Novel terpolymers of poly(<Emphasis Type="Italic">p</Emphasis>-dioxanone-<Emphasis Type="Italic">co</Emphasis>-trimethylene carbonate-<Emphasis Type="Italic">co</Emphasis>-L-phenylalanine): Synthesis,characterization, thermal properties and copolymerization mechanism

In order to exploit the biological functions of materials, a series of new random terpolymers were synthesized by the ring-opening polymerization of p-dioxanone, trimethylene carbonate, and L-phenylalanine N-carboxyanhydride (L-Phe- NCA) in the presence of stannous octoate. The terpolymers were characterized by ¹H-NMR, ¹³C-NMR, FTIR, and gel permeation chromatography. The effects of the reactant ratio, catalyst dosage, reaction temperature and time on the copolymerization were investigated, and were found to regulate the composition of the terpolymer. Increases in the reaction temperature, polymerization time, L-Phe-NCA monomer amount, and catalyst content generated a product with a slightly decreased molecular weight. The crystallinity of the terpolymer was investigated by differential scanning calorimetry and polarized optical microscopy. A reasonable mechanism for the polymerization was proposed based on the obtained results.     

Preparation,characterization and morphological study of poly(<Emphasis Type="Italic">m</Emphasis>-toluidine-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-aminoacetophenone) conductive copolymer

A new series of copolymers of poly(m-toluidine-co-m-aminoacetophenone) were synthesized by the chemical oxidative method in acid medium. The copolymers were characterized by UV–Vis and FTIR spectroscopy. X-ray diffraction analysis revealed the partial crystalline nature of copolymer. The morphological study by SEM analysis indicated that the surface of the copolymer had the granular structure of agglomerated morphology with average particle size of 200 nm. The conductivity of the copolymers ranged from 2 × 10^–4 to 3.3 × 10^–8 S/cm and the conductivity decreased with the increase of comonomer concentration. The resultant copolymers showed an enhanced solubility and an improved processability when compared with pure polyaniline.     

Conformational Polymorphism in Racemic 2,4-Di-<Emphasis Type="Italic">o</Emphasis>-Benzoyl-6-<Emphasis Type="Italic">o</Emphasis>-Tosyl <Emphasis Type="Italic">myo</Emphasis>-Inositol 1,3,5-Orthoacetate

The title compound, C₂₉H₂₆O₁₀S, yields two conformational polymorphs concomitantly from dichloromethane-methanol mixture; the major polymorph grows as plates (Form I, monoclinic, P2₁/n) and the minor polymorph grows as needles (Form II, triclinic, P-1). The two forms differ mainly in orientation of the tosyl group. In Form I, sulfonyl oxygen of the tosyl group makes intermolecular C −H…O interactions, whereas the same group in Form II is involved in an intramolecular short dipolar S=O…C=O (sulfonyl-carbonyl) contact. The molecular organization and the influence of various weak non-covalent interactions that stabilize these conformers in the crystal lattices are discussed.     

Cytotoxicity of poly(<Emphasis Type="Italic">p</Emphasis>-phenylenediamine)

Although poly(p-phenylenediamine) is an electric non-conductor, it exhibits, analogously to conducting polymers, redox activity and could, therefore, find applications in biomedicine. In the current work, the cytotoxicity of poly(p-phenylenediamine) polymer powder produced by the chemical oxidation of p-phenylenediamine with ammonium peroxydisulfate in acidic aqueous media has been studied. Primary mouse embryonic fibroblasts were used for this purpose. Interestingly, the standard methods for the determination of polymer cytotoxicity based on international standard EN ISO 10993-5 could not be applied. The reason was the interaction of polymer extracts with MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay. On the basis of the evaluation of flow cytometry and micrographs taken by fluorescence microscopy on cells treated with extracts of poly(p-phenylenediamine), it can be concluded that the powder polymer possesses severe cytotoxicity. The results suggest that practical application of the polymer within biomedicine is, at the current state of knowledge, difficult, and modification of the preparation techniques and/or subsequent purification of poly(p-phenylenediamine) is needed.     

