手性铝催化剂在不对称合成中的应用

综述了手性铝催化剂在不对称Diels-Alder、Michael加成、1, 3-偶极环加成、Ene反应、磷氢化、氰硅化、烯丙基化、氢化、Claisen重排、Friedel-Crafts烷基化、Aldol等反应中的应用.     

Toluene methylation to para-xylene

To investigate the effect of operational parameter and transport phenomena on para-xylene production from toluene methylation with methanol, a fixed bed tubular reactor packed with Al-HMS-5 mesoporous catalyst was numerically studied. A mechanistic Longmuir–Hinshelwood-type kinetic study has been implemented on a proposed reaction network based on former experimental observation and theoretical background. Kinetic parameters and activation energy related to proposed reaction network for toluene methylation were evaluated using nonlinear regression and Arrhenius plot, respectively. In addition, heat transfer, fluid flow, and chemical reaction equations consisting of toluene methylation and xylene isomerization were solved using finite element method. In order to optimize toluene methylation process, reaction temperature and residence time were investigated. The results showed that uniform distribution of temperature exists at the reactor. There is only deviation from uniform temperature at the reactor entrance, but in other places, the temperature distribution is uniform. As a result, fluid temperature quickly becomes the same as the wall temperature, making the toluene methylation reaction highly efficient. Finally, the residence time of 60 s and wall temperature of 425 K were recommended as optimum working values.

     

Introduction of click chemistry to carotenoids

We describe the synthesis of carotenoid derivatives via the azide–alkyne click reaction and optimize the conditions for these sensitive molecules. After finding the mildest conditions possible for the reaction we were able to use the click reaction for the synthesis of PEG–carotenoid conjugates starting from carotenoid pentynoates and PEG azides.     

酶促尿嘧啶与丙烯酸乙酯Michael加成反应的研究

考察了4种水解酶在尿嘧啶与丙烯酸乙酯Michael加成反应中的催化效率.初步探讨了反应溶剂,反应温度,反应时间,底物配比,酶添加量等反应条件对该加成反应的影响.筛选得到最适反应条件,在该反应条件下,Michael加成反应产率可达61·2%.     

负载型过氧磷钨杂多化合物上正己醇催化氧化成正己酸

由正己醇合成正己酸不仅可以提高附加值,还能生产己酸类香料以及多种医药产品．利用杂多过氧磷钨季铵盐催化剂,以对环境友好的H2O2 为氧化剂催化十八醇氧化成十八酸的研究已有报道［1,2],但合成负载型相转移催化剂并用于本课题的研究还未见报道．由于过氧磷钨十八烷基季铰盐催化剂（POWP）通常只有很小的比表面积,而SiO2不仅有大的比表面积,同时它所具有的表面羟基是杂多化合物的良好载体［2],POWP负载后的催化剂（POWPS）与未负载的POWP相比,将正己醇氧化为正已酸的收率提高了10多个百分点．     

One-Pot Route from Halogenated Amides to Piperidines and Pyrrolidines

Piperidine and pyrrolidine derivatives are important nitrogen heterocyclic structures with a wide range of biological activities. However, reported methods for their construction often face problems of requiring the use of expensive metal catalysts, highly toxic reaction reagents or hazardous reaction conditions. Herein, an efficient route from halogenated amides to piperidines and pyrrolidines was disclosed. In this method, amide activation, reduction of nitrile ions, and intramolecular nucleophilic substitution were integrated in a one-pot reaction. The reaction conditions were mild and no metal catalysts were used. The synthesis of a variety of N-substituted and some C-substituted piperidines and pyrrolidines became convenient, and good yields were obtained.     

Microwave-enhanced rhodium-catalyzed conjugate-addition of aryl boronic acids to unprotected maleimides

Various boronic acids were treated with a rhodium (I) catalyst enabling their 1,4-conjugate addition to unprotected maleimide. The scope of the reaction was explored to include both electron-rich and electron poor boronic acids. These reactions were also performed in the microwave resulting in reduced reaction times and improved efficiencies. Additionally, substrates that were recalcitrant under conventional conditions were successfully reacted under microwave conditions. The reaction worked satisfactorily with boronic acids having a free OH or NH group.     

