Biomimetical catalysis of α-Amino acid hydrolysis over chiral palladacycles

A 4.5-fold difference in catalytic hydrolysis rate constants between stereomer pairs was achieved as a result of the incorporation of bulky substituents into chiral cyclopalladated arylamines used as catalysts for hydrolysis of esters of optically active amino acids. An unexpected inversion of catalyst stereoselectivity depending on the bulkiness of substituents at the palladacycle a-carbon atom was discovered.     

Titanium–salan‐catalyzed asymmetric sulfoxidations with H2O2: design of more versatile catalysts

Titanium–salan complexes with 3,3’‐diphenyl substituents in the salicylidene rings of the salan ligand are efficient sulfoxidation catalysts, capable of catalyzing the asymmetric oxidation of bulky aryl benzyl sulfides with H₂O₂ with good to high enantioselectivities. In this paper, substituent effects on titanium‐salan‐catalyzed enantioselective oxidation of sulfides to sulfoxides have been systematically investigated. Titanium–salan catalysts with halogen substituents at the 5,5’‐positions (3,3’‐H₂dihydrogen substituted) have been found to catalyze the oxidation of both bulky aryl benzyl sulfides and small alkyl phenyl sulfides with good to high enantioselectivities. Kinetic data witness a direct attack of the sulfide to the electrophilic active oxygen species; a consistent reaction mechanism is proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Discovery and optimization of new chromium catalysts for ethylene oligomerization and polymerization aided by high-throughput screening

High throughput screening (HTS) of a 205 member Schiff base salicylaldimine ligand library derived from salicylaldehydes bearing bulky ortho-substituents, i.e., 9-anthracenyl, 1,4,5,8-tetramethylanthracenyl or triptycenyl, reacted in-situ with (p-tolyl)CrCl2(thf)3, identified two new classes of highly active chromium based systems for the oligomerization and polymerization of ethylene, respectively. The polymerization system comprises bidentate ortho-substituted anthracenyl Schiff bases bearing small primary or secondary alkyl imine substituents. The oligomerization catalysts are based upon tridentate ortho-triptycenyl-substituted Schiff bases with pyridylmethyl or quinolyl substituents. Validation tests confirmed polymerization productivities of up to 3000 g x mmol(-1)h(-1)bar(-1) for the polymerization catalyst systems while the oligomerization catalysts gave productivities up to 10 000 g x mmol(-1)h(-1)bar(-1). Key catalyst precursors have been characterized by X-ray crystallography.     

A Theoretical and Experimental Study of the Effects of Silyl Substituents in Enantioselective Reactions Catalyzed by Diphenylprolinol Silyl Ether

The effect of silyl substituents in diphenylprolinol silyl ether catalysts was investigated. Mechanistically, reactions catalyzed by diphenylprolinol silyl ether can be categorized into three types: two that involve an iminium ion intermediate, such as for the Michael‐type reaction (type A) and the cycloaddition reaction (type B), and one that proceeds via an enamine intermediate (type C). In the Michael‐type reaction via iminium ions (type A), excellent enantioselectivity is realized when the catalyst with a bulky silyl moiety is employed, in which efficient shielding of a diastereotopic face of the iminium ion is directed by the bulky silyl moiety. In the cycloaddition reaction of iminium ions (type B) and reactions via enamines (type C), excellent enantioselectivity is obtained even when the silyl group is less bulky and, in this case, too much bulk reduces the reaction rate. In other cases, the yield increases when diphenylprolinol silyl ethers with bulky substituents are employed, presumably by suppressing side reactions between the nucleophilic catalyst and the reagent. The conformational behaviors of the iminium and enamine species have been determined by theoretical calculations. These data explain the effect of the bulkiness of the silyl substituent on the enantioselectivity and reactivity of the catalysts.     

Polymerization of 4‐methylpentene and vinylcyclohexane by amine bis(phenolate) titanium and zirconium complexes

The polymerization of the substituted olefins 4‐methylpentene and vinylcyclohexane by dibenzyl titanium and zirconium complexes of three amine bis(phenolate) ligands is reported. The ligands featured a dimethylamino side‐arm donor and either electron‐withdrawing (Cl and Br) or methyl phenolate substituents. After activation with B(C₆F₅)₃, the zirconium catalysts exhibited a higher activity than the titanium catalysts toward these bulky olefins. Very high weight‐average molecular weight poly(4‐methylpentene) was obtained with the zirconium catalysts. The zirconium catalysts were employed in 1‐hexene polymerization, and their activity was found to be the highest ever reported for catalysts of the amine bis(phenolate) family. The catalysts featuring methyl phenolate substituents showed a higher activity toward these substituted olefins than the electron‐poor catalysts; this trend was opposite to their activity toward 1‐hexene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1136–1146, 2006     

