Investigation of calcium antagonist–L-type calcium channel interactions by a vascular smooth muscle cell membrane chromatography method

The dissociation equilibrium constant (K _D) is an important affinity parameter for studying drug–receptor interactions. A vascular smooth muscle (VSM) cell membrane chromatography (CMC) method was developed for determination of the K _D values for calcium antagonist–L-type calcium channel (L-CC) interactions. VSM cells, by means of primary culture with rat thoracic aortas, were used for preparation of the cell membrane stationary phase in the VSM/CMC model. All measurements were performed with spectrophotometric detection (237 nm) at 37 °C. The K _D values obtained using frontal analysis were 3.36 × 10⁻⁶ M for nifedipine, 1.34 × 10⁻⁶ M for nimodipine, 6.83 × 10⁻⁷ M for nitrendipine, 1.23 × 10⁻⁷ M for nicardipine, 1.09 × 10⁻⁷ M for amlodipine, and 8.51 × 10⁻⁸ M for verapamil. This affinity rank order obtained from the VSM/CMC method had a strong positive correlation with that obtained from radioligand binding assay. The location of the binding region was examined by displacement experiments using nitrendipine as a mobile-phase additive. It was found that verapamil occupied a class of binding sites on L-CCs different from those occupied by nitrendipine. In addition, nicardipine, amlodipine, and nitrendipine had direct competition at a single common binding site. The studies showed that CMC can be applied to the investigation of drug–receptor interactions.     

Solid state voltammetric characterization of iron hexacyanoferrate encapsulated in silica

We describe a sol-gel approach by which iron hexacyanoferrate is immobilized in silica in a manner suited to investigation by electrochemistry in the absence of a contacting liquid phase. Such physicochemical parameters as concentration of redox sites (C _o) and apparent (effective) diffusion coefficient (D _app) are estimated by performing cyclic voltammetric and potential step experiments in two time regimes, which are characterized by linear and spherical diffusional patterns, respectively. Values of D _app and C _o thereby obtained are 2.0 × 10⁻⁶ cm² s⁻¹ and 1.4 × 10⁻² mol dm⁻³. The D _app value is larger than expected for a typical solid redox-conducting material. Analogous measurements done in iron(III) hexacyanoferrate(III) solutions of comparable concentrations, 1.0 × 10⁻² and 5.0 × 10⁻³ mol dm⁻³, yield D _app on the level of 5–6 × 10⁻⁶ cm² s⁻¹. Thus, the dynamics of charge propagation in this sol-gel material is almost as high as in the liquid phase. The residual water in the silica, along with the pore structure, are important to the overall mechanism of charge transport, which apparently is limited by physical diffusion rather than electron self-exchange. Under conditions of a solid state voltammetric experiment which utilizes an ultramicroelectrode, encapsulated iron hexacyanoferrate redox centers seem to be in the dispersed colloidal state rather than in a form of the rigid polymeric film. Received: 8 April 1999 / Accepted: 13 August 1999     

Justification for the colloid explanation of Liesegang ring formation

 The persuasive evidence for the role of colloid in the formation of Liesegang rings is nullified by the low diffusion constants (less than 2 × 10⁻¹¹ m² s⁻¹) of sol particles; however, those values were obtained for sols suspended in otherwise homogeneous solutions. The essential randomness of Brownian motion in such situations is absent in Liesegang experiments, where the large excess of outer electrolyte diffusing into the gel creates a bias in molecular bombardment resulting in sol particles moving a given distance in fewer steps, hence in a shorter time. From Einstein's equation (D=x ²/2t) values for D of 2–4 × 10⁻¹⁰ m² s⁻¹ have been calculated for Liesegang experiments in the literature. It is suggested that such values could well pertain to sol particles diffusing in the heterogeneous conditions existing in those experiments. Received: 13 April 1999 Accepted: 16 November 1999     