Metathesis route to bridged metallocenes

A variety of bridged metallocenes of Fe(II), Ru(II), Zr(IV), or Hf(IV) were prepared in good yield by the interannular ring-closing metathesis reaction of 1,1'-diallylmetallocenes using the Ru-carbene catalyst, and the present method was extended to diastereoselective reaction to give dl- or meso-bridged metallocenes with excellent stereoselectivity.     

蜂窝陶瓷整体反应器内苯选择加氢制环己烯

 研究了Ru/ZrO2蜂窝陶瓷整体催化剂对苯液相选择加氢制环己烯反应的催化性能,考察了催化剂载体、活性组分含量、预处理条件、反应温度、反应压力、水和硫酸锌水溶液等对该反应的影响. 结果表明,整体催化剂不经预还原就可以直接进行苯液相加氢反应; 反应物中不加水或其它无机添加剂时环己烯的选择性为0,水或硫酸锌水溶液的加入大大降低了反应活性,但环己烯的选择性显著提高,约达到20%; 反应物中水和苯有最优配比,以保证最佳的环己烯选择性和收率; 反应温度在413～443 K,反应压力为3～4 MPa,硫酸锌浓度为0.1 mol/L时,反应结果较好.     

Novel chemo-enzymatic access to amphiphilic cyclodextrins

A new class of mono-substituted amphiphilic cyclodextrins was synthesized in a one-step lipase catalysed amidification. Microbial and animal lipases were able to catalyse this reaction. Depending on the acyl donors, various hydrophobic moieties have been grafted on methylated β-cyclodextrin. Azoninyl-methylated-β-cyclodextrin derivatives were also obtained by reaction of acetaldehyde and modified cyclodextrins in presence of dedicated lipase.     

异丁烯直接胺化合成叔丁胺反应的热力学研究

叔丁胺是一种重要的有机化工中间体,广泛应用于制备橡胶促进剂,医药,农药,着色剂等诸多下游产物.目前,叔丁胺主要的生产方法,如叔丁脲水解法,异丁烯-氢氰酸法(Ritter法),卤代烃胺化法等存在产品收率较低,涉及强酸/强碱的使用,对设备腐蚀和环境污染严重等问题.异丁烯直接胺化生产叔丁胺,原子利用率100%,是典型的绿色化学反应.20世纪末,BASF公司以β沸石为催化剂,率先实现了异丁烯胺化技术的工业应用.但是,其反应条件苛刻,压力达28 MPa,生产过程能耗大,对设备材质要求高.目前,关于异丁烯直接胺化的文献较少,且相关研究多在远离工业应用的常压条件下进行.同时,对于异丁烯直接胺化反应过程的热力学,特别是缓和反应条件下的热力学尚待进一步系统和深入地研究分析,以期指导低温低压条件下高性能胺化催化剂的研发和工艺条件优化.我们计算了473?573 K间,异丁烯胺化制备叔丁胺反应的ΔrH,ΔrG,Kp等热力学数据.在此基础上,分析了反应温度,压力和氨烯比(摩尔比)对异丁烯平衡转化率(叔丁胺选择性>99%,未予考虑)的影响.结果表明,异丁烯胺化是中等强度的放热反应,升高反应温度会急剧降低异丁烯的平衡转化率,如在5 MPa,氨烯比1的条件下,反应温度从473 K提高到573 K,异丁烯平衡转化率从40.6%降到6.9%.但从动力学角度而言,升温可提高胺化反应速率,因此在特定的反应条件下和催化剂上,必然存在最佳反应温度.提高反应压力和氨烯比有利于提高异丁烯的热力学平衡转化率.开发在低温和相对较低的压力下具有较高胺化活性的催化剂是提高该过程经济性和实用性的关键.在较缓和的反应条件下(523 K,5 MPa,氨烯比4及异丁烯空速0.5 h?1),考察了ZSM-5(R=50和R=412,R为硅铝比,下同),ZSM-11(R=48),MOR(R=10),SAPO-11(摩尔组成,1.6Al2O3:1.0SiO2:1.4P2O5)等不同拓扑结构分子筛以及氧化铝在异丁烯胺化反应中的性能.结果表明,空白试验中,无叔丁胺产物生成.在ZSM-11上的获得最高的异丁烯胺化转化率,为14.2%(达到平衡转化率的52.2%),在ZSM-5(R=50),ZSM-5(R=412)和MOR上,异丁烯转化率分别为13.9%,6.4%和2.9%,叔丁胺选择性均大于99.8%.而SAPO-11和氧化铝未呈现出胺化反应活性.关联氨气程序升温脱附,吡啶吸附红外表征结果及分子筛孔结构特点,表明分子筛胺化活性与其孔径及Br?nsted酸的酸量和酸强度密切相关.为了进一步验证实际反应体系中反应条件对异丁烯胺化反应过程的影响规律,我们在ZSM-11催化剂上,系统考察了反应温度,压力,氨烯比和异丁烯空速对催化剂胺化反应性能的影响及变化规律.结果表明,在其他条件不变的情况下,异丁烯转化率随着温度的升高呈现出先增大后减小的趋势.适当提高原料中氨烯比和反应压力,以及采用较低异丁烯空速有利于促进异丁烯的转化.上述规律与热力学计算结果呈现出较好的一致性.在ZSM-11催化剂上,异丁烯直接胺化反应的较佳反应条件为523 K,5 MPa,氨烯比4,异丁烯空速0.5 h?1.上述结果可为异丁烯直接胺化合成叔丁胺过程新型高效催化剂的研发和反应工艺条件优化提供参考和指导.     

