共查询到20条相似文献,搜索用时 781 毫秒
1.
采用超声波辐射法制备了具有介孔结构的高浓度氮掺杂TiO2纳米晶(N/TiO2).采用N2物理吸附、X射线粉末衍射、X射线光电子能谱、透射电镜、光致发光谱和紫外-可见漫反射光谱等手段对N/TiO2进行了表征.以波长为400~660nm的可见光为光源,以水体污染物邻苯二甲酸二甲酯为降解对象,考察了不同制备方法对N/TiO2光催化性能的影响.结果表明,超声波辐射使氮掺杂浓度提高了2.2倍,该法制备的N/TiO2同时具有较好的介孔结构,表现了更高的光催化降解邻苯二甲酸二甲酯的活性.其活性提高的主要原因是N/TiO2含有更高浓度的氮和对可见光具有更强的吸收能力. 相似文献
2.
N掺杂对TiO2形态结构及光催化活性的影响 总被引:5,自引:0,他引:5
以TiCl4为钛源,采用酸催化水解法合成TiO2前驱体,在NH3/N2气氛下经不同温度处理制得浅黄色的N掺杂TiO2(TON)光催化剂。以苯酚为模型物,考察了催化剂在紫外光区、可见光区及太阳下催化活性;采用DRS、XPS、XRD、FTIR、SEM及低温氮物理吸附对光催化剂的晶相结构、光谱特征和表面结构等进行表征。系统研究了N掺杂对TiO2形态结构及光催化活性的影响。结果表明,掺杂N以阴离子形式进入TiO2体相中置换晶格中的O,适宜温度下制得适量N掺杂的TON在紫外光区、可见光区及太阳光下均表现出较高的活性。N掺杂在TiO2表面生成Ti-O-N键,形成新的能级结构,使催化剂的吸收红移至450~550 nm,诱发TiO2可见光催化活性。同时高温下煅烧,N掺杂可抑制TiO2晶粒生长,减缓TiO2粒子间团聚,提高锐钛矿相向金红石相转变温度,减缓相转化速度。 相似文献
3.
为了满足低温制备可见光光催化材料的需要,采用溶胶-凝胶法制备TiO2纳米晶溶胶,再与聚乙烯基吡咯烷酮(PVP)直接反应制备N掺杂TiO2可见光光催化剂。通过XPS分析,说明N取代了部分晶格中的O,UV-Vis漫反射吸收光谱显示,光催化剂具有明显的可见光响应,这是由于N原子的2p轨道位于O原子的2p轨道之上,从而使得价带和导带间的能量带隙变窄,引起吸收带红移,产生明显的可见光吸收。依靠亚甲基兰(MB)的可见光降解实验证明,N掺杂光催化剂具有良好的可见光光催化活性,16 h MB降解率接近25%。 相似文献
4.
本工作采用改进的溶胶-凝胶法和浸渍法制备了TiO2掺杂稀土离子La3+的La/TiO2光催化剂,运用XRD、N2吸附脱附、紫外可见漫反射光谱(DRS)、表面光电压谱(SPS)等手段进行表征,同时利用原位红外技术考察了La/TiO2样品光催化降解乙烯、丙酮、苯的气-固相光催化氧化反应,对其光催化降解有机污染物的过程进行了研究。结果表明,TiO2经适量La3+掺杂后,锐钛矿晶型的含量增加,晶粒度减小,比表面积增大,禁带宽度增加,表面光电压信号增强,光生电子-空穴对有效分离;La/TiO2样品对乙烯、丙酮、苯的光催化性能与纯TiO2相比均有不同程度的改善,乙烯可以被光催化氧化完全矿化生成CO2,而丙酮被光催化氧化可能生成中间产物丙酸,苯被光催化氧化可能生成中间产物苯酚和苯醌。 相似文献
5.
以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO2皆为锐钛矿相, 金属Ag颗粒沉积在TiO2表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m2·g-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO2对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性. 相似文献
6.
以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO2皆为锐钛矿相, 金属Ag颗粒沉积在TiO2表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m2·g-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO2对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性. 相似文献
7.
以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO2皆为锐钛矿相, 金属Ag颗粒沉积在TiO2表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m2·g-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO2对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性. 相似文献
8.
以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO2皆为锐钛矿相, 金属Ag颗粒沉积在TiO2表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m2·g-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO2对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性. 相似文献
9.
以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO2皆为锐钛矿相, 金属Ag颗粒沉积在TiO2表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m2·g-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO2对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性. 相似文献
10.
以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO2皆为锐钛矿相, 金属Ag颗粒沉积在TiO2表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m2·g-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO2对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性. 相似文献
11.