Mono-<Emphasis Type="Italic">meso</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylporphyrin

Summary. Treatment of meso-tetra(tert-butyl)porphyrin with sulfuric acid/n-butanol affords a mixture of porphyrin and mono-tert-butylporphyrin in relatively high yield.     

Synthesis of (<Emphasis Type="Italic">E</Emphasis>)-<Emphasis Type="Italic">N</Emphasis>-(3-alkoxy-4-acyloxyphenylmethylene)-<Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">e</Emphasis>-cyclohexyl)amines

Previously unknown E isomers of azomethines (Schiff bases) were synthesized from vanillal and vanillin esters by their reaction with cyclohexylamine.     

Synthesis of derivatives of <Emphasis Type="Italic">o</Emphasis>-aminoacetophenone and <Emphasis Type="Italic">o</Emphasis>-aminobenzyl alcohol

Oxidation of 2′-hydroxy-8-methylspiro[4H-benz-1,3-oxazin-2-one-6,1′-cyclopentane] or N-mesyl-2-(cyclopent-1-en-1-yl)-6-methylaniline provided the corresponding ketones. The rearrangement of these ketones oximes under treatment with thionyl chloride gave rise to nitriles of 5-(2-amino-3-methylphenyl)-5-oxopentanoic or 5-(2-methanesulfamido-3-methylphenyl)-5-hydroxypentanoic acids. By heating 5-(2-acetylamido-3-methylphenyl)-5-oxopentanoic acid with LiH in THF3-(2,8-dimethylquinol-4-on-3-yl)propanoic acid was obtained.     

Synthesis and properties of organic-inorganic hybrid P(NIPAM-<Emphasis Type="Italic">co</Emphasis>-AM-<Emphasis Type="Italic">co</Emphasis>-TMSPMA) microgels

Utilizing the hydrolysis and condensation of the methoxysilyl moieties, organic-inorganic hybrid poly(N-isopropylacrylamide-co-acrylamide-co-3-(trimethoxysilyl)propylmethacrylate) P(NIPAM-co-AM-co-TMSPMA) microgels were prepared via two different methods. The first method was that the microgels were post-fabricated from the crosslinkable linear P(NIPAM-co-AM-co-TMSPMA) terpolymer aqueous solutions above the lower critical solution temperature (LCST) of the terpolymer. For the second method, the microgels were directly synthesized by conventional surfactant free emulsion copolymerization of NIPAM, AM, and TMSPMA. The hydrodynamic diameter and stability of the resultant P(NIPAM-co-AM-co-TMSPMA) microgels strongly depend on the pH and temperature of the microgel aqueous solution. The hydrodynamic diameters of the microgels decreased with increasing the measuring temperature. The phase transition temperature of the microgels was found to be around 34°C, which was independent of the initial terpolymer concentration and shifted to lower temperature with increasing the preparation temperature. Increasing the initial amount of AM will enhance the instability of the microgels at high pH values. Moreover, the P(NIPAM-co-AM-co-TMSPMA) microgels obtained from the linear terpolymer had more homogeneous microstructures as compared with the corresponding NIPAM/AM/TMSPMA microgels prepared by one step emulsion copolymerization as revealed by light scattering measurements.     

Synthesis,characterisation, and electrical properties of novel nanostructured conducting poly(aniline-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-chloroaniline) with incorporated silver particles

Novel copolymers of poly(aniline-co-m-chloroaniline)-doped dodecylbenzenesulphonic acid (DBSA) with embedded silver nanoparticles were synthesised using the in situ chemical oxidative method. The structural properties of the copolymers were characterised using the UV-VIS and FTIR spectroscopic methods. The crystalline nature of the copolymer was demonstrated by way of the X-ray diffraction (XRD) pattern. Scanning electron microscopy (SEM) revealed the presence of particle agglomerates measuring 50 nm to 100 nm on the surface of the nanocomposites. The electrical conductivity of the copolymer was dependent on the monomer composition and was found to be in the range of 10^?2 S cm^?1 to 10^?6 S cm^?1 with an increasing chloroaniline content and exhibiting improved solubility.     

