共查询到20条相似文献,搜索用时 62 毫秒
1.
Facially coordinating triamine ligands with a cyclic backbone: some structure-stability correlations
Neis C Petry D Demangeon A Morgenstern B Kuppert D Huppert J Stucky S Hegetschweiler K 《Inorganic chemistry》2010,49(21):10092-10107
Metal complex formation of the two cyclic triamines 6-methyl-1,4-diazepan-6-amine (MeL(a)) and all-cis-2,4,6-trimethylcyclohexane-1,3,5-triamine (Me(3)tach) was studied. The structure of the free ligands (H(x)MeL(a))(x+) and H(x)Me(3)tach(x+) (0 ≤ x ≤ 3) was investigated by pH-dependent NMR spectroscopy and X-ray diffraction experiments. The crystal structure of (H(2)Me(3)tach)(p-O(3)S-C(6)H(4)-CH(3))(2) showed a chair conformation with axial nitrogen atoms for the doubly protonated species. In contrast to a previous report, Me(3)tach was found to be a stronger base than the parent cis-cyclohexane-1,3,5-triamine (tach); pK(a)-values of H(3)Me(3)tach(3+) (25 °C, 0.1 M KCl): 5.2, 7.4, 11.2. The crystal structures of (H(3)MeL(a))(BiCl(6))·2H(2)O and (H(3)MeL(a))(ClO(4))Cl(2) exhibited two distinct twisted chair conformations of the seven membered diazepane ring. [Co(MeL(a))(2)](3+) (cis: 1(3+), trans: 2(3+)), trans-[Fe(MeL(a))(2)](3+) (3(3+)), [(MeL(a))ClCd(μ(2)-Cl)](2) (4), trans-[Cu(MeL(a))(2)](2+) (5(2+)), and [Cu(HMeL(a))Br(3)] (6) were characterized by single crystal X-ray analysis of 1(ClO(4))(3)·H(2)O, 2Br(3)·H(2)O, 3(ClO(4))(3)·0.8MeCN·0.2MeOH, 4, 5Br(2)·0.5MeOH, and 6·H(2)O. Formation constants and redox potentials of MeL(a) complexes were determined by potentiometric, spectrophotometric, and cyclovoltammetric measurements. The stability of [M(II)(MeL(a))](2+)-complexes is low. In comparison to the parent 1,4-diazepan-6-amine (L(a)), it is only slightly enhanced. In analogy to L(a), MeL(a) exhibited a pronounced tendency for forming protonated species such as [M(II)(HMeL(a))](3+) or [M(II)(MeL(a))(HMeL(a))](3+) (see 6 as an example). In contrast to MeL(a), Me(3)tach forms [M(II)L](2+) complexes (M = Cu, Zn) of very high stability, and the coordination behavior corresponds mainly to an "all-or-nothing" process. Molecular mechanics calculations showed that the low stability of L(a) and MeL(a) complexes is mainly due to a large amount of torsional strain within the pure chair conformation of the diazepane ring, required for tridentate coordination. This behavior is quite contrary to Me(3)tach and tacn (tacn =1,4,7-triazacyclononane), where the main portion of strain is already preformed in the free ligand, and the amount, generated upon complex formation, is comparably low. 相似文献
2.
The adsorption and dissociation of NH(3) on the clean and hydroxylated TiO(2) rutile (110) surfaces have been investigated by the first-principles calculations. The monodentate adsorbates such as H(3)N-Ti(a), H(2)N-Ti(a), N-Ti(a), H(2)N-O(a), HN-O(a), N-O(a) and H-O(a), as well as the bidentate adsorbate, Ti-N-Ti(a) can be formed on the clean surface. It is found that the hydroxyl group enhances the adsorption of certain adsorbates on the five-fold-coordinated Ti atoms (5c-Ti), namely H(2)N-Ti(a), HN-Ti(a), N-Ti(a) and Ti-N-Ti(a). In addition, the adsorption energy increases as the number of hydroxyl groups increases. On the contrary, the opposite effect is found for those on the two-fold-coordinated O atoms (2c-O). The enhanced adsorption of NH(x) (x = 1-2) on the 5c-Ti is due to the large electronegativity of the OH group, increasing the acidity of the Ti center. This also contributes to diminish the adsorption of NH(x) (x = 1-2) on the two-fold-coordinated O atoms (2c-O) decreasing its basicity. According to potential energy profile, the NH(3) dissociation on the TiO(2) surface is endothermic and the hydroxyl group is found to lower the energetics of H(2)N-Ti(a)+H-O(a) and HN-Ti(a)+2{H-O(a)}, but slightly raise the energetic of Ti-N-Ti(a)+3{H-O(a)} compare to those on the clean surface. However, the dissociation of NH(3) is found to occur on the hydroxylated surface with an overall endothermic by 31.8 kcal/mol and requires a barrier of 37.5 kcal/mol. A comparison of NH(3) on anatase surface has been discussed. The detailed electronic analysis is also carried out to gain insights into the interaction nature between adsorbate and surface. 相似文献
3.