Tethered aminohydroxylation: dramatic improvements to the process

[reaction: see text] Changing the identity of the N leaving group on a hydroxylamine-based reoxidant gives a dramatic improvement to the tethered aminohydroxylation reaction. Using OCOC6F5 as a leaving group means that only 1 mol % of osmium is required and yields as high as 98% can be obtained. Acyclic homoallylic alcohols were substrates considered too unreactive for effective use in the tethered aminohydroxylation reaction; improved reaction conditions mean that they have now become viable substrates for oxidation.     

Base-promoted three-component cascade approach to unsymmetrical bis(indolyl)methanes

Here we report a base-catalyzed reaction of two different indoles with aldehydes under heating to produce unsymmetrical bis(indolyl)methanes (BIMs), in which one of the indole ring must be N-substituted. Mixture of EtOH-H₂O is used as solvent. The reaction did not give symmetrical BIMs of N-substituted indoles or N–H indoles. However, traces of latter were formed in few cases, especially when electron-rich aldehydes were used. Diversely substituted indoles and aldehydes were used for the reaction. The reaction proceeds via 3-indolylalcohol, which we confirmed through isolation. The method also gives good yield on multigram scale reaction.     

硒催化羰基化合成敌草隆

报道了一种简易、绿色的合成敌草隆的新方法。以3,4-二氯硝基苯和二甲胺盐酸盐为起始原料,以CO替代剧毒的光气作羰基化试剂,经硒催化的"一锅煮"的氧化还原羰基化反应来直接合成出目标产物。通过考察反应时间、温度、溶剂和碱的种类、CO压力以及物料比等因素,获得了优化的反应条件。在优化条件下,能以70%的产率得到目标产物,从而为除草剂敌草隆的合成开辟出一条路线简短、操作简单、成本低、原子经济性高、环境友好的新途径。并在文末提出了可能的反应机理。     

Asymmetric halo-Mannich-type reaction provides access to pyrrolidines and beta-proline derivatives

[reaction: see text] A new halo-Mannich-type reaction is reported using cyclopropyl carbonyl-derived enolates and sulfonyl-protected imines. Chiral oxazolidinones auxiliaries were found to be effective for completely controlling the stereochemistry of the products. Variations in the oxazolidinone, protecting group, and imine components show this to be a quite general reaction. The initial iodo-Mannich products were found to be readily cyclized in the presence of triethylamine to afford the resulting protected pyrrolidines, which could be readily deprotected under standard conditions.     