Molecular orientation and optical anisotropy in drawn films of cellulose diacetate-<Emphasis Type="Italic">graft</Emphasis>-PLLA: comparative investigation with poly(vinyl acetate-<Emphasis Type="Italic">co</Emphasis>-vinyl alcohol)-<Emphasis Type="Italic">graft</Emphasis>-PLLA

Cellulose diacetate-graft-poly(L-lactide) (CDA-g-PLLA) and poly(vinyl acetate-co-vinyl alcohol)-graft-PLLA (P(VAc-co-VOH)-g-PLLA) were synthesized over a range of compositions, by ring-opening copolymerization of L-lactide at the original hydroxyl positions of the respective trunk polymers, CDA (acetyl DS = 2.15) and P(VAc-co-VOH)-g-PLLA (VAc = 64.2 mol%). All the products of both graft copolymer series were non-crystallizable and their solution-cast films showed no domain segregation of the two components that constituted the trunk and side-chains. A comparative study on the molecular orientation and optical anisotropy induced by uniaxial stretching of film samples was undertaken for the two copolymer series with various side-chain lengths. Overall behaviour of the orientation was estimated from the statistical second (<cos² ω>) and fourth (<cos⁴ ω>) moments obtained by a fluorescence polarization method using a rod-like probe of ~2.5 nm. Upon stretching, any film of both series imparted a positive orientation function, i.e., f = (3 <cos² ω> − 1)/2 > 0, which increased with the extent of deformation. The degree of molecular orientation was higher in the CDA-graft series with a semi-rigid trunk, and, in both series, it declined monotonically with increasing content of the PLLA side-chain. With regard to the optical anisotropy, CDA-g-PLLA films always exhibited a positive birefringence (Δn > 0) upon stretching, while drawn films of P(VAc-co-VOH)-g-PLLA displayed a negative one. This contrast in polarity reflects a difference in the intrinsic birefringence between the two trunk polymers. Of interest was the finding of a discontinuous change in Δn value with copolymer composition (PLLA content) for the respective graft series, when compared at a given stage of elongation of the films. Discussion took into consideration the locally different orientation manners of the attached PLLA chain segments.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

Thermal analysis characterization of PAAm-<Emphasis Type="Italic">co</Emphasis>-MC hydrogels

This paper reports the thermal characterization of polyacrylamide-co-methylcellulose hydrogels and the constituent monomers (acrylamide and methylcellulose). Polymeric materials can be used to produce hydrogels, which can be natural, synthetic, or a mixture. The hydrogels described here were obtained by free radical polymerization, in the presence of N,N′-methylene-bis-acrylamide as a cross-linker agent. Four acrylamide concentrations were used for the synthesis of hydrogels: 3.6, 7.2, 14.7, and 21.7% (w/v). The materials so obtained were analyzed by TG, DTG, DSC, and FT-IR. The TG curves of acrylamide and methylcellulose showed three mass loss events. In DSC curves, the acrylamide exhibited one melting peak at 84.5 °C, and methylcellulose indicated one exothermic event. Nevertheless, acrylamide was considered more stable than methylcellulose. The TG curves of the hydrogels exhibited three mass loss events, and on the DSC curves, three endothermic events were observed. It was verified that the different acrylamide proportions influenced the thermic behavior of hydrogels, and that the authors considered the 7.2% hydrogel a promising drug carrier system. The absorption bands were well defined, confirming the presence of the functional groups in the samples.     

Synthesis of <Emphasis Type="Italic">N,N</Emphasis>-disubstituted (<Emphasis Type="Italic">Z</Emphasis>)-<Emphasis Type="Italic">O</Emphasis>-methylnicotinamide oximes

A number of (Z)-N,N-dialkyl- and (Z)-N-acyl-N-alkyl-O-methylnicotinamide oximes was synthesized. Their configuration was confirmed by the NOESY experiment. Evaluation of fungicidal activity of compounds obtained was performed.     

