Molecular structure, IR spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole by density functional theory and ab initio Hartree–Fock calculations

Quantum chemistry calculations have been performed using Gaussian03 program to compute optimized geometry, harmonic vibrational frequency along with intensities in IR and Raman spectra and atomic charges at RHF/6-31+G*, B3LYP/6-31+G* and B3LYP/6-31++G* levels for 2-mercaptobenzothiazole (MBT, C₇H₅NS₂) and 2-mercaptobenzoxazole (MBO, C₇H₅NOS) in the ground state. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR and FT-Raman spectra. The results show that the scaled theoretical vibrational frequencies is very good agreement with the experimental values. A detailed interpretation of the infrared and Raman spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole was reported. Comparison of calculated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

Molecular structure and vibrational spectra of N-mesylhydroxylamin and N-mesyl-O-methylhydroxylamin by density functional theory and ab initio Hartree–Fock calculations

The molecular geometry and vibrational frequencies of N-mesylhydroxylamin (N-MHN) and N-mesyl-O-methylhydroxylamin (N-MMHN) in the ground state have been calculated using the Hartree–Fock and density functional method (B3LYP) with 6-31G(d) basis set. The optimized geometric band lengths and bond angles obtained by using HF and DFT (B3LYP) show the best agreement with the experimental data. Comparison of the observed fundamental vibrational frequencies of N-MHN and N-MMHN and calculated results by density functional B3LYP and Hartree–Fock methods indicate that B3LYP is superior to the scaled Hartree–Fock approach for molecular vibrational problems.     

Molecular structure and vibrational spectra of lepidine and 2-chlorolepidine by density functional theory and ab initio Hartree–Fock Calculations

The molecular geometry and vibrational frequencies of lepidine and 2-chlorolepidine in the ground state have been calculated by using the Hartree–Fock and density functional methods (B3LYP) with 6-31G (d) as the basis set. The optimized geometric bond lengths obtained by using B3LYP and bond angles obtained by HF that correspond to the experimental values of 2-cl-lepidine molecule were given. Comparison of the observed fundamental vibrational frequencies of lepidine and 2-chlorolepidine, and calculated results by density functional B3LYP and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock approach for molecular vibrational problems.     

FT-IR, FT-Raman vibrational spectra and molecular structure investigation of 2-chloro-4-methylaniline: A combined experimental and theoretical study

In this work, the experimental and theoretical vibrational spectra of 2-chloro-4-methylaniline (2Cl4MA, C₇H₈NCl) were studied. FT-IR and FT-Raman spectra of 2Cl4MA in the liquid phase have been recorded in the region 4000–400 cm⁻¹ and 3500–50 cm⁻¹, respectively. The structural and spectroscopic data of the molecule in the ground state have been calculated by using Hartree-Fock (HF) and density functional method (B3LYP) with the 6-31G(d), 6-31G(d,p), 6-31+G(d,p), 6-31++G(d,p) and 6-311G(d), 6-311G(d,p), 6-311+G(d,p), 6-311++G(d,p) basis sets. The vibrational frequencies have been calculated and scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The DFT-B3LYP/6-311++G(d,p) calculations have been found more reliable than the ab initio HF/6-311++G(d,p) calculations for the vibrational study of 2Cl4MA. The optimized geometric parameters (bond lengths and bond angles) were compared with experimental values of aniline and p-methylaniline molecules.     

Molecular structure and vibrational spectra of indole and 5-aminoindole by density functional theory and ab initio Hartree–Fock calculations

The molecular geometry and vibrational frequencies of indole and 5-aminoindole in the ground state have been calculated by using the Hartree–Fock and density functional method with 6-311++G(d,p) basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with the experimental values. Comparison of the observed fundamental vibrational frequencies of indole and 5-aminoindole with the calculated results by density functional and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock approach for molecular vibrational problems. The theoretical spectrograms for FT-IR spectrum of 5-aminoindole have been constructed.     