Latent sulfur chelated ruthenium catalysts: Steric acceleration effects on olefin metathesis

A series of sulfur chelated dormant ruthenium olefin metathesis catalysts is presented. The catalysts prepared were shown to possess the uncommon cis-dichloro arrangement and were mostly inactive at room temperature. By systematically modifying the size of the substituent groups at the chelating sulfur atom, catalyst activity at different temperatures was significantly affected; more bulky substituents fomented activity at lower temperatures. The catalysts were also shown to be stable in solution and retained their catalytic activity even after being exposed to air for two weeks.     

Quantum chemical modeling of chiral catalysis. Part 8. On the conformational freedom of the ketone of ketone-borane complexes of oxazaborolidines used as catalysts in the enantioselective reduction of ketones

Standard ab initio molecular orbital methods were employed to study conformational freedom of the ketone of ketone-borane complexes of chiral oxazaborolidines used as catalysts for the enantioselective reduction of ketones (CBS reduction). A formaldehyde-borane complex of 1,3,2-oxazaborolidine was used as a model system. A new conformation was found which was energetically more advantageous than the original one predicted by Corey et al. The new conformation was predicted to be destabilized by bulky substituents at the C-5 of the ring. A new class of potential oxazaborolidine catalysts for the enantioselective reduction of ketones was invented.     

A guide to Sonogashira cross-coupling reactions: the influence of substituents in aryl bromides, acetylenes, and phosphines

The conversion-time data for 168 different Pd/Cu-catalyzed Sonogashira cross-coupling reactions of five arylacetylenes (phenylacetylene; 1-ethynyl-2-ethylbenzene; 1-ethynyl-2,4,6-R(3)-benzene (R = Me, Et, i-Pr)) and Me(3)SiCCH with seven aryl bromides (three 2-R-bromobenzenes (R = Me, Et, i-Pr); 2,6-Me(2)-bromobenzene and three 2,4,6-R(3)-bromobenzenes (R = Me, Et, i-Pr)) with four different phosphines (P-t-Bu(3), t-Bu(2)PCy, t-BuPCy(2), PCy(3)) were determined using quantitative gas chromatography. The stereoelectronic properties of the substituents in the aryl bromides, acetylenes, and phosphines were correlated with the performance in Sonogashira reactions. It was found that the nature of the most active Pd/PR(3) complex for a Sonogashira transformation is primarily determined by the steric bulk of the acetylene; ideal catalysts are: Pd/P-t-Bu(3) or Pd/t-Bu(2)PCy for sterically undemanding phenylacetylene, Pd/t-BuPCy(2) for 2- and 2,6-substituted arylacetylenes or Me(3)SiCCH and Pd/PCy(3) for extremely bulky acetylenes and aryl bromides. Electron-rich and sterically demanding aryl bromides with substituents in the 2- or the 2,6-position require larger amounts of catalyst than 4-substituted aryl bromides. The synthesis of tolanes with bulky groups at one of the two aryl rings is best done by placing the steric bulk at the arylacetylene, which is also the best place for electron-withdrawing substituents.     

Synthesis and activity of ruthenium olefin metathesis catalysts coordinated with thiazol-2-ylidene ligands

A new family of ruthenium-based olefin metathesis catalysts bearing a series of thiazole-2-ylidene ligands has been prepared. These complexes are readily accessible in one step from commercially available (PCy3)2Cl2Ru=CHPh or (PCy3)Cl2Ru=CH(o-iPrO-Ph) and have been fully characterized. The X-ray crystal structures of four of these complexes are disclosed. In the solid state, the aryl substituents of the thiazole-2-ylidene ligands are located above the empty coordination site of the ruthenium center. Despite the decreased steric bulk of their ligands, all of the complexes reported herein efficiently promote benchmark olefin metathesis reactions such as the ring-closing of diethyldiallyl and diethylallylmethallyl malonate and the ring-opening metathesis polymerization of 1,5-cyclooctadiene and norbornene, as well as the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene and the macrocyclic ring-closing of a 14-membered lactone. The phosphine-free catalysts of this family are more stable than their phosphine-containing counterparts, exhibiting pseudo-first-order kinetics in the ring-closing of diethyldiallyl malonate. Upon removing the steric bulk from the ortho positions of the N-aryl group of the thiazole-2-ylidene ligands, the phosphine-free catalysts lose stability, but when the substituents become too bulky the resulting catalysts show prolonged induction periods. Among five thiazole-2-ylidene ligands examined, 3-(2,4,6-trimethylphenyl)- and 3-(2,6-diethylphenyl)-4,5-dimethylthiazol-2-ylidene afforded the most efficient and stable catalysts. In the cross metathesis reaction of allyl benzene with cis-1,4-diacetoxy-2-butene increasing the steric bulk at the ortho positions of the N-aryl substituents results in catalysts that are more Z-selective.     

