Reaction of arylthiacyclanylsulfonium salts with nitrogen bases

When arylthiacyclanylsulfonium salts are heated with nitrogen bases the C-S bond of the heteroring undergoes quantitative cleavage and the base adds to form a C-N bond. These sulfonium salts react with ammonia or pyridine to give ammonioalkyl sulfides; amino sulfides and secondary amine salts are obtained with excess secondary amines. The described reaction is a new preparative method for the synthesis of amino sulfides and ammonioalkyl aryl sulfides.     

The application of nanostructured transition metal sulfides as anodes for lithium ion batteries

With wide application of electric vehicles and large-scale in energy storage systems, the requirement of secondary batteries with higher power density and better safety gets urgent. Owing to the merits of high theoretical capacity, relatively low cost and suitable discharge voltage, much attention has been paid to the transition metal sulfides. Recently, a large amount of research papers have reported about the application of transition metal sulfides in lithium ion batteries. However, the practical application of transition metal sulfides is still impeded by their fast capacity fading and poor rate performance. More well-focused researches should be operated towards the commercialization of transition metal sulfides in lithium ion batteries. In this review, recent development of using transition metal sulfides such as copper sulfides,molybdenum sulfides, cobalt sulfides, and iron sulfides as electrode materials for lithium ion batteries is presented. In addition, the electrochemical reaction mechanisms and synthetic strategy of transition metal sulfides are briefly summarized. The critical issues, challenges, and perspectives providing a further understanding of the associated electrochemical processes are also discussed.     

Organische Phosphorverbindungen XXV Darstellung und Eigenschaften von sekundären und tertiären Phosphinsulfiden

Two new processes for the preparation of sec. phosphine sulfides which involve reaction of dialkylamino-dialkyl or diaryl phosphines with hydrogen sulfide, and of dialkylthionophosphonates, (RO)₂P(S)H, with GRIGNARD or organolithium reagents, respectively, are described. The addition of sec. phosphine sulfides to olefins and the condensation of sec. phosphine sulfides with N-hydroxymethyldialkylamines are reported. The conversion of tert. Phosphine sulfides to the corresponding tert. phosphine oxides is readily achieved with hydrogen peroxyde. The physical properties of several new unsymmetrical tert. phosphine sulfide and oxides are listed.     

Regioselective synthesis of quinolone-annulated sulfur heterocycles by aryl radical cyclization

The tin hydride-mediated cyclizations of a number of sulfides and sulfones under mild, neutral conditions, have been investigated accompanied by some amount of β-scission product for sulfides. The sulfides were derived from 4-mercaptoquinolone and 2-bromobenzyl bromides by phase transfer catalyzed reaction and the corresponding sulfones were prepared by treatment of the sulfides with m-CPBA at room temperature. The sulfides and the corresponding sulfones were then reacted with ⁿBu₃SnH-AIBN to give regioselective quinolone-annulated sulfur heterocycles.     

Pd‐NHC‐Catalyzed Alkynylation of General Aryl Sulfides with Alkynyl Grignard Reagents

Cross‐coupling reactions of unactivated aryl sulfides with alkynylmagnesium chloride have been invented to afford 1‐aryl‐1‐alkynes with the aid of a palladium/N‐heterocyclic carbene complex. This reaction has by far the widest scope of all transformations utilizing aryl sulfides and alkynes, while known cross‐coupling alkynylations of aryl‐sulfur electrophiles require activated azaaryl sulfides, thiolactams, or arenesulfonyl chlorides. The alkynylation of aryl sulfides is compatible with typical protecting functional groups. The alkynylation is applied to the synthesis of benzofuran‐based fluorescent molecules by taking advantage of characteristic organosulfur chemistry.     

金属催化硫醚的不对称氧化研究进展

手性金属络合物催化硫醚的不对称氧化是合成手性亚砜最有效的方法. 理性设计各种手性金属络合物催化剂应用于催化对映选择性氧化潜手性硫醚反应中, 近年来引起了化学家们较大的关注. 综述了各类手性金属络合物催化剂在硫醚不对称氧化中的应用.     

Mechanism of the oxidation of sulfides by dioxiranes. 1. Intermediacy of a 10-S-4 hypervalent sulfur adduct

Earlier studies established that dimethyldioxirane (1a) reacts with sulfides 2 in two consecutive concerted electrophilic oxygen-transfer steps to give first sulfoxides 3 and then sulfones 4. The same sequential electrophilic oxidation model was assumed for the reaction of sulfides 2 with the strongly electrophilic methyl(trifluoromethyl)dioxirane (1b). In this paper we report on a systematic and general study on the mechanism of the reaction of simple sulfides 2 with DMDO (1a) and TFDO (1b) which provides clear evidence for the involvement of hypervalent sulfur species in the oxidation process. In the oxidation of sulfides 2a-c, diphenyl sulfide (2d), para-substituted aryl methyl sulfides 2e-i, and phenothiazine 2k with 1b, the major product was the corresponding sulfone 4, even when a 10-fold excess of sulfide relative to 1b was used. The sulfone:sulfoxide 4:3 ratio depends among other factors on the dioxirane 1a or 1b used, the sulfide substitution pattern, the polar, protic, or aprotic character of the solvent, and the temperature. The influence of these factors and also deuterium and (18)O tracer experiments performed allow a general mechanism to be depicted for these oxidations in which the key step is the reversible cyclization of a zwitterionic intermediate, 6, to form a hypervalent sulfur species, 7. The classical sequential mechanism which establishes that sulfides are oxidized first to sulfides and then to sulfones can be enclosed in our general picture of the process and represents just those particular cases in which the zwitterionic intermediate 6 decomposes prior to undergoing ring closure to afford the hypervalent sulfurane intermediate 7.     

