Synthesis of PP-<Emphasis Type="Italic">g</Emphasis>-PIP and properties of PP/PP-<Emphasis Type="Italic">g</Emphasis>-PIP binary blends

The polypropylene-graft-polyisoprene (PP-g-PIP) copolymers with different side chain length were synthesized by the combination of solid phase graft and anionic polymerization. The copolymers were characterized by nuclear magnetic resonance spectrum (¹H-NMR), gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). Five PP/PP-g-PIP blends with PP-g-PIP as a flexibilizer to toughen PP were prepared and characterized by scanning electron microscope (SEM), dynamic mechanical analysis (DMA), DSC, wide-angle X-ray diffraction (WAXD). Their morphologies, glass transition temperatures, crystallinity and mechanical properties were investigated. All the results pointed out that the covalent bonding of PP and PIP increased the compatibility and interfacial adhesion, which led to PIP well dispersed in the system and small size PIP particles in the binary blends. In addition, the toughness of PP was improved while its tensile strength slightly decreased.     

Synthesis of novel 2-phenoxybenzo[<Emphasis Type="Italic">g</Emphasis>][1,2,4]triazolo[1,5-<Emphasis Type="Italic">a</Emphasis>]quinazoline and its derivatives starting with diphenyl-<Emphasis Type="Italic">N</Emphasis>-cyanoimidocarbonate

Cyclocondensation reaction of 3-hydrazinyl-2-naphthoic acid with diphenyl-N-cyanoimidocarbonate furnished the target 2-phenoxy-benzo[g][1,2,4]triazolo[1,5-a]quinazolin-5(4H)-one (1) in high yield. Alkylation, thionation and chlorination of the lactam group in the compound 1 produced a variety of derivatives 2–17. Their structures were characterized by NMR and HREI-MS analyses.     

Brazilian <Emphasis Type="Italic">Dioscoreaceas</Emphasis> starches

Determination of the characteristics of native starches is crucial in order to select their best application in various industrial fields. Thus, two different types of non-traditional native starches from the Dioscoreaceas species (Dioscorea sp. and Dioscorea piperifolia Humb. var. Wild) were studied regarding their thermal, structural and rheological properties. The results were contrasted with traditional commercial starch sources (potato, cassava and corn). From the thermogravimetric results (TG/DTG), D. piperifolia starch obtained the highest thermal stability of the samples, except for potato starch. Furthermore, using differential scanning calorimetry and viscoamylograph profiles (RVA), it was found that the Dioscoreaceas starches presented a higher onset (T _o) temperature and susceptibility to retrogradation. They also showed lower values in relation to relative crystallinity, which was calculated from their X-ray patterns and tendency to white (L*) colour. The shapes of the Discoreaceas starch granules were determined using electron microscopy; it was found that as the potato starch the Dioscoreaceas starches showed a wide range of particle size.     

Synthesis and X-ray study of 6<Emphasis Type="Italic">H</Emphasis>-chromeno[3,4-<Emphasis Type="Italic">e</Emphasis>][1,3,4]triazolo[2,3-<Emphasis Type="Italic">a</Emphasis>]pyrimidine

2-Dimethylamino methylenechromanone 1 reacted with 4H-1,2,4-triazol-3-amine in acetic acid to give only one isolated product which was identified by X-ray study as 6H-chromeno[3,4-e][1,3,4]triazolo[2,3-a]-pyrimidine. The molecular structure of 3, C₁₂H₈N₄O, was determined to be monoclinic, P2₁/c, a = 16.3875(5), b = 8.8378(3), c = 13.8392(5) Å, β = 101.190(1)°, V = 1966.22(11) ų, Z = 8.     