Molecular structure and vibrational spectra of phenobaraitone by density functional theory and ab initio hartree-Fock calculations

Quantum chemistry calculations have been performed using Gaussian03 program to compute optimized geometry, harmonic vibrational frequency along with intensities in IR and Raman spectra at RHF/6-31++G** and B3LYP/6-31++G** levels for phenobarbitone (C₁₂H₁₂N₂O₃) in the ground state. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR and FT-Raman spectra. Theoretical vibrational spectra of the title compound were interpreted by means of potential energy distributions (PEDs) using MOLVIB program. A detailed interpretation of the infrared spectra of the title compound is reported. On the basis of the agreement between the calculated and observed results, the assignments of fundamental vibrational modes of phenobarbitone were examined and some assignments were proposed. The theoretical spectrograms for FT-IR and FT-Raman spectra of the title compound have been constructed.     

Vibrational spectra, conformations, ab initio calculations and vibrational assignments of 3-pentyn-2-ol

The infrared spectra of 3-pentyn-2-ol, CH₃CCCH(OH)CH₃, have been recorded as a vapour and liquid at ambient temperature, as a solid at 78 K in the 4000–50 cm⁻¹ range and isolated in an argon matrix at ca. 5 K. Infrared spectra of the solid phase at 78 K were obtained before and after annealing to temperatures of 120 and 130 K. The IR spectra of the solid were quite similar to that of the liquid.

Raman spectra of the liquid were recorded at room temperature and at various temperatures between 295 and 153 K. Spectra of an amorphous and annealed solid were recorded at 78 K. In the variable temperature Raman spectra, some bands changed in relative intensity and were interpreted in terms of conformational equilibria between the three possible conformers. Complete assignments were made for all the bands of the most stable conformer in which OH is oriented anti to C₁(a_Me). From various bands assigned to a second conformer in which OH is oriented anti to H_gem(a_H), the conformational enthalpy differences was found to be between 0.4 and 0.8 kJ mol⁻¹. The highest energy conformer with OH anti to C₃(a_C) was not detected.

Quantum-chemical calculations have been carried out at the MP2 and B3LYP levels with a variety of basis sets. Except for small basis set calculations for which the a_H conformer had slightly lower energy, all the calculations revealed that a_Me was the low energy conformer. The B3LYP/cc-pVTZ calculations suggested the a_Me conformer as more stable by 0.8 and 8.3 kJ mol⁻¹ relative to a_H an a_C, respectively. Vibrational wavenumbers and infrared and Raman band intensities for two of the three conformers are reported from B3LYP/cc-pVTZ calculations.     

Far infrared spectra, conformational equilibria, vibrational assignments, ab initio calculations and structural parameters for 2-bromoethanol

The far infrared spectrum from 370 to 50 cm⁻¹ of gaseous 2-bromoethanol, BrCH₂CH₂OH, was recorded at a resolution of 0.10 cm⁻¹. The fundamental O–H torsion of the more stable gauche (Gg′) conformer, where the capital G refers to internal rotation around the C–C bond and the lower case g to the internal rotation around the C–O bond, was observed as a series of Q-branch transitions beginning at 340 cm⁻¹. The corresponding O–H torsional modes were observed for two of the other high energy conformers, Tg (285 cm⁻¹) and Tt (234 cm⁻¹). The heavy atom asymmetric torsion (rotation around C–C bond) for the Gg′ conformer has been observed at 140 cm⁻¹. Variable temperature (−63 to −100°C) studies of the infrared spectra (4000–400 cm⁻¹) of the sample dissolved in liquid xenon have been recorded. From these data the enthalpy differences have been determined to be 411±40 cm⁻¹ (4.92±0.48 kJ/mol) for the Gg′/Tt and 315±40 cm⁻¹ (3.76±0.48 kJ/mol) for the Gg′/Tg, with the Gg′ conformer the most stable form. Additionally, the infrared spectrum of the gas, and Raman spectrum of the liquid phase are reported. The structural parameters, conformational stabilities, barriers to internal rotation and fundamental frequencies have been obtained from ab initio calculations utilizing different basis sets at the restricted Hartree–Fock or with full electron correlation by the perturbation method to second order. The theoretical results are compared to the experimental results when appropriate. Combining the ab initio calculations with the microwave rotational constants, r₀ adjusted parameters have been obtained for the three 2-haloethanols (F, Cl and Br) for the Gg′ conformers.     

