Zirconium-catalyzed asymmetric carboalumination (ZACA reaction) of 1,4-dienes

Variously substituted 1,4-dienes containing a terminal vinyl (H₂CCH) group, readily undergo the ZACA reaction with Me₃Al and higher alkylalanes in a 1:1 molar ratio in the presence of a catalytic amount (1–5 mol %) of bis[(1-neomenthyl)indenyl]zirconium dichloride in good yields and in good enantioselectivity (70–92% ee), thereby providing an efficient and convenient route to various alkene-containing chiral natural products. Only the reaction of the parent 1,4-pentadiene is accompanied by extensive racemization.     

All-catalytic, efficient, and asymmetric synthesis of alpha,omega-diheterofunctional reduced polypropionates via "one-pot" Zr-catalyzed asymmetric carboalumination-Pd-catalyzed cross-coupling tandem process

A highly efficient method for the synthesis of stereochemically pure (>/=99% ee and >50/1 dr) alpha,omega-diheterofunctional reduced polypropionates has been developed. The essential features of the method are represented by the conversion of inexpensive styrene into 2-methyl-4-phenyl-1-pentanol (1) in 50% yield over two steps from styrene via Zr-catalyzed asymmetric carboalumination (ZACA) reaction in the presence of (NMI)2ZrCl2 and Pd-catalyzed vinylation of the in situ generated isoalkylalanes in the presence of Zn(OTf)2 and a catalytic amount of Pd(DPEphos)Cl2. This ZACA-Pd-catalyzed vinylation may be repeated as needed without purification. After the final ZACA reaction, oxidation with O2 provides alpha-hydroxy-omega-phenyl reduced polypropionates, which can be fully or partially purified by chromatography. After acetylation, Ru-catalyzed oxidative cleavage of the Ph ring, and reduction with BH3.THF, the second chromatographic purification provides stereoisomerically pure alpha,omega-diheterofunctional reduced polypropionates (e.g., 9 and 11) that can be further converted to key intermediates 6 and 7 for the synthesis of ionomycin (4) and borrelidin (5), respectively, by known reactions.     

Efficient and selective synthesis of (S,R,R,S,R,S)-4,6,8,10,16,18-hexamethyl-docosane via Zr-catalyzed asymmetric carboalumination of alkenes (ZACA reaction)

(S,R,R,S,R,S)-4,6,8,10,16,18-Hexamethyldocosane (1) was synthesized in 11% yield in 11 steps in the longest linear sequence from > or =98% pure (S)-beta-citronellal and 6 additional steps for the preparation of 11 in 23% yield from propene. Five of the six asymmetric carbon centers were generated catalytically and stereoselectively by the ZACA reaction (5 times), one lipase-catalyzed acetylation, and two chromatographic operations.     

Catalytic, efficient, and syn-selective construction of deoxypolypropionates and other chiral compounds via Zr-catalyzed asymmetric carboalumination of allyl alcohol

An efficient, syn-selective, all catalytic asymmetric protocol for the synthesis of alpha,omega-diheterofunctional deoxypolypropionates via Zr-catalyzed asymmetric carboalumination (ZACA reaction) was developed. The success of the method critically hinges on the one-pot conversion of unprotected allyl alcohol into TBS-protected (R)- or (S)-3-iodo-2-methyl-1-propanol (1) of 91% enantiomeric purity in 82% yield via (i) Zr-catalyzed asymmetric methylalumination, (ii) iodination, and (iii) protection with TBSCl. After zincation of 1, its Pd-catalyzed cross-coupling with various organic halides can give various organic derivatives, including 3 and 4, which can serve as key intermediates for efficient and selective syntheses of deoxypolypropionates, such as doliculide and 2,4,6,8-tetramethyldecanoic acid, and other chiral compounds, such as callystatin A. Selective monocarboalumination of 1,4-pentadiene (5 equiv) gave, after oxidation, the expected product 5, but it was 0% ee. A plausible mechanism for racemization has been proposed and experimentally supported.     

1,4-Pentenyne as a five-carbon synthon for efficient and selective syntheses of natural products containing 2,4-dimethyl-1-penten-1,5-ylidene and related moieties by means of Zr-catalyzed carboalumination of alkynes and alkenes

Two highly efficient protocols for enantioselective synthesis of 2,4-dimethyl-1-penten-1,5-ylidene derivatives involve the combined use of the Zr-catalyzed methylalumination of alkynes (ZMA) and the Zr-catalyzed asymmetric carboalumination of alkenes (ZACA). The ZMA/ZACA protocol has been applied to the synthesis of a nafuredin intermediate 14 and a potential intermediate 18 for milbemycin beta 3, while the ZACA/ZMA protocol has been applied to the synthesis of a (-)-bafilomycin A(1) intermediate 25.     

