Adsorption study of alkyl-silicas and methylsiloxy-silicas.

We report the synthesis and adsorption study of the lyophobic porous silicas. Four adsorbents were prepared and tested: (1) octyl-silica, (2) hexadecyl-silica, (3) bis(trimethylsiloxy)-silica, and (4) oligo(dimethylsiloxane)-silica. Octyl- and hexadecyl-silicas were prepared via the reaction of silica with (CH3)2NSi(CH3)2CnH(2n+1) (n=8 and 16), the reactions were carried under the optimized conditions yielding high bonding densities of alkyl groups approximately 2.9-3.0 groups/nm2 and highly uniform non-polar adsorbents. Bis(trimethylsiloxy)-silica was prepared via the reaction silica with ClSi(CH3)2(CH2)10Si(CH3)[OSi(CH3)3]2. Oligo(dimethylsiloxane)-silica was prepared via the reaction of silica with ClSi(CH3)2-[OSi(CH3)2]2-Cl. Adsorption of small organic compounds (n-alkanes, alkylbenzene, benzene, diethyl ether) was investigated using two methods, classical static adsorption and gas chromatography. Thermodynamic parameters (heat, Gibbs energy, and entropy) of the adsorption of organic compounds were studied as a function of the nature of adsorbate and of the nature of the bonded layer as well. The results obtained suggest penetration of the adsorbate molecules into the bonded layer and the importance of this process in the retention mechanism in gas chromatography. Energy of the dispersion interactions with the surface decreases in the following order: n-C16H33(CH3)2Si- > n-C8H17(CH3)2Si- > [(CH3)3SiO]2Si(CH3)-(CH2)10(CH3)2Si- > -[[(CH3)2SiO]2]x-(CH3)2Si-. Energy of the electrostatic and hydrogen bonding interactions with the surface, as assessed from the adsorption of benzene and diethyl ether molecules, decreases in the opposite direction, indicating that alkyl-silicas are less polar adsorbents than methylsiloxy-silicas.     

三(三甲硅基)环戊二烯基三羰基钼负离子的反应性

三(三甲硅基)环戊二烯基三羰基钼负离子锂盐[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3]^-Li^+(1), 分别与MeI、phCH~2Cl及ClCH~2COOC~2H~5反应生成相应的烃基化钼衍生物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3R,] (R=-CH~3, 2; -CH~2ph, 3;-CH~2COOC~2H~5, 4)。1与PCl~3反应除得到预期的钼氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3Cl](5)外, 主要得到钼磷氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3PCl~2] 6; 1与碘反应得到钼碘化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3I] 7; 1与HOAc作用后分别和CCl~4、NBS室温反应, 仅分离到脱去一个Me~3Si的钼卤化物[{η^5-(Me~3Si)~2C~5H~2}Mo(CO)~3X], (X:Cl, 8; Br, 9)。     

Peripheral SH-functionalisation of carbosilane dendrimers including the synthesis of the model compound dimethylbis(propanethiol)silane and their interaction with rhodium complexes

Treatment of the allyl-containing compounds Me2Si(CH2CHCH2)2 and MeSi(CH2CHCH2)3 with thioacetic acid in the presence of AIBN gave Me2Si[(CH2)3SC(O)CH3]2 and MeSi[(CH2)3SC(O)CH3]3, respectively, which were reduced with LiAlH4 to the dithiols Me2Si[(CH2)3SH]2(3) and MeSi[(CH2)3SH]3(4). This protocol was applied to the first and second generations of the doubly and triply-branched carbosilane allyl dendrimers, Si[(CH2)3SiMe(CH2CHCH2)2]4(G(1)allyl-8), Si[(CH2)3SiMe{(CH2)3SiMe(CH2CHCH2)2}2]4(G(2)allyl-16), Si[(CH2)3Si(CH2CHCH2)3]4(G(1)allyl-12), and Si[(CH2)3Si{(CH2)3Si(CH2CHCH2)3}3]4(G(2)allyl-36) to give the corresponding SH functionalised surface dendrimers Si[(CH2)3SiMe(CH2CH2CH2SH)2]4(G(1)SH-8), G(2)SH-16, G(1)SH-12, and G(2)SH-36. Reactions of 3 with [M(acac)(diolefin)](M = Rh, Ir; diolefin = 1,5-cyclooctadiene, 2,5-norbornadiene) gave the compounds of the type [M2(mu-Me2Si[(CH2)3S]2)(diolefin)2]n. These diolefin complexes are octanuclear (n= 4) in solution while the complex [Rh2(mu-Me2Si[(CH2)3S]2)(cod)2]n(5) is tetranuclear in the solid state. The structure of 5, solved by X-ray diffraction methods, consists of a 20-membered metallomacrocycle formed by two dimethylbis(propylthiolate)silane moieties bridging four fragments Rh(cod) in a mu2 fashion through the sulfur atoms. Treatment of [Rh(acac)(CO)2] with 3 gave [Rh2(mu-Me2Si[(CH2)3S]2)(CO)4]n, which is a mixture of tetra (n= 2) and octanuclear (n= 4) complexes in a 2 : 1 ratio in solution, while the related complex [Rh2(mu-Me2Si[(CH2)3S]2)(CO)2(PPh3)2]2 is tetranuclear. Reactions of [Rh(acac)(L-L)](L-L = cod, (CO)2, (CO)(PPh3)) with 4 and the dendrimers G(1)SH-8, G(2)SH-16, and G(1)SH-12, gave microcrystalline solids of formulae [Rh3(MeSi[(CH2)3S]3)(L-L)3]n, [Si[(CH2)3SiMe{(CH2)3SRh(cod)}2]4]n([G(1)Rh(cod)-8]n), [Si[(CH2)3Si{(CH2)3SRh(cod)}3]4]n([G(1)Rh(cod)-12]n), etc., which presumably are tridimensional coordination polymers.     

