Nitric oxide-releasing ruthenium nanoparticles

Nitric oxide-releasing ruthenium nanoparticles were synthesized by the reaction of alkanethiolate-protected ruthenium nanoparticles with tert-butyl nitrite ((t)BuONO), and their water-soluble derivatives are able to deliver NO to proteins such as reduced myoglobin upon light irradiation in aqueous media.     

Sonochemical synthesis of ruthenium nanoparticles

Ruthenium nanoparticles have been prepared by sonochemical reduction of a ruthenium chloride solution using ultrasound frequencies in the range 20–1056 kHz The reduction was monitored by UV-Vis absorption spectrophotometry. Reduction proceeds sequentially from Ru(III) to Ru(II) to Ru(0) and takes almost 13 h. The Ru particles produced by the ultrasound reduction have diameters between 10 and 20 nm as measured by transmission electron microscope image.     

Synthesis of ultrafine Gd2O3 nanoparticles inside single-wall carbon nanohorns

The large diameter of single-wall carbon nanohorns (SWNHs) allows various molecules to be easily incorporated in hollow nanospaces. In this report, we prove that the nanospaces of SWNHs even work as the chemical reaction field at high temperature; that is, Gd-acetate clusters inside SWNHs were transformed into ultrafine Gd(2)O(3) nanoparticles with their particle size retained even after heat-treatment at 700 degrees C. This indicates that the confinement of the Gd-acetate clusters in a deep potential well of the SWNH nanospaces prevented a migration to form larger particles, giving rise to ultrafine Gd(2)O(3) nanoparticles of 2.3 nm in average diameter, which is much smaller than the case without SWNHs. The Gd(2)O(3) nanoparticles thus obtained were demonstrated to be actually useful to the magnetic resonance imaging. We believe that the presented effectiveness of the inner hollow spaces of SWNHs, therefore, also those of the carbon nanotubes, for high-temperature chemical reactions should be highlighted, and that the thus produced novel nanomaterials are promising to expand the fields of nanoscience.     

On morphologies of gold nanoparticles grown from molecular dynamics simulation

The authors use a newly fitted gold embedded atom method potential to simulate the initial nucleation, coalescence, and kinetic growth process of vapor synthesized gold nanoparticles. Overall the population statistics obtained in this work seemed to mirror closely recent experimental HREM observations by Koga and Sugawara [Surf. Sci. 529, 23 (2003)] of inert gas synthesized nanoparticles, in the types of nanoparticles produced and qualitatively in their observance ratio. Our results strongly indicated that early stage coalescence (sintering) events and lower temperatures are the mainly responsible for the occurrence of the Dh and fcc based morphologies, while "ideal" atom by atom growth conditions produced the Ih morphology almost exclusively. These results provide a possible explanation as to why the Dh to Ih occurrence ratio increases as a function of nanoparticle size as observed by Koga and Sugawara.     

Photochemistry of ruthenium trisbipyridine functionalized on gold nanoparticles

Design of nanohybrid systems possessing several ruthenium trisbipyridine (Ru(bpy)(3)(2+)) chromophores on the surface of gold nanoparticles, by adopting a place exchange reaction, was reported and their photophysical properties were tuned by varying the density of chromophores. The charge shift between the excited and ground-state Ru(bpy)(3)(2+) chromophores was reported for the first time, leading to the formation of Ru(bpy)(3)(+) and Ru(bpy)(3)(3+). Electron-transfer products were not observed on decreasing the concentration of Ru(bpy)(3)(2+) functionalized on Au nanoparticles or in a saturated solution of unbound chromophores. The close proximity of the chromophores on periphery of the gold core may lead to an electron transfer reaction and the products sustained for several nanoseconds before undergoing recombination, probably due to the stabilizing effect of the polar ethylene glycol moieties embedded between the chromophore groups.     

Preparation and characterization of positively charged ruthenium nanoparticles

Positively charged ruthenium nanoparticles were prepared by NaBH(4) reduction at room temperature and at pH values lower than 4.9. The ruthenium nanoparticles were characterized by zeta potential measurement, TEM, XPS, and XRD. Particles with a mean diameter of 1.8 nm and a standard deviation of 0.40 nm could be obtained under the experimental conditions. The surface charge on the particles is believed to originate from hydrated proton adsorption. The positively charged ruthenium nanoparticles could be used as the starting material for further functionalization by PVP, ethylenediamine, and dodecylamine.     

A novel synthesis route for ethylenediamine-protected ruthenium nanoparticles

A novel method has been developed to prepare water-dispersible ethylenediamine (en)-stabilized ruthenium nanoparticles. The procedure involves the reduction of an en-RuCl(3) complex by sodium borohydride. The Ru nanoparticles so prepared are fairly stable in water. TEM imaging shows a mean diameter of about 2.1 nm for the particles and a narrow particle size distribution.     

