamic self-assembly of poly (4-styrenesulfonic acid-co-maleic acid) sodium salt (PSSMA) for nanofiltration (I)

In recent years, the layer-by-layer (LBL) self-assembly of polyelectrolyte has attracted much attention for the preparation of nanofiltration (NF) membranes. However, most researchers focused on the homopolymers, few studied on the copolymers for the preparation of NF membranes. In the present work, a series of nanofiltration membranes were prepared by dynamic self-assembly of a copolymer polyelectrolyte containing both weakly and strongly ionized groups, poly (4-styrenesulfonic acid-co-maleic acid) sodium salt (PSSMA), with poly (allylamine hydrochloride) (PAH) and poly (styrenesulfonic acid sodium salt) (PSS) on the modified polyacrylonitrile (PAN) ultra-filtration membranes. The effects of substrate, deposition pH, SS/MA ratio in PSSMA, concentration of the PSSMA and bilayer number on the properties of the NF membranes were investigated. The results indicated that the performances of the NF membranes prepared by dynamic self-assembly process were superior to those prepared by the static self-assembly process. The membranes terminated with PSSMA were negatively charged. Due to the changes of charge density and conformation of PSSMA in different pH conditions, the [PAH/PSS]₁PAH/PSSMA membrane prepared at pH 2.5 showed higher Na₂SO₄ rejection and larger flux than those of the membrane prepared at pH 5.7. The NF membrane [PAH/PSS]₁PAH/PSSMA composed of only two bilayers exhibited 91.4% Na₂SO₄ rejection and allowed solution flux of 28.6 L/m² h at 0.2 MPa. The solution flux increased to 106.6 L/m² h at 0.8 MPa, meanwhile, no obvious decrease in Na₂SO₄ rejection was observed.     

Covalent attachment of multilayers on poly(tetrafluoroethylene) surfaces

These studies demonstrate a new approach of producing multifunctionalized coatings on poly(tetrafluoroethylene) (PTFE) surfaces by covalent attachments of multilayers (CAM) of heparin (HP) and poly(ethylene glycol) (PEG). This process can be universally applied to other covalently bonded species and was facilitated by microwave plasma reactions in the presence of maleic anhydride which, upon ring-opening and hydrolysis, provided covalent attachment of COOH groups to PTFE. These studies showed that alternating layers of PEG and HP can be covalently attached to COOH-PTFE surfaces, and the volume concentration and surface density of PEG and HP on the PTFE surface achieved by the CAM were 7.02-6.04 × 10(-3) g/cm(3) (2.1-1.8 × 10(-7) g/cm(2)) and 9.3-8.7 × 10(-3) g/cm(3) (2.8-2.6 × 10(-7) g/cm(2)), respectively. The CAM process may serve numerous applications when the covalent modification of inert polymeric substrates is required and particularly where the presence of bioactive species for biocompatibility enhancement is desirable.     

Polyelectrolyte complex nanoparticles from chitosan and poly(acrylic acid) and Polystyrene‐block‐poly(acrylic acid)

Interpolymer polyelectrolyte complexes of chitosan (CS) with poly(acrylic acid) homopolymers and polystyrene‐block‐poly(acrylic acid) diblock copolymers were prepared and characterized. The influence of the positive/negative charge balance (charge ratio), pH, and ionic strength were thoroughly studied by dynamic light scattering. The existence of a strong polyelectrolyte effect was also highlighted in this study. Domains of stability, in which nanoparticle sizes are smaller than 100 and 200 nm for complexes of CS with the homopolymer and copolymer, respectively, were identified and confirmed by scanning electron microscopy and atomic force microscopy. The charged nature of the surface of the nanoparticles was evidenced by Zeta potential measurements. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Photochemical release of bases from nucleosides and their derivatives by water-soluble iron(III) porphyrins.

The compounds [meso-tetrakis(1-methyl-4-pyridiniumyl)porphyrinato]iron(III ) (FeIIITMPyP) and [meso-tetrakis(3,5-dichloro-1-methyl-4-pyridiniumyl)porphyrinat o]iron(III) (FeIIITCl2MPyP) photocatalysed the release of bases from nucleosides and their derivatives. The ribonucleosides, of which cytidine (C) gave the highest yield, produced much higher yields of free base than the corresponding deoxyribonucleosides. Under an argon atmosphere, virtually quantitative reduction of FeIIITMPyP into FeIITMPyP by C or 2'-deoxycytidine (dC) was observed and the reduction by C was much more effective than by dC. The increased reactivity of ribonucleosides relative to deoxyribonucleosides was ascribed to a difference in the binding properties of the porphyrin-nucleoside interactions and to base-releasing degradation of ribonucleosides from their C-2' carbon radical.     