Synthesis of oxo derivatives of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">p</Emphasis>-tolysulfonyl)hexahydrocycloalka[<Emphasis Type="Italic">b</Emphasis>]indoles

Hydroxymercuration-demercuration of N-p-tolysulfonyl-4,4a,9,9a-tetrahydro-3H-carbazoles and N-p-tolyl(or methyl)sulfonyl-1,3a,4,8b-tetrahydrocyclopenta[b]indoles leads to the formation of the corresponding N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-2-ols and N-p-tolyl(or methyl)sulfonyl-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indol-2-ols. The latter are oxidized to 2-oxo derivatives with potassium dichromate. The oxidation of 2-methoxy-8-methyl-N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-ol under analogous conditions gives 2-methoxy-8-methyl-N-p-tolysulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-one.     

Research on the Solid State Fermentation of Jerusalem Artichoke Pomace for Producing <Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">R</Emphasis>-2,3-Butanediol by <Emphasis Type="Italic">Paenibacillus polymyxa</Emphasis> ZJ-9

R,R-2,3-butanediol (R,R-2,3-BD) was produced by Paenibacillus polymyxa ZJ-9, which was capable of utilizing inulin without previous hydrolysis. The Jerusalem artichoke pomace (JAP) derived from the conversion of Jerusalem artichoke powder into inulin extract, which was usually used for biorefinery by submerged fermentation (SMF), was utilized in solid state fermentation (SSF) to produce R,R-2,3-BD. In this study, the fermentation parameters of SSF were optimized and determined in flasks. A novel bioreactor was designed and assembled for the laboratory scale-up of SSF, with a maximum yield of R,R-2,3-BD (67.90 g/kg (JAP)). This result is a 36.3% improvement compared with the flasks. Based on the same bath of Jerusalem artichoke powder, the total output of R,R-2,3-BD increased by 38.8% for the SSF of JAP combined with the SMF of inulin extraction. Overall, the utilization of JAP for R,R-2,3-BD production was beneficial to the comprehensive utilization of Jerusalem artichoke tuber.     

Secondary self-assembly behaviors of PEO-<Emphasis Type="Italic">b</Emphasis>-P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS triblock terpolymers in solution

A series of PEO₄₅-b-PtBA₅₃-b-PS _x (x = 42, 84, 165) triblock terpolymers were synthesized by the atom transfer radical polymerization and characterized by size exclusion chromatography and ¹H NMR. Their self-assemblies were conducted by a two-step hierarchical self-assembly method and a one-step dialysis method and the self-assembly behaviors were investigated. The morphologies, sizes, and size distributions of micelles produced by the self-assembly were determined by transmission electron microscopy and dynamic light scattering. The secondary self-assembled structure of PEO₄₅-b-PtBA₅₃-b-PS _x obtained by the two-step hierarchical self-assembly could be controlled by tuning the length of PS block, the core forming block. The micelles were uniform with diameters of 20–25 nm and their size distributions, except for that of PEO₄₅-b-PtBA₅₃-b-PS₁₆₅, were narrow with particle size distribution indexes ranging from 0.014 to 0.246. The one-step dialysis of the triblock terpolymers produced vesicular micelles with distinct vesicle walls that exhibited similar thicknesses. The vesicles did not show significant aggregation. The size distribution of PEO₄₅-b-PtBA₅₃-b-PS₄₂ vesicle was the narrowest with a particle size distribution index value of 0.135. The PEO₄₅-b-PtBA₅₃-b-PS₁₆₅ vesicles tended to overlap with each other.     

Synthesis of <Emphasis Type="Italic">ortho</Emphasis>-carboranyl derivatives of (<Emphasis Type="Italic">S</Emphasis>)-asparagine and (<Emphasis Type="Italic">S</Emphasis>)-glutamine

(S)-Asparagine and (S)-glutamine ortho-carboranyl derivatives with free amino and carboxy groups in the α-position were synthesized. By an example of N ^γ-(1,2-dicarba-closo-dodecarboran-3-yl)-(S)-glutamine it was demonstrated that the developed synthetic approach carboranyl derivatives of amino acids allowed the preparation of optically pure isomers.     