Direct catalytic asymmetric aldol reaction of hydroxyketones: asymmetric Zn catalysis with a Et(2)Zn/linked-BINOL complex

Full details of our newly developed catalyses with asymmetric zinc complexes as mimics of class II zinc-containing aldolase are described. A Et(2)Zn/(S,S)-linked-BINOL complex was developed and successfully applied to direct catalytic asymmetric aldol reactions of hydroxyketones. A Et(2)Zn/(S,S)-linked-BINOL 1 = 2/1 system was initially developed, which efficiently promoted the direct aldol reaction of 2-hydroxy-2'-methoxyacetophenone (7d). Using 1 mol % of (S,S)-linked-BINOL 1 and 2 mol % of Et(2)Zn, we obtained 1,2-dihydroxyketones syn-selectively in high yield (up to 95%), good diastereomeric ratio (up to 97/3), and excellent enantiomeric excess (up to 99%). Mechanistic investigation of Et(2)Zn/(S,S)-linked-BINOL 1, including X-ray analysis, NMR analysis, cold spray ionization mass spectrometry (CSI-MS) analysis, and kinetic studies, provided new insight into the active oligomeric Zn/(S,S)-linked-BINOL 1/ketone 7d active species. On the basis of mechanistic investigations, a modified second generation Et(2)Zn/(S,S)-linked-BINOL 1 = 4/1 with molecular sieves 3A (MS 3A) system was developed as a much more effective catalyst system for the direct aldol reaction. As little as 0.1 mol % of (S,S)-linked-BINOL 1 and 0.4 mol % of Et(2)Zn promoted the direct aldol reaction smoothly, using only 1.1 equiv of 7d as a donor (substrate/ligand = 1000). This is the most efficient, in terms of catalyst loading, asymmetric catalyst for the direct catalytic asymmetric aldol reaction. Moreover, the Et(2)Zn/(S,S)-linked-BINOL 1 = 4/1 system was effective in the direct catalytic asymmetric aldol reaction of 2-hydroxy-2'-methoxypropiophenone (12), which afforded a chiral tetrasubstituted carbon center (tert-alcohol) in good yield (up to 97%) and ee (up to 97%), albeit in modest syn-selectivity. Newly developed (S,S)-sulfur-linked-BINOL 2 was also effective in the direct aldol reaction of 12. The Et(2)Zn/(S,S)-sulfur-linked-BINOL 2 = 4/1 system gave aldol adducts anti-selectively in good ee (up to 93%). Transformations of the aldol adducts into synthetically versatile intermediates were also described.     

Rhodium-catalyzed asymmetric 1,4-addition of arylboronic acids to coumarins: asymmetric synthesis of (R)-tolterodine

[reaction: see text]. Rhodium-catalyzed asymmetric 1,4-addition of arylboronic acids to coumarins proceeded with high enantioselectivity in the presence of a rhodium catalyst (3 mol %) generated from Rh(acac)(C2H4)2 and (R)-Segphos to give the corresponding (R)-4-arylchroman-2-ones in over 99% ee. This asymmetric reaction was applied to the synthesis of (R)-tolterodine.     

Sparteine-mediated asymmetric nucleophilic substitution at prochiral, sp(3)-hybridized carbon

[reaction: see text] ++-Phenyl-1,3-dioxolanes (1) react with organolithium reagents (2), associated with (-)-sparteine, in the presence of BF(3).OEt(2) to afford chiral monosubstitution products 3. Enantioselectivity is highest if both 1 and 2 carry alkyl substituents in the ortho position. However, the enantioselectivity decreases in the case of very bulky substituents such as tert-butyl or phenyl.     

Cu(I)-catalyzed asymmetric oxidative cross-coupling of 2-naphthol derivatives

The asymmetric oxidative coupling reaction between 2-naphthol or binaphthol derivatives and 3-hydroxy-2-naphthoate derivatives with the copper(I)-(S)-(−)-isopropylidenebis(4-phenyl-2-oxazoline) catalyst was carried out. The reaction proceeded in a highly cross-coupling selective manner (≤99.7%) to produce the binaphthyl or quaternaphthyl derivative in good yield (≤92%) with enantioselectivity of up to 74%.     