Pseudopotential study of lanthanum and lutetium dimers

Relativistic energy-consistent small-core lanthanide pseudopotentials of the Stuttgart–Bonn variety and extended valence basis sets have been used for the investigation of the dimers La₂ and Lu₂. It was found that the ground states for La₂ and Lu₂ are most likely ¹∑ _g ⁺ (σ _g ²π _u ⁴) and ³∑ _g ⁻ (4f ¹⁴4f ¹⁴σ _g ²σ _u ²π_u ²), respectively. The molecular constants including error bars were derived from multireference configuration interaction as well as coupled-cluster calculations, taking into account corrections for atomic spin–orbit splitting as well as possible basis set superposition errors. The theoretical values for La₂ (R _e=2.70±0.03 ?, D _e=2.31±0.13 eV, ω_e=186±13 cm⁻¹) show good agreement with the experimental binding energy (D _e=2.52±0.22 eV), but the experimental vibrational constant in an Ar matrix (ω_e=236±0.8 cm⁻¹) is significantly higher. For Lu₂ the theoretical values (R _e=3.07±0.03 ?, D _e=1.40±0.12 eV, ω_e=123±1 cm⁻¹) are in overall excellent agreement with experimental data (D _e=1.43±0.34 eV, ω_e=122± 1 cm⁻¹). The electronic structures of La₂ and Lu₂ are compared to those other lanthanide dimers and trends in the series are discussed. Received: 25 March 2002 / Accepted: 2 June 2002 / Published online: 21 August 2002     

The development of a rapid method for the isolation of four azaspiracids for use as reference materials for quantitative LC–MS–MS methods

The azaspiracids are a family of lipophilic polyether marine biotoxins that have caused a number of human intoxication incidents in Europe since 1995 after consumption of contaminated shellfish (Mytilus edulis). Levels of azaspiracids in shellfish for human consumption are monitored in accordance with EU guidelines: only shellfish with less than 160 μg kg⁻¹ are deemed safe. The limited availability of commercially available standards for azaspiracids is a serious problem, because validated LC–MS methods are required for routine analysis of these toxins in shellfish tissues. The procedure described herein has been used for the separation and the isolation of four azaspiracid (AZA) toxins from shellfish, for use as LC–MS–MS reference materials. Five separation steps have been used to isolate azaspiracids 1, 2, 3, and 6. The purity of the toxins obtained has been confirmed by multiple mass spectrometric methods using authentic azaspiracid standards. The same techniques have been used for quantification of the toxins extracted. The isolation procedure involves several chromatographic purification techniques: solid-phase extraction (diol sorbent, 90% mass reduction, and 95 ± 1% toxin recovery); Sephadex size-exclusion chromatography (87% mass reduction and up to 95 ± 2% toxin recovery), Toyopearl HW size-exclusion chromatography (90% mass reduction and up to 92.5 ± 2.5% toxin recovery), and semi-preparative LC (78 ± 3% toxin recovery). The procedure effectively separates the toxins from the sample matrix and furnishes azaspiracid toxins (AZA1, AZA2, AZA3 and AZA6) of sufficient purity with an average yield of 65% (n = 5). Triple-quadrupole mass spectrometry was used for qualitative and quantitative monitoring of the isolation efficiency after each stage of the process. High-resolution mass spectrometric evaluation of the toxic isolated material in both positive and negative modes suggests high purity.     

Oleic acid-assisted preparation of LiMnPO<Subscript>4</Subscript> and its improved electrochemical performance by Co doping

LiMnPO₄, with a particle size of 50–150 nm, was prepared by oleic acid-assisted solid-state reaction. The materials were characterized by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. The electrochemical properties of the materials were investigated by galvanostatic cycling. It was found that the introduction of oleic acid in the precursor led to smaller particle size and more homogeneous size distribution in the final products, resulting in improved electrochemical performance. The electrochemical performance of the sample could be further enhanced by Co doping. The mechanism for the improvement of the electrochemical performance was investigated by Li-ion chemical diffusion coefficient ( [(D)\tilde]_\textLi ) \left( {{{\tilde{D}}_{\text{Li}}}} \right) and electrochemical impedance spectroscopy measurements. The results revealed that the [(D)\tilde]_\textLi {\tilde{D}_{\text{Li}}} values of LiMnPO₄ measured by cyclic voltammetry method increase from 9.2 × 10⁻¹⁸ to 3.0 × 10⁻¹⁷ cm² s⁻¹ after Co doping, while the charge transfer resistance (R _ct) can be decreased by Co doping.     