A new 1,1'-binaphthyl-based catalyst for the enantioselective phenylacetylene addition to aromatic aldehydes without using a titanium complex

[reaction: see text] A novel 1,1'-binaphthyl compound containing bulky 3,3'-aryl substituents is found to catalyze the reaction of a terminal alkyne with various aromatic aldehydes under mild conditions to generate chiral propargyl alcohols with 80-94% ee. Unlike the previously reported 1,1'-binaphthyl catalysts, this new compound does not require the use of a titanium complex and the pre-preparation of an alkynylzinc. This has greatly simplified the experimental procedure for this reaction.     

Catalyst and substituent effects on the rhodium(II)-catalysed intramolecular Buchner reaction

Intramolecular rhodium(II)-catalysed aromatic addition (Buchner) reactions of a range of α- and β-substituted α-diazoketones are reported. Both steric and electronic effects are evident for the aromatic additions investigated. In general, highly efficient aromatic addition is achieved through use of rhodium carboxylates bearing electronegative ligands, such as rhodium trifluoroacetate, while aromatic addition employing rhodium catalysts with more electron-donating ligands, such as rhodium caprolactam, is less efficient. Excellent levels of diastereoselectivity are possible for this process in the presence of rhodium acetate and rhodium caprolactam, however, a reduction in diastereocontrol is generally associated with use of the more reactive, electronegative catalysts. Interestingly, these catalyst effects can be overcome through the steric effects of the substituents on the α-diazoketone substrates, with the presence of sterically bulky substituents at the 2- or 3-position rendering the aromatic addition essentially catalyst independent in terms of efficiency and diastereocontrol.     

Diamine bis(phenolate) and pendant amine bis(phenolate) ligands: catalytic activity for the room temperature palladium‐catalyzed Suzuki–Miyaura coupling reaction

A series of amine bis(phenolate) ligands bearing aryl substituents of varying steric bulk are reported and characterized using single‐crystal X‐ray diffraction, NMR spectroscopy and high‐resolution mass spectrometry experiments. Palladium complexes derived in situ from these ligands are evaluated as catalysts for the Suzuki–Miyaura coupling of phenylboronic acid and aryl bromides. High conversions are observed for these reactions in methanol solvent at low catalyst loadings (0.01 mol%), short reaction times (30 min) and mild temperatures (30°C). Conversion is observed for a range of substrates, and is found to depend on the nature of the external base and solvent employed. These findings demonstrate the utility of catalysts derived from late transition metal complexes of amine bis(phenolate) ligands, particularly those bearing bulky cumyl substituents. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,geometric structure,and properties of poly(phenylacetylenes) with bulky para-substituents

Phenylacetylenes (PAs) with bulky substituents (adamantyl, tert-butyl, and n-butyl groups) at the para-position polymerized in good yields with Fe, Rh, Mo, and W catalysts. The formed polymers were soluble, and their number-average molecular weights were in the range of thousands to hundred thousands. Whereas it is known that the poly(PA) obtained with the Fe catalyst is an insoluble cis-cisoidal polymer, the present polymers formed with the same catalyst were totally soluble in many solvents such as benzene and CHCl₃. The ¹H- and ¹³C-NMR and DSC data revealed that both of the polymers formed with the Fe and Rh catalysts had virtually all-cis structures, while those with the Mo and W catalysts had cis-rich and trans-rich structures, respectively. Cis-cisoidal and cis-transoidal structures of para-substituted poly(PAs) could not be distinguished because of their good solubility. The bulky substituents raised the temperature of cis–trans isomerization and improved the thermal stability of the polymers. Poly(p-t-BuPA) showed gas permeability higher than that of poly(PA). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3157–3163, 1998     

Dramatic effect of heteroatom backbone substituents on the ethylene polymerization behavior of bis(imino)pyridine iron catalysts

Bis(imino)pyridine iron complexes bearing ether and thioether backbone substituents have been synthesized and evaluated for the polymerization of ethylene. The methoxy derivative is inactive whereas bulky phenoxides or thioether derivatives afford activities as high as the most active systems reported to date.     

