Optimization of conductivity detection of low-molecular-mass anions in capillary zone electrophoresis

The optimization of background electrolyte compositions for capillary zone electrophoresis in combination with conductivity detection focusing on maximal detector response is discussed. A theoretical approach pointing out the influence of the electrolyte co- and counter-ion mobilities on the detector signal has been developed. Using this model, running buffer compositions providing optimum S/N ratios for the selected analytes could be calculated. The results derived from these examinations have been verified by experimental investigations, namely the determination of inorganic and organic anionic solutes.     

Routine determination of major anions in atmospheric aerosols by capillary electrophoresis

Capillary electrophoresis (CE) with indirect UV detection utilizing a pyromellitate-based electrolyte was used for the routine analysis of major anions in atmospheric aerosols collected on filters with high-volume (Hi-Vol) samplers. The long-term reliability of the CE system was checked over an 8-month period during which over 2900 samples were analyzed. In addition, approximately 1100 samples were analyzed in parallel by ion chromatography (IC). It has been shown that acceptable analytical performance can be routinely obtained. The agreement between the CE and IC results is good, generally better than 20% at concentrations larger than 1 mg l⁻¹.     

Determination of phosphate in natural waters by capillary electrophoresis Influence of solution composition on migration time and response

This paper deals with the determination of the more complex phosphate anion by capillary electrophoresis using indirect UV detection. First, the pH of the running electrolyte influences both the migration time and the response of the phosphate anion. Both effects could be explained well by taking into account phosphorus speciation in solution. In addition, the experimental method has been applied to three different sets of natural water systems; (i) groundwater, (ii) surface water and (iii) stemflow samples. The migration time behaviour of phosphate was different for the three sample sets and, hence, difficulties arise with respect to a clear and unique identification of the compound. Deviations herein could be minimized by applying a correction method for migration time drift. Concentrations of phosphate could be quantified in most samples and were confirmed by a calorimetric method. Average recoveries of additions of phosphate to groundwater, surface water and stemflow samples were 105, 83 and 103%, respectively. For one stemflow sample, quantitative recovery of phosphate was possible only by changing the pH of the running electrolyte solution. The latter observation might be very useful in setting up speciation-related measurement methods.     

Factors affecting selectivity of inorganic anions in capillary electrophoresis

Capillary zone electrophoretic separations of inorganic anions are largely governed by the intrinsic (infinite dilution) mobility of the anion. This in turn is a function of the hydrodynamic friction caused by the size of the ion and the dielectric friction caused by the charge density of the anion re-orienting the surrounding solvent. The influence of these factors on the mobility of anions is examined in both water and nonaqueous solvents. The influence of other experimental parameters, such as ionic strength, ion association, electroosmotic flow modifier concentration, and the addition of complexing agents such as polymeric cations, cyclodextrins, crown ethers and cryptands are also reviewed. From this discussion, some rules of thumb as to when different approaches will be most effective are drawn.     

Simultaneous separation of inorganic anions and cations by capillary zone electrophoresis

A new capillary electrophoretic approach for simultaneous separation of fast anions and cations is demonstrated. Indirect UV detection at 214 nm in conjunction with electromigration sampling from both ends of the capillary was developed. Two electrolyte systems based on imidazole-nitrate and copper(II)-ethylenediamine-nitrate were investigated for the simultaneous separation of chloride, sulphate, hydrocarbonate, potassium, ammonium, calcium, sodium and magnesium ions. Experimental parameters that were evaluated included a nature of UV chromophore, pH of electrolyte, a nature of complexing agent. The method permits the excellent separation of three anions and five cations in only 4 min using electrolyte system containing 2.5 mmol l⁻¹ Cu(NO₃)₂, 5 mmol l⁻¹ ethylenediamine and 1 mmol l⁻¹ fumaric acid at pH 8.5 adjusted with tetraethylammonium hydroxide.     

Separation of inorganic anions in acidic solution by capillary electrophoresis

Inorganic anions are almost always determined by capillary electrophoresis (CE) at an alkaline pH, so the analytes will be fully ionized. However, a long-chain quaternary ammonium salt usually must be added as a flow modifier to the carrier electrolyte to reverse the direction of the electroosmotic flow. By working at a sufficiently acidic pH, the electroosmotic flow in fused-silica capillaries is virtually eliminated, and anions can be separated simply by differences in their electrophoretic mobilities. Excellent separations were obtained for AuCl₄⁻ and the chloro complexes of platinum group elements in HCl solution at pH 2.0 to 2.4. No additional buffer or flow modifier was needed. This CE technique is an excellent way to follow slow hydrolytic reactions in which one or more of the chloride ligands is replaced by water. Sharp peaks and good separations were also obtained for MnO₄⁻, VO₃⁻, chromate, molybdate, ferrocyanide, ferricyanide and stable complex ions such as chromium oxalate (CrO₃³⁻).     