Preparation and Reactions of Octasilsesquioxanes

Because of the length scales involved, nanocomposite materials incorporate extensive interracial interactions that can result in non-linear changes in the composite property. Chemists often start from polymerizable inorganic and organic constituents in the molecule to build organic/inorganic hybrids that combine advantageous properties of disparate components.Silsesquioxanes (RSiO1.5)n, derived from e.g. RSiCl3 or RSi(OEt)3 by hydrolysis/condensation in a sol-gel process, are a class of silicate framework where each Si-atom is linked covalently to an organic radical R that chemically modifies the silicates. In addition to incompletely condensed silsesquioxanes is the completely condensed octasilsesquioxane. These octameric silsesquioxanes are in transition between small molecules and macroscopic materials with skeletal frameworks found in crystalline forms of silica and zeolites. SisO12(CH=CH2)8 1 has a cubic silica like core and 8 olefin functionalities as known for a long time yet with very few reactivity reports. The acidic hydrolytic polycondensation of (vinyl)Si(OEt)3 in the literature, leading to only less than 20% of 1,also suggests a large room for improvement. We have found that the H NMR spectra of mixtures containing 1 and either the Schrock's catalyst or the Grubbs' catalyst never exhibit vinylic 1H peaks attributable to the formation of products from self-metathesis. With a Pt/C catalyst, the H-Si bond of HSiMe2Cl adds to the vinylic double bond of 1, forming 2 that reacts with sufficient CH2=CHCH2OH to give 3. Upon treatment of the Grubbs' catalyst, a ring-closing metathesis occurs on the surface of the cubic Si8O12 framework. The results exhibit a strong proximity effect with which 3 transforms itself to 4. Alternatively 5 has been prepared.The Gmbbs' catalyst allows 5 to isomerize from Z- to E-configuration to produce 4 independentiy, thus demonstrating the ring-closing metathesis reactions of densely populated terminal olefins on Si8O12 surface.     

Insertion reactions of alkynes and organic isocyanides into the palladium-carbon bond of dimetallic Fe-Pd alkoxysilyl complexes

