Bacterio- and lymphocytotoxicity of silver nanocomposite with sulfated arabinogalactan

The antibacterial activity and cytotoxicity of the silver-containing drug, which is zerovalent metallic silver nanoparticles stabilized by sulfated arabinogalactan, towards human lymphocytes were evaluated. The bacteriostatic concentration towards E. coli ATCC 25922, E. coli ESBL1224, S. aureus MRSA34R, S. aureus ATCC 29213, and P. aeruginosa ATCC 27853 and hospital strains E. coli, P. aeruginosa, and P. mirabilis ranges from 3 to 50 μg mL^?1. Their bactericidal activity varies from 5 to 100 μg mL^?1, and the concentration of the nanocomposite toxic to isolated human peripheral blood lymphocytes is 5 μg m^L?1.     

Synthesis and in vitro antibacterial evaluation of 6-substituted 4-amino-pyrazolo[3,4-<Emphasis Type="Italic">d</Emphasis>]pyrimidines

Pyrazolo[3,4-d]pyrimidines are one of the most important classes of fused heterocyclic compounds which exhibit a broad range of biological and medicinal properties. They are known as anticancer, antifungal, antibacterial, antiviral and anti-inflammatory agents. In this study, some new 6-substituted 4-amino-pyrazolo[3,4-d]pyrimidine derivatives were prepared via reaction of 5-amino-3-methyl-1-phenyl-1H-pyrazole-4-carbonitrile with various nitriles in the presence of sodium ethoxide as catalyst. The inhibitory properties of synthesized compounds were studied according to CLSI guidelines against some pathogenic bacteria including four gram-positive strains (Streptococcus pyogenes, Staphylococcus aureus, Bacillus cereus and Bacillus subtilis subsp. spizizenii) and three gram-negative strains (Pseudomonas aeruginosa, Shigella flexneri and Salmonella enterica subsp. enterica). The antibacterial effects of all derivatives were compared with those of antibiotics belonging to different classes. The values were reported as inhibition zone diameter (IZD), minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The effect of substituents on the biological activity of derivatives was discussed as well. The inhibitory effect of compound 6a, was shown to be the most, with MIC values in the range of 32–4096 μg/mL. Since most of the synthesized compounds were effective against Streptococcus pyogenes and Pseudomonas aeruginosa, they can be considered as inhibitors of these two bacteria.     

Removal of heavy metals and bacteria from aqueous solution by novel hydroxyapatite/zeolite nanocomposite,preparation, and characterization

In this study, a HAp/NaP nanocomposite was prepared by adding a synthesized nano-hydroxyapatite to zeolite NaP gel in the hydrothermal condition and used for the removal of lead(II) and cadmium(II) ions from aqueous solution. HAp/zeolite nanocomposite was then characterized by Fourier transform infrared spectroscopy, X-ray diffraction and Rietveld method, scanning electron microscope, energy-dispersive X-ray analysis, and surface area and thermal analyses. Results suggested that the nanocomposite crystals of HAp were dispersed onto the zeolite external surface and/or encapsulated within the zeolite channels and pores. The potential of the composite in adsorption of heavy metals was investigated by using batch experiment. The metal concentration in the equilibrium C _e (mg/g) after adsorption with nanocomposite of HAp/NaP was analyzed using flame atomic adsorption spectrometry. The adsorption experiments were carried out at pH of 3–9. The influences of contact time, initial concentration, dose, and temperature on the adsorption of lead and cadmium ions were also studied. Results show that these nanocomposites have further adsorption related to NaP and HAp. They have great potential (about 95 %) for Pb(II) and Cd(II) adsorption at room temperature. The equilibrium process was described by Frendlich, Langmuir, Temkin, and Dubinin–Radushkevich (D-R) models. The kinetics data were successfully fitted by a pseudo-second-order model. The in vitro antibacterial activity of these composites was evaluated against Bacillus subtilis (as Gram-positive bacteria) and Pseudomonas aeruginosa (as Gram-negative bacteria) and compared with standard drugs that show inhibition on bacterial growth.     