Sample stacking of fast-moving anions in capillary zone electrophoresis with pH-suppressed electroosmotic flow

On-line sample concentration of fast moving inorganic anions by large volume sample stacking (LVSS) and field enhanced sample injection (FESI) with a water plug under acidic conditions is presented. Detection sensitivity enhancements were around 100 and 1000-fold for LVSS and FESI, respectively. However, reproducibility and linearity of response in the LVSS approach is superior compared to the FESI approach.     

New preconditioning strategy for the determination of inorganic anions with capillary zone electrophoresis using indirect UV detection

It is widely accepted that preconditioning procedures are indispensable in capillary electrophoresis in order to achieve reproducibility of migration times and peak areas. Several preconditioning strategies have been employed for electrophoretic determinations of inorganic anions using indirect UV detection including simple flushing with buffer or alkaline or acid pre-rinsing followed by flushing with electrolyte. We investigated the influence of various preconditioning strategies on the reproducibility of migration times and peak areas of inorganic anions. The electrolyte systems for indirect UV detection were based on pyromellitic acid and chromic acid respectively as UV absorbing probes and hexamethonium hydroxide as electroosmatic flow modifier. Preconditioning agents under investigation were electrolyte buffer, NaOH, HCl and the free acids of the UV absorbing probes. Investigations showed that reproducibility of migration times and peak areas can be significantly improved by acid pre-rinsing using the corresponding acid of the UV absorbing probes compared to preconditioning by flushing the capillary with buffer. In contrast to acid pre-rinsing using hydrochloric acid no interfering signals within the migration time window of inorganic anions under investigation can be observed. The optimized preconditioning procedure yields relative standard deviations of migration times less than 0.25% (n=10). Relative standard deviations of corrected peak areas were below 5% applying acid preconditioning using pyromellitic acid.     

Determination of inorganic anions in Kraft pulping liquors by capillary electrophoresis

Various sulfur containing anions (sulfate, sulfite, and thiosulfate) in Kraft pulping process liquors are determined by capillary electrophoresis. In addition, other inorganic anions (hydroxide, chloride, oxalate, carbonate) are analyzed with the developed method. Through optimization of the separation conditions it is possible to simultaneously determine these anionic species in pulping liquors with direct and indirect UV detection at 185, 214, and 254 nm. To ensure short separation times a migration of the anionic analytes in the same direction as the electroosmotic flow (co-electroosmotic CE) is established by reversal of the electroosmotic flow with 1,5-dimethyl-1,5-diazaundecamethylene polymethobromide (hexadimethrine bromide; HDB; polybrene™) which is added to the electrolyte as EOF modifier. The impact of acetonitrile as organic modifier to improve the selectivity of the anionic analytes is also investigated. The developed method is then applied to analyze and quantify various anions in pulping liquors (white and black liquors). By simultaneously determining the hydroxide concentration it is possible to calculate effective alkalinity and sulfidity with the measured concentrations without the need of volumetric methods.     

Determination of anions in landfill leachates by ion chromatography

Ion chromatography has been used to determine inorganic and organic anions within landfill leachates. Two procedures are operated on split samples which have multiple dilutions and vary in sample treatment: gradient ion-exchange chromatography for inorganic anions and isocratic ion-exclusion chromatography for organic anions. Interference between carbonate and organic acid anions using ion-exclusion chromatography is avoided by treatment with octanesulphonic acid eluent. Using ion-exchange chromatography, the presence of valerate, hexanoate and heptanoate is checked (but not quantified) for a subsample which has been treated to remove chloride; these species are then determined by ion-exclusion chromatography. Analysis of certified standards (10 mg/1 certified VFA standard; Supelco, Bellefonte, PA, USA; 20–150 mg/l inorganic anions, ICMIX1-100, Glen Spectra Reference Materials, Middlesex, UK) gives good agreement (within 5% for organic anions except formate, and within 1% for inorganic anions), with R.S.D. values for all anionic species varying from 0.44–2.23.     