Singlet oxygen promoted carbon-heteroatom bond cleavage in dibenzyl sulfides and tertiary dibenzylamines. Structural effects and the role of exciplexes

The C-heteroatom cleavage reactions of substituted dibenzyl sulfides and substituted dibenzylcyclohexylamines promoted by singlet oxygen in MeCN have been investigated. In both systems, the cleavage reactions (leading to benzaldehyde and substituted benzaldehyde) were slightly favored by electron-withdrawing substituents with rho values of +0.47 (sulfides) and +0.27 (amines). With dibenzyl sulfides, sulfones were also obtained whereas sulfoxide formation became negligible when the reactions were carried out in the presence of a base. Through a careful product study for the oxidation of dibenzyl sulfide, in the presence and in the absence of Ph2SO, it was established that sulfone and cleavage product (benzaldehyde) do not come by the same route (involving the persulfoxide and the hydroperoxysulfonium ylide) as required by the generally accepted mechanism (Scheme 1) for C-heteroatom cleavage reactions of sulfides promoted by singlet oxygen. On this basis and in light of the similar structural effects noted above it is suggested that dibenzyl sulfides and dibenzylamines form benzaldehydes by a very similar mechanism. The reaction with singlet oxygen leads to an exciplex that can undergo an intracomplex hydrogen atom transfer to produce a radical pair. With sulfides, collapse of the radical pair leads to an alpha-hydroperoxy sulfide than can give benzaldehyde by an intramolecular path as described in Scheme 3. With amines, the radical pair undergoes an electron-transfer reaction to form an iminium cation that hydrolyzes to benzaldehyde. From a kinetic study it has been established that the fraction of exciplex converted to aldehyde is ca. 20% with sulfides and ca. 7% with amines.     

A concise synthetic strategy to alkynyl sulfides via transition-metal-free catalyzed C-S coupling of 1,1-dibromo-1-alkenes with thiophenols

A novel synthetic strategy to alkynyl sulfides via transition-metal-free catalyzed C-S coupling of 1,1-dibromo-1-alkenes with thiophenols has been developed. The new strategy which avoided the transition-metal toxicities is environmental friendly and very important for alkynyl sulfides synthesis.     

Electrolytic partial fluorination of organic compounds: 89: Regioselective anodic fluorination of tetrazolyl sulfides

Anodic fluorination of five-membered nitrogen-containing heterocyclic sulfides like tetrazolyl sulfides was comparatively studied. The anodic fluorination of tetrazolyl sulfides having α-electron-withdrawing groups was successfully carried out to provide α-monofluorinated tetrazolyl derivatives in moderate yields. This is in sharp contrast to the low efficient anodic fluorination of triazolyl sulfides. Thus, it was found that the efficiency of anodic fluorination is greatly affected by the basicity of the heterocyclic groups of the starting heterocyclic sulfides.     

Hemin-Promoted Direct C−H Thiolation in the Synthesis of Diaryl Sulfides

Diaryl sulfides are a class of important synthetic chemical units. Herein, we report a new method for direct preparation of diphenyl sulfides using P-toluenesulfonyl chloride as an effective thiophenyl radical precursor with assistance from Hemin. Various substituted anisoles and benzenesulfonyl chlorides are well tolerated, resulting in moderate to good yields of diaryl sulfides. The potential of the proposed method is validated by good yields obtained in gram scale reactions.     

Electronic and steric effects on the oxygenation of organic sulfides and sulfoxides with oxo(salen)chromium(V) complexes

The kinetics of oxygenation of several para-substituted phenyl methyl sulfides and sulfoxides with a series of 5-substituted and sterically hindered oxo(salen)chromium(V) complexes have been studied by a spectrophotometric technique. Though the reaction of sulfides follows simple second-order kinetics, sulfoxides bind strongly with the metal center of the oxidant and the oxygen atom is transferred from the oxidant-sulfoxide adduct to the substrate. The reduction potentials, E(red), of eight Cr(V) complexes correlate well with the Hammett sigma constants, and the reactivity of the metal complexes is in accordance with the E(red) values. The metal complexes carrying bulky tert-butyl groups entail steric effects. Organic sulfides follow a simple electrophilic oxidation mechanism, and the nonligated sulfoxides undergo electrophilic oxidation to sulfones using the oxidant-sulfoxide adduct as the oxidant. Sulfoxides catalyze the Cr(V)-salen complexes' oxygenation of organic sulfides, and the catalytic activity of sulfoxides is comparable to pyridine N-oxide and triphenylphosphine oxide. The rate constants obtained for the oxidation of sulfides and sulfoxides clearly indicate the operation of a pronounced electronic and steric effect in the oxygenation reaction with oxo(salen)chromium(V) complexes.     