FT-IR, NIR-FT-Raman and gas phase infrared spectra of 3-aminoacetophenone by density functional theory and ab initio Hartree-Fock calculations

The gas phase infrared spectrum of 3-aminoacetophenone (3AAP) was measured in the range 5000-500cm(-1) and with a resolution of 0.5cm(-1). The Fourier transform Raman (FT-Raman) and Fourier transform infrared (FT-IR) spectra of 3AAP were recorded in the solid phase. Geometry optimizations were done without any constraint and several thermodynamic parameters were calculated for the minimum energy conformer at ab initio and density functional theory (DFT) levels invoking 6-311G(2df 2p) basis set and the results are compared with the experimental values. Harmonic-vibrational wavenumber was also calculated for the minimum energy conformer at ab initio and DFT levels using 6-31G(d,p) basis set and the results are compared with related molecules. With the help of specific scaling procedures, the observed vibrational wavenumbers in gas phase, FT-IR and FT-Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range, the error obtained was in general very low. The appropriate theoretical spectrogram for the FT-IR spectra of the title molecule is also constructed.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Molecular structure and vibrational assignment of melaminium phthalate by density functional theory (DFT) and ab initio Hartree-Fock (HF) calculations

The molecular geometry, the normal mode frequencies and corresponding vibrational assignment of melaminium phthalate (C₃H₇N₆⁺·C₈H₅O₄⁻) in the ground state were performed by HF and B3LYP levels of theory using the 6-31G(d) basis set. The optimized bond length numbers with bond angles are in good agreement with the X-ray data. The vibrational spectra of melaminium phthalate which is calculated by HF and B3LYP methods, reproduces vibrational wave numbers with an accuracy which allows reliable vibrational assignments. The title compound has been studied in the 4000–100 cm⁻¹ region where the theoretical evaluation and assignment of all observed bands were made.     

Ab initio and DFT studies of the molecular structures and vibrational spectra of succinonitrile

The Molecular structure, conformational stability and vibrational frequencies of succinonitrile NCCH2CH2CN have been investigated with ab initio and density functional theory (DFT) methods implementing the standard 6-311++G* basis set. The potential energy surfaces (PES) have been explored at DFT-B3LYP, HF and MP2 levels of theory. In agreements with previous experimental results, the molecule was predicted to exist in equilibrium mixture of trans and gauche conforms with the trans form being slightly lower in energy. The vibrational frequencies and the corresponding vibrational assignments of succinonitrile in both C2h and C2 symmetry were examined theoretically and the calculated Infrared and Raman spectra of the molecule were plotted. Observed frequencies for normal modes were compared with those calculated from normal mode coordinate analysis carried out on the basis of ab initio and DFT force fields using the standard 6-311++G* basis set of the theoretical optimized geometry. Theoretical IR intensities and Raman activities are reported.     

Raman and infrared spectra, conformational stability, barriers to internal rotation, vibrational assignment, and ab initio calculations of 3-methyl-3-butenenitrile

The Raman (3500-30 cm⁻¹) spectra of liquid and solid and the infrared (3500-40 cm⁻¹) spectra of gaseous and solid 3-methyl-3-butenenitrile, CH₂C(CH₃)CH₂CN, have been recorded. Both cis and gauche conformers have been identified in the fluid phases but only the cis form remains in the solid. Variable temperature (−55 to −100 °C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 163±16 cm⁻¹ (1.20±0.19 kJ mol⁻¹), with the cis conformer the more stable rotamer. It is estimated that there is 48±2% of the gauche conformer present at  25°C. A complete vibrational assignment is proposed for the cis conformer based on infrared band contours, relative intensities, depolarization ratios and group frequencies. Several of the fundamentals for the gauche conformer have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries have been obtained for both rotamers by ab initio calculations employing the 6-31G(d), 6-311G(d,p), 6-311+G(d,p) and 6-311+G(2d,2p) basis sets at the levels of restricted Hartree-Fock (HF) and/or Møller-Plesset perturbation theory to the second order (MP2). Only with the 6-311G(2d,2p) and 6-311G(2df,2pd) basis sets with or without diffuse functions is the cis conformer predicted to be more stable than the gauche form. The potential energy terms for the conformational interchange have been obtained at the MP2(full)/6-311+G(2d,2p) level, and compared to those obtained from the experimental data. The results are discussed and compared to the corresponding quantities obtained for some similar molecules.     

Vibrational spectra and potential energy distributions for 3-cyclopropenecarboxaldehyde by density functional and normal coordinate calculations

The structural stability and internal rotation in 3-cylopropenecarboxaldehyde were investigated by ab initio calculations with 6-311++G^** basis set. The calculations were carried out at the restricted Hartree–Fock (HF) and the Density Functional B3LYP levels. The vibrational frequencies were computed at HF and DFT-B3LYP levels. Normal coordinate calculations were carried out and potential energy distributions were calculated for the cis and the trans conformers of the molecule.     