Europium and terbium Schiff base peptide complexes as potential antimicrobial agents against <Emphasis Type="Italic">Salmonella typhimurium</Emphasis> and <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis>

Eu(III) and Tb(III) Schiff base complexes are applicable in various fields such as sensing, assays, screening protocols in vitro, and imaging studies in vitro or in vivo. Fluorescent europium and terbium complexes and their interaction with cell penetrating peptide (KKKRKC) can represent an excellent key for understanding pathway of peptide transportation though cell membrane and the application of Schiff base complexes as potential antibacterial drugs. The Schiff base–metal complexes and its conjugates with peptide were tested for their antibacterial activity against Pseudomonas aeruginosa and Salmonella typhimurium. Schiff base–metal complexes conjugated with peptide show minor toxicity in normal human PNT1A cells and high antibacterial activity against P. aeruginosa and S. typhimurium, where IC50 down to 125.9 and/or 36.1 µM were found for P. aeruginosa and S. typhimurium, respectively. Our results strongly suggest that Schiff base–metal complexes conjugated with peptide have great potential to be developed into highly effective antibacterial drug.     

Gelatin/montmorillonite biohybrid films prepared via a novel photocrosslinking method: structure–properties investigations

Gelatin/sodium montmorillonite (Na⁺MMT) hybrid nanocomposite films were prepared by a new photocrosslinking method using 4-(2-hydroxyethoxy)phenyl-(2-hydroxy-2-propyl)ketone (Irgacure 2959) as a photoactive radical initiator and N,N′-Methylenebisacrylamide (MBA) as a crosslinking agent. The prepared samples were characterized by X-ray diffraction (XRD), differential scanning calorimetry, stress–strain measurements and UV–Vis spectrophotometry. XRD patterns showed the formation of exfoliation structure resulting in considerable improves in mechanical properties of the nanocomposite. Retaining of transparency also suggested that Na⁺MMT nanosheets were uniformly distributed in the gelatin matrix. The tensile strength and Elastic’s modulus of nanocomposites were also improved notably by enhancing amount of Na⁺MMT. Furthermore, gelatin/Na⁺MMT nanocomposites showed a second T _g at a higher temperature in presence of Na⁺MMT.     

Adsorption properties of aluminium oxide modified with palladium,gold, and cerium oxide nanoparticles

The adsorption properties of nanocomposites based on γ-Al₂O₃ modified with CeO_x, Au/CeO_x, and Pd/CeO_x nanoparticles with contents of deposited metals ranging from 0.07 to 1.71 wt % are investigated by means of dynamic sorption method. n-Alkanes (C₆–C₈), acetonitrile, diethyl ether, tetrahydrofuran, and dioxane are used as test adsorbates. Adsorption isotherms are measured, and the isosteric heats of adsorption of a number of test adsorbates are calculated. Electron-donor and electron-acceptor characteristics of the surfaces of γ-Al₂O₃-based nanocomposites are estimated. It is shown that Au(0.1%)/CeO_x(0.07%)/γ-Al₂O₃ nanocomposite, which has the lowest content of nanoparticles of the deposited metals, has the highest adsorption activity.     

Preparation of novel fluoroalkyl end-capped oligomers/polyaniline and/<Emphasis Type="Italic">N,N′</Emphasis>-diphenyl-1,4-phenylenediamine nanocomposites