Metallic osmium and ruthenium nanoparticles for CO oxidation

Supported metallic catalysts were prepared from pyrolysis of the organometallic clusters RuOs₃(CO)₁₃(μ-H)₂, Os₃(CO)₁₀(μ-AuPPh₃)₂, Os₃(CO)₁₂, Ru₃(CO)₁₂ and [Ru(CO)₄]_n, on either silica or titania, and their catalytic performance for CO oxidation has been assessed against a supported catalyst prepared from RuCl₃. Ruthenium catalysts prepared from organometallic precursors were found to exhibit better activity, and that supported on TiO₂ exhibited activity at the lowest operating temperature.     

New method for facile synthesis of amphiphilic thiol-stabilized ruthenium nanoparticles and their redox-active ruthenium nanocomposite

The one-phase reduction of RuCl3 with lithium triethylborohydride as a reductant in tetrahydrofuran in the presence of 1-octanethiol, 1-octadecanethiol, 1,1'-binaphthalene-2,2'-dithiol, or oligoethyleneoxythiol gave organic solvent- and water-soluble thiol-stabilized ruthenium nanoparticles. The oligoethyleneoxythiol-stabilized ruthenium nanoparticles were soluble in both water and organic solvents. The ruthenium nanoparticles were stable in the solid state and did not aggregate in solution. Transmission electron microscope images of the ruthenium nanoparticles reveal small dispersed particles with a narrow size distribution. The ligand-exchange reaction of octadecanethiol-stabilized ruthenium nanoparticles (2.0 nm) with phenothiazine-linked decanethiol afforded redox-active phenothiazine-functionalized ruthenium nanoparticles (1.9 nm) that showed a reversible redox peak at +0.51 V (vs Ag/0.1 M AgNO3) in the cyclic voltammogram.     

Carbon dioxide reduction by mononuclear ruthenium polypyridyl complexes

New mononuclear ruthenium complexes with general formula [Ru(bid)(B)(Cl)] (bid is (1Z,3Z)-1,3-bis(pyridin-2-ylmethylene)isoindolin-2-ide; B = bidentate ligand 2,2'-bipyridine or R(2)-bpy, where R = COOEt or OMe) were synthesized and tested as precatalysts for the hydrogenative reduction of CO(2) in 2,2,2-trifluoroethanol (TFE) as solvent with added NEt(3). Significant amounts of formic acid were produced by these catalysts and a kinetic analysis based on initial rate constants was carried out. The potential mechanisms including intermediate species for these catalytic systems were investigated by means of quantum chemical calculations to gain deeper insight into the processes. The effect of electron-donating and electron-withdrawing groups on catalyst performance was studied both experimentally and theoretically.     

Carbon microspheres with supported silver nanoparticles prepared from pollen grains

In this paper, we present a new method to fabricate carbon microspheres with supported silver nanoparticles on the surfaces. In this method, pollen grains were first treated with AgNO(3) aqueous solution, then preoxidized in air at 300 degrees C and carbonized in nitrogen at 600 degrees C, resulting in the silver/carbon nanocomposites. The silver/carbon nanocomposites were characterized by means of SEM, TEM, TG, and XRD. The size and distribution of the silver nanoparticles on the carbon microsphere surface could be controlled by tuning the AgNO(3) treatment conditions.     

Functionalisation of carbon nanohorns

The functionalisation of single wall carbon nanohorns via 1,3-dipolar cycloaddition has been achieved, and the products have been characterised by spectroscopy, microscopy and thermogravimetry.     

Carbon nanotubes decorated with terpyridine‐ruthenium complexes

Surface functionalization of CNTs (SWCNTs or MWCNTs) with dendronized alkoxy terpyridine‐Ru(II)‐terpyridine complexes has been accomplished using either the “grafting to” or the “grafting from” approaches. Different sets of easily processable hybrid metallo‐CNTs composites have been efficiently synthesized bearing either monomeric or polymeric side chain tpy‐Ru(II)‐tpy dicomplexes. Their characterization through TGA, UV‐Vis, and Raman techniques revealed various modification degrees depending on the methodology employed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2551–2559, 2009     

Selectivity shifts in hydrogenation of cinnamaldehyde on electron-deficient ruthenium nanoparticles

Ruthenium fulleride nanospheres were produced and decorated with small (<1.5 nm) ruthenium nanoparticles. These materials, which present a significant charge transfer from ruthenium to the electron acceptor C₆₀ fullerene, were tested in the hydrogenation of cinnamaldehyde. In alcoholic solvents, very large amounts (≈90%) of acetals were formed, pointing out the high acidity of the Ru sites. The addition of a weak base and the use of methanol as a solvent allow to reach high activity and selectivity toward cinnamyl alcohol, whereas the use of an aprotic and apolar solvent decreases the activity and yields mainly hydrocinnamaldehyde. Density functional theory calculations show that this selectivity shift is not correlated to a specific precoordination of cinnamaldehyde on the ruthenium nanoparticles.     