Study of Micellar Behavior of SDS and CTAB in Aqueous Media Containing Furosemide—A Cardiovascular Drug

Sound velocity and density measurements of aqueous solutions of the anionic surfactant SDS (sodium dodecyl sulfate) and the cationic surfactant CTAB (cetyltrimethylammonium bromide) with the drug furosemide (0.002 and 0.02 mol⋅dm⁻³) have been carried out in the temperature range 20–40 °C. From these measurements, the compressibility coefficient (β), apparent molar volume (φ _v ) and apparent molar compressibility (φ _κ ) have been computed. From electrical conductivity measurements, the critical micelle concentrations (CMCs) of SDS and CTAB has been determined in the above aqueous furosemide solutions. From the CMC values as a function of temperature, various thermodynamic parameters have been evaluated: the standard enthalpy change (DH_m^o\Delta H_{\mathrm{m}}^{\mathrm{o}}), standard entropy change (DS_m^o\Delta S_{\mathrm{m}}^{\mathrm{o}}), and standard Gibbs energy change (DG_m^o\Delta G_{\mathrm{m}}^{\mathrm{o}}) for micellization. This work also included viscosity studies of aqueous solutions of SDS and CTAB with the drug in order to determine the relative viscosity (η _r). UV-Vis studies have also been carried for the ternary drug/surfactant/water system having SDS in the concentration range 0.002–0.014 mol⋅dm⁻³. All of these parameters are discussed in terms of drug–drug, drug–solvent and drug–surfactant interactions resulting from of various electrostatic and hydrophobic interactions.     

Thermodynamic Protonation Parameters of some Sulfur-Containing Anions in NaCl<Subscript>aq</Subscript> and (CH<Subscript>3</Subscript>)<Subscript>4</Subscript>NCl<Subscript>aq</Subscript> at <Emphasis Type="Italic">t</Emphasis>=25 °C

Protonation constants of one thiocarboxylate (thioacetate) and four sulfur-containing carboxylates (2-methylthioacetate, thiolactate, thiomalate, 3-mercaptopropionate) were determined by potentiometric measurements in a wide ionic strength range [0≤I≤5 mol⋅L⁻¹ in NaCl and 0 ≤I≤3 mol⋅L⁻¹ in (CH₃)₄NCl] at t=25 °C. For two of these ligands (2-methylthioacetate and thiolactate), the protonation enthalpies were also determined by calorimetric measurements in NaCl ionic medium [0 ≤I≤5 mol⋅L⁻¹] at t=25 °C. Individual UV spectra of the protonated and unprotonated 3-mercaptopropionate species, together with values of the protonation constants, were obtained by spectrophotometric titrations. Results were analyzed in terms of their dependence on the ionic medium by using different thermodynamic models [Debye-Hückel type, SIT (Specific ion Interaction Theory) and Pitzer’s equations]. Differences among protonation constants obtained in different media were also interpreted in terms of weak complex formation.     

Selective determination of uric acid in the presence of ascorbic acid using a penicillamine self-assembled gold electrode

The electrochemical behaviors of uric acid (UA) at the penicillamine (Pen) self-assembled monolayers modified gold electrode (Pen/Au) have been studied. The Pen/Au electrode is demonstrated to promote the electrochemical response of UA by cyclic voltammetry (CV). The diffusion coefficient D of UA is 6.97 × 10⁻⁶ cm² s⁻¹. In differential pulse voltammetric (DPV) measurements, the Pen/Au electrode can separate the UA and ascorbic acid (AA) oxidation potentials by about 120 mV and can be used for the selective determination of UA in the presence of AA. The detection limit was 1 × 10⁻⁶ mol L⁻¹. The modified electrode shows excellent sensitivity, good selectivity and antifouling properties.     

Screening of High-Affinity scFvs From a Ribosome Displayed Library Using BIAcore Biosensor

An experimental protocol was developed to screen high-affinity single-chain Fv antibody fragments (scFvs) from a Xanthomonas axonopodis pv. citri (Xac) immunized ribosome display library using BIAcore biosensor. The screening methods involved immobilizing antigen [lipopolysaccharides (LPS) of Xac] on sensor chip HPA and then unpurified expression products of scFvs flowing over the immobilized sensor chip. The affinity-improved scFvs were selected based on dissociation rate constants (k _d). Thirty-five enzyme-linked immunosorbent assay-positive scFvs were analyzed by BIAcore, and three of those (scFv A1, B2, and C5) with lower k _d were screened. To demonstrate the accuracy of the screening method, the three scFvs were expressed in Escherichia coli HB2151 and purified. The purified scFvs were subsequently further identified according to association rate and affinity constants. The results showed that the three scFvs (A1, B2, and C5) had high affinity for LPS of Xac (3.51 × 10⁻¹¹, 1.13 × 10⁻¹⁰, 5.06 × 10⁻¹⁰ M, respectively). Furthermore, the scFv B2 was highly specific for LPS of Xac and had no any cross-reactions with bovine serum albumin and LPS from Xac-related bacteria. This provided evidence that the information from the BIAcore screening assay could be accurate.     

