Formation of poly-p-phenylene thin films and their composites with fullerene by discrete evaporation in vacuum

The effect of parameters of discrete evaporation of poly-p-phenylene (PPP) and C₆₀ on quality of the films formed was studied, PPP and PPP/C₆₀ composite films and heterostructures based on these materials were prepared. It was established that the conjugation length of PPP macromolecules consists of –9–10 units, and they can be electrochemically transformed into the radical cation state at a potential of 2.10 V. Glassy carbon-PPP-C₆₀-Al heterostructures with a rectification ratio of 10⁶–10⁸ were formed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No, 12, pp, 2918–2921, December, 1996.     

Direct liquid chromatographic enantioseparation of sotalol and other β-blockers using an α1-acid glycoprotein-based chiral stationary phase

The behaviour of an α₁-acid glycoprotein-based chiral stationary phase (Chiral AGP) towards changes in pH and organic modifier in the mobile phase was investigated in order to deduce suitable conditions for the liquid chromatographic enantioseparation of a series of β-adrenoreceptor blocking drugs. The effects of the pH of the mobile phase on retention, selectivity and resolution were studied. Methanol was the only non-ionic modifier tested in the mobile phase while different aliphatic carboxylic acids (C₄ to C₈) and alkanesulfonic acids (C₆ to C₈) were used as ionic modifiers. The influence of the nature and concentration of these modifiers on retention and enantioselectivity was investigated. Under these conditions, enantiomeric separations could be obtained for more than 70% of the β-blocking agents examined. The use of heptanoic acid as an ionic additive in the mobile phase has permitted the resolution of sotalol enantiomers. An enantioselective assay for sotalol was then developed and validated.     

Properties of poly(p-phenylene)s and the perdeuterated analog

ESR data for poly(p-phenylene) (PPP) prepared from benzene and catalyst-oxidant systems were compared with data for PPP obtained by a variety of other methods. The results were similar, except for the Yamamoto preparation, and comparable to the spin densities for heterocyclic polymers of thiophene, pyrrole, and selenophene. Deuterated PPP from C₆D₆ showed significant differences in properties, in comparison to ordinary PPP, in relation to molecular weight, color, solubility, and spins/g in electron spin resonance (ESR). The implications are discussed with regard to the mechanism of benzene polymerization by AlCl₃-CuCl₂.     

Torsional isomerization of biologically active bicyclic molecules

Rotational isomerization of bipyridines C₅H₄N? C₅H₄N was studied by CNDO /2, PPP /CI , and CNDO /CI methods. It is shown that CNDO /2 overestimates the angle of rotation ? between the pyridine rings ca. two times. The angle ? was determined for 2,2′-bipyridine by means of correlation of the theoretical (CNDO /2) and experimental dipole moment. It was also found from the correlation between the theoretical and experimental UV spectra. It is shown that there is an explicit dependence of the results upon the distance between heteroatoms (PPP /CI ). It has been found that the CNDO /CI method correctly predicts the value of the rotational angles and their sequence in bipyridines.     

Comparison of octadecyl bonded titania phases

Summary The structure of a C₁₈ phase based on titania (C₁₈-A), synthesized by the method of solution polymerization, is investigated by diffuse reflectance infrared Fourier transform (DRIFT) and solid-state nuclear magnetic resonance (NMR) spectroscopy. The findings are compared with the results of a second C₁₈ phase based on titania (C₁₈-B) which was synthesized by the method of surface hydrosilation. The dynamic behavior of both phases is examined by¹H MAS NMR detection of spinlattice relaxation times in the rotating frame (T_1pH) and conventional spin-lattice relaxation times (T₁). Due to a smaller ligand density, phase C₁₈-A appears to be a somewhat more mobile than phase C₁₈-B. The chromatographic capability of the phase C₁₈-A is demonstrated by the separation of samples containing benzene derivates or anilines. The elution order is analogous to the phase C₁₈-B, but for both test mixtures the polarity of the mobile phase has to be increased. Phase C₁₈-A is classified as being polymeric by the Sander and Wise test, whereas phase C₁₈-B shows intermediate retention behavior.     

On the geometrical structure and UV spectrum of the truncated icosahedral C60, molecule

The PPP CI molecular-orbital theory for three-dimensional systems has been applied to study the UV spectrum of the truncated icosahedral C₆₀ molecule. We have found that only the one-electron transitions to T_1u symmetry (4.2270,4.7498 and 6.5182 eV) have oscillator strengths different from zero. Using a bond-order-bond-length relation in SCF iteration connected to the PPP method, we have obtained two kinds of bond lengths r₁ = 1.439 Å and r₂ = 1.398 Å, which correspond to the edges of the regular pentagon and the edge of a hexagon not lying on a pentagon.     