Xiaohui Li 《Acta Physico》2008,24(11):2019-2024
N-F codoped TiO2 (TONF) photocatalysts were prepared using acid catalyzed hydrolysis method from mixed aqueous solution of TiCl4 and NH4F. The photocatalytic activity of the TONF was evaluated through the degradation of phenol under both visible and UV light irradiation. X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), scanning electron microscope (SEM), and N2 adsorption isotherm were used to characterize the obtained powders. The results showed that N-F codoped TiO2 exhibited significant improvement of visible light catalytic activity. N-F codoping could improve dispersion of TiO2, inhibit particle size agglomeration, and retard phase transformation. Doped N could extend the light response of TiO2 to visible light region. In addition, narrower band gap formed by F-doping was beneficial to the high visible light photocatalytic activity. 相似文献
12.
B,N-TiO2 photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH3 at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO2 were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO2 lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 °C. Higher temperature may form many oxygen vacancies and Ti3+ species, resulting in the decrease of photocatalytic activity in visible light. 相似文献
13.
Xiaosong Zhou Feng Peng Hongjuan Wang Hao Yu 《Journal of solid state chemistry》2011,184(11):3002-3007
Boron and nitrogen codoped TiO2 nanorods (BNTRs) were synthesized via two-step hydrothermal reactions using TiN as a starting material. The as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscope (SEM), transmission electron microscopy and X-ray photoelectron spectroscopy techniques. The results showed that TiO2 nanorods with the diameter of approximately 50–100 nm and the length of several micrometers were doped by the interstitial N and B. The nanorods were firstly formed in the hydrothermal synthesis of nitrogen doped TiO2. The growing process of nanorods was observed by SEM and a most probable formation mechanism of the trititanate nanorods was proposed. The BNTRs showed a higher photocatalytic activity and a bigger photocurrent response than N–TiO2 nanorods under visible light irradiation. 相似文献
14.
采用水热法,以纳米管钛酸为前驱物制备了Bi掺杂的TiO2,并利用X射线衍射、透射电子显微镜、X射线光电子能谱、紫外-可见漫反射光谱等手段对样品进行了表征. 以甲基橙的光催化降解为模型反应评价了样品的可见光催化性能. 结果表明,Bi离子并没有进入TiO2的晶格中,而是以BiOCl的形式存在. 所制得的BiOCl/TiO2复合物对甲基橙降解表现出较优越的可见光催化活性;当Bi/Ti摩尔比为1%,水热温度为130℃时,所制催化剂的光催化性能最佳,并对光催化活性提高的机理进行了讨论. 同时,该催化剂对4-氯苯酚降解也表现出较高的光催化性能. 相似文献
15.
Jiaguo Yu Qin Li Shengwei Liu Mietek Jaroniec 《Chemistry (Weinheim an der Bergstrasse, Germany)》2013,19(7):2433-2441
Exploiting advanced photocatalysts under visible light is of primary significance for the development of environmentally relevant photocatalytic decontamination processes. In this study, the ionic liquid (IL), 1‐butyl‐3‐methylimidazolium tetrafluoroborate, was employed for the first time as both a structure‐directing agent and a dopant for the synthesis of novel fluorinated B/C‐codoped anatase TiO2 nanocrystals (TIL) through hydrothermal hydrolysis of tetrabutyl titanate. These TIL nanocrystals feature uniform crystallite and pore sizes and are stable with respect to phase transitions, crystal ripening, and pore collapse upon calcination treatment. More significantly, these nanocrystals possess abundant localized states and strong visible‐light absorption in a wide range of wavelengths. Because of synergic interactions between titania and codopants, the calcined TIL samples exhibited high visible‐light photocatalytic activity in the presence of oxidizing Rhodamine B (RhB). In particular, 300 °C‐calcined TIL was most photocatalytically active; its activity was much higher than that of TiO1.98N0.02 and reference samples (TW) obtained under identical conditions in the absence of ionic liquid. Furthermore, the possible photocatalytic oxidation mechanism and the active species involved in the RhB degradation photocatalyzed by the TIL samples were primarily investigated experimentally by using different scavengers. It was found that both holes and electrons, as well as their derived active species, such as .OH, contributed to the RhB degradation occurring on the fluorinated B/C‐codoped TiO2 photocatalyst, in terms of both the photocatalytic reaction dynamics and the reaction pathway. The synthesis of the aforementioned novel photocatalyst and the identification of specific active species involved in the photodegradation of dyes could shed new light on the design and synthesis of semiconductor materials with enhanced photocatalytic activity towards organic pollutants. 相似文献
16.