The redox chemistry of tellurium-chalcogenide systems is examined via reactions of tellurium(IV) tetrachloride with Li[(t)()BuN(E)P(mu-N(t)Bu)(2)P(E)N(H)(t)Bu] (3a, E = S; 3b, E = Se). Reaction of TeCl(4) with 2 equiv of 3a in THF generates the tellurium(IV) species TeCl(3)[HcddS(2)][H(2)cddS(2)] 4a [cddS(2) = (t)BuN(S)P(mu-N(t)Bu)(2)P(S)N(t)Bu] at short reaction times, while reduction to the tellurium(II) complex TeCl(2)[H(2)cddS(2)](2) 5a is observed at longer reaction times. The analogous reaction of TeCl(4) and 3b yields only the tellurium(II) complex TeCl(2)[H(2)cddSe(2)](2) 5b. The use of 4 equiv of 3a or 3b produces Te[HcddE(2)](2) (6a (E = S) or 6b (E = Se)). NMR and EPR studies of the 5:1 reaction of 3a and TeCl(4) in THF or C(6)D(6) indicate that the formation of the Te(II) complex 6a via decomposition of a Te(IV) precursor occurs via a radical process to generate H(2)cddS(2). Abstraction of hydrogen from THF solvent is proposed to account for the formation of 2a. These results are discussed in the context of known tellurium-sulfur and tellurium-nitrogen redox systems. The X-ray crystal structures of 4a.[C(7)H(8)](0.5), 5a, 5b, 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) have been determined. The cyclodiphosph(V)azane dichalcogenide ligand chelates the tellurium center in an E,N (E = S, Se) manner in 4a.[C(7)H(8)](0.5), 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) with long Te-N bond distances in each case. Further, a neutral H(2)cddS(2) ligand weakly coordinates the tellurium center in 4a small middle dot[C(7)H(8)](0.5) via a single chalcogen atom. A similar monodentate interaction of two neutral ligands with a TeCl(2) unit is observed in the case of 5a and 5b, giving a trans square planar arrangement at tellurium. 相似文献
4.
The reactions between cis-Fe(dmpe)2H2 (dmpe = Me2PCH2CH2PMe2) (1) or cis-Fe(PP3)H2 (PP3 = P(CH2CH2PMe2)3) (2) and carbon dioxide (CO2), carbon disulfide (CS2), and carbonyl sulfide (COS) are investigated. At 300 K, additions of CO2 (1 atm), CS2 (2 equiv), and COS (1 atm) to 1 result in the formation of a stable transformato hydride, trans-Fe(dmpe)2(OCHO)H (3a), a trans-dithioformato hydride, trans-Fe(dmpe)2(SCHS)H (4a), and a trans-thioformato hydride, trans-Fe(dmpe)2(SCHO)H (5a), respectively. When CS2 and COS are added to cis-Fe(dmpe)2H2 at 195 K, a cis-dithioformato hydride, 4b, and a cis-thioformato hydride, 5b, respectively, are observed as the initially formed products, but there is no evidence of the corresponding cis-formato hydride upon addition of CO2 to cis-Fe(dmpe)2H2. Additions of excess CO2, CS2, and COS to 1 at lower temperatures (195-240 K) result in the formation of a trans-bis(formate), trans-Fe(dmpe)2(OCHO)2 (3b), a trans-bis(dithioformate), trans-Fe(dmpe)2(SCHS)2 (4c), and a cis-bis(thioformate), cis-Fe(dmpe)2(SCHO)2 (5c), respectively. trans-Fe(dmpe)2(SCHO)2 (5d) is prepared by the addition of excess COS at 300 K. Additions of CO2 (1 atm), CS2 (0.75 equiv), and COS (1 atm) to 2 at 300 K result in the formation of a thermally stable, geometrically constrained cis-formato hydride, cis-Fe(PP3)(OCHO)H (6a), a cis-dithioformato hydride, cis-Fe(PP3)(SCHS)H (7a), and a cis-thioformato hydride, cis-Fe(PP3)(SCHO)H (8a), respectively. Additions of excess CO2 and COS to 2 yield a cis-bis(formate), cis-Fe(PP3)(OCHO)2 (6b), and a thermally stable cis-bis(thioformate), cis-Fe(PP3)(SCHO)2 (8b), respectively. All complexes are characterized by multinuclear NMR spectroscopy, with IR spectroscopy and elemental analyses confirming structures of thermally stable complexes where possible. Complexes 3b and 5a are also characterized by X-ray crystallography. 相似文献
5.