Pd(II)-catalyzed asymmetric addition of malonates to dihydroisoquinolines

We have developed a highly efficient reaction for catalytic asymmetric addition of malonates to dihydroisoquinolines using chiral Pd(II) complexes. In the reactions, substrates with various substitution patterns were available, and the reactions were complete within several hours (<3 h in most cases) under mild reaction conditions, affording various optically active C1-substituted tetrahydroisoquinoline derivatives (up to 98% yield, up to 97% ee). Furthermore, slow addition of DDQ allowed the in situ generation of the reactive intermediate from the corresponding N-Boc-protected amine, and dehydrogenative addition reaction was successfully demonstrated.     

Highly efficient asymmetric epoxidation of alkenes with a D(4)-symmetric chiral dichlororuthenium(IV) porphyrin catalyst.

A dichlororuthenium(IV) complex of 5,10,15,20-tetrakis[(1S,4R,5R,8S)-1,2,3,4,5,6,7,8-octahydro-1,2:5,8-dimethanoanthrance-9-yl]porphyrin, [Ru(IV)(D(4)-Por)Cl(2)] (1), was prepared by heating [Ru(II)(D(4)-Por)(CO)(MeOH)] (2) in refluxing CCl(4). Complex 1 is characterized by (1)H NMR (paramagnetically shifted pyrrolic protons at delta(H) = -52.3 ppm), FAB-mass spectroscopies, and magnetic susceptibility measurement (mu(eff) = 3.1 mu(B)). The ruthenium complex exhibits remarkable catalytic activity toward enantioselective alkene epoxidation using 2,6-dichloropyridine N-oxide (Cl(2)pyNO) as terminal oxidant. The Ru(IV)-catalyzed styrene epoxidation is achieved within 2 h (versus 48 h for the 2-catalyzed reaction), and optically active styrene oxide was obtained in 69% ee and 84% yield (875 turnovers). Likewise, substituted styrenes and some conjugated cis-disubstituted alkenes (e.g., cis-beta-methylstyrene, cis-1-phenyl-3-penten-1-yne, 1,2-dihydronaphthalene, and 2,2-dimethylchromenes) are converted effectively to their organic epoxides in 50-80% ee under the Ru(IV)-catalyzed conditions, and more than 850 turnovers of epoxides have been attained. When subjecting 1 to four repetitive uses by recharging the reaction mixture with Cl(2)pyNO and styrene, styrene oxide was obtained in a total of 2190 turnovers and 69% ee. UV-vis and ESI-mass spectral analysis of the final reaction mixture revealed that a ruthenium-carbonyl species could have been formed during the catalytic reaction, leading to the apparent catalyst deactivation. We prepared a heterogeneous chiral ruthenium porphyrin catalyst by immobilizing 1 into sol-gel matrix. The heterogeneous catalyst is highly active toward asymmetric styrene epoxidation producing styrene oxide in 69% ee with up to 10,800 turnovers being achieved. The loss of activity of the Ru/sol-gel catalyst is ascribed to catalyst leaching and/or deactivation. On the basis of Hammett correlation (rho(+) = -1.62, R = 0.99) and product analysis, a dioxoruthenium(VI) porphyrin intermediate is not favored.     

Role of NaBH(4) stabilizer in the oxazaborolidine-catalyzed asymmetric reduction of ketones with BH(3-)THF

When stabilized BH(3-)THF (BTHF) was added to a mixture of ketone and tetrahydro-1-methyl-3,3-diphenyl-1H,3H-pyrrolo[1,2-c][1,3,2]oxazaborole (MeCBS-ozaxaborolidine, MeCBS) catalyst 1, low enantioselectivities resulted. Several relative rate experiments showed that a borohydride species in BTHF catalyzed the nonselective borane reduction of ketones, effectively competing with enantioselective MeCBS reduction of ketones, lowering the overall selectivity of the reaction. Improved enantioselectivities in the reaction are obtained by reversing the mode of addition (ketone to BTHF and catalyst), lowering the concentration of NaBH(4) stabilizer in the BTHF solution (87-95% ee) and increasing the concentration or addition rate of BTHF. Decreased reaction temperature and increased catalyst loading only slightly improved the selectivity of the reaction. Upon reaction parameter optimization, simultaneous addition of substrate and BTHF to MeCBS catalyst stabilizer resulted in the highest overall enantioselectivities (96% ee) and diminished the effect of the borohydride. Alternatively, the addition of Lewis acids such as BF(3-)THF to the reaction mixture effectively destroyed the NaBH(4) stabilizer in BTHF solutions, restoring the enantioselectivity to acceptable levels.     