Insertion of MeO(2)C-C[triple bond]C-CO(2)Me (DMAD) into the Pd-C bond of the heterodimetallic complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d(dmba-C)] (2) (dppm = Ph(2)PCH(2)PPh(2), dmba-C = metallated dimethylbenzylamine) and [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d(8-mq-C,N)] (3) (8-mq-C,N = cyclometallated 8-methylquinoline) yielded the sigma-alkenyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (7) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)[double bond, length as m-dash]C(CO(2)Me)(CH(2)C(9)H(6)N)}] (8), respectively. The latter afforded the adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(CH(2)C(9)H(6)N)}(CNBu(t))] (9) upon reaction with 1 equiv. of Bu(t)NC. The heterodinuclear sigma-butadienyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph=C(Ph)C(CO(2)Me)=(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (11) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph)=C(CO(2)Et)C(Ph)=C(CO(2)Et)(CH(2)C(9)H(6)N)}] (13) have been obtained by reaction of the metallate K[Fe{Si(OMe)(3)}(CO)(3)(dppm-P)] (dppm = Ph(2)PCH(2)PPh(2)) with [P[upper bond 1 start]dCl{C(Ph)=C(Ph)C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)N[upper bond 1 end]Me(2))}] or [P[upper bond 1 start]dCl{C(Ph)=C(CO(2)Et)C(Ph)=(CO(2)Et)}(CH(2)C(9)H(6)N[upper bond 1 end])], respectively. Monoinsertion of various organic isocyanides RNC into the Pd-C bond of 2 and 3 afforded the corresponding heterometallic iminoacyl complexes. In the case of complexes [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end][upper bond 1 start]d{C=(NR)(CH(2)C(9)H(6)N[upper bond 1 end])}] (15a R = Ph, 15b R = xylyl), a static six-membered C,N chelate is formed at the Pd centre, in contrast to the situation in [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=NR)(o-C(6)H(4)CH(2)NMe(2))}] (14a R = o-anisyl, 14b R = 2,6-xylyl) where formation of a mu-eta(2)-Si-O bridge is preferred over NMe(2) coordination. The outcome of the reaction of the dimetallic alkyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe] with RNC depends both on the stoichiometry and the electronic donor properties of the isocyanide employed for the migratory insertion process. In the case of o-anisylisocyanide, the iminoacyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=N-o-anisyl)Me}] (16) results from the reaction in a 1 : 1 ratio. Addition of three equiv. of o-anisylisocyanide affords the tris(insertion) product [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}] (18). After addition of a fourth equivalent of o-anisylNC, exclusive formation of the isocyanide adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}(CN-o-anisyl)] (19) was spectroscopically evidenced. In the complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-C(6)H(4)COCH(2))](2)Me}] (20), the sigma-bound diazabutadienyl unit is part of a 12-membered organic macrocyle which results from bis(insertion) of 1,2-bis(2-isocyanophenoxy)ethane into the Pd-Me bond of the precursor complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe]. In contrast, addition of two equivalents of tert-butylisocyanide to a solution of the latter afforded [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]Fe(mu-dppm)P[upper bond 1 end]d{C(=NBu(t))Me}(CNBu(t))] (21) in which both a terminal and an inserted isocyanide ligand are coordinated to the Pd centre. In all cases, there was no evidence for competing CO substitution at the Fe(CO)(3) fragment by RNC. The molecular structures of the insertion products 8 x CH(2)Cl(2) and 16 x CH(2)Cl(2) have been determined by X-ray diffraction.     

Design of heterogeneous catalysts via multiple active site positioning in organic-inorganic hybrid materials

Catalytic materials bearing multiple sulfonic acid functional groups and positioned at varying distances from one another on the surface of mesoporous solids are prepared to explore the effects that the spatial arrangement of active sites have on catalytic activity and selectivity. A series of organosiloxane precursors containing either disulfide or sulfonate ester functionalities (synthons of the eventual sulfonic acid groups) are synthesized. From these molecular precursors, a variety of organic-inorganic hybrid, mesostructured SBA-15 silica materials are prepared using a postsynthetic grafting procedure that leads to disulfide and sulfonate ester modified silicas: [Si]CH(2)CH(2)CH(2)SS-pyridyl, 2.SBA, [Si]CH(2)CH(2)CH(2)SSCH(2)CH(2)CH(2)[Si], 3.SBA, [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OCH(2)CH(3), 4.SBA, and [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OC(6)H(4)O(SO(2))(C(6)H(4))CH(2)CH(2)[Si], 6.SBA ([Si] = (tbd1;SiO)(x)()(RO)(3)(-)(x)()Si, where x = 1, 2). By subsequent chemical derivatization of the grafted species, thiol and sulfonic acid modified silicas are obtained. The materials are characterized by a variety of spectroscopic ((13)C and (29)Si CP MAS NMR, X-ray diffraction) and quantitative (TGA/DTA, elemental analysis, acid capacity titration) techniques. In all cases, the organic fragment of the precursor molecule is grafted onto the solid without measurable decomposition, and the precursors are, in general, attached to the surface of the mesoporous oxide by multiple siloxane bridges. The disulfide species 2.SBA and 3.SBA are reduced to the corresponding thiols 7.SBA and 8.SBA, respectively, and 4.SBA and 6.SBA are transformed to the aryl sulfonic acids 11.SBA and 12.SBA, respectively. 7.SBA and 8.SBA differ only in terms of the level of control of the spatial arrangement of the thiol groups. Both 7.SBA and 8.SBA are further modified by oxidation with hydrogen peroxide to produce the alkyl sulfonic acid modified materials 9.SBA and 10.SBA, respectively. The performances of the sulfonic acid containing SBA-15 silica materials (with the exception of 12.SBA) are tested as catalysts for the condensation reaction of phenol and acetone to bisphenol A. The alkyl sulfonic acid modified material 10.SBA derived from the cleavage and oxidation of the dipropyl disulfide modified material 3.SBA is more active than not only its monosite analogue 9.SBA, but also the presumably stronger acid aryl sulfonic acid material 11.SBA. It appears that a cooperative effect between two proximal functional groups may be operating in this reaction.     