Baya M Houghton J Daran JC Poli R Male L Albinati A Gutman M 《Chemistry (Weinheim an der Bergstrasse, Germany)》2007,13(19):5347-5359
Complexes [MoCp(#)(PMe(3))(2)H(3)] (Cp(#)=1,2,4-C(5)H(2)tBu(3), 2 a; C(5)HiPr(4), 2 b) have been synthesized from the corresponding compounds [MoCp(#)Cl(4)] (1 a, 1 b) and fully characterized, including by X-ray crystallography and by a neutron diffraction study for 2 a. Protonation of 2 a led to complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H(4)](+) (3 a) in THF and to [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)(MeCN)H(2)](+) (4 a) in MeCN. Complex 4 b analogously derives from protonation of 2 b in MeCN, whereas the tetrahydride complex 3 b is unstable. One-electron oxidation of 2 a and 2 b by [FeCp(2)]PF(6) produces the EPR-active 17-electron complexes 2 a(+) and 2 b(+). The former is thermally more stable than the latter and could be crystallographically characterized as the PF(6) (-) salt by X-ray diffraction, providing evidence for the presence of a stretched dihydrogen ligand (H...H=1.36(6) angstroms). Controlled thermal decomposition of 2 a(+) yielded the product of H(2) elimination, the 15-electron monohydride complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H]PF(6) (5 a), which was characterized by X-ray crystallography and by EPR spectroscopy at liquid He temperature. The compound establishes an equilibrium with the solvent adduct in THF. An electrochemical study by cyclic voltammetry provides further evidence for a rapid H(2) elimination process from the 17-electron complexes. In contrast to the previously investigated [MoCp*(dppe)H(3)](+) system (dppe=1,2-bis(diphenylphosphino)ethane; Cp*=pentamethylcyclopentadienyl), the decomposition of 2 a(+) by H(2) substitution with a solvent molecule appears to follow a dissociative pathway in MeCN. 相似文献
6.
The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine. 相似文献
7.
The three overlapping pK(a) values of N,N',N'-tris[2-(3-hydroxy-2-oxo-1,2-dihydropyridin-1-yl)acetamido]ethylamine, a tripodal hexadentate chelator formed from three 3-hydroxy-2(1H)-pyridinone moieties amide linked to tris-(2-aminoethyl)amine, were determined by simultaneous spectrophotometric and potentiometric titration. The data was analysed by non-linear regression with constraints to deal with (a) the highly correlated absorptivities and (b) the highly correlated pK(a) values. The three pK(a) values were optimized first from the spectrophotometric data (absorbance vs. pH) by non-linear regression to a model in which the molar absorptivity of the ith species ((i)) was constrained by the correlation equation (i) = epsilon (0) + (epsilon (3) - epsilon (0))i 3 with i = 0, 1, 2, 3, where (3) and (0) represent the molar absorptivities of the most protonated and least protonated species, respectively. The molar absorbitivity of the four species defined by three pK(a) values is, therefore, linearly related to proton stoichiometry. The pK(a) values were then optimized from the potentiometric data (pH vs. titrant volume) by non-linear regression to a model in which the three pK(a) values were constrained by the correlation equation pK(a(i)) = pK(a(int)) + b(i - 1) + (i - 2)log(3) where i = 1, 2 or 3. This expresses the three pK(a) values in terms of only two optimizable parameters, the intrinsic site pK(a) (pK(a(int))) and the interaction energy between sites (b). The fixed term (i - 2)log(3) accounts for the statistical effect on the pK(a) values of three equivalent ionizable sites. The modified analytical derivatives required for optimization of these parameters by the Gauss-Newton-Marquardt algorithm and the merits of optimizing pK(a) values with these two correlation equations are discussed. The optimized pK(a) values were 9.31 +/- 0.01, 8.75 +/- 0.01 and 8.19 +/- 0.01. The separation between pK(a) values is 0.58 comprising 0.477 for the statistical effect and 0.081 for the interaction energy while the intrinsic site pK(a) is 8.672 +/- 0.005. The tertiary amine at the centre of the tripodal backbone has a pK(a) of 5.88 +/- 0.03. 相似文献
8.
M(NMe2)4 (M = Zr, 1a; Hf, 1b) and the silyl anion (SiButPh2)- (2) in Li(THF)2SiButPh2 (2-Li) were found to undergo a ligand exchange to give [M(NMe2)3(SiButPh2)2]- (M = Zr, 3a; Hf, 3b) and [M(NMe2)5]- (M = Zr, 4a; Hf, 4b) in THF. The reaction is reversible, leading to equilibria: 2 1a (or 1b) + 2 2 <--> 3a (or 3b) + 4a (or 4b). In toluene, the reaction of 1a with 2 yields [(Me2N)3Zr(SiButPh2)2]-[Zr(NMe2)5Li2(THF)4]+ (5) as an ionic pair. The silyl anion 2 selectively attacks the -N(SiMe3)2 ligand in (Me2N)3Zr-N(SiMe3)2 (6a) to give 3a and [N(SiMe3)2]- (7) in reversible reaction: 6a + 2 2 <--> 3a + 7. The following equilibria have also been observed and studied: 2M(NMe2)4 (1a; 1b) + [Si(SiMe3)3]- (8) <--> (Me2N)3M-Si(SiMe3)3 (M = Zr, 9a; Hf, 9b) + [M(NMe2)5]- (M = Zr, 4a; Hf, 4b); 6a (or 6b) + 8 <--> 9a (or 9b) + [N(SiMe3)2]- (7). The current study represents rare, direct observations of reversible amide-silyl exchanges and their equilibria. Crystal structures of 5, (Me2N)3Hf-Si(SiMe3)3 (9b), and [Hf(NMe2)4]2 (dimer of 1b), as well as the preparation of (Me2N)3M-N(SiMe3)2 (6a; 6b) are also reported. 相似文献
9.