Determination of molar absorptivity coefficients for major type-B trichothecenes and certification of calibrators for deoxynivalenol and nivalenol

This paper presents results from the European Commission-funded project Doncalibrant, the objective of which was to produce calibrators with certified mass fractions of the Fusarium toxins deoxynivalenol (DON), 3-acetyldeoxynivalenol (3-Ac-DON), 15-acetyldeoxynivalenol (15-Ac-DON), and nivalenol (NIV), in acetonitrile. The calibrators, available in ampoules, were sufficiently homogeneous, with between-bottle variations (s _bb) of less than 2%. Long-term stability studies performed at four different temperatures between −18 and 40 °C revealed no significant negative trends (at a confidence level of 95%). Molar absorptivity coefficients (in L mol⁻¹ cm⁻¹) were determined for all four toxins (DON: 6805 ± 126, NIV: 6955 ± 205, 3-Ac-DON: 6983 ± 141, 15-Ac-DON: 6935 ± 142) on the basis of a mini-interlaboratory exercise. The overall uncertainty of the calibrators’ target values for DON and NIV were evaluated on the basis of gravimetric preparation data and include uncertainty contributions from possible heterogeneity, storage, and transport. The Doncalibrant project resulted in the production of calibrators for DON (IRMM-315) and NIV (IRMM-316) in acetonitrile with certified mass fractions of 25.1 ± 1.2 μg g⁻¹ and 24.0 ± 1.1 μg g⁻¹, respectively. Both CRMs became commercially available from the Institute for Reference Materials and Measurements (IRMM, Geel, Belgium) at the beginning of 2007.     

Voltammetric sensor for nitrite determination based on its electrocatalytic reduction at the surface of p-duroquinone modified carbon paste electrode

A p-duroquinone (tetramethyl-p-benzoquinone) modified carbon paste electrode (DMCPE) was employed to study the electrocatalytic reduction of nitrite in aqueous solutions using cyclic voltammetry (CV), double potential-step chronoamperometry, and differential pulse voltammetry (DPV). It has found that under an optimum condition (pH 1.00), the reduction of nitrite at the surface of DMCPE occurs at a potential of about 660 mV less negative than that of an unmodified carbon paste electrode (CPE). The catalytic rate constant, k′_h, based on Andrieux and Saveant theoretical model was calculated as for scan rate 10 mV s^-1. Also, the apparent diffusion coefficient, D _app, was found as 2.5 × 10^–10 and 3.61 × 10^–5 cm² s^-1 for p-duroquinone in carbon paste matrix and nitrite in aqueous buffered solution, respectively. The values for αn_α were estimated to be −0.65 and −0.19 for the reduction of nitrite at the surface of DMCPE and CPE, respectively. The electrocatalytic reduction peak currents showed a linear dependence on the nitrite concentration, and a linear analytical curve was obtained in the ranges of 5.0 × 10^–5 M to 8.0 × 10^–3 M and 6.0 × 10^–6 M to 8.0 × 10^–4 M of nitrite concentration with CV and DPV methods, respectively. The detection limits (2σ) were determined as 2.5 × 10^–5 M and 4.3 × 10^–6 M by CV and DPV methods. This method was also applied as a simple, selective and precise method for determination of nitrite in real samples (the weak liquor from the wood and paper factory of Mazandaran province in Iran) by using a standard addition method.     