Synthesis and characterization of water-soluble poly(p-phenylene vinylene) derivatives via the dithiocarbamate precursor route

Two hydrophilic branched oligo(ethylene glycol)-substituted PPV derivatives, poly(2,5-bis(1,3-bis(triethoxymethoxy)propan-2-yloxy)-1,4-phenylene vinylene) (BTEMP-PPV) and poly(2-methoxy-5-(1,3-bis(triethoxymethoxy)propan-2-yloxy)-1,4-phenylene vinylene) (MTEMP-PPV), are presented. Polymerizations have been performed via the dithiocarbamate precursor route, using lithium hexamethyldisilazide (LHMDS) as a base, to obtain high molecular weight precursor polymers. After thermal conversion of the precursor polymers into the fully conjugated systems, the solubility of the polymers has been examined. The polar nonionic side chains of MTEMP-PPV and BTEMP-PPV render the PPV backbone soluble in a variety of solvents, including alcohols and even water, making these polymers suitable candidates to be used in optoelectronic devices that can be processed from environmentally friendly solvent systems.     

Model polyurethane elastomers prepared from noncrystallizable poly(propylene oxide) chains

Elastomers of controlled molecular structure were prepared from hydroxyl-terminated atactic poly(propylene oxide) (PPO) chains having number-average molecular weights M_n in the range 800–4360 g mole^?1. The chains were end-linked into noncrystallizable trifunctional networks using a specially prepared aromatic triisocyanate. The networks thus obtained were studied with regard to their stress–strain isotherms in the unswollen state, in elongation at 25°C, and with regard to their equilibrium swelling in benzene at 61°C. Values of the modulus in the limit at high deformation were in good agreement with corresponding results previously obtained on networks of poly(dimethylsiloxane) (PDMS). This is of considerable importance since use of the widely used “plateau modulus” as a measure of interchain entangling would suggest that the networks of PPO would have a much higher density of such entanglements than would the corresponding networks of PDMS. The close similarity between the moduli of the two types of networks therefore argues against the idea that such entanglements make large contributions to the equilibrium elastomeric properties of a polymer network. These values of the high deformation modulus are also in good agreement with recent molecular theories as applied to the nonaffine deformation of a “phantom” network. The values of the low deformation modulus were considerably smaller than the values predicted for an affine deformation, however, suggesting that the junction points were not firmly embedded in the network structure. This is presumably due to the relatively low degree of chain-junction entangling in the case of relatively short network chains. The swelling equilibrium results were in very good agreement with the new theory of network swelling developed by Flory.     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

Hollow capsules prepared from all block copolymer micelle multilayers

We introduce a novel and versatile approach for preparing hollow multilayer capsules containing functional hydrophobic components. Protonated polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and anionic polystyrene-block-poly(acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films onto polystyrene (PS) colloids. After removing the PS colloids, the stabilities of the formed BCM hollow capsules were found to be strongly dependent on the charge density of the hydrophilic corona segments (i.e., P4VP and PAA block segments) as well as the relative molecular weight ratio of hydrophobic core (i.e., PS segments) blocks and hydrophilic corona shells. Furthermore, in the case of incorporating hydrophobic fluorescent dyes into the PS core blocks of micelles, the hairy/hairy BCM multilayers showed well-defined fluorescent images after colloidal template removal process. These phenomena are mainly caused by the relatively high degree of electrostatic interdigitation between the protonated and anionic corona block shells.     

Rapid release of plasmid DNA from polyelectrolyte multilayers: a weak poly(acid) approach

We demonstrate an approach to the assembly of DNA-containing polyelectrolyte multilayers that can be used to promote rapid release of DNA from surfaces. The approach is based on layer-by-layer incorporation of poly(acrylic acid) to promote rapid erosion in physiologically relevant media.     

Mechanical properties of dual-phase polymer electrolytes prepared from poly(styrene-co-butadiene) rubber/poly(acrylonitrile-co-butadiene) rubber mixed latices

Mechanical properties of two dual-phase polymer electrolytes (DPEs), prepared from poly(styrene-co-butadiene) rubber (SBR) and poly(acrylonitrile-co-butadiene) rubber (NBR) latices, are studied. Both DPEs are composed of an SBR supporting phase and an ionconductive phase of NBR/lithium salt solution. The first DPE maintains a tensile strength of 0.5 MPa and elongation of 280% with an ionic conductivity of 10^?3 S/cm. Although the glass transition relaxations based on the dual-phase structure are not resolved in this DPE because of the proximity of the glass transition temperatures of the SBR and NBR, the glass transition shifts to a lower temperature due to the plasticization by the lithium salt solution. In the second DPE, two distinctive glass transition relaxations, corresponding to the SBR and NBR phases, are observed in the viscoelasticity versus temperature measurement, indicating the dual-phase structure. A simple equivalent mechanical model, which is modified from the Takayanagi model, is introduced to elucidate the mechanical behavior of the dual-phase structure in the second DPE. According to this model, 8% of DPE is a mechanically continuous SBR phase in the tensile direction, which effectively gives mechanical support to the DPE. © 1995 John Wiley & Sons, Inc.