New access to 1-deoxynojirimycin derivatives via azide-alkene cycloaddition

The synthesis of 1-deoxynojirimycin (DNJ) derivatives is described from D-glucono-delta-lactone. The DNJ derivatives were obtained via a sequence that included a stereoselective intramolecular Huisgen reaction, decomposition to an aziridine, and its subsequent reaction with a nucleophile. Minimization of allylic strain in the transition state accounts for the stereoselectivity of the cycloaddition reaction.     

Aerobic oxidation of cumene to cumene hydroperoxide catalyzed by metalloporphyrins

A protocol for the aerobic oxidation of cumene to cumene hydroperoxide (CHP) catalyzed by metalloporphyrins is reported herein. Typically, the reaction was performed in an intermittent mode under an atmospheric pressure of air and below 130°C. Several important reaction parameters, such as the structure and concentration of metalloporphyrin, the air flow rate, and the temperature, were carefully studied. Analysis of the data obtained showed that the reaction was remarkably improved by the addition of metalloporphyrins, in terms of both the yield and formation rate of CHP while high selectivity was maintained. It was discovered that 4 or 5 h was the optimal reaction time when the reaction was catalyzed by monomanganese-porphyrin ((p-Cl)TPPMnCl) (7.20 × 10^?5 mol/l) at 120°C with the air flow rate being 600 ml/min. From the results, we also found that higher concentration of (p-Cl)TPPMnCl, longer reaction time and higher reaction temperature were all detrimental to the production of CHP from cumene. Studies of the reaction kinetics revealed that the activation energy of the reaction (E) is around 38.9 × 10⁴ kJ mol^?1. The low apparent activation energy of the reaction could explain why the rate of cumene oxidation to CHP in the presence of metalloporphyrins was much faster than that of the non-catalyzed oxidation.     

Catalytic enantioselective intermolecular reductive aldol reaction to ketones

We describe the first example of a catalytic enantioselective intermolecular reductive aldol reaction. Three types of reactions were studied: (1) reactions between acetophenone and methyl acrylate; (2) reactions between symmetric ketones and β-substituted α,β-unsaturated esters; and (3) reactions between acetophenone derivatives and an allenic ester. Although only moderate enantioselectivity was obtained in the first reaction type, high to excellent enantioselectivity was realized in the enantio-induction at the α-position in the second reaction type and at the δ-position in the third reaction type. Specifically, the third reaction type afforded the corresponding tertiary alcohols with up to 99% ee. Pre-activation of the nucleophile by silyl enolate formation is not necessary in these one-pot catalytic enantioselective reductive aldol reactions.     

Asymmetric N1 unit transfer to olefins with a chiral nitridomanganese complex: novel stereoselective pathways to aziridines or oxazolines

Chiral nitridomanganese complex 1 was found to be a highly potential N1 unit source for the asymmetric synthesis of aziridines and 2-oxazolines from olefins such as styrene and its derivatives. When sulfonyl chlorides were employed as activators of the complex in the presence of pyridine, pyridine N-oxide, and a silver salt, the reaction of olefins with complex 1 proceeded smoothly to afford the N-sulfonylated aziridines. The aziridination of styrene derivatives with complex 1 using 2-trimethylsilylethanesulfonyl chloride (SESCl) gave the N-SES-aziridines, which were easily converted into chiral N-unsubstituted aziridines. It was found that the reaction was applicable to the asymmetric synthesis of 2-oxazolines from olefins when acyl chlorides were employed as activators. Complex 1 provided an effective asymmetric environment for trans-disubstituted styrenes in the reaction (up to 92% ee). This is the first example of a direct asymmetric synthesis of 2-oxazolines from olefins. Additional experiments, conducted during the course of this investigation, suggest that the isomerization of the N-acylaziridine intermediate is involved in this reaction.     

Efficient access to azaindoles and indoles

[Structure: see text] An expedient, catalytic method for the synthesis of diverse azaindoles and indoles, starting from readily available and inexpensive starting materials, is described. Conditions were developed for effective reductive alkylation of electron-deficient o-chloroarylamines, substrates previously viewed as poor partners in this reaction. The derived N-alkylated o-chloroarylamines were elaborated to N-alkylazaindoles and N-alkylindoles via a novel one-pot process comprising copper-free Sonogashira alkynylation and a base-mediated indolization reaction.