Heterospin biradicals based on new piperidineoxyl-substituted 3,6-di-<Emphasis Type="Italic">tert</Emphasis>-butyl-<Emphasis Type="Italic">o</Emphasis>-benzoquinone

A nucleophilic addition reaction of 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (OH-TEMPO) to 3,6-di-tert-butyl-o-benzoquinone was used to obtain a new sterically hindered o-benzoquinone (1) containing 2,2,6,6-tetramethylpiperidineoxyl functional group, which was characterized by IR spectroscopy, mass spectrometry, elemental analysis, and X-ray diffraction. A one-electron reduction of 1 with potassium and thallium is an efficient method for the generation of earlier unknown heterospin biradicals 5a and 5b, respectively, containing nitroxide and o-semiquinone radical centers. Analysis of the hyperfine structure of the ESR spectra of biradicals 5a and 5b in solution showed that they belong to the group of heterospin biradicals with strong (J >> a) and fast exchange interaction between the radical centers.     

Synthesis of <Emphasis Type="Italic">o</Emphasis>(<Emphasis Type="Italic">m</Emphasis>)-carborane-containing azomethines

A method of preparative synthesis of o(m)-carborane-containing azomethines via the condensation of o(m)-carboranyl-C-methylene-4-formylbenzoates with aliphatic, cycloaliphatic, and aromatic amines was developed.     

Curing reaction of <Emphasis Type="Italic">o</Emphasis>-cresol-formaldehyde epoxy/LC epoxy(<Emphasis Type="Italic">p</Emphasis>-PEPB)/anhydride(MeTHPA)

The curing kinetics of a bi-component system about o-cresol-formaldehyde epoxy resin (o-CFER) modified by liquid crystalline p-phenylene di[4-(2,3-epoxypropyl) benzoate] (p-PEPB), with 3-methyl-tetrahydrophthalic anhydride (MeTHPA) as a curing agent, were studied by non-isothermal differential scanning calorimetry (DSC) method. The relationship between apparent activation energy E _a and the conversion α was obtained by the isoconversional method of Ozawa. The reaction molecular mechanism was proposed. The results show that the values of E _a in the initial stage are higher than other time, and E _a tend to decrease slightly with the reaction processing. There is a phase separation in the cure process with LC phase formation. These curing reactions can be described by the Šesták–Berggren (S–B) equation, the kinetic equation of cure reaction as follows: \frac\textda\textdt = Aexp( - \fracE_\texta RT )a^m ( 1 - a )ⁿ {\frac{{{\text{d}}\alpha }}{{{\text{d}}t}}} = A\exp \left( { - {\frac{{E_{\text{a}} }}{RT}}} \right)\alpha^{m} \left( {1 - a} \right)^{n} .     

Synthesis of new hydrazones based on <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzohydrazides

o- and p-Hydroxybenzohydrazides reacted with various unsaturated aromatic aldehydes to give the corresponding N′-(hydroxybenzoyl)hydrazones. Inhibitory activity of the obtained hydrazones against cathepsin E was evaluated.     

Molecular structure of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">o</Emphasis>-and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzyl)cytisine

The molecular structures of N-(o-and p-hydroxybenzyl)cytisine were investigated by NMR spectroscopy, x-ray structure analysis, and molecular modeling. It was found that NMR resonances of the OH and aromatic protons in N-(o-hydroxybenzyl)cytisine were doubled because of the presence of two conformers in solution. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 165–168, March–April, 2008.     

Synthesis of pyrano[2,3-<Emphasis Type="Italic">f</Emphasis>]chromen-2,8-diones and pyrano[3,2-<Emphasis Type="Italic">g</Emphasis>]chromen-2,8-diones based on <Emphasis Type="Italic">o</Emphasis>-hydroxyformyl(acyl)neoflavonoids

Novel pyrano[2,3-f]chromen-2,8-diones and pyrano[3,2-g]chromen-2,8-diones were prepared based on modified analogs of natural o-hydroxyformyl(acyl)neoflavonoids. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 15–20, January–February, 2008.