Enhancing the efficiency of using electroplated iron and cobalt sulfides with a sublayer of NiC composite in a lithium battery

The efficiency of using in a lithium battery transition metal sulfides electroplated on a metal support strongly depends on the kind and relief of the support. To make the nickel support rougher for enhancing the adhesion of sulfides, it was electroplated with a nickel–carbon composite, NiC. The discharge capacity and the efficiency of cycling of iron and cobalt sulfides electroplated with a NiC sublayer were higher than in the case when the sulfides were electroplated on a smooth nickel support without composite coating.     

The first broad application of alkynyl sulfides as dienophiles in cobalt(I)-catalyzed Diels-Alder reactions

The cobalt(I)-catalyzed Diels-Alder reaction of nonactivated aryl alkynyl sulfides with acyclic 1,3-dienes generates dihydroaromatic vinyl sulfides under very mild reaction conditions, and these products can be oxidized with mild oxidants to the corresponding diaryl sulfides in good overall yields. The steric and electronic effects of substituents on the aryl, as well as on the alkynyl, moieties of the aryl alkynyl sulfide are discussed. While the cobalt catalyst system is quite efficient in converting alkynyl sulfides to the Diels-Alder adducts, the transformation of the corresponding aryl alkynyl sulfoxides and sulfones under similar mild reaction conditions gave only moderate yields of the desired adducts.     

Alloxazine-cyclodextrin conjugates for organocatalytic enantioselective sulfoxidations

Four structurally different alloxazine-cyclodextrin conjugates were prepared and tested as catalysts for the enantioselective oxidation of prochiral sulfides to sulfoxides by hydrogen peroxide in aqueous solutions. The alloxazinium unit was appended to the primary face of α- and β-cyclodextrins via a linker with variable length. A series of sulfides was used as substrates: n-alkyl methyl sulfides (n-alkyl = hexyl, octyl, decyl, dodecyl), cyclohexyl methyl sulfide, tert-butyl methyl sulfide, benzyl methyl sulfide and thioanisol. α-Cyclodextrin conjugate having alloxazinium unit attached via a short linker proved to be a suitable catalyst for oxidations of n-alkyl methyl sulfides, displaying conversions up to 98% and enantioselectivities up to 77% ee. β-Cyclodextrin conjugates were optimal catalysts for the oxidation of sulfides carrying bulkier substituents; e.g. tert-butyl methyl sulfide was oxidized with quantitative conversion and 91% ee. Low loadings (0.3-5 mol%) of the catalysts were used. No overoxidation to sulfones was observed in this study.     

Phosphino Isoxazolidines: an Approach to Regio and Stereoselective Synthesis

Abstract

The 1,3-dipolar cycloaddition of nitrones to vinyl phosphorus derivatives, mainly phosphines and their oxides and sulfides, has been studied. The cycloaddition to chiral racemic phosphine oxides and sulfides gives adducts with considerable diastereofacial selectivity. The transition state model for the cycloaddition is discussed.     

THE REACTION OF ANHYDROUS HCI/CHLOROFORM WITH DIARYL SULFOXIDES

Abstract

The reaction of variously substituted diaryl sulfoxides with anhydrous HCl in chloroform was examined. The products ranged from the corresponding sulfides to mono- and dichlorinated sulfides and sulfoxides. The same reaction in the presence of phenol afforded primarily the corresponding sulfides accompanied by o- and p-chlorophenol. The latter reaction is an efficient means for deoxygenating diaryl sulfoxides. The mechanism of the reaction and the nature of the chlorinating species are discussed.     

Palladium-catalyzed carbon-sulfur cross-coupling reactions with indium tri(organothiolate) and its application to sequential one-pot processes

It was found that indium tri(organothiolate) is an effective nucleophilic coupling partner in Pd-catalyzed C-S cross-coupling reactions to produce the functionalized sulfides in excellent yields with high atom efficiency and complete regio- and chemoselectivity. The present method was efficiently applied to the sequential one-pot processes composed of selective double C-S cross-coupling reactions and addition of allylindium or allenylindium to aldedyde to give the functionalized sulfides and bis(sulfides).     

Preparation of copper and zinc sulfide nanoparticles and their modification with cysteine

A new method for the preparation of copper and zinc sulfides nanoparticles in homogeneous aqueous solutions using cysteine as a surface modifier was proposed. The size of the particles obtained is 5–7 and 1.5–3 nm for copper and zinc sulfides, respectively, depending on the concentration of the reactants. Associates of the nanoparticles 10–30 nm in size are formed in the system with an increase in the total concentrations of the sulfides. Sols of the nanoparticles obtained in cysteine solutions are resistant to oxidation and coagulation within several weeks. The variation of the synthesis conditions makes it possible to obtain zinc sulfide particles with optical properties related to size effects.