Isotopic fractionation of mercury induced by reduction and ethylation

Isotope ratio measurements characterizing ²⁰²Hg/²⁰⁰Hg in NIST SRM 3133 Mercury Standard Solution were undertaken by multicollector inductively coupled plasma mass spectrometry employing NIST SRM 997 Tl for mass bias correction by use of the slope and the intercept obtained from a natural logarithmic plot of each session of measurements of ²⁰²Hg/²⁰⁰Hg against ²⁰⁵Tl/²⁰³Tl. The calculated value of 1.285333 ± 0.000192 (mean and one standard deviation, n = 40) for the mass bias corrected ²⁰²Hg/²⁰⁰Hg was then used for mass bias correction of other Hg isotope pairs. Ratios of 0.015337 ± 0.000011, 1.68770 ± 0.00054, 2.3056 ± 0.0015, 1.3129 ± 0.0013, 2.9634 ± 0.0038, and 0.67937 ± 0.0013 (expanded uncertainty, k = 2) were obtained for ¹⁹⁶Hg/¹⁹⁸Hg, ¹⁹⁹Hg/¹⁹⁸Hg, ²⁰⁰Hg/¹⁹⁸Hg, ²⁰¹Hg/¹⁹⁸Hg, ²⁰²Hg/¹⁹⁸Hg, and ²⁰⁴Hg/¹⁹⁸Hg, respectively. Reduction of Hg(II) to Hg⁰ in solutions of SRM 3133 was then undertaken using SnCl₂, NaBH₄, UV photolysis in the presence of formic acid, and ethylation of Hg(II) using NaBEt_4. These reactions induced significant isotope fractionation with maximum values of 1.17 ± 0.07, 1.08 ± 0.09, 1.34 ± 0.07, and 3.59 ± 0.09‰ (one standard deviation, 1SD, n = 5) for δ ^202/198Hg relative to the initial isotopic composition in the solution following 85–90% reduction of the Hg by SnCl₂, NaBH₄, UV photolysis, and ethylation with NaBEt₄, respectively. Mass-dependent fractionation was found to be dominant for all reduction processes. Figure Mass dependence of fractionation for all samples from Hg fractionation experiments using NaBEt₄. Solid lines are the theoretically predicted MDF based on δ′ ^202/198 Hg using equation 7. Error bars displayed are one standard deviation of the mean of 5 measurements of each sample     

Nanomolar determination of hydrazine by TiO2 nanoparticles modified carbon paste electrode

In the present paper, the use of a novel carbon paste electrode modified by N,N′(2,3-dihydroxybenzylidene)-1,4-phenylene diamine (DHBPD) and TiO₂ nanoparticles prepared by a simple and rapid method for the determination of hydrazine (HZ) was described. In the first part of the work, cyclic voltammetry was used to investigate the redox properties of this modified electrode at various solution pH values and at various scan rates. A linear segment was found with a slope value of about 48 mV/pH in the pH range 2.0–12.0. The apparent charge transfer rate constant (k _s) and transfer coefficient (α) for electron transfer between DHBPD and TiO₂ nanoparticles-modified carbon paste electrode were calculated. In the second part of the work, the mediated oxidation of HZ at the modified electrode was described. It has been found that under optimum condition (pH 8.0) in cyclic voltammetry, a high decrease in overpotential occurs for oxidation of HZ at the modified electrode. The values of electron transfer coefficients (α) and diffusion coefficient (D) were calculated for HZ, using electrochemical approaches. Differential pulse voltammetry exhibited a linear dynamic range from 1.0 × 10⁻⁸ to 4.0 × 10⁻⁶ M and a detection limit (3σ) of 9.15 nM for HZ. Finally, this method was used for the determination of HZ in water samples, using standard addition method.     

Diffusion Coefficients for Binary, Ternary, and Polydisperse Solutions from Peak-Width Analysis of Taylor Dispersion Profiles

Binary mutual diffusion coefficients D can be estimated from the width at half height W _1/2 of Taylor dispersion profiles using D=(ln 2)r ² t _R/(3W ² h) and values of the retention time t _R and dispersion tube radius r. The generalized expression D _h=−(ln h)r ² t _R/(3W ² _h ) is derived to evaluate diffusion coefficients from peak widths W _h measured at other fractional heights (e.g., (h = 0.1, 0.2,…,0.9). Tests show that averaging the D _h values from binary profiles gives mutual diffusion coefficients that are as accurate and precise as those obtained by more elaborate nonlinear least-squares analysis. Dispersion profiles for ternary solutions usually consist of two superimposed pseudo-binary profiles. Consequently, D _h values for ternary profiles generally vary with the fractional peak height h. Ternary profiles with constant D _h values can however be constructed by taking appropriate linear combinations of profiles generated using different initial concentration differences. The invariant D _h values and corresponding initial concentration differences give the eigenvalues and eigenvectors for the evaluation of the ternary diffusion coefficient matrix. Dispersion profiles for polymer samples of N i-mers consist of N superimposed pseudo-binary profiles. The edges of these profiles are enriched in the heavier polymers owing to the decrease in polymer diffusion coefficients with increasing polymer molecular weight. The resulting drop in D _h with decreasing fractional peak height provides a signature of the polymer molecular weight distribution. These features are illustrated by measuring the dispersion of mixed polyethylene glycols.     