Radical cage effects in the photochemical degradation of polymers: effect of radical size and mass on the cage recombination efficiency of radical cage pairs generated photochemically from the (CpCH2CH2N(CH3)C(O)(CH2)nCH3)2Mo2(CO)6 (n = 3, 8, 18) complexes

This study explored the effect of radical size, chain length, and mass on the cage recombination efficiency of photochemically generated radical cage pairs. Radical cage pairs containing long-chain radicals of the type [(CpCH(2)CH(2)N(CH(3))C(O)(CH(2))(n)CH(3))(CO)(3)Mo*, *Mo(CO)(3)(CpCH(2)CH(2)(CH(3))NC(O)(CH(2))(n)CH(3))] were generated in hexanes/squalane solution by photolysis (lambda = 546 nm) of the Mo-Mo bonds in (CpCH(2)CH(2)N(CH(3))C(O)(CH(2))(n)CH(3))(2)Mo(2)(CO)(6) (n = 3, 8, 18). The cage recombination efficiencies (denoted as F(cP), where F(cP) = k(cP)/(k(cP) + k(dP)), k(dP) is the diffusion rate constant, and k(cP) is the radical recombination rate constant) for the radical cage pairs were obtained by extracting them from quantum yield measurements for the photoreactions with CCl(4) (a metal-radical trap) as a function of solvent system viscosity. The results show that F(cP) increases as the length of the chain on a radical center increases. This finding likely provides at least one of the reasons why the quantum yields for photolytic polymer degradation (and long-chain molecules, in general) decrease as the polymer chains get longer. In quantitative terms, plots of k(dP)/k(cP) were linearly proportional to mass(1/2)/radius(2), in agreement with the prediction of Noyes' cage effect theory. The "radius" of a long-chain radical, such as those studied herein, is rather vague, and for that reason a less ambiguous structural parameter was sought to replace the r(2) term in the Noyes expression. Plots of k(dP)/k(cP) vs mass(1/2)/surface area suggest that surface area can be used in place of the radius(2) term in the Noyes expression. The significance of being able to use a particle's surface area in the Noyes expression is that the expression becomes useful for nonspherical particles. The new expression allows the approximate prediction of F(cP) values for radicals of different sizes and masses.     

Reaction of Cl atoms with C6F13CH2OH, C6F13CHO, and C3F7CHO

The Cl atom initiated oxidation of C(6)F(13)CH(2)OH, C(6)F(13)CHO, and C(3)F(7)CHO was investigated at 298 K and 1000 mbar pressure of air in a photoreactor using in situ Fourier transform infrared (FTIR) analysis. The rate coefficient for the reaction Cl + C(6)F(13)CH(2)OH (reaction 2) was measured using a relative method: k(2) = (6.5 +/- 0.8) x 10(-13) cm(3) molecule(-1) s(-1). C(6)F(13)CHO was detected as the major primary product, while CO and CF(2)O were found to be the major secondary products. A fitting procedure applied to the concentration-time profiles of C(6)F(13)CHO provided a production yield of (1.0 +/- 0.2) for this aldehyde in reaction 2, and the rate coefficient for the reaction Cl + C(6)F(13)CHO (reaction 4) was k(4) = (2.8 +/- 0.7) x 10(-12) cm(3) molecule(-1) s(-1). A high CO yield observed in the oxidation of C(6)F(13)CH(2)OH, (52 +/- 1)%, is attributed to the Cl atom initiated oxidation of C(6)F(13)CHO. High CO yields, (61 +/- 2)% and (85 +/- 5)%, were also measured in the Cl atom initiated oxidation of C(3)F(7)CHO in air and nitrogen, respectively. These high CO yields suggest the occurrence of a decomposition reaction of the perfluoroacyl, C(6)F(13)CO, and C(3)F(7)CO radicals to form CO which will compete with the combination reaction of these radicals with oxygen to form perfluoroacyl peroxy radicals in the presence of air. The latter radicals C(n)F(2)(n)(+1)CO(O)(2) (n = 6-12), through their reaction with HO(2) radicals, are currently considered as a possible source of persistent perfluorocarboxylic acids which have been detected in the environment. The consequences of the present results would be a reduction of the strength of this potential source of carboxylic acids in the atmosphere.     