Fluoroalkyl end-capped acrylic acid oligomer [R_F-(ACA)_n-R_F]/, 2-(methacryloyloxy)ethanesulfonic acid oligomer [R_F-(MES)_n-R_F]/, 2-acrylamido-2-methylpropanesulfonic acid oligomer [R_F-(AMPS)_n-R_F]/polyaniline [PAn] nanocomposites were prepared by the polymerization of aniline initiated by ammonium persulfate in the presence of the corresponding oligomers, respectively. These fluorinated oligomers were also applied to the preparation of the corresponding fluorinated oligomers/phenyl-capped aniline dimer (An-dimer: N,N′-diphenyl-1,4-phenylenediamine) nanocomposites by the interaction of the fluorinated oligomers with An-dimer. These fluorinated composites thus obtained were found to afford nanometer size-controlled fine particles possessing a good dispersibility and stability in water and traditional organic media such as methanol. UV–vis spectra of R_F-(MES)_n-R_F/PAn nanocomposites and R_F-(AMPS)_n-R_F/PAn nanocomposites showed the similar absorption peaks around 350, 430, and 780 nm to those of the usual Brønsted acid-doped PAn; however, interestingly, R_F-(ACA)_n-R_F/PAn nanocomposites were found to exhibit only an absorption peak around 430 nm based on the polaron transition.

Open image in new window

Figure  

     

Phytochemical fabrication,characterization, and antioxidant application of copper and cobalt oxides nanoparticles using <Emphasis Type="Italic">Sesbania sesban</Emphasis> plant

In this work, an ecofriendly and economic strategy for synthesize of CuO and Co₃O₄ were developed using extracted Sesbania sesban solution (ESS) as a reducing and stabilizing agent, and bioreactor. These novel nano metal oxides (NMOs) were characterized by high-resolution-transmission electron microscopy (TEM), EDAX thermo gravimetric analysis and X-ray diffraction (XRD). Morphology and size of them were investigated by TEM and the average sizes of for spherical CuO and Co₃O₄ nanoparticles are 20–40 and 15–30 nm, respectively. The XRD and EDAX confirmed the high purity for NMOs. The thermal behaviors of the NMOs exhibited good crystallographic stability within the investigated temperature range. The antioxidant and antibacterial activities of NMOs were investigated and compared to manganese(III) meso-tetraphenylporphyrin complex/Ag nanocomposite (Ag/P nanocomposite) synthesizing by ESS. The results obtained from this work showed that copper(II) oxide, cobalt oxide nanoparticles, and Ag/P nanocomposite have DPPH scavenging activity. On the other hand, NMOs have no antibacterial activity against Gram-negative bacterial strains. Cobalt oxide nanoparticles have antibacterial activity against Staphylococcus aureus, while Ag/P nanocomposite showed the antibacterial activities against both Gram-negative and Gram-positive bacterial strains.     

Synthesis,characterization, antimicrobial activity and ultrastructure of the affected bacteria of new quinoline compounds

The reaction on 8-hydroxy quinoline-7-aldehyde azo compounds (HL _n ) (where n = 1–5) with 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one to obtain HL _n (where n = 6–10) have been characterized by means of TLC, melting point and spectral data, such as IR, ¹H NMR, mass spectra and thermal studies. The X-ray diffraction patterns of two starting materials 8-hydroxy quinoline-7-aldehyde (start 1), 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one (start 2) and the ligands (HL_5,10) are investigated in powder form. All the ligands have been screened for their antimicrobial activity against four local bacterial species, two Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) as well as against four local fungi; Aspergillus niger, Alternaria alternata, Penicillium italicum and Fusarium oxysporium. The results show that the azo ligands (HL _n ) (where n = 1–5) have no antimicrobial activity against bacteria and fungi while most azomethine ligands (HL _n ) (where n = 6–10) are good antibacterial agents against E. coli and K. pneumoniae as well as antifungal agents against P. italicum and A. alternata. The results were compared to standard substances (start 1) and (start 2). Among the azomethine ligands, HL₁₀ was the most effective against the most microorganisms tested. The size of clear zone was ordered as p-(OCH₃ < CH₃ < H < Cl < NO₂) as expected from Hammett’s constant (σ ^R ). Also, the ultrastructure study of the affected bacteria confirmed that HL₈ is good antibacterial agent against E. coli and S. aureus.     