The complexes [Rh(Tp)(PPh(3))(2)] (1a) and [Rh(Tp)(P(4-C(6)H(4)F)(3))(2)] (1b) combine with PhC(2)H, 4-NO(2)-C(6)H(4)CHO and Ph(3)SnH to give [Rh(Tp)(H)(C(2)Ph)(PR(3))] (R = Ph, 2a; R = 4-C(6)H(4)F, 2b), [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PR(3))] (R = Ph, 3a), and [Rh(Tp)(H)(SnPh(3))(PR(3))] (R = Ph, 4a; R = 4-C(6)H(4)F, 4b) in moderate to good yield. Complexes 1a, 2b, 3a, and 4a have been structurally characterized. In 1a the Tp ligand is bidentate, in 2b, 3a, and 4a it is tridentate. Crystal data for 1a: space group P2(1)/c; a = 11.9664(19), b = 21.355(3), c = 20.685(3) A; beta = 112.576(7) degrees; V = 4880.8(12) A(3); Z = 4; R = 0.0441. Data for 2b: space group P(-)1; a = 10.130(3), b = 12.869(4), c = 17.038(5) A; alpha = 78.641(6), beta = 76.040(5), gamma = 81.210(6) degrees; V = 2100.3(11) A(3); Z = 2; R = 0.0493. Data for 3a: space group P(-)1; a = 10.0073(11), b = 10.5116(12), c = 19.874(2) A; alpha = 83.728(2), beta = 88.759(2), gamma = 65.756(2) degrees; V =1894.2(4) A(3); Z = 2; R = 0.0253. Data for 4a: space group P2(1)/c; a = 15.545(2), b = 18.110(2), c = 17.810(2) A; beta = 95.094(3) degrees; V = 4994.1(10) A(3); Z = 4; R = 0.0256. NMR data ((1)H, (31)P, (103)Rh, (119)Sn) are also reported. 相似文献
10.
Chen YQ Zhang J Cai S Hou XF Schumann H Jin GX 《Dalton transactions (Cambridge, England : 2003)》2007,(7):749-758
Metalladichalcogenolate cluster complexes [Cp'Co{E(2)C(2)(B(10)H(10))}]{Co2(CO)5} [Cp' = eta5-C5H5, E = S(3a), E = Se(3b); Cp' = eta5-C5(CH3)5, E = S(4a), E = Se(4b)], {CpCo[E(2)C(2)(B(10)H(10))]}(2)Mo(CO)2] [E = S(5a), Se(5b)], Cp*Co(micro2-CO)Mo(CO)(py)2[E(2)C(2)(B(10)H(10))] [E = S(6a), Se(6b)], Cp*Co[E(2)C(2)(B(10)H(10))]Mo(CO)2[E(2)C(2)(B(10)H(10))] [E = S(7a), Se(7b)], (Cp'Co[E(2)C(2)(B(10)H(10))]W(CO)2 [E(2)C(2)(B(10)H(10))] [Cp' = eta5-C5H5, E = S(8a), E = Se(8b); Cp' = eta5-C5(CH3)5, E = S(9a), E = Se(9b)], {CpCo[E(2)C(2)(B(10)H(10))]}(2)Ni [E = S(10a), Se(10b)] and 3,4-(PhCN(4)S)-3,1,2-[PhCN(4)SCo(Cp)S(2)]-3,1,2-CoC(2)B(9)H(8) 12 were synthesized by the reaction of [Cp'CoE(2)C(2)(B(10)H(10))] [Cp' = eta5-C5H5, E = S(1a), E = Se(1b); Cp' = eta5-C5(CH3)5, E = S(2a), E = Se(2b)] with Co2(CO)8, M(CO)3(py)3 (M = Mo, W), Ni(COD)2, [Rh(COD)Cl]2, and LiSCN4Ph respectively. Their spectrum analyses and crystal structures were investigated. In this series of multinuclear complexes, 3a,b and 4a,b contain a closed Co3 triangular geometry, while in complexes 5a-7b three different structures were obtained, the tungsten-cobalt mixed-metal complexes have only the binuclear structure, and the nickel-cobalt complexes were obtained in the trinuclear form. A novel structure was found in metallacarborane complex 12, with a B-S bond formed at the B(7) site. The molecular structures of 4a, 5a, 6a, 7b, 9a, 9b, 10a and 12 have been determined by X-ray crystallography. 相似文献
11.