Syntheses, derivatives, solubility, and interfacial properties of 2-methyl-2-polyfluoroalkenyloxymethyl-1,3-propanediols: potential building blocks for syntheses of amphiphatic macromolecules

2-Hydroxymethyl-2-methyl-1,3-propanediol (A) was reacted with (Me(3)Si)(2)NH and toluenesulfonyl chloride (TsCl) to give mainly CH(3)C(CH(2)OSiMe(3))(3) (1), and CH(3)C(CH(2)OTs)(3) (2), respectively. With allyl bromide, the products were CH(3)C(CH(2)OCH(2)CH[double bond]CH(2))(2)(CH(2)OH) (3) and CH(3)C(CH(2)OCH(2)CH[double bond]CH(2))(CH(2)OH)(2) x H(2)O (4). The reactions of 4 with perfluoroalkyl iodides (R(f)I) were catalyzed by Cu(I)Cl to form 2-methyl-2-polyfluoroalkenyloxymethyl-1,3-propanediols: (R(f)CH=CHCH(2)OCH(2))C(Me)(CH(2)OH)(2) [R(f) = C(4)F(9) (5), C(8)F(17) (6), and (CF(2)CF(2))(4)OCF(CF(3))(2) (7)]. Reduction of 5 and 6 with hydrogen gave two new 2-methyl-2-polyfluoroalkyloxymethyl-1,3-propanediols, 8 and 9. The sodium salt of 9 was reacted with allyl bromide or acetyl chloride to form (C(8)F(17)CH(2)CH(2)CH(2)OCH(2))C(Me)(CH(2)OX)(CH(2)OH)(2) [where X = CH(2)CH=CH(2) (10) or C(O)CH(3) (12)] and (C(8)F(17)CH(2)CH(2)CH(2)OCH(2))C(Me)(CH(2)OX)(2) [where X = CH(2)CH[double bond]CH(2) (11) or C(O)CH(3) (13)]. Reaction of tolenesulfonyl chloride with 7 gave the monotosylate, 14, as the sole product. With 4-trifluoromethylbenzyl bromide, the sodium salt of 4 gave (4-CF(3)C(6)H(4)CH(2)OCH(2))C(Me)(CH(2)CH[double bond]CH(2))(CH(2)OH) x H(2)O (15). The compounds were characterized by NMR ((1)H, (13)C, (19)F, (29)Si), GC-MS, and high-resolution MS or elemental analyses. UV evidence was obtained for partitioning of 9, 12, 14, and 15 between perfluorodecalin and n-octanol. The test compounds acted as surfactants by facilitating the solubility of phenol and Si(CH[double bond]CH(2))(4) in perfluorodecalin. The single-crystal X-ray structure of 8 was also obtained. It crystallized in the monoclinic space group P2(1)/c, and unit cell dimensions were a = 24.966(2) A (alpha = 90), b = 6.1371(6) A (beta = 100.730(2)), and c = 10.5669(10) A (gamma = 90).     

Fluorous biphasic catalysis: synthesis and characterization of copper(I) and copper(II) fluoroponytailed 1,4,7-Rf-TACN and 2,2'-Rf-bipyridine complexes--their catalytic activity in the oxidation of hydrocarbons,olefins, and alcohols,including mechanistic implications

In this contribution on fluorous biphasic catalysis (FBC), we present the synthesis and characterization of new copper complexes, and define their role, as precatalysts, in the FBC oxidation of hydrocarbons, olefins, and alcohols. Thus the previously reported, but poorly characterized, fluoroponytailed ligand, 2,2'-R(f)-bipyridine (R(f)=-(CH(2))(3)C(8)F(17)) 2, as well as the new Cu(II) fluoroponytailed carboxylate synthon complex [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)] 3, will be addressed. Moreover, the reaction of previously described ligands, 1,4,7-R(f)-TACN 1, or 2,2'-R(f)-bipyridine 2 with 3 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-tacn)] 4 and [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-bpy)] 5, respectively. The reaction of 1 with [Cu(CH(3)CN)(4)]PF(6) or [CuCl] provided new Cu(I) complexes, which could be isolated and fully characterized as [Cu(R(f)-tacn)X']X, in which X=PF(6) (6) or X'=Cl (7) (soluble in perfluoroheptane). The Cu(II) and Cu(I) complexes, 4-7, were characterized by elemental analysis, mass spectrometry, and IR, diffuse reflectance UV/Vis, and EPR spectroscopies; complex 7 was also characterized by (1)H and (19)F[(1)H] NMR spectroscopy. Complexes 4 and 5, as well as 6 and 7 generated in situ, were evaluated as precatalysts for hydrocarbon and olefin functionalization. The oxidation reactions of these substrates in the presence of the necessary oxidants, tert-butyl hydroperoxide (TBHP) and oxygen gas, proceeded under FBC conditions for 5, 7, and Cu(I) salts with 2. However, the complexes with ligand 2 could not be recycled, owing to significant ligand dissociation. The Cu(II) complex 4, with the ligand 1, provide the oxidation of 4-nitrobenzyl alcohol to 4-nitrobenzaldehyde under single-phase FBC conditions at 90 degrees C with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxy) and O(2); the precatalyst 4, can be utilized for an additional four catalytic cycles without loss of activity. Plausible mechanisms concerning these FBC oxidation reactions will be discussed.     