Electroanalytical and spectroscopic procedures for examination of interactions between double stranded DNA and intercalating drugs

A method is presented for the electroanalytical characterization of interactions of dsDNA with a drug, under conditions that both agents are dissolved in the phosphate buffer solution and both are electroactive. Normal pulse, square wave, differential pulse, and cyclic voltammetries were employed in the measurements of the drug and dsDNA oxidation signals at carbon electrodes. UV–Vis spectroscopy was used as a non-electrochemical method to support the electroanalytical data. An anticancer drug, C-1311 (5-diethylaminoethyl-amino-8-hydroxyimidazoacridinone), has been selected for the examination. Normal pulse voltammetry was particularly useful in showing that under the conditions employed neither dsDNA nor the drug were adsorbed at the electrode surface. Necessary conditions for the appearance of the well-defined dsDNA voltammetric signal (guanine peak) are: rigorous chemical and biological purity in the cell and appropriate purity of DNA. An analysis of the obtained results confirmed that there were two modes of interaction between C-1311 and dsDNA: by intercalation and electrostatically. In the presence of excess NaCl the electrostatic interactions deteriorate. The binding constants (K ₁ and K ₂, respectively) and the number (n) of nucleic base pairs (bp) and the number (m) of phosphate groups (pg) interacting with one molecule of drug have been determined. For strong interactions (intercalation) the values of the binding constant, K ₁, and the binding-site size, n, equal 3.7 × 10⁴ M⁻¹ and 2.1, respectively. For the weak electrostatic interactions the K ₂ and m parameters equal 0.28 × 10⁴ M⁻¹ and 4.7. The intercalation process is rather slow and its rate (the conditions of pseudo-first-order reaction) was estimated to equal 7 × 10⁻⁴ s⁻¹. The possibility of independent determination of both interacting agents was very useful in the study. Figure Intercalation of C-1311 into a dsDNA fragment     

D<Subscript>2</Subscript>O Isotope Effects on the Ionization of <Emphasis Type="Italic">β</Emphasis>-Naphthol and Boric Acid at Temperatures from 225 to 300 °C using UV-Visible Spectroscopy

The deuterium-isotope effects on the ionization constants of β-naphthol (2-naphthol) and boric acid, Δlog ₁₀ K=[log ₁₀ K _D2O−log ₁₀ K _H2O], have been determined from measurements in light and heavy water at temperatures from 225 °C≤t≤300 °C and pressures near steam saturation. β-Naphthol is a thermally-stable colorimetric pH indicator, whose ionization constant lies close to that of H₂PO₄⁻ (aq), the only acid for which Δlog ₁₀ K is accurately known at elevated temperatures. A newly designed platinum flow cell was used to measure UV-visible spectra of β-naphthol in acid, base, and buffer solutions of H₂PO₄⁻/HPO₄²⁻ and D₂PO₄⁻/DPO₄²⁻, from which the degree of ionization at known values of pH and pD was determined. Values of the ionization constants of β-naphthol in light and heavy water were calculated from these results, and used to derive a model for and over the experimental temperature range with an estimated precision of ±0.02 in log ₁₀ K. The new values of K _H2O and K _D2O allowed us to use β-naphthol as a colorimetric indicator, to measure the equilibrium pH and pD of the buffer solutions B(OH)₃/B(OH)₄⁻ and B(OD)₃/B(OD)₄⁻ up to 300 °C, from which the ionization constants of boric acid were calculated. The magnitude of the deuterium isotope effect for H₂PO₄⁻ (aq) is known to fall from Δlog ₁₀ K=−0.62 to Δlog ₁₀ K=−0.47, on the “aquamolal” concentration scale, as the temperature rises above 125 °C, but then remains almost constant. Although the temperature range is more limited, the new results for β-naphthol and boric acid appear to show a similar trend.     