JM Plane CL Whalley L Frances-Soriano A Goddard JN Harvey DR Glowacki AA Viggiano 《The Journal of chemical physics》2012,137(1):014310
The first excited electronic state of molecular oxygen, O(2)(a(1)Δ(g)), is formed in the upper atmosphere by the photolysis of O(3). Its lifetime is over 70 min above 75 km, so that during the day its concentration is about 30 times greater than that of O(3). In order to explore its potential reactivity with atmospheric constituents produced by meteoric ablation, the reactions of Mg, Fe, and Ca with O(2)(a) were studied in a fast flow tube, where the metal atoms were produced either by thermal evaporation (Ca and Mg) or by pulsed laser ablation of a metal target (Fe), and detected by laser induced fluorescence spectroscopy. O(2)(a) was produced by bubbling a flow of Cl(2) through chilled alkaline H(2)O(2), and its absolute concentration determined from its optical emission at 1270 nm (O(2)(a(1)Δ(g) - X(3)Σ(g) (-)). The following results were obtained at 296 K: k(Mg + O(2)(a) + N(2) → MgO(2) + N(2)) = (1.8 ± 0.2) × 10(-30) cm(6) molecule(-2) s(-1); k(Fe + O(2)(a) → FeO + O) = (1.1 ± 0.1) × 10(-13) cm(3) molecule(-1) s(-1); k(Ca + O(2)(a) + N(2) → CaO(2) + N(2)) = (2.9 ± 0.2) × 10(-28) cm(6) molecule(-2) s(-1); and k(Ca + O(2)(a) → CaO + O) = (2.7 ± 1.0) × 10(-12) cm(3) molecule(-1) s(-1). The total uncertainty in these rate coefficients, which mostly arises from the systematic uncertainty in the O(2)(a) concentration, is estimated to be ±40%. Mg + O(2)(a) occurs exclusively by association on the singlet surface, producing MgO(2)((1)A(1)), with a pressure dependent rate coefficient. Fe + O(2)(a), on the other hand, shows pressure independent kinetics. FeO + O is produced with a probability of only ~0.1%. There is no evidence for an association complex, suggesting that this reaction proceeds mostly by near-resonant electronic energy transfer to Fe(a(5)F) + O(2)(X). The reaction of Ca + O(2)(a) occurs in an intermediate regime with two competing pressure dependent channels: (1) a recombination to produce CaO(2)((1)A(1)), and (2) a singlet∕triplet non-adiabatic hopping channel leading to CaO + O((3)P). In order to interpret the Ca + O(2)(a) results, we utilized density functional theory along with multireference and explicitly correlated CCSD(T)-F12 electronic structure calculations to examine the lowest lying singlet and triplet surfaces. In addition to mapping stationary points, we used a genetic algorithm to locate minimum energy crossing points between the two surfaces. Simulations of the Ca + O(2)(a) kinetics were then carried out using a combination of both standard and non-adiabatic Rice-Ramsperger-Kassel-Marcus (RRKM) theory implemented within a weak collision, multiwell master equation model. In terms of atmospheric significance, only in the case of Ca does reaction with O(2)(a) compete with O(3) during the daytime between 85 and 110 km. 相似文献
12.
Using the dinucleating phenol-based ligand 2,6-bis[3-(pyridin-2-yl)pyrazol-1-ylmethyl]-4-methylphenol] (HL(2)), in its deprotonated form, the six new dinuclear complexes [M(II)(2)(L(2))(μ-O(2)CMe)(2)(MeCN)(2)][PF(6)] (M = Mn (2a), Co (3a), Zn (4a)) and [M(II)(2)(L(2))(μ-O(2)CMe)(2)(MeCN)(2)][BPh(4)] (M = Mn (2b), Co (3b), Zn (4b)) have been synthesized. Crystallographic analyses on 2b·2MeCN, 3b·2MeCN, and 4b·2MeCN reveal that these complexes have closely similar μ-phenoxo bis(μ-carboxylato) structures. The physicochemical properties (absorption and ESI-MS spectral data, 2a,b, 3a,b, and 4a,b; (1)H NMR, 4a,b) of the cations of 2a-4a are identical with those of 2b-4b. Each metal ion is terminally coordinated by a pyrazole nitrogen and a pyridyl nitrogen from a 3-(pyridin-2-yl)pyrazole unit and a solvent molecule (MeCN). Thus, each metal center assumes distorted-octahedral M(II)N(3)O(3) coordination. Temperature-dependent magnetic studies on Mn(II) and Co(II) dimers reveal the presence of intramolecular antiferromagnetic (J = -8.5 cm(-1)) for 2b and ferromagnetic exchange coupling (J = +2.51 cm(-1)) for 3b, on the basis of the Hamiltonian H = -JS(1)·S(2). The exchange mechanism is discussed on the basis of magneto-structural parameters (M···M distance). Spectroscopic properties of the complexes have also been investigated. The pH titration and kinetics of phosphatase (transesterification) activity on 2-hydroxypropyl-p-nirophenylphosphate (HPNP) were studied in MeOH/H(2)O (33%, v/v) with 2a-4a, due to solubility reasons. This comparative kinetic study revealed the effect of the metal ion on the rate of hydrolysis of HPNP, which has been compared with what we recently reported for [Ni(II)(2)(L(2))(μ-O(2)CMe)(2)(MeOH)(H(2)O)][ClO(4)] (1a). The