Magnetic,Electrical and Thermal Studies of Polypyrrole-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites

This research paper comprises of the synthesis of polypyrrole (PPy)-Fe₂O₃ nanocomposites by employing the in situ chemical oxidative polymerization method. The concentration of the filler material was adjusted between 10–50 wt % of PPy. The synthesized nanocomposites were characterized by using X-ray diffraction (XRD). Magnetic analysis and DC electrical conductivity of the samples were carried out using vibrating sample magnetometer (VSM) and two probe DC conductivity method, point towards magnetically active and electrically conductive samples. The magnetic parameters under applied magnetic field demonstrated that the values of coercivity (H _c ), saturation magnetization (M _s ) and remanence (M _r ) can be tailored by carefully controlling the amount of dopant material into the nanocomposites indicating their suitability for controllable switching devices and microwave absorption applications. The DC electrical conductivity showed an increase up to 20 wt % of filler material and thereafter a decrease in the conductivity of nanocomposites with increase in filler content is observed. Thermogravimetric analysis (TGA) showed an increase in thermal stability with an increase in ferrite content in nanocomposites.     

Enhanced Enzymatic Synthesis of a Cephalosporin,Cefadroclor, in the Presence of Organic Co-solvents

In this study, we investigated the enzymatic synthesis of a semi-synthetic cephalosporin, cefadroclor, from 7-aminodesacetoxymethyl-3-chlorocephalosporanic acid (7-ACCA) and p-OH-phenylglycine methyl ester (D-HPGM) using immobilized penicillin G acylase (IPA) in organic co-solvents. Ethylene glycol (EG) was employed as a component of the reaction mixture to improve the yield of cefadroclor. EG was found to increase the yield of cefadroclor by 15–45%. An investigation of altered reaction parameters including type and concentration of organic solvents, pH of reaction media, reaction temperature, molar ratio of substrates, enzyme loading, and IPA recycling was carried out in the buffer mixture. The best result was a 76.5% conversion of 7-ACCA, which was obtained from the reaction containing 20% EG (v/v), D-HPGM to 7-ACCA molar ratio of 4:1 and pH 6.2, catalyzed by 16 IU mL^?1 IPA at 20 °C for 10 h. Under the optimum conditions, no significant loss of IPA activity was found after seven repeated reaction cycles. In addition, cefadroclor exhibited strong inhibitory activity against yeast, Bacillus subtilis NX-2, and Escherichia coli and weaker activity against Staphylococcus aureus and Pseudomonas aeruginosa. Cefadroclor is a potential antibiotic with activity against common pathogenic microorganisms.     

Cryochemical synthesis and antibacterial activity of a hybrid composition based on Ag nanoparticles and dioxidine

Hybrid nanocomposites based on an dioxidine antimicrobial substance modified with silver were produced by means of cryochemical synthesis. TEM, UV-absorption spectroscopy, X-ray diffraction, and surface analysis based on low-temperature argon adsorption showed the formation of hybrid nanosystems consisting of drug substance particles with a size of 50–300 nm including internal small Ag nanoparticles with a size of 2–40 nm. The obtained hybrid nanosystems showed higher antibacterial activity against E. coli 52, S. aureus 144, and M. cyaneum 98 than did the original dioxidine.     

Transparent flexible ZnO/MWCNTs/pbma ternary nanocomposite film with enhanced mechanical properties

Functional organic-inorganic nanocomposites with high transparency show significant potential application in many fields. However, it is still a great challenge to prepare flexible transparent nanocomposites due to the intrinsic stiffness of the nanoparticles and the poor interaction between nanoparticles and organic matrices. In this work, a transparent ternary nanocomposite film with enhanced mechanical performance is fabricated by two-steps. First, the transparent ternary ZnO/MWCNTs/n-butyl methacrylate (BMA) nanodispersion is prepared by mixing the ZnO/BMA and MWCNTs/BMA dispersions directly. Then, the ternary nanocoposites film is fabricated via in-situ bulk polymerization of the above nanodispersions. As a result, the tensile strength of the ZnO/MWCNTs/poly-n-butyl methacrylate (PBMA) ternary film is enhanced by 42% and the elongation at break is three times that of ZnO/PBMA nanocomposite. The hardness of the film increases from 5B to 1H with 40 wt% ZnO. These results indicate that ZnO and MWCNTs can improve the mechanical properties of the composite significantly. Importantly, the ternary nanocomposite film still remains high transparency and exhibit excellent UV-shielding performance. The as-prepared transparent multifunctional nanocomposite films have promising applications in optical materials and devices, such as optical filters, contact lenses and protection packing.     