Hemilabile amidomonophosphine ligand-rhodium(I) complex-catalyzed asymmetric 1,4-addition of arylboronic acids to cycloalkenones

The asymmetric 1,4-addition reaction of arylboronic acids with cycloalkenones was catalyzed by 1 mol % of an amidomonophosphine-rhodium(I) catalyst in a 10:1 mixture of 1,4-dioxane and water at 100 degrees C, affording 3-arylcycloalkanones in reasonably high enantioselectivity and high yields. It was revealed by NMR, IR, and X-ray spectroscopies that this bidentate amidomonophosphine behaves as a hemilabile ligand that contains a hard donor site in addition to the soft donor in a molecule. Phosphorus atom strongly bonds to rhodium(I), and the amide carbonyl oxygen is coordinatively labile. The reaction efficacy of phenylboronic acid with cyclopent-2-en-1-one was significantly dependent on the possibility of coordination of the amide carbonyl oxygen to rhodium(I).     

Spectroscopic investigations of bis(sulfoximine) copper(II) complexes and their relevance in asymmetric catalysis

The structure of Cu(II) complex 3 formed within the course of a stereoselective Diels-Alder reaction was investigated by EXAFS, CW-EPR at X- and W-band, HYSCORE, pulsed ENDOR, and UV-vis spectroscopy. The experimental techniques indicate that the chiral bis(sulfoximine) ligand (S,S)-1 and the dienophile form a tetragonally distorted complex in CH(2)Cl(2). The ligand binds to the Cu(II) center via the imine nitrogens, whereas the dienophile interacts via the carbonyl oxygen atoms. The additional sites of the first coordination sphere are occupied by counterions and, presumably, solvent molecules. At the axial position, a triflate anion binds via an oxygen atom.     

Trans ruthenium(II) complexes with NH-bridged tetradentate symmetric and asymmetric polypyridyl ligands

NH-Bridged tetradentate ligands were synthesized to achieve stable trans Ru(II) bis(polypyridyl) complexes. The polypyridyl part of the ligand was either symmetric, as in N,N-bis(1,10-phenanthroline-2-yl)amine (phen-NH-phen), or asymmetric, as in N-(1,10-phenanthroline-2-yl)-N-(6-yl-dipyridyl[2,3-a:2',3'-c]phenazine)amine (dppz-NH-phen). Protonation of phen-NH-phen with trifluoroacetic acid and the subsequent reaction with RuCl3 yield trans-[Ru(phen-NH-phen)Cl2]. The chloro ligands in this compound can easily be replaced by stronger ligands, such as CH3CN and DMSO. In this way, complexes trans-[Ru(phen-NH-phen)(CH3CN)(DMSO)](PF6)2 (1), trans-[Ru(phen-NH-phen)(DMSO)2](PF6)2 (2), and trans-[Ru(phen-NH-phen)(CH3CN)2](PF6)2 (3) were obtained. X-ray structures were determined for 1 and 3. Following a procedure similar to that used with phen-NH-phen, the complex trans-[Ru(dppz-NH-phen)(CH3CN)2](PF6)2 (4) was obtained. To our knowledge, this is the first reported trans ruthenium(II) bis(polypyridyl) complex with two different polypyridyl ligands in the equatorial plane.     

Theoretical studies on the mechanism and stereoselectivity of Rh(Phebox)-catalyzed asymmetric reductive aldol reaction

Density functional theory calculations (B3LYP) have been carried out to understand the mechanism and stereochemistry of an asymmetric reductive aldol reaction of benzaldehyde and tert-butyl acrylate with hydrosilanes catalyzed by Rh(Phebox-ip)(OAc)(2)(OH(2)). According to the calculations, the reaction proceeds via five steps: (1) oxidative addition of hydrosilane, (2) hydride migration to carbon-carbon double bond of tert-butyl acrylate, which determines the chirality at C2, (3) tautomerization from rhodium bound C-enolate to rhodium bound O-enolate, (4) intramolecular aldol reaction, which determines the chirality at C3 and consequently the anti/syn-selectivity, and (5) reductive elimination to release aldol product. The hydride migration is the rate-determining step with a calculated activation energy of 23.3 kcal mol(-1). In good agreement with experimental results, the formation of anti-aldolates is found to be the most favorable pathway. The observed Si-facial selectivity in both hydride migration and aldol reaction are well-rationalized by analyzing crucial transition structures. The Re-facial attack transition state is disfavored because of steric hindrance between the isopropyl group of the catalyst and the tert-butyl acrylate.     