efficacy in the order of conversion of substrate to product (p-nitrophenolate ion) follows the order 4a > 3a > 2a > 1a, under identical experimental conditions. Notably, this trend follows the decrease of pK(a) values of M(II)-coordinated water (7.95 ± 0.04 and 8.78 ± 0.03 for 1a, 7.67 ± 0.08 and 8.69 ± 0.06 for 2a, 7.09 ± 0.05 and 8.05 ± 0.06 for 3a, and 6.20 ± 0.04 and 6.80 ± 0.03 for 4a). In this work we demonstrate that the stronger the Lewis acidity (Z(eff)/r) of the metal ion, the more acidic is the M(II)-coordinated water and the greater is the propensity of the metal ion to catalyze hydrolysis of the activated phosphate ester HPNP. Notably, the observed k(2) values (M(-1) s(-1)) for Mn(II) (2a, 0.152), Co(II) (3a, 0.208), and Zn(II) (4a, 0.230) complexes (1a, 0.058; already reported) linearly correlate with Z(eff)/r values of the metal ion. In each case a pseudo-first-order kinetic treatment has been done. Kinetic data analysis of complexes 2a-4a were also done following Michaelis-Menten treatment (catalytic efficiency k(cat)/K(M) values 0.170 M(-1) s(-1) for 2a, 0.194 M(-1) s(-1) for 3a and 0.161 M(-1) s(-1) for 4a; for 1a the value is 0.089 M(-1) s(-1)). Temperature-dependent measurements were done to evaluate kinetic/thermodynamic parameters for the hydrolysis/transesterification of HPNP and yielded comparable activation parameters (E(a) (kJ mol(-1)): 71.00 ± 4.60 (1a; reported), 67.95 ± 5.71 (2a), 62.60 ± 4.46 (3a), 67.80 ± 3.25 (4a)) and enthalpy/entropy of activation values (ΔH(?) (kJ mol(-1)) = 68.00 ± 4.65 (1a; reported), 65.40 ± 5.72 (2a), 60.00 ± 4.47 (3a), 65.29 ± 3.26 (4a); ΔS(?) (J mol(-1) K(-1)) = -109.00 ± 13 (1a; reported), -107.30 ± 16 (2a), -122.54 ± 14 (3a), -104.67 ± 10 (4a)). The E(a) values for all the complexes are comparable, suggesting a closely similar reaction barrier, meaning thereby similar course of reaction. The ΔS(?) values are consistent with an associative process. Positive ΔH(?) values correspond to bond breaking of the activated complex as a result of nucleophilic attack at the phosphorus atom, releasing cyclic phosphate and p-nitrophenolate ion. These data have helped us to propose a common mechanistic pathway: deprotonation of a metal-bound species to form the effective nucleophile, binding of the substrate to the metal center(s), intramolecular nucleophilic attack on the electrophilic phosphorus atom with the release of the leaving group, and possibly regeneration of the catalyst. 相似文献
13.
The extensive search for the global minimum structure of Hf3 at the B3LYP/LANL2DZ level of theory revealed that D3h 3A2' (1a1'(2)1a2'(2)1e'(4)2a1'(2)1e'2) and D3h 1A1' (1a1'(2)2a1'(2)1e'(4)1a2'(2)3a1'2) are the lowest triplet and singlet states, respectively, with the triplet state being the lowest one. However, at the CASSCF(10,14)/Stuttgart+2f1g level of theory these two states are degenerate, indicating that at the higher level of theory the singlet state could be in fact the global minimum structure. The triplet D3h 3A2' (1a1'21a2'(2)1e'(4)2a1'(2)1e'2) structure is doubly (sigma- and pi-) aromatic and the singlet D3h 1A1' (1a1'(2)2a1'(2)1e'(4)1a2'(2)3a1'2) structure is the first reported triply (sigma-, pi-, and delta-) aromatic system. 相似文献
14.
Ishi-I T Crego-Calama M Timmerman P Reinhoudt DN Shinkai S 《Journal of the American Chemical Society》2002,124(49):14631-14641
In this paper, we report the enantioselective formation of a dynamic noncovalent double rosette assembly 1a(3).(CYA)(6) composed of three 2-pyridylcalix[4]arene dimelamines (1a) and six butylcyanuric acid molecules (BuCYA). The six 2-pyridyl functionalities of the assembly interact stereoselectively with chiral dicarboxylic acids 3a-e via two-point hydrogen-bonding interactions. One of the two enantiomeric assemblies (P- or M-) 1a(3).(CYA)(6) is formed in excess as the result of the complexation of the chiral diacids, resulting in formation of optically active assemblies. The complexations with dibenzoly tartaric acids D-3a and L-3a (3 equivalent), respectively, leading to the formation of diastereomeric assemblies (P)-1a(3).(BuCYA)(6).(D-3a)(3) and (M)-1a(3).(BuCYA)(6).(L-3a)(3) with 90% diastereomeric excess. The diastereomeric excess in (M)-1a(3).(BuCYA)(6).(L-3a)(3) is "memorized" when L-3a is removed by precipitation with ethlylenediamine (EDA). The assembly (M)-1a(3).(BuCYA)(6) is still optically active (90% enantiomeric excess), although none of its individual components are chiral. (M)-1a(3).(BuCYA)(6) has a high kinetic stability toward racemization (E(a) = 119 kJ mol(-)(1), half-life of (M)-1a(3).(BuCYA)(6) is ca. 1 week at 20 degrees C). 相似文献
15.