Characterization and reactions of previously elusive 17-electron cations: electrochemical oxidations of (C(6)H(6))Cr(CO)(3) and (C(5)H(5))Co(CO)(2) in the presence of [B(C(6)F(5))(4)](-)

The electrochemical oxidations of (C6H6)Cr(CO)3, 1, and (C5H5)Co(CO)2, 2, when carried out in CH2Cl2/[NBu4][B(C6F5)4], allow the physical or chemical characterization of the 17-electron cations 1+ and 2+ at room temperature. The generation of 1+ on a synthetic time scale permits an electrochemical "switch" process involving facile substitution of CO by PPh3 as a route to (C6H6)Cr(CO)2PPh3. The radical 2+ undergoes a second-order reaction to give a product assigned as the metal-metal bonded dimer dication [Cp2Co2(CO)4]2+. The new anodic chemistry of these often-studied 18-electron compounds is made possible by increases in the solubility and thermal stability of the cation radicals in media containing the poorly nucleophilic anion [B(C6F5)4]-, TFAB.     

Bimetallic effects in homopolymerization of styrene and copolymerization of ethylene and styrenic comonomers: scope, kinetics, and mechanism

This contribution describes the homopolymerization of styrene and the copolymerization of ethylene and styrenic comonomers mediated by the single-site bimetallic "constrained geometry catalysts" (CGCs), (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [EBICGC(TiMe2)2; Ti2], (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [EBICGC(ZrMe2)2; Zr2], (mu-CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [MBICGC(TiMe2)2; C1-Ti2], and (mu-CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [MBICGC(ZrMe2)2; C1-Zr2], in combination with the borate activator/cocatalyst Ph3C+ B(C6F5)4- (B1). Under identical styrene homopolymerization conditions, C1-Ti2 + B1 and Ti2 + B1 exhibit approximately 65 and approximately 35 times greater polymerization activities, respectively, than does monometallic [1-Me2Si(3-ethylindenyl)(tBuN)]TiMe2 (Ti1) + B1. C1-Zr2 + B1 and Zr2 + B1 exhibit approximately 8 and approximately 4 times greater polymerization activities, respectively, than does the monometallic control [1-Me2Si(3-ethylindenyl)(tBuN)]ZrMe2 (Zr1) + B1. NMR analyses show that the bimetallic catalysts suppress the regiochemical insertion selectivity exhibited by the monometallic analogues. In ethylene copolymerization, Ti2 + B1 enchains 15.4% more styrene (B), 28.9% more 4-methylstyrene (C), 45.4% more 4-fluorostyrene (D), 41.2% more 4-chlorostyrene (E), and 31.0% more 4-bromostyrene (F) than does Ti1 + B1. This observed bimetallic chemoselectivity effect follows the same general trend as the pi-electron density on the styrenic ipso carbon (D > E > F > C > B). Kinetic studies reveal that both Ti2 + B1 and Ti1 + B1-mediated ethylene-styrene copolymerizations follow second-order Markovian statistics and tend to be alternating. Moreover, calculated reactivity ratios indicate that Ti2 + B1 favors styrene insertion more than does Ti1 + B1. All the organozirconium complexes (C1-Zr2, Zr2, and Zr1) are found to be incompetent for ethylene-styrene copolymerization, yielding only mixtures of polyethylene and polystyrene. Model compound (mu-CH2CH2-3,3'){(eta(5)-indenyl)[1-Me2Si(tBuN)][Ti(CH2Ph)2]}2 {EBICGC[Ti(CH2Ph)2]2; Ti2(CH2Ph)4} was designed, synthesized, and structurally characterized. In situ activation studies with cocatalyst B(C6F5)3 suggest an eta(1)-coordination mode for the benzyl groups, thus supporting the proposed polymerization mechanism. For ethylene-styrene copolymerization, polar solvents are found to increase copolymerization activities and coproduce atactic polystyrene impurities in addition to ethylene-co-styrene, without diminishing the comonomer incorporation selectivity. Both homopolymerization and copolymerization results argue that substantial cooperative effects between catalytic sites are operative.     