Performance of ion chromatography in the determination of anions and cations in various natural waters with elevated mineralization

The performance of ion chromatography in the determination of anions and cations in natural mineral waters of different composition and different total mineralization was evaluated. Up to 12 ions of the 20 usually included in extended chemical analysis of natural waters were successfully determined by ion chromatography alone. At least 98.60% and up to 99.96% of total cation composition of mineral waters was determined by ion chromatography. Hydrogen carbonate predominated in anion composition of mineral waters and was determined titrimetrically. The percentage of anions determined by ion chromatography in the remaining anion composition of mineral waters was between 98.90% and 99.96%. The agreement between total concentrations of anions and cations in individual mineral waters determined predominantly by ion chromatography is very good and the performance of ion chromatography for the basic and for the extended chemical analysis of highly mineralized water samples is very high. Method development was assisted by previously developed algorithms and appropriate experimental conditions are also discussed.     

Determination of inorganic anions, carboxylic acids and amino acids in plant matrices by capillary zone electrophoresis

Summary Physiological investigations of solute transport in plants affords knowledge of solute distribution between different tissues. Capillary electrophoresis using indirect UV and laser induced fluorescence (LIF) detection is demonstrated as a useful technique for the simultaneous determination of inorganic anions, amino acids and carboxylic acids in plant samples. Cell sap obtained from plant tissues as well as simple ethanolic or aqueous plant extracts can be analysed directly without any pretreatment. This matrix stability and the very small volumes required allow fast determinations of various compounds in small plant tissue sections. In the case of carboxylic acids, resolution can be optimized using calcium for selective complexation of some of the compounds. Selective and sensitive determination of amino acids is possible using precolumn derivatisation with orthophthaldialdehyde (OPA) and laser induced fluorescence detection. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Application of an external contactless conductivity detector for the analysis of beverages by microchip capillary electrophoresis

Quantitative total ionic analysis of alcoholic and nonalcoholic beverages was performed by microchip capillary electrophoresis with external contactless conductivity detection. An electrolyte solution consisting of 10.5 mM histidine, 50 mM acetic acid, and 2 mM 18-crown-6 at pH 4.1 was used for the determination of NH(4) (+), K(+), Ca(2+), Na(+), and Mg(2+). Fast analysis of Cl(-), NO(3) (-), and SO(4) (2-) was achieved in 20 mM 2-(N-morpholino)ethanesulfonic acid /histidine electrolyte solution at pH 6.0 and the simultaneous separation of up to 12 inorganic and organic anions was performed in a solution containing 10 mM His and 7 mM glutamic acid at pH 5.75. Limits of detection ranged from 90 to 250 mug/L for inorganic cations and anions, and from 200 to 2000 mug/L for organic anions and phosphate. Calibration curves showed linear dependencies over one to two orders of magnitude when the stacking effect was minimized by injecting standard solutions prepared in background electrolyte solutions. Total analysis times of 35 and 90 s were achieved for the determination of 5 inorganic cations and for the simultaneous determination of 12 inorganic and organic anions, respectively, which represents a considerable reduction of analysis time compared to conventional separation methods used in food analysis.     

Low-molecular-mass anion screening for forensic environmental analyses by capillary zone electrophoresis with indirect UV detection

A method for low-molecular-mass anion screening is described using a buffer composed of 5-sulfosalicylate (SS) as a visualizing ion, hexadimethrine bromide as an electroosmotic flow modifier and Tris as a pH buffer component, at pH 8.6. All ions with effective mobility higher than 2610⁻⁹ m² s⁻¹ V⁻¹ can be separated within 7.5 min under −30 kV. By using the moderately mobile SS (5410⁻⁹ m² s⁻¹ V⁻¹), not only the sensitivity of the detection is improved due to its high UV absorptivity, but also a smaller overall overloading effect is achieved. Meanwhile, the resolution of the high mobility ions, which is normally critical, remains almost the same as compared to a chromate buffer. With an electrokinetic injection, the limit of detection (LOD) of the common ions is 2–13 nM and the detection range is linear up to 0.5–3 μM. With a hydrostatic injection the LOD is 0.15–1 μM and the detection range is linear up to 25–200 μM. The identification of ions is performed by comparing the mobility of the ions with that of standards, taking the apparent and effective mobility of HCO₃⁻, which is normally present in the sample solution, as a reference.     

Fingerprinting postblast explosive residues by portable capillary electrophoresis with contactless conductivity detection

A portable capillary electrophoretic system with contactless conductivity detection was used for fingerprint analysis of postblast explosive residues from commercial organic and improvised inorganic explosives on various surfaces (sand, concrete, metal witness plates). Simple extraction methods were developed for each of the surfaces for subsequent simultaneous capillary electrophoretic analysis of anions and cations. Dual‐opposite end injection principle was used for fast (<4 min) separation of 10 common anions and cations from postblast residues using an optimized separation electrolyte composed of 20 mM MES, 20 mM l ‐histidine, 30 μM CTAB and 2 mM 18‐crown‐6. The concentrations of all ions obtained from the electropherograms were subjected to principal component analysis to classify the tested explosives on all tested surfaces, resulting in distinct cluster formations that could be used to verify (each) type of the explosive.     