The oxidation of cysteine by [Mo(CN)(8)](3-) in deoxygenated aqueous solution at a moderate pH is strongly catalyzed by Cu(2+), to the degree that impurity levels of Cu(2+) are sufficient to dominate the reaction. Dipicolinic acid (dipic) is a very effective inhibitor of this catalysis, such that with 1 mM dipic, the direct oxidation can be studied. UV-vis spectra and electrochemistry show that [Mo(CN)(8)](4-) is the Mo-containing product. Cystine and cysteinesulfinate are the predominant cysteine oxidation products. The stoichiometric ratio (Deltan(Mo(V))/Deltan(cysteine)) of 1.4 at pH 10.8 is consistent with this product distribution. At pH 1.5, the reaction is quite slow and yields intractable kinetics. At pH 4.5, the rates are much faster and deviate only slightly from pseudo-first-order behavior. With 2 mM PBN (N-phenyl-tert-butyl nitrone) present at pH 4.5, the reaction rate is about 20% less and shows excellent pseudo-first-order behavior, but the stoichiometric ratio is not significantly changed. The rates also display a significant specific cation effect. In the presence of spin-trap PBN, the kinetics were studied over the pH range 3.48-12.28, with [Na(+)] maintained at 0.09-0.10 M. The rate law is -d[Mo(V)]/dt = k[cysteine](tot)[Mo(V)], with k = {2(k(b)K(a1)K(a2)[H(+)] + k(c)K(a1)K(a2)K(a3))}/([H(+)](3) + K(a1)[H(+)](2) + K(a1)K(a2)[H(+)] + K(a1)K(a2)K(a3)), where K(a1), K(a2), and K(a3) are the successive acid dissociation constants of HSCH(2)CH(NH(3)(+))CO(2)H. Least-squares fitting yields k(b) = (7.1 +/- 0.4) x 10(4) M(-1) s(-1) and k(c) = (2.3 +/-0.2) x 10(4) M(-1) s(-1) at mu = 0.1 M (NaCF(3)SO(3)) and 25 degrees C. A mechanism is inferred in which k(b) and k(c) correspond to electron transfer to Mo(V) from the thiolate forms of anionic and dianionic cysteine. 相似文献
16.
Morikawa T Funakoshi K Ninomiya K Yasuda D Miyagawa K Matsuda H Yoshikawa M 《Chemical & pharmaceutical bulletin》2008,56(7):956-962
The methanolic extract from the rhizomes of Boesenbergia rotunda (Zingiberaceae) was found to show inhibitory effect on tumor necrosis factor-alpha (TNF-alpha)-induced cytotoxicity in L929 cells (IC(50)=6.1 microg/ml). By bioassay-guided separation, four new prenylcalcones, (+)-krachaizin A (1a), (-)-krachaizin A (1b), (+)-krachaizin B (2a), and (-)-krachaizin B (2b), and four new prenylflavanones, rotundaflavones Ia (3a), Ib (3b), IIa (4a), and IIb (4b), were isolated together with 18 known constituents (5a-7b and 8-19). The structures of eight new compounds were elucidated on the basis of physicochemical evidence. Among them, (+)-krachaizin B (2a), (-)-krachaizin B (2b), (+)-4-hydroxypanduratin A (6a), (-)-4-hydroxypanduratin A (6b), (+)-isopanduratin A (7a), (-)-isopanduratin A (7b), alpinetin (10), cardamonin (14), and 2,6-dihydroxy-4-methoxydihydrochalcone (15) significantly inhibited TNF-alpha-induced cytotoxicity in L929 cells at 10 microM. In addition, 2a, 2b, (+)-panduratins A (5a), (-)-panduratin A (5b), 6a, 7b, and geranyl-2,4-dihydroxy-6-phenylbenzoate (17) were found to show strong inhibitory effects on aminopeptidase N activity. 相似文献
17.
The structure of P,P-bis(diisopropylamino)-4-phenyl-1,3,2lambda(5)-diazaphosphete, 1a, has been determined by a single-crystal X-ray diffraction study (C(19)H(33)N(4)P, monoclinic system, space group P2(1), a = 9.482(1) ?, b = 11.374(3) ?, c = 9.668(2) ?, beta = 97.16(1) degrees, Z = 2). According to quantum chemical calculations at an RHF level of optimization utilizing the 6-31g(d,p) basis set, 1a has a zwitterionic structure with the negative charge delocalized on the NCN allylic fragment and the positive charge localized at the phosphorus. Heterocycle 1a reacts with water and benzaldehyde affording N-phosphoranylbenzamidine 3 (95% yield) and the expected aza-Wittig adduct 4 (85% yield), respectively. Addition of 1 equiv of methyl trifluoromethanesulfonate and of 2 equiv of BH(3).THF to 1a affords cyclic phosphonium salt 5 (94% yield) and the bis(borane) adduct 6a (90% yield), respectively. Dimethyl acetylenedicarboxylate slowly reacts with 1a giving rise to 1,3,4lambda(5)-diazaphosphinine, 9, in 70% yield. The X-ray crystal structures of products 2,3, and 6a are reported (2: C(26)H(38)N(5)P, monoclinic system, space group C2/c, a = 16.337(8) ?, b = 19.810(2) ?, c = 8.800(2) ?, beta = 117.68(2) degrees, Z = 4. 3: C(19)H(35)N(4)OP, orthorhombic system, space group P2(1)2(1)2(1), a = 9.090(1) ?, b = 12.955(2) ?, c = 17.860(3) ?, Z = 4. 6a: C(19)H(39)B(2)N(4)P, orthorhombic system, space group P2(1)2(1)2(1), a = 10.340(1) ?, b = 13.247(1) ?, c = 16.996(1) ?, Z = 4). 相似文献
18.