Catalytic asymmetric cyano-ethoxycarbonylation reaction of aldehydes using a YLi3 tris(binaphthoxide) (YLB) complex: mechanism and roles of achiral additives

Full details of a catalytic asymmetric cyano-ethoxycarbonylation reaction promoted by a heterobimetallic YLi3 tris(binaphthoxide) complex (YLB 1), especially mechanistic studies, are described. In the cyanation reaction of aldehydes with ethyl cyanoformate, three achiral additives, H2O, tris(2,6-dimethoxyphenyl)phosphine oxide (3a), and BuLi, were required to achieve high reactivity and enantioselectivity (up to >99% yield and up to 98% ee). The roles of achiral additives and the reaction pathway were investigated in detail. In situ IR analysis revealed that the initiation step to generate LiCN from H2O, BuLi, and ethyl cyanoformate is rather slow. On the basis of mechanistic studies of the initiation step to generate an active nucleophilic species, reaction conditions were optimized by using a catalytic amount of acetone cyanohydrin as an initiator. Under the optimized conditions, the induction period decreased and the reaction completed within 9 min using 5 mol % YLB at -78 degrees C. Catalyst loading was successfully reduced to 1 mol %. Kinetic experiments and evaluation of the substituent effects of phosphine oxide revealed that phosphine oxide had beneficial effects on both the reaction rate and the enantioselectivity. The putative active species as well as the catalytic cycle of the reaction are also discussed.     

Preparation of a chiral synthon for an HBV inhibitor: enzymatic asymmetric hydrolysis of (1α,2β,3α)-2-(benzyloxymethyl)cyclopent-4-ene-1,3-diol diacetate and enzymatic asymmetric acetylation of (1α,2β,3α)-2-(benzyloxymethyl)cyclopent-4-ene-1,3-diol

Enantioselective asymmetric hydrolysis of (1α,2β,3α)-2-(benzyloxymethyl)-cyclopent-4-ene-1,3-diol diacetate 1 to the corresponding (+)-monoacetate 2 was carried out using lipase PS-30 from Pseudomonas cepacia or pancreatin. A reaction yield of 85 M % with an enantiomeric excess (ee) of 98% was obtained. Using pancreatin, a reaction yield of 75 M % with an ee of 98.5% was obtained. Asymmetric acetylation of (1α,2β,3α)-2-(benzyloxymethyl)-cyclopent-4-ene-1,3-diol 3 to the corresponding (−)-monoacetate 4 was carried out using lipase PS-30 with isopropenyl acetate as the acylating agent. A reaction yield of 80 M % with an ee of 98% was obtained for (−)-monoacetate 4.     

Influence of the built-in pyridinium salt on asymmetric epoxidation of substituted chromenes catalysed by chiral (pyrrolidine salen)Mn(III) complexes

Chiral (pyrrolidine salen)Mn(III) complexes 1 with an N-benzoyl group and 2 with an N-isonicotinoyl group as well as the corresponding N-methyl (3) and N-benzyl (4) pyridinium salts of 2 were synthesized. The catalytic properties of 1–4 and 2 with excess CH₃I were explored to figure out the influence of the internal pyridinium salt in the catalyst on asymmetric epoxidation of substituted chromenes with NaClO/PPNO as an oxidant system in the aqueous/organic biphasic medium. The (pyrrolidine salen)Mn(III) complexes with an internal pyridinium salt, either formed in situ or isolated, displayed higher activities than analogous complexes 1, 2 and Jacobsen's catalyst in the aforementioned reaction, with comparable high yields and ee values. The acceleration of the reaction rate is attributed to the phase transfer capability of the built-in pyridinium salt of the (salen)Mn(III) catalyst. The effect of the internal pyridinium salt on the epoxidation of substituted chromenes is similar to that of the external pyridinium salts and ammonium halides.     

Catalytic asymmetric generation of (Z)-disubstituted allylic alcohols

A one-pot method for the direct preparation of enantioenriched (Z)-disubstituted allylic alcohols is introduced. Hydroboration of 1-halo-1-alkynes with dicyclohexylborane, reaction with t-BuLi, and transmetalation with dialkylzinc reagents generate (Z)-disubstituted vinylzinc intermediates. In situ reaction of these reagents with aldehydes in the presence of a catalyst derived from (-)-MIB generates (Z)-disubstituted allylic alcohols. It was found that the resulting allylic alcohols were racemic, most likely due to a rapid addition reaction promoted by LiX (X = Br and Cl). To suppress the LiX-promoted reaction, a series of inhibitors were screened. It was found that 20-30 mol % tetraethylethylenediamine inhibited LiCl without inhibiting the chiral zinc-based Lewis acid. In this fashion, (Z)-disubstituted allylic alcohols were obtained with up to 98% ee. The asymmetric (Z)-vinylation could be coupled with tandem diastereoselective epoxidation reactions to provide epoxy alcohols and allylic epoxy alcohols with up to three contiguous stereogenic centers, enabling the rapid construction of complex building blocks with high levels of enantio- and diastereoselectivity.