Investigation of structural,rheological and thermal properties of PMMA/ONi-Al LDH nanocomposites synthesized <Emphasis Type="Italic">via</Emphasis> solvent blending method: Effect of LDH loading

This article addresses the synthesis of organically tailored Ni-Al layered double hydroxide (ONi-Al LDH) and its use in the fabrication of exfoliated poly(methyl methacrylate) (PMMA) nanocomposites. The pristine Ni-Al LDH was initially synthesized by co-precipitation method and subsequently modified using sodium dodecyl sulfate to obtain ONi-Al LDH. Nanocomposites of PMMA containing various amounts of modified Ni-Al LDH (3 wt%-7 wt%) were synthesized via solvent blending method to investigate the influence of LDH content on the properties of PMMA matrix. Several characterization methods such as X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), rheological analysis, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA), were employed to examine the structural, viscoelastic and thermal properties of PMMA/OLDH nanocomposites. The results of XRD and TEM examination confirm the formation of partially exfoliated PMMA/OLDH nanocomposites. The FTIR results elucidate that the characteristic bands for both pure PMMA and modified LDH are present in the spectra of PMMA/OLDH nanocomposites. Rheological analyses were carried out to examine the adhesion between polymer matrix and fillers present in the nanocomposite sample. The TGA data indicate that the PMMA nanocomposites exhibit higher thermal stability when compared to pure PMMA. The thermal decomposition temperature of PMMA/OLDH nanocomposites increases by 28 K compared to that of pure PMMA at 15% weight loss as a point of reference. In comparison with pure PMMA, the PMMA nanocomposite containing 7 wt% LDH demonstrates improved glass transition temperature (T _g) of around 3 K. The activation energy (E _a), reaction orders (n) and reaction mechanism of thermal degradation of PMMA/OLDH nanocomposites were evaluated using different kinetic models. Water uptake capacity of the PMMA/OLDH nanocomposites is less than that of the pure PMMA.     

Green Synthesis of Silver Nanoparticles Using <Emphasis Type="Italic">Commiphora caudata</Emphasis> Leaves Extract and the Study of Bactericidal Efficiency

The present study reports the synthesis of silver nanoparticles (Ag NPs) from silver nitrate solution using leaf extracts of Commiphora caudata. The formation of Ag NPs in the colloidal solution is confirmed by UV–Vis spectroscopy analysis. The identification of biomolecules is analyzed through fourier transform infrared spectroscopy. X-ray diffraction pattern shows that an average particle size of the synthesized nanoparticles are in the range of 40–24 nm. Field emission scanning electron microscopy and transmission electron microscopy confirm the formation Ag NPs in spherical shape. The photoluminescence study of the synthesized Ag NPs interprets the influence of C caudata leaf concentrations on emission behavior. Zeta potential measurement is carried out to determine the stability of synthesized Ag NPs. GC–MS analysis revealed that the C. caudata contained 11 compounds, such as Stigmasterol (24.14 %), Hexacosanoic acid, methyl ester (15.13 %) and 2-bromophenyl morpholine-4-carboxylate (11.71 %). The antibacterial activity of Ag NPs shows that these bio capped Ag NPs have higher inhibitory action for Escherichia coli, Klebsiella pheumoniea, Micrococcus flavus, Pseudomonas aeruginosa, Bacillus subtilis, Bacillus pumilus, Staphylococcus aureus.     