A series of hetero- and homo-dinuclear complexes with direct metal-metal interaction are synthesized through reaction of Cp*Rh[E(2)C(2)(B(10)H(10))] (E = S (1a), Se (1b)) and CpRh[S(2)C(2)(B(10)H(10))] (2a) with low valent half-sandwich CpCo(CO)(2) or CpRh(C(2)H(4))(2) under moderate conditions. The resulting products, namely (Cp*Rh)(CpCo)[E(2)C(2)(B(10)H(10))] (E = S(3a); Se(3b)), (Cp*Rh)(CpRh)[E(2)C(2)(B(10)H(10))] (E = S(4a); Se(4b)) and (CpRh)(CpRh)[S(2)C(2)(B(10)H(10))] (5a), are fully characterized by IR and NMR spectroscopy and elemental analysis. The molecular structures of 3a, 3b, 4a, 4b and 5a are established by X-ray crystallography analyses, and the Rh-Co (2.4778(11) (3a) and 2.5092(16) (3b) A) and Rh-Rh bonds (2.5721(8) (4a), 2.6112(10) (4b), 2.5627(10) (5a) A) fall in the range of single bonds. 相似文献
19.
We investigated the dissociative ionization of formaldehyde (CH(2)O) and ethene (C(2)H(4)) produced from photolysis of 1,3-trimethylene oxide at 193 nm using a molecular-beam apparatus and vacuum-ultraviolet radiation from an undulator for direct ionization. The CH(2)O (C(2)H(4)) product suffers from severe dissociative ionization to HCO(+) (C(2)H(3) (+) and C(2)H(2) (+)) even though photoionization energy is as small as 9.8 eV. Branching ratios of fragmentation of CH(2)O and C(2)H(4) following ionization are revealed as a function of kinetic energy of products using ionizing photons from 9.8 to 14.8 eV. Except several exceptions, branching ratios of daughter ions increase with increasing photon energy but decrease with increasing kinetic energy. The title reaction produces CH(2)O and C(2)H(4) mostly on electronic ground states but a few likely on triplet states; C(2)H(4) (a(3)B(1u)) seems to have a yield greater than CH(2)O (a(3)A(2)). The distinct features observed at small kinetic energies of daughter ions are attributed to dissociative ionization of photoproducts CH(2)O (a(3)A(2)) and C(2)H(4) (a(3)B(1u)). The observation of triplet products indicates that intersystem crossing occurs prior to fragmentation of 1,3-trimethylene oxide. 相似文献
20.
BiPd(2)O(4) and PbPd(2)O(4) were synthesized at high pressure of 6 GPa and 1500 K. Crystal structures of BiPd(2)O(4) and PbPd(2)O(4) were studied with synchrotron X-ray powder diffraction. BiPd(2)O(4) is isostructural with PbPt(2)O(4) and crystallizes in a triclinic system (space group P1, a = 5.73632(4) ?, b = 6.02532(5) ?, c = 6.41100(5) ?, α = 114.371(1)°, β = 95.910(1)°, and γ = 111.540(1)° at 293 K). PbPd(2)O(4) is isostructural with LaPd(2)O(4) and BaAu(2)O(4) and crystallizes in a tetragonal system (space group I4(1)/a, a = 5.76232(1) ?, and c = 9.98347(2) ? at 293 K). BiPd(2)O(4) shows ordering of Pd(2+) and Pd(4+) ions, and it is the third example of compounds with ordered arrangements of Pd(2+) and Pd(4+) in addition to Ba(2)Hg(3)Pd(7)O(14) and KPd(2)O(3). In PbPd(2)O(4), the following charge distribution is realized Pb(4+)Pd(2+)(2)O(4). PbPd(2)O(4) shows a structural phase transition from I4(1)/a to I2/a at about 240 K keeping basically the same structural arrangements (space group I2/a, a = 5.77326(1) ?, b = 9.95633(2) ?, c = 5.73264(1) ?, β = 90.2185(2)° at 112 K). BiPd(2)O(4) is nonmagnetic while PbPd(2)O(4) exhibits a significant temperature-dependent paramagnetic moment of 0.46μ(B)/f.u. between 2 and 350 K. PbPd(2)O(4) shows metallic conductivity, and BiPd(2)O(4) is a semiconductor between 2 and 400 K. 相似文献