"Heavy fluorous" cyclopentadienes and cyclopentadienyl complexes with three to five ponytails: facile syntheses from polybromocyclopentadienyl complexes, phase properties, and electronic effects

The reactions between [(eta5-C5H(5-x)Br(x))M(CO)3] (M = Re, Mn; x = 1, 3, 4, 5) and [IZn[(CH2)(n)R(f8)]] (n = 2, 3; R(f8) = (CF2)7CF3) in the presence of [Cl2PdL2] catalysts give the title complexes [[eta5-C5H(5-x)[(CH2)(n)R(f8)]x]M(CO)3]. In the case of x = 5, the major product is actually [[eta5-C5H[(CH2)(n)R(f8)]4]M(CO)3], in which one of the bromides has been substituted by hydride. Minor amounts of multiple hydride substitution products are formed, all of them readily separable on fluorous silica gel. Irradiation of the manganese complexes in CF3C6H5/MeOH/ether gives uncoordinated cyclopentadienes, which can be deprotonated and reattached to other metals. Partition coefficients have been measured (CF3C6F11/toluene): complexes with three or more ponytails are highly fluorophilic, with values of > 99.8: < 0.2. The IR [symbol: see text]CO bands have been used to probe the inductive effects of the ponytails at the metal centers.     

Alternating copolymerization of fluoroalkenes with carbon monoxide

The palladium-catalyzed alternating copolymerization of fluoroalkenes, represented as CH(2)=CH-CH(2)-C(n)F(2n+1), with CO was performed using (R,S)-BINAPHOS (2e) as a ligand. The CH(2)-C(n)F(2n+1) group is the most electronegative substituent ever reported for the copolymerization (Taft's sigma value of 0.90 for CH(2)CF(3)). The copolymer obtained from CH(2)=CH-CH(2)-C(8)F(17) (1a) existed as a mixture of polyspiroketal and polyketone, while that from CH(2)=CH-CH(2)-C(4)F(9) (1b) was a pure polyspiroketal, as was revealed by infrared and (13)C-CP/MAS NMR spectroscopies. The terminal structure of the polymer from 1b was confirmed by MALDI-TOF MS spectrometry. Detailed NMR studies suggested that the much higher reactivity with (R,S)-BINAPHOS (2e) than that with the conventional ligand DPPP (2a) can be attributed to the unique 1,2-insertion of the fluoroalkene into acylpalladium species. The existence of an electronegative substituent on the alpha-carbon of the palladium center is successfully avoided in the 1,2-insertion mechanism.     

Synthesis and Characterization of a New Alkenyldecaborane and Alkenyl Monocarbon Carboranes

Decaborane(14) reacts with 1-(CH(3))(3)SiC&tbd1;CC(4)H(9) in the presence of dimethyl sulfide to give the new alkenyldecaborane 5-(S(CH(3))(2))-6-[(CH(3))(3)Si(C(4)H(9))C=CH]B(10)H(11) (I). Crystal data for 5-(S(CH(3))(2))-6-[(CH(3))(3)Si(C(4)H(9))C=CH]B(10)H(11): space group P2(1)/n, monoclinic, a = 9.471(1) ?, b = 13.947(3) ?, c = 17.678(3) ?, beta = 100.32(1) degrees. A total of 3366 unique reflections were collected over the range 2.0 degrees /= 3sigma(F(o)(2)) and were used in the final refinement. R(F)() = 0.083; R(w)(F)() = 0.094. The single-crystal X-ray structure of 5-(S(CH(3))(2))-6-[((CH(3))(3)Si)(2)C=CH]B(10)H(11) (A) is also reported. Crystal data for 5-(S(CH(3))(2))-6-[((CH(3))(3)Si)(2)C=CH]B(10)H(11): space group, P2(1)2(1)2(1), orthorhombic, a = 9.059 (3) ?, b = 12.193(4) ?, c = 21.431(3) ?. A total of 4836 unique reflections were collected over the range 6 degrees /= 3sigma(F(o)(2)) and were used in the final refinement. R(F)() = 0.052; R(w)(F)() = 0.059. The reactions of 5-(S(CH(3))(2))6-[(CH(3))(3)Si(C(4)H(9))C=CH]B(10)H(11) and 5-(S(CH(3))(2))6-[((CH(3))(3)Si)(2)C=CH]B(10)H(11) with a variety of alkyl isocyanides were investigated. All of the alkenyl monocarbon carboranes reported are the result of incorporation of the carbon atom from the isocyanide into the alkenyldecaborane framework and reduction of N&tbd1;C bond to a N-C single bond. The characterization of these compounds is based on (1)H and (11)B NMR data, IR spectroscopy, and mass spectrometry.     