Substrate specificity and function of acetylpolyamine amidohydrolases from <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis>

Background

Pseudomonas aeruginosa, a Gram-negative, aerobic coccobacillus bacterium is an opportunistic human pathogen and worldwide the fourth most common cause of hospital-acquired infections which are often high mortality such as ventilator-associated pneumoniae. The polyamine metabolism of P. aeruginosa and particularly the deacetylation of acetylpolyamines has been little studied up to now. Results with other bacterial pathogens e.g., Y. pestis suggest that polyamines may be involved in the formation of biofilms or confer resistance against certain antibiotics.

Results

To elucidate the role of acetylpolyamines and their enzymatic deacetylation in more detail, all three putative acetylpolyamine amidohydrolases (APAHs) from P. aeruginosa have been expressed in enzymatic active form. The APAHs PA0321 and PA1409 are shown to be true polyamine deacetylases, whereas PA3774 is not able to deacetylate acetylated polyamines. Every APAH can hydrolyze trifluoroacetylated lysine-derivatives, but only PA1409 and much more efficiently PA3774 can also process the plain acetylated lysine substrate. P. aeruginosa is able to utilize acetylcadaverine and acetylputrescine as a carbon source under glucose starvation. If either the PA0321 or the PA1409 but not the PA3774 gene is disrupted, the growth of P. aeruginosa is reduced and delayed. In addition, we were able to show that the APAH inhibitors SAHA and SATFMK induce biofilm formation in both PA14 and PAO1 wildtype strains.

Conclusions

P. aeruginosa has two functional APAHs, PA0321 and PA1409 which enable the utilization of acetylpolyamines for the metabolism of P. aeruginosa. In contrast, the physiological role of the predicted APAH, PA3774, remains to be elucidated. Its ability to deacetylate synthetic acetylated lysine substrates points to a protein deacetylation functionality with yet unknown substrates.

     

Analysis of <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PAO1 Biofilm Protein Profile After Exposure to <Emphasis Type="Italic">n</Emphasis>-Butanolic <Emphasis Type="Italic">Cyclamen coum</Emphasis> Extract Alone and in Combination with Ciprofloxacin

Pseudomonas aeruginosa biofilm-related infections are the major cause of premature death in cystic fibrosis patients. Strategies to induce biofilm dispersal are of interest, because of their potential in preventing biofilm-related infections. Our previous work demonstrated that n-butanolic Cyclamen coum extract with ciprofloxacin could eliminate 1- and 3-day-old P. aeruginosa PAO1 biofilms. To gain new insights into the role of C. coum extract and its synergistic effect with ciprofloxacin in eliminating P. aeruginosa PAO1 biofilms, two-dimensional gel electrophoresis (2-DE) in combination with mass spectrometry-based protein identification were used. Changes in the bacterial protein expression were analyzed when 3-day-old biofilm cells were exposed to the C. coum extract alone and in combination with ciprofloxacin. Proteins involved in alginate biosynthesis, quorum sensing, adaptation/protection, carbohydrate and amino acid metabolism showed a weaker expression in the C. coum extract-ciprofloxacin-treated biofilm cells compared to those in the untreated cells. Interestingly, the proteome of C. coum extract-ciprofloxacin-treated biofilm revealed more resemblance to the planktonic phenotype than to the biofilm phenotype. It appears that saponin extract in combination with ciprofloxacin causes biofilm disruption due to several mechanisms such as motility induction, cell envelope integrity perturbation, stress protein expression reduction, and more importantly, signal transduction perturbation. In conclusion, exposure to a combination of biofilm dispersal such as saponin extract and antimicrobial agents may offer a novel strategy to control preestablished, persistent P. aeruginosa biofilms and biofilm-related infections.     