Wentao Yi Chunyan Yan Peng Yan Faqiang Li 《Journal of Sol-Gel Science and Technology》2014,69(2):386-396
Sulfur and copper codoped TiO2 nanoparticles were prepared by sol-hydrothermal process. And the samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectra analysis, scanning electron microscopy, Brunauer Emmett Teller analysis, UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectra and X-ray fluorescence analysis. It was found that the S, Cu-codoped TiO2 became amorphous with the increase of Cu content, and copper on the surface of TiO2 existed in the oxidation state of Cu(II) while S in the form of S6+ species. And the codoped particles had higher surface area, smaller particle size, stronger spectral response in visible region compared with pure TiO2. The effects of doping amount in a wide range, catalyst dosage, and recycle on the photocatalytic activity of the codoped catalysts were investigated with Acid Orange 7 as the model compound under visible light illumination (λ > 447 nm). The results showed that S (2.0 %), Cu (5.0 %) codoped TiO2 had the highest visible light photocatalytic activity and good reusability performance. The kinetic study showed that this photocatalytic process coincided with the Langmuir–Hinshelwood pseudo first order reaction model. 相似文献
17.
Václav Štengl Jiří Henych Petr Vomáčka Michaela Slušná 《Photochemistry and photobiology》2013,89(5):1038-1046
The nanocomposites of titania coupled with graphene oxide (GO) and reduced graphene oxide (rGO), respectively, were prepared by homogeneous hydrolysis with urea. Graphene was obtained by effect of high‐intensity cavitation field on natural graphite in the presence of strong aprotic solvents in pressurized ultrasonic reactor. The morphology of TiO2–GO and TiO2–rGO composites was assessed by scanning electron microscopy and atomic force microscopy. The nitrogen adsorption–desorption was used for determination of surface area (BET) and porosity. Raman and IR spectroscopy were used for qualitative analysis and diffuse reflectance spectroscopy was employed to estimate band‐gap energies. Further enhancement of the photocatalytic activity was attained by codoping of composites with noble metals—Au, Pd and Pt. The photocatalytic activity of TiO2–GO and TiO2–rGO were assessed by photocatalytic decomposition of Orange II dye in an aqueous slurry under UV and visible light irradiation. The photocatalytic activity of noble metals codoped samples was determined with decomposition of Reactive Black 5 azo dye. 相似文献
18.
Xiaogang Sun Jun Xing Jingping Qiu 《Russian Journal of Physical Chemistry A, Focus on Chemistry》2016,90(6):1151-1156
A series of boron and sulfur co-doped titanium dioxide (TiO2) photocatalysts were prepared by a sol-gel method using boric acid, thiourea and tetrabutyl titanate [Ti(OC4H9)4] as precursors. The photoabsorbance of as-prepared photocatalysts was measured by UV–Vis diffuse reflectance spectroscopy (DRS), and its microstructure was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and N2 adsorption-desorption measurements. The prepared photocatalysts consisted of the anatase phase mainly in the form of spherical particles. The photocatalytic performance was studied by photodegradation of methyl blue (MB) in water under UV and visible light irradiation. The calcination temperature and the codoping content influenced the photoactivity. The synergistic effect of boron and sulfur co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of codoped TiO2 was also confirmed, the photocatalytic activity of TiO2 remained above 91% of that of the fresh sample after being used four times. It was shown that the co-doped TiO2 could be activated by visible light and could thus be potentially applied for the treatment of water contaminated by organic pollutants. 相似文献
19.
《Arabian Journal of Chemistry》2020,13(1):86-95
Cu and N-doped TiO2 photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO2 with particle sizes in the range of 9-17 nm. Analysis of N2 isotherm measurements showed that all investigated TiO2 samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO2 was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO2 were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO2 nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO2. The photocatalytic activity and photocurrent ability of TiO2 have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO2 > N-doped TiO2 > Cu-doped TiO2 > TiO2. COD result for (Cu, N)-codoped TiO2 reveals ∼92% mineralization of the MO dye on six h of visible light irradiation. 相似文献
20.
Xiaohui Yu Tingjun Hou Youyong Li Xuhui Sun Shuit‐Tong Lee 《International journal of quantum chemistry》2013,113(23):2546-2553
Doping is an efficient approach to narrow the band gap of TiO2 and enhance its photocatalytic activity. Here, we perform generalized gradient approximation (GGA)+U calculations to narrow the band gap of TiO2 by codoping of X (F, N) with transition metals (TM = Fe, Co) to extend the absorption edge to longer visible‐light wavelengths. Our results show that all the codoped systems can narrow the band gap significantly, in particular, (F+Fe)‐codoped system could serve as remarkably better photocatalysts with both narrowing of the band gap and relatively smaller formation energies than those of (F+Co) and (N+TM)‐codoped systems. Our results provide useful guidance for codoped TiO2 efficient for photocatalytic activity. © 2013 Wiley Periodicals, Inc. 相似文献