Infrared and Raman spectra, ab initio calculations and vibrational assignment for 3-fluoro-1-butyne

The infrared (3500-80 cm⁻¹) and Raman (3500-20 cm⁻¹) spectra of 3-fluoro-1-butyne, CH₃CHFCCH, have been recorded for the gas and solid. Additionally, the Raman spectrum of the liquid has also been recorded to aid in the vibrational assignment. Ab initio electronic structure calculations of energies, geometrical structures, vibrational frequencies, infrared intensities, Raman activities and the potential energy function for the methyl torsion have been calculated to assist in the interpretation of the spectra. The fundamental torsional mode is observed at 251 cm⁻¹ with a series of sequence peaks falling to lower frequency. The three-fold methyl torsional barrier is calculated to be 1441 ± 20 cm⁻¹ (4.12 ± 0.06 kcal mol⁻¹) where the uncertainty is partly due to the uncertainty in values of the V₆ term. A complete vibrational assignment is proposed based on band contours, relative intensities, and ab initio predicted frequencies. Several fundamentals are significantly shifted in the condensed phases compared to values in the vapor state.     

An ab initio study on the geometries and vibrational frequencies of hydrazoic acid and methyl azide

The geometric parameters for hydrazoic acid and methyl azide were optimized at the HF/6-31G^** and MP2/6-31G^** levels and the vibrational frequencies of the compounds were calculated by use of these optimized geometries. The experimental frequencies are assigned on the basis of the calculated results. The effects of deutero-substitution and substitution of hydrogen in HN₃ by a methyl group are also discussed.     

Ab initio and density functional theory calculations of molecular structure and vibrational spectrum of ethyl azidoacetate

Here we report ab initio and density functional results for molecular properties of ethyl azidoacetate (N₃CH₂COOC₂H₅) and for the corresponding singly ionized structure (N₃CH₂COOC₂H₅⁺). Ab initio ionization energies based on Koopmans’ theorem are in excellent agreement with the experimental data from ultraviolet photoelectron spectroscopy. DFT adiabatic energy differences between neutral and ionized structures are very sensitive to electronic correlation effects and are not in very good agreement with experiment. The results for the structure and vibrational frequencies are compared with the experimental data of related molecular structures.     

Ab initio and DFT calculations for the structure and vibrational spectra of cyclopentene and its isotopomers

Ab initio calculations using the MP2/cc-pVTZ basis set do an excellent job of predicting the inversion barrier (247 vs. 232 cm⁻¹) and dihedral angle (26°) of cyclopentene. DFT calculations also do an excellent job of predicting the vibrational frequencies of the d₀, d₁, d₄, and d₈ isotopomers. They have also allowed the reassignments of several of the vibrational frequencies.     

Molecular structure, vibrational spectra and HOMO, LUMO analysis of yohimbine hydrochloride by density functional theory and ab initio Hartree-Fock calculations

Yohimbine hydrochloride (YHCl) is an aphrodisiac and promoted for erectile dysfunction, weight loss and depression. The optimized geometry, total energy, potential energy surface and vibrational wavenumbers of yohimbine hydrochloride have been determined using ab initio, Hartree–Fock (HF) and density functional theory (DFT/B3LYP) method with 6-311++G(d,p) basis set. A complete vibrational assignment is provided for the observed Raman and IR spectra of YHCl. The UV absorption spectrum was examined in ethanol solvent and compared with the calculated one in gas phase as well as in solvent environment (polarizable continuum model, PCM) using TD-DFT/6-31G basis set. These methods are proposed as a tool to be applied in the structural characterization of YHCl. The calculated highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) with frontier orbital gap are presented.     

Ab initio calculations on the molecular structure of fluorocyanopolyynes

The molecular structure of the first three members of the fluorocyanopolyynes was studied by ab initio Hartree-Fock calculations with a polarized double zeta basis set and at MP2 level with the same basis set. Alternating triple and single bonds were found; a theoretical estimate of rotational constants and dipole moments was performed and a comparison with the available experimental data was made. An analysis of the theoretical vibrational frequencies of the title compounds was carried out.