Thermal Rearrangements of 3<Emphasis Type="Italic">H</Emphasis>- and 4<Emphasis Type="Italic">H</Emphasis>-Pyrazoles Prepared by Reactions of 9-Diazofluoren with Methyl Tetrolate and Methyl 3-Phenylpropiolate

9-Diazofluoren adds in Et₂O at 20°C to methyltetrolate in keeping with Auwers rule and nonregioselectively adds to methyl-3-phenylpropiolate with the formation of spirocyclic 3H-pyrazoles. The methyltetrolate adduct at boiling in toluene converts into methyl 3a-methyl-3aH-dibenzo[e,g]indazole-3-carboxylate, at 190°C in benzene, into methyl 3-methyl-2H-dibenzo[e,g]indazole-2-carboxylate, and at 160°C in methanol, into 3-methyl-2H-dibenzo[e,g]indazole. Auwers adduct of methyl 3-phenylpropiolate at boiling in benzene gives cyclopropene derivative and at boiling in methanol isomerizes into methyl 3a-phenyl-3aHdibenzo[e,g]indazole-3-carboxylate. Anti-Auwers adduct at boiling in benzene isomerizes into methyl 2-phenylpyrazolo[1,5-f]phenanthridine-3-carboxylate.     

<Emphasis Type="Italic">CrMAPK3</Emphasis> regulates the expression of iron-deficiency-responsive genes in <Emphasis Type="Italic">Chlamydomonas reinhardtii</Emphasis>

Background

Under iron-deficient conditions, Chlamydomonas exhibits high affinity for iron absorption. Nevertheless, the response, transmission, and regulation of downstream gene expression in algae cells have not to be investigated. Considering that the MAPK pathway is essential for abiotic stress responses, we determined whether this pathway is involved in iron deficiency signal transduction in Chlamydomonas.

Results

Arabidopsis MAPK gene sequences were used as entry data to search for homologous genes in Chlamydomonas reinhardtii genome database to investigate the functions of mitogen-activated protein kinase (MAPK) gene family in C. reinhardtii under iron-free conditions. Results revealed 16 C. reinhardtii MAPK genes labeled CrMAPK2–CrMAPK17 with TXY conserved domains and low homology to MAPK in yeast, Arabidopsis, and humans. The expression levels of these genes were then analyzed through qRT-PCR and exposure to high salt (150 mM NaCl), low nitrogen, or iron-free conditions. The expression levels of these genes were also subjected to adverse stress conditions. The mRNA levels of CrMAPK2, CrMAPK3, CrMAPK4, CrMAPK5, CrMAPK6, CrMAPK8, CrMAPK9, and CrMAPK11 were remarkably upregulated under iron-deficient stress. The increase in CrMAPK3 expression was 43-fold greater than that in the control. An RNA interference vector was constructed and transformed into C. reinhardtii 2A38, an algal strain with an exogenous FOX1:ARS chimeric gene, to silence CrMAPK3. After this gene was silenced, the mRNA levels and ARS activities of FOX1:ARS chimeric gene and endogenous CrFOX1 were decreased. The mRNA levels of iron-responsive genes, such as CrNRAMP2, CrATX1, CrFTR1, and CrFEA1, were also remarkably reduced.

Conclusion

CrMAPK3 regulates the expression of iron-deficiency-responsive genes in C. reinhardtii.

     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.     