Titanium and zirconium complexes of dianionic and trianionic amine-phenolate-type ligands in catalysis of lactide polymerization

The synthesis of alkoxotitanium(IV) and -zirconium(IV) complexes of seven chelating tetradentate di- or trianionic amine-phenolate ligands belonging to three families and their application in L-lactide polymerization are described. The isopropoxotitanium complexes were synthesized by a direct reaction between the ligand precursors and titanium tetraisopropoxide, whereas the zirconium complexes were synthesized by various routes. For titanium, complexes of all seven ligands could be synthesized. For zirconium, the hexacoordinate complexes derived from all dianionic ligands were synthesized; however, the only pentacoordinate complex that could be produced was the one derived from the bulky trianionic ligand. X-ray structures of zirconium complexes of the three families indicated a substantial pi donation from the alkoxo ligand to the metal. All complexes were found to be active lactide polymerization catalysts, and their activity was found to depend strongly on the metal, the coordination number around the metal, and the phenolate substituents but not on the ligand backbone.     

Structure-property relations and processing of rod-like aromatic polyamides

Homopolyamides and copolyamides with structural characteristics such as bulky lateral substituents, non-coplanar, 2, 2′-dimethylbiphenylene units and comonomers of different length were prepared and their structure-property relations investigated. Polyamides with high solubilities and very low or no degree of crystallinity are obtainable by a combination of monomers with bulky lateral substituents and non-coplanar biphenylene units. These polyamides form tough, transparent films with good mechanical and thermal properties. Lyotropic liquid crystalline behavior was found in some cases for polyamides with non-coplanar biphenylene units. The incorporation of monomers with bulky substituents on the terephthalic acid unit lowers the chain stiffness and significantly influences the formation of lyotropic solutions.     

Enantioselective addition of diethylzinc to aldehydes catalyzed by N-(9-phenylfluoren-9-yl) beta-amino alcohols

A set of secondary N-phenylfluorenyl beta-amino alcohols have been prepared and evaluated as catalysts for the enantioselective addition of diethylzinc to benzaldehyde. The influence of the substituents on the stereogenic centers of the ligand has been studied, and enantioselectivities up to 97% have been obtained. Those ligands with bulky groups in the carbinol stereocenter and small groups alpha to the nitrogen atom displayed the best catalytic activity and enantioselectivity. The most enantioselective ligand (4e) was found to possess general applicability for the enantioselective addition of diethylzinc to a variety of aromatic and aliphatic aldehydes.     

Hydrophobic N,N-diarylammonium pyrosulfates as dehydrative condensation catalysts under aqueous conditions

Oil-soluble N,N-diarylammonium pyrosulfates as nonsurfactant-type catalysts for the dehydrative ester condensation under aqueous conditions are described. Preheat treatment of dibasic sulfuric acid with bulky N,N-diarylamines generates water-tolerant salts of pyrosulfuric acid as active catalyst species. The present catalysts in water can also widely be applied to unusual selective esterifications and dehydrative glycosylation.     

A concise synthesis of a new xylyl-biaryl diphosphine ligand for asymmetric hydrogenation of ketones

A concise synthesis of a symmetrical biaryl diphosphine ligand bearing 3,5-dimethylphenyl substituents at phosphorus is described. The ruthenium catalysts [diphosphine RuCl₂ diamine] containing the new ligand Xyl-TetraPHEMP were found to be as active and as selective as the state-of-the-art catalysts for homogeneous asymmetric ketone hydrogenation.     

Intramolecular Diels-Alder reaction of N-allyl 2-furoyl amides: effect of steric strain and amide rotational isomerism

Intramolecular Diels-Alder reactions of various N-allyl 2-furoyl amides with different substituents on the nitrogen atom were investigated. The reaction of amides having bulky substituents proceeded at a faster rate than the analogs whose substituents were of less bulkiness. From the systematic experimental survey of the substituent effects and the energetic evaluation based on the DFT calculations at the B3LYP/6-31G(d) level, the enhanced reactivity was ascribed to the relief of steric strain upon cyclization rather than the amide rotational isomerism governed by the bulky substituents.