Detection of cholera toxin in seafood using a ganglioside-liposome immunoassay

Microbiological contamination of foods continues to be a major concern in public health. Biological toxins are one class of important contaminants that can cause various human diseases. Outbreaks related to contamination by biological toxins or toxin-producing microorganisms have made it extremely important to develop rapid (approximately 20 min), sensitive and cost-effective analytical methods. This paper describes the development of a sensitive bioassay for the detection of cholera toxin (CT) in selected seafood samples, using ganglioside-incorporated liposomes. In this study, the assays were run with food samples spiked with various concentrations of CT. The limit of detection (LOD) increased by a factor of about 10–20 in most food samples, compared with the LOD in the buffer system previously reported. However, the LOD of toxins in food samples (8 × 10–3 × 10³ fg/mL for CT) was still comparable to, or lower than, that previously reported for other assays. The results from this study demonstrate that the bioassays using ganglioside-liposomes can detect the toxin directly in the field screening of food samples rapidly, simply and reliably, without the need for complex instrumentation.     

Binary chromatographic retention times from perturbations in flowrate and composition

This work is a theoretical and experimental investigation of the binary retention time (t _step) when the disturbance is made to a chromatographic system by adding a small flow of one of the pure components. The established theory is for addition of a pulse: in this case, the retention time (t _pulse) depends on the two binary isotherm gradients, and should be independent of the choice of pulse gas. From the column material balance, the value of t _step also depends on the column pressure drop and perturbation gas—the value of t _step should always be greater for the more-adsorbed component. The theory has been validated from results on the nitrogen–argon–5A zeolite system at 25, 54 and 81 °C. For a 50% mixture at 25 °C with a column pressure drop of 0.1 bar, the values of t _step are 257 and 254 seconds for the nitrogen and argon perturbations. The values of t _step are different because addition of the perturbation flow causes a very small increase in average column pressure (about 0.5 mbar), which causes the binary isotherm gradients to be measured in (slightly) different directions along the isotherm surface. The intention is to determine the value of t _step for the case of a zero change in the average column pressure: experimentally, this would require a column with a zero pressure drop. The material balance shows that t _step for a column with a zero pressure drop is obtained from a simple weighted function of the values of t _step for the two pure-component perturbations. Accurate determination is essential because the “zero pressure drop” values are used to determine binary adsorption isotherms which are, of course, at a fixed pressure.     

Electrochemical methods for simultaneous determination of trace amounts of dopamine and uric acid using a carbon paste electrode incorporated with multi-wall carbon nanotubes and modified with α-cyclodextrine

In this work, we investigate the electrochemical activity of dopamine (DA) and uric acid (UA) using both a bare and a modified carbon paste electrode as the working electrode, with a platinum wire as the counter electrode and a silver/silver chloride (Ag/AgCl) as the reference electrode. The modified carbon paste electrode consists of multi-walled carbon nanotubes (>95%) treated with α-cyclodextrine, resulting in an electrode that exhibits a significant catalytic effect toward the electro-chemical oxidation of DA in a 0.2-M Britton–Robinson buffer solution (pH 5.0). The peak current increases linearly with the DA concentration within the molar concentration ranges of 2.0 × 10⁻⁶ to 5.0 × 10⁻⁵ M and 5.0 × 10⁻⁵ to 1.9 × 10⁻⁴ M. The detection limit (signal to noise >3) for DA was found to be 1.34 × 10⁻⁷ M, respectively. In this work, voltammetric methods such as cyclic voltammetry, chronoamperometry, chronocuolometry, differential pulse and square wave voltammetry, and linear sweep and hydrodynamic voltammetry were used. Cyclic voltammetry was used to investigate the redox properties of the modified electrode at various scan rates. The diffusion coefficient (D, cm² s⁻¹ = 3.05 × 10⁻⁵) and the kinetic parameters such as the electron transfer coefficient (α = 0.51) and the rate constant (k, cm³ mol⁻¹ s⁻¹ = 1.8 × 10³) for DA were determined using electrochemical approaches. By using differential pulse voltammetry for simultaneous measurements, we obtained two peaks for DA and UA in the same solution, with the peak separation approximately 136 mV. The average recovery was measured at 102.45% for DA injection.