<Emphasis Type="Italic">Stachys lavandulifolia</Emphasis> and <Emphasis Type="Italic">Lathyrus</Emphasis> sp. Mediated for Green Synthesis of Silver Nanoparticles and Evaluation Its Antifungal Activity Against <Emphasis Type="Italic">Dothiorella sarmentorum</Emphasis>

In this study, silver nanoparticles (AgNPs) were biosynthesized using Stachys lavandulifolia and Lathyrus sp. The first sign of the reduction of silver ions to AgNPs was the change in color of S. lavandulifolia and Lathyrus sp. extracts changed into dark brown and auburn after treating with silver nitrate, respectively. The UV–Vis spectroscopy of reaction mixture (extract+silver nitrate) produced by S. lavandulifolia and Lathyrus sp. showed the strong adsorption peaks at ?440 and 420 nm, respectively. The transmission electron microscope images showed the synthesis of AgNPs using S. lavandulifolia and Lathyrus sp. with an average size of 7 and 11 nm, respectively. The result of X-ray diffraction pattern showed four diffraction peaks at 38°, 44°, 64°, and 77° for both types of biosynthesized AgNPs. Fourier transform infrared spectroscopy showed the possible role of involved proteins and polyhydroxyl functional groups in the synthesis process of AgNPs. Inductively coupled plasma analysis determined the conversion rate (percentage) of silver ions to silver nanoparticles in reaction mixtures of S. lavandulifolia and Lathyrus sp. 99.73 and 99.67 %, respectively. In addition, antifungal effect of AgNPs, synthesized by both extracts, was studied separately on mycelial growth of Dothiorella sarmentorum, in a completely randomized design on potato dextrose agar (PDA) medium. The inhibition rate of mycelial growth was strongly depended on the density of AgNPs and it strongly increased with increasing the density of AgNPs in the PDA medium. AgNPs more than 90 % of them inhibited from the mycelia growth of the fungus at the concentration of 40 µg/mL and higher.     

Apparent Molar Volumes of Aqueous Solutions of Magnesium Tetraborate from 283.15 to 363.15 K and 0.1 MPa

Densities for aqueous solutions of magnesium tetraborate MgB₄O₇(aq) at the molalities of (0.00556–0.03341) mol·kg^?1 were measured with an Anton Paar Digital vibrating-tube densimeter at temperature intervals of 5 K from 283.15 to 363.15 K and 0.1 MPa. Apparent molar volumes were obtained based on the experimental density data, and the 3D diagrams of the apparent molar volume (V _? ) of MgB₄O₇(aq) against temperature (T) and molality (m) were plotted. On the basis of the Vogel–Tamman–Fulcher equation, the coefficients of the correlation equation for densities of MgB₄O₇(aq) against temperature and molality were parameterized. According to the Pitzer ion-interaction model of the apparent molar volume, the temperature correlation equations of Pitzer single-salt parameters F(i,p,T)?=?a₀?+?a₁?×?T?+?a₂?×?T ²?+?a₃/T?+?a₄?×?ln(T)?+?a₅?×?T ³ (where T is temperature in Kelvin, a _i are model parameters) for MgB₄O₇ were obtained for the first time.     

Catalytic and antibacterial evaluation of silver nanoparticles synthesized by a green approach

In this work, silver nanoparticles were synthesized using Salvia microphylla Kunth leaves extract as reducing agent and stabilizing agent. The effect of reaction time and plant extract amount on the biosynthesized nanoparticles were studied. The UV–Vis spectrum indicated that silver nanoparticles show a characteristic surface plasmon resonance at 427 nm. X-ray diffraction experiments show that the silver nanoparticles have a face-centered cubic crystal structure. The density of nanoparticles increases with increasing extract concentration and reaction time. TEM and SEM observations showed well-dispersed quasi-spherical nanoparticles sized in the range of 15–45 nm. The FT-IR analysis suggested the involvement of phenolic compounds in the reduction and stabilization of silver nanoparticles. Synthesized silver nanoparticles showed good antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. Finally, the catalytic properties of silver nanoparticles were demonstrated through the degradation of congo red and methyl orange.