Alkyne-functionalized ruthenium nanoparticles: ruthenium-vinylidene bonds at the metal-ligand interface

Stable ruthenium nanoparticles were prepared by the self-assembly of 1-dodecyne onto the "bare" Ru colloid surface. The formation of a Ru-vinylidene (Ru═C═CH-R) interfacial bonding linkage was confirmed by the specific reactivity of the nanoparticles with imine derivatives to form a heterocyclic complex at the metal-ligand interface, as manifested in (1)H and (13)C NMR, photoluminescence, and electrochemical measurements in which a ferrocenyl imine was used as the labeling probe. Notably, the resulting nanoparticles could also undergo olefin metathesis reactions with vinyl-terminated molecules, as exemplified by the functionalization of the nanoparticles with 1-vinylpyrene. In sharp contrast, no reactvity was observed with 1-dodecynide-stabilized ruthenium nanoparticles with either imine or vinyl derivatives, indicating that these (deprotonated) nanoparticles were stabilized instead by the formation of a Ru-C≡ dπ bond at the metal-ligand interface.     

Ligand-stabilized ruthenium nanoparticles: synthesis, organization, and dynamics

The decomposition of the ruthenium precursor Ru(COD)(COT) (1, COD = 1,5-cyclooctadiene; COT = 1,3,5-cyclooctatriene) in mild conditions (room temperature, 1--3 bar H(2)) in THF leads, in the presence of a stabilizer (polymer or ligand), to nanoparticles of various sizes and shapes. In THF and in the presence of a polymer matrix (Ru/polymer = 5%), crystalline hcp particles of uniform mean size (1.1 nm) homogeneously dispersed in the polymer matrix and agglomerated hcp particles (1.7 nm) were respectively obtained in poly(vinylpyrrolidone) and cellulose acetate. The same reaction, carried out using various concentrations relative to ruthenium of alkylamines or alkylthiols as stabilizers (L = C(8)H(17)NH(2), C(12)H(25)NH(2), C(16)H(33)NH(2), C(8)H(17)SH, C(12)H(25)SH, or C(16)H(33)SH), leads to agglomerated particles (L = thiol) or particles dispersed in the solution (L = amine), both displaying a mean size near 2--3 nm and an hcp structure. In the case of amine ligands, the particles are generally elongated and display a tendency to form worm- or rodlike structures at high amine concentration. This phenomenon is attributed to a rapid amine ligand exchange at the surface of the particle as observed by (13)C NMR. In contrast, the particles stabilized by C(8)H(17)SH are not fluxional, but a catalytic transformation of thiols into disulfides has been observed which involves oxidative addition of thiols on the ruthenium surface. All colloids were characterized by microanalysis, infrared spectroscopy after CO adsorption, high-resolution electron microscopy, and wide-angle X-ray scattering.     

Probing the active sites for CO dissociation on ruthenium nanoparticles

The active sites for CO dissociation were probed on mass-selected Ru nanoparticles on a HOPG support by temperature programmed desorption spectroscopy using isotopically labelled CO. Combined with transmission electron microscopy we gain insight on how the size and morphology of the nanoparticles affect the CO dissociation activity. The Ru nanoparticles were synthesized in a UHV chamber by gas-aggregation magnetron sputtering in the size range from 3 to 15 nm and the morphology was investigated in situ by scanning tunneling microscopy and ex situ by high resolution transmission electron microscopy. Surprisingly, it was found that larger particles were more active per surface area for CO dissociation. It is suggested that this is due to larger particles exposing a more rough surface than the smaller particles, giving rise to a higher relative amount of under-coordinated adsorption sites on the larger particles. The induced surface roughness is proposed to be a consequence of the growth processes in the gas-aggregation chamber.     

Gold nanoparticles grown on star-shaped block copolymer monolayers

We report on the growth of gold nanoparticles in polystyrene/poly(2-vinyl pyridine) (PS/P2VP) star-shaped block copolymer monolayers. These amphiphilic PS(n)P2VP(n) heteroarm star copolymers differ in molecular weight (149,000 and 529,000 Da) and the number of arms (9 and 28). Langmuir-Blodgett (LB) deposition was utilized to control the spatial arrangement of P2VP arms and their ability to reduce gold nanoparticles. The PS(n)P2VP(n) monolayer acted as a template for gold nanoparticle growth because of the monolayer's high micellar stability at the liquid-solid interface, uniform domain morphology, and ability to adsorb Au ions from the water subphase. UV-vis spectra and AFM and TEM images confirmed the formation of individual gold nanoparticles with an average size of 6 ± 1 nm in the P2VP-rich outer phase. This facile strategy is critical to the formation of ultrathin polymer-gold nanocomposite layers over large surface areas with confined, one-sided positioning of gold nanoparticles in an outer P2VP phase at polymer-silicon interfaces.