氯霉素的高效毛细管电泳分离-电导检测

在熔融石英毛细管(50μmi.d×50cm)中,以6mmol/LH3BO3 2mmol/L硼砂 体积分数0.02%TEPA(四乙烯五胺)为电泳运行介质,分离电压-15.0kV,采用毛细管电泳-电导检测法在4min内实现了氯霉素的分离检测。讨论了电渗流抑制剂的浓度、缓冲体系的组成和浓度等因素对检测结果的影响。线性检测范围为1~120mg/L,检出限为0.3mg/L。对市售氯霉素滴眼液和注射液中的氯霉素进行分析,加标回收率为93.8%~106.8%。     

Simultaneous determination of inorganic anions, calcium and magnesium by suppressed ion chromatography

Suppressed conductimetric detection ion chromatography (IC) was investigated for the separation and detection of common inorganic anions, calcium and magnesium by anion-exchange chromatography using a sodium carbonate-EDTA mobile phase. The formation of anionic Ca2+ -EDTA and Mg2+ -EDTA complexes allowed its separation from other inorganic anions opening the way for their simultaneous determination in a single chromatographic run. The effect of the pH, carbonate and EDTA concentrations in the eluent and the previous addition of EDTA to the samples has been studied. The optimised experimental conditions were applied to the determination of Ca2+ and Mg2+ in mineral waters with results in agreement with alternative ICP-MS methodologies.     

Sensitive determination of anions in saliva using capillary electrophoresis after transient isotachophoretic preconcentration

A transient isotachophoresis-capillary electrophoresis (tITP-CE) system for the determination of minor inorganic anions in saliva is described. The complete separation and quantification of bromide, iodide, nitrate, nitrite, and thiocyanate has been achieved with only centrifugation and dilution of the saliva sample. In-line tITP preconcentration conditions, created by introduction of the plugs of 5 mM dithionic acid (leading electrolyte) and 10 mM formic acid (terminating electrolyte) before and after the sample zone, respectively, allowed the limits of direct UV absorption detection (at 200 nm) to be up to 50-fold improved as compared with CE without tITP. As a result, nitrate and thiocyanate were still detectable at 4.6 and 3.8 μg l⁻¹, respectively, in 1000 times diluted saliva. The daily variations of anionic concentrations in saliva samples taken from a smoking health volunteer were discussed based on the results of tITP-CE analysis. It was confirmed that the thiocyanate concentration in saliva noticeably increased after smoking. This is apparently the first report on simultaneous quantification of more than four anionic salivary constituents using CE.     

Determination of anionic trace impurities in glycerol by capillary isotachophoresis with enlarged sample load

Glycerol of different quality classifications served as a model for a neutral excess component in the isotachophoretic determination of low-molecular-mass anionic trace impurities. Potential anionic contaminants such as nitrate, sulphate, chlorate, nitrite, oxalate, fluoride formate and phosphate were analysed up to an analyte-to-excess ratio of 1:4·10⁷, thus providing the possibility of checking the sample for the mentioned analytes in the order of 2.5·10⁻⁶–9.5·10⁻⁶%. Because we used a column-coupling isotachophoretic instrument the electrolyte system consisted of two different leading electrolytes, one for the pre-separation (10 mmol/l HCl, β-alanine, pH 3.2) in the first capillary and one for the final separation (5 mmol/l HCl, 1,3-bis[tris(hydroxymethyl)methylamino]propane, β-alanine, pH 3.6) in the second capillary. The terminating electrolyte was citric acid. Due to an increased injection volume of 300 μl, limits of detection (LODs) in the nanomolar range were realised by conductivity detection. The developed method allows simultaneous analysis without sample preparation and/or preconcentration within 25 min and is for that reason suitable for in-place process control.     

Chemiluminescence nitrogen detection in ion chromatography for the determination of nitrogen-containing anions

Chemiluminescence nitrogen detection (CLND) provides equimolar response for nitrogen-containing ions such as nitrate, nitrite, cyanide, ammonium and tetradecyltrimethylammonium. Only azide yields a lower response. Nitrite, azide and nitrate are separated on a Dionex AS11 column using 5 mM NaOH as eluent with a 3 μM (1 ng N) limit of detection. Matrices, such as 1:10 diluted seawater, do not degrade these detection limits. CLND also provides equally sensitive (limit of detection 3 μM, 78 ppb) detection of weak acids such, as cyanide, which yield poor sensitivity with suppressed conductivity detection.