Rational design of original materials for the electrocatalytic hydrogenation reactions: concept, preparation, characterization, and theoretical analysis

Original and versatile new materials for the electrocatalytic hydrogenation of organic compounds were designed. The materials consist of reticulated glassy carbon cathode electrodes in which the modified silica particles (average diameter 40-63 microm) were dynamically circulated. The modification of the silica surface is 2-fold. First, the silica is surface-modified using organic functions such as -OSi(CH3)2(CH2)3OCH2CH-(OH)(CH)2OH (SiO2-Diol), -OSi(CH3)2(CH2)7CH3 (SiO2-C8), and -OSi(CH3)2C6H5 (SiO2-Phenyl). Second, these silica particles were further modified by vapor phase deposition of nickel nanoaggregates (used as sites for hydrogen atoms and electric contacts with the electrode material), which does not destroy or alter the organic functionalization as demonstrated by thermogravimetric analysis-mass spectrometry and Raman, diffuse reflectance IR Fourier transform, and Auger electron spectroscopies. The new concept stems from relative adsorption and desorption properties of the organic molecules and their corresponding reduced products into the organic functionalization of the surface-modified silica. In this work, the electrocatalytic hydrogenation cyclohexanone was used to test the concept. The performances (amount of cyclohexanol vs time of generated electrolysis at constant current) are measured and compared for the various bonded organic functions of the silica surface listed above, along with the unmodified silica particles (but still containing nickel nanoaggregates) and the presence or absence of methanol in solution. The measurements of the adsorption isotherms of cyclohexanone, and the calculations of the interaction energies (MM3 force field) between the chemisorbed organic functions and the substrates, corroborate perfectly the electrocatalysis results.     

Synthesis and Structure of an Enantiopure Dirhodium Loop with Unusual Axial Coordination

The crystals of enantiopure SS-[cis-Rh2(Ph2C6H4)2(O2CC2F4CO2)]2((CH3)2CHCH2NH2)3(1) were obtained from the reaction of S-[cis-Rh2(Ph2C6H4)2(CH3CN)6]BF4(S-2) and(Et4N)2(O2CC2F4CO2) in CH2Cl2/CH3OH under the presence of sec-butyl amine.Compound 1 crystallizes in orthorhombic,space group P212121 with a = 16.880(5),b = 28.728(9),c = 20.475(6) ,V = 9929(5) 3,Z = 4,C95H96Cl5F8N3O8.50P4Rh4,Mr = 2280.52,Dc = 1.526 g/cm3,F(000) = 4608 and μ(MoKα) = 0.922 mm-1.The final R = 0.0488 and wR = 0.1164 for 17204 observed reflections with I > 2σ(I) and R = 0.0814 and wR = 0.1374 for all data with absolute structure parameter =-0.04(3).Compound 1 contains two inherently chiral S-[cis-Rh2(Ph2C6H4)2] moieties which are connected by two(O2CC2F4CO2) dicarboxylate ligands in the equatorial positions.One of the dirhodium units with Rh-Rh distance of 2.5445(8)  is further coordinated by a sec-butyl amine in each axial position.Another dirohdium unit has only one axial sec-butyl amine ligand,and its Rh-Rh distance is 2.5079(9) .     

Structures of [(CO2)n(CH3OH)m](-) (n = 1-4, m = 1, 2) cluster anions

The infrared photodissociation spectra of [(CO 2) n (CH 3OH) m ] (-) ( n = 1-4, m = 1, 2) are measured in the 2700-3700 cm (-1) range. The observed spectra consist of an intense broad band characteristic of hydrogen-bonded OH stretching vibrations at approximately 3300 cm (-1) and congested vibrational bands around 2900 cm (-1). No photofragment signal is observed for [(CO 2) 1,2(CH 3OH) 1] (-) in the spectral range studied. Ab initio calculations are performed at the MP2/6-311++G** level to obtain structural information such as optimized structures, stabilization energies, and vibrational frequencies of [(CO 2) n (CH 3OH) m ] (-). Comparison between the experimental and the theoretical results reveals the structural properties of [(CO 2) n (CH 3OH) m ] (-): (1) the incorporated CH 3OH interacts directly with either CO 2 (-) or C 2O 4 (-) core by forming an O-HO linkage; (2) the introduction of CH 3OH promotes charge localization in the clusters via the hydrogen-bond formation, resulting in the predominance of CO 2 (-).(CH 3OH) m (CO 2) n-1 isomeric forms over C 2O 4 (-).(CH 3OH) m (CO 2) n-2 ; (3) the hydroxyl group of CH 3OH provides an additional solvation cite for neutral CO 2 molecules.     

不等链长的碳氟、碳氢正负离子表面活性剂混合体系的表面活性

研究了全氟辛酸钠与溴化十四烷基三甲铵混合水溶液的表面活性. 测定了不同比例混合物水溶液的表面张力-浓度曲线, 得出临界胶团浓度(cmc)及监 界胶团浓度时的溶液表面张力(γcmc)值. 应用Gibbs吸附公式及吸附层中两表面活性剂分子相互作用参数法求出表面总吸附量、吸附层组成及两表面活性剂分别吸附量等. 指示此吸附层具有多分子层性质. 这可能是碳氢、碳氟正负离子混合体系的特点.