Cycloaminomethylation of dihydric phenols catalyzed by <Emphasis Type="Italic">d</Emphasis>- and <Emphasis Type="Italic">f</Emphasis>-metal compounds

An efficient method has been developed for the synthesis of 7,16,25-triaryl-7,8,16,17,25,26-hexahydro-6H,15H,24H-tribenzo[f,m,t][1,5,8,12,15,19,3,10,17]hexaoxatriazacyclohenicosines, 3,8-diaryl-2,3,4,7,8,9-hexahydrobenzo[1,2-e:4,3-e′]bis[1,3]oxazines, 3,9-bis(chlorophenyl)-3,4,9,10-tetrahydro-2H,8H-benzo[1,2-e:3,4-e′]bis[1,3]oxazines, and 2,9-bis(chlorophenyl)-1,2,3,8,9,10-hexahydrobenzo[1,2-e:6,5-e′]bis-[1,3]oxazines via cycloaminomethylation of pyrocatechol, resorcinol, and hydroquinone with N,N-bis(methoxymethyl) anilines in the presence of samarium catalysts.     

Preparation of starch-<Emphasis Type="Italic">g</Emphasis>-PMMA,starch-<Emphasis Type="Italic">g</Emphasis>-P(MMA/BMA) and starch-<Emphasis Type="Italic">g</Emphasis>-P(MMA/MA) nanoparticles and their reinforcing effect on natural rubber by latex blending: a comparative study

Nanoparticles including starch-graft-methylmethacrylate, starch-graft-(methylmethacrylate/methyl acrylate), starch-graft-(methyl methacrylate/butyl methacrylate) were synthesized via emulsifier-free emulsion polymerization and were blended with natural rubber latex at various mass ratios. Chemical structure of graft copolymers was confirmed by Fourier transform infrared. Transmission electron microscopy demonstrated the core-shell structures of the nanoparticles distributed uniformly around the natural rubble particles. The tensile strength of blend films was significantly enhanced by addition of graft copolymers. Besides, scanning electron microscopy and atomic force microscopy showed the blend film had smooth surface.     

<Emphasis Type="Italic">Tetra</Emphasis>-EDOT substituted 3D electrochromic polymers with lower band gaps

A couple of novel electrochromic materials poly(2,3,4,5-tetrakis(2,3-hydrothieno[3,4-b]dixin-5-yl)-1-methyl-1H-pyrrole) (P(t-EDOT-mPy)) and poly(5,5′,5′′,5′′′-(thiophene-2,3,4,5-tetrayl)tetrakis(2,3-dihydrothieno[3,4-b][1,4]dioxine)) (P(t-EDOT-Th)) are electrodeposited via multi-position polymerization of their tetra-EDOT substituted monomers t-EDOT-mPy and t-EDOT-Th, respectively. Compared with the linear 2D structured poly(thiophene) (E _g=2.2 eV) and poly(2,5-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)thiophene) (E _g=1.7 eV), P(t-EDOT-Th) (E _g=1.62 eV) has the lowest band gap. Hence, we speculate that the band gaps of the two polymers, having 3D structures, are decreased in contrast to non-substituted polymers or bi-EDOT substituted polymers, thiophene and 1-methyl-1H-pyrrole. The results indicated that P(t-EDOT-Th) thin films are more stable and show higher transmittance amid two polymers, which may find their utilization in organic optoelectronics.     

Robust Parameter Identification to Perform the Modeling of <Emphasis Type="Italic">pta</Emphasis> and <Emphasis Type="Italic">poxB</Emphasis> Genes Deletion Effect on <Emphasis Type="Italic">Escherichia Coli</Emphasis>

The aim of this study was to design a robust parameter identification algorithm to characterize the effect of gene deletion on Escherichia coli (E. coli) MG1655. Two genes (pta and poxB) in the competitive pathways were deleted from this microorganism to inhibit pyruvate consumption. This condition deviated the E. coli metabolism toward the Krebs cycle. As a consequence, the biomass, substrate (glucose), lactic, and acetate acids as well as ethanol concentrations were modified. A hybrid model was proposed to consider the effect of gene deletion on the metabolism of E. coli. The model parameters were estimated by the application of a least mean square method based on the instrument variable technique. To evaluate the parametric identifier method, a set of robust exact differentiators, based on the super-twisting algorithm, was implemented. The hybrid model was successfully characterized by the parameters obtained from experimental information of E. coli MG1655. The significant difference between parameters obtained with wild-type strain and the modified (with deleted genes) justifies the application of the parametric identification algorithm. This characterization can be used to optimize the production of different byproducts of commercial interest.     

<Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminobenzoquinones as novel regulators of radical polymerization

The effect of a number of quinoid compounds on methyl methacrylate polymerization initiated by azo-bis(isobutyronitrile) has been studied. It has been revealed that N-aryl-o-iminobenzoquinones, in contrast to o-benzoquinones, can provide radical polymerization of methyl methacrylate in controllable mode. The efficiency of the compounds as chain growth regulators has been found to depend on their composition and reaction conditions. It has been established that 4,6-di-tert-butyl-N-(2,6-diethylphenyl)-o-iminobenzoquinone and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone under radical initiation conditions provide the synthesis of poly(methyl methacrylate) with wide-range molecular weight, retaining polydispersity indices about ~1.4–1.8 up to deep conversions.     

Atropisomeric <Emphasis Type="Italic">N</Emphasis>-acyl-<Emphasis Type="Italic">N</Emphasis>-(cyclopentenylphenyl)glycines in the synthesis of oxazolo[3,4-<Emphasis Type="Italic">a</Emphasis>]benzoxazocinones

Intramolecular [3+2]-cycloaddition was studied of munchnones generated at heating syn- and anti-atropisomers of N-acyl-N-[6-methyl-2-(cyclopent-2-en-1-yl)phenyl]glycines with acetic anhydride. By spectral and X-ray diffraction analysis syn-isomers of acids and tetrahydro-1,4,7-methanetriyl[1,3]oxazolo[3,4-a][1]- bensazocin-3(3aH)-ones were identified.     

Synthesis of ethyl (2<Emphasis Type="Italic">E</Emphasis>,4<Emphasis Type="Italic">E</Emphasis>)- and (2<Emphasis Type="Italic">E</Emphasis>,4<Emphasis Type="Italic">Z</Emphasis>)-5-chloropenta-2,4-dienoates

An efficient synthetic approach to 2E,4E and 2E,4Z isomers of ethyl 5-chloropenta-2,4-dienoate has been developed on the basis of one-pot oxidation–olefination of readily accessible (E)- and (Z)-3-chloroprop-2-en-1-ols by the action of barium manganate and ethyl (triphenyl-λ⁵-phosphanylidene)acetate.     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).     

Binuclear copper(II) complexes with acyldihydrazones of <Emphasis Type="Italic">N</Emphasis>-benzenesulfonyl-<Emphasis Type="Italic">L</Emphasis>-aspartic acid

The structure and the EPR spectra of copper(II) coordination compounds with acyldihydrazones of N-benzenesulfonyl-L-aspartic acid and salicylaldehyde (2-hydroxyacetophenone) were described. The compounds were studied by chemical and thermal analyses, IR spectroscopy, and EPR. The molecular and crystal structures of copper(II) complexes with N-benzenesulfonyl-L-aspartic acid bis(salicylidene)hydrazone (H₄L¹) [Cu₂L¹ · 2Py] · 1.5 H₂O was determined by X-ray diffraction. The crystals are triclinic: a = 10.4714(4) Å, b = 12.9702(5) Å, c = 14.6187(9) Å, α = 104.763(2)°, β = 93.082(2)°, γ = 111.4240(10)°, space group P \(\bar 1\), Z = 2. The binuclear complexes containing copper cations whose coordination polyhedra are connected by an aliphatic spacer (Cu...Cu, 8.669 Å) are additionally linked by phenoxy bridges (Cu...Cu, 3.398 Å). The EPR spectra of these compounds in solutions exhibit an isotropic signal of seven HFS lines due to two equivalent copper ions with the spin Hamiltonian parameters g = 2.115?2.120, a _Cu = (35.5?38.0) × 10^?4 cm^?1, which is indicative of weak exchange interactions between the paramagnetic sites.