Effect of L64 on the Phase Behavior of 1-Dodecyl-3-methylimidazolium Chloride/Water System

Phase behavior of ternary system involving surfactant‐like ionic liquid 1‐dodecyl‐3‐methylimidazolium chloride ([C₁₂mim]Cl), water, and nonionic surfactant PEO‐PPO‐PEO block copolymer (Pluronic L64) is investigated at 25°C. Hexagonal (H₁) and lamellar liquid crystal phase (Lα) are found in [C₁₂mim]Cl/H₂O/L64 system by using polarized optical microscopy (POM), small‐angle X‐ray scattering (SAXS) techniques and ²H NMR spectra. The phase structure (H₁ phase), which is formed in [C₁₂mim]Cl/H₂O binary system, is not changed when L64 with a low concentration is added. However, phase transitions will occur from hexagonal to multiphases of H₁ and cubic phases (C), then to Lα+C phases with constant [C₁₂mim]Cl/H₂O ratio and increasing L64 concentration. Moreover, at given L64 (5%, 20%) concentration, the lattice parameter of H₁ or Lα phase decreases with increasing [C₁₂mim]Cl/H₂O ratio. Fourier transform infrared (FTIR) spectra indicate that the H‐bonded network comprising an imidazolium ring, chloride ion and water formed in [C₁₂mim]Cl/H₂O binary system is disrupted upon addition of L64. This is helpful to the phase transition, due to the decreasing of interfacial curvature induced by dehydration of hydrated layer after the addition of PEO block of L64.     

Hydrogen bonding in two solid phases of phenazine–chloranilic acid (1/1) determined at 170 and 93 K

The crystal structures in two solid phases, i.e. phase II stable between 146 and 253 K and phase IV below 136 K, of the title compound [phenazine–chloranilic acid (1/1), C₁₂H₈N₂·C₆H₂Cl₂O₄, in phase II, and phenazinium hydrogen chloranilate, C₁₂H₉N₂⁺·C₆HCl₂O₄⁻, in phase IV], have been determined. Both phases crystallize in P2₁, and each structure was refined as an inversion twin. In phase II, the phenazine and chloranilic acid mol­ecules are arranged alternately through two kinds of O—H⋯N hydrogen bonds. In phase IV, salt formation occurs by donation of one H atom from the chloranilic acid molecule to the phenazine mol­ecule; the resulting monocation and monoanion are linked by N—H⋯O and O—H⋯N hydrogen bonds.     

Morphology,Structure, and Dynamics of Pentacene Thin Films and Their Nanocomposites with [C2C1im][NTf2] and [C2C1im][OTF] Ionic Liquids

In this study, a homogeneous thin film growth of pentacene onto indium tin oxide (ITO) coated glass surfaces is explored using a high-resolution and reproducible vapor deposition methodology. Moreover, vacuum thermal evaporation of ionic liquids (ILs) ([C₂C₁im][NTf₂] and [C₂C₁im][OTF]) onto ITO, gold/palladium (AuPd) and pentacene surfaces were performed. A greater wettability behavior of ILs is observed for surfaces containing AuPd. Sequential and simultaneous depositions of ILs and pentacene were explored. Simultaneous depositions lead to the formation of nanocomposites films, consisting of IL micro- and nanodroplets covered by pentacene layers. Plasma surface treatment was used to induce the ILs droplets coalescence and explore the dynamics and phase separation of the nanocomposites. The [C₂C₁im][OTF] droplets were found to be completely covered with pentacene, which suggests a great affinity between cation-anion pairs and the aromatic moiety. Pentacene films and their nanocomposites with ILs exhibit a typical optical band gap of E_gap=1.77 eV, indicating that the nanocomposite phase domains are large enough to behavior as the bulk.     

Phosphido‐diphosphine pincer aluminum complexes as catalysts for ring opening polymerization of cyclic esters

New aluminum alkyl complexes, supported by o‐phenylene‐derived phosphido diphosphine pro‐ligands [Ph‐PPP]‐H and [ⁱPr‐PPP]‐H ([Ph‐PPP]‐H = bis(2‐diphenylphosphinophenyl)phosphine; [ⁱPr‐PPP]‐H = bis(2‐diisopropylphosphinophenyl)phosphine) are reported. Compounds [Ph‐PPP]AlMe₂ ( 1 ), [ⁱPr‐PPP]AlMe₂ ( 2 ), and [Ph‐PPP]AlⁱBu₂ ( 3 ) have been synthesized by reaction of the pro‐ligand with the appropriate trialkyl aluminum precursor and have been characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The solution NMR data and theoretical calculations suggest for all complexes trigonal bipyramidal structures with C_2v symmetry in which the phosphido diphosphine ligand acts as a κ³ coordinated ligand. All complexes promote the ring‐opening polymerization of ε‐caprolactone, L‐ and rac‐lactide. Polyesters with controlled molecular parameters (M_n, end groups) and low polydispersities are obtained. Upon addition of isopropanol, efficient binary catalytic systems for the immortal ring‐opening polymerization of the cyclic esters are produced. Preliminary investigations show the ability of these complexes to promote copolymerization of l ‐lactide and ?‐caprolactone to achieve copolymers whose microstructures are depending on the structure of the catalyst. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 49–60     

Multiple solutions of coupled-cluster equations for PPP model of [10]annulene

Multiple (real) solutions of the coupled-cluster (CC) equations (corresponding to the CCD, ACP and ACPQ methods) are studied for the Pariser–Parr–Pople (PPP) model of [10]annulene, C₁₀H₁₀. The long-range electrostatic interactions are represented either by the Mataga–Nishimoto potential, or Pople’s R⁻¹ potential. The multiple solutions are obtained in a quasi-random manner, by generating a pool of starting amplitudes and applying a standard CC iterative procedure combined with Pulay’s DIIS method. Several unexpected features of these solutions are uncovered, including the switching between two CCD solutions when moving between the weakly and strongly correlated regime of the PPP model with Pople’s potential.     

离子色谱法测定合成气制烯烃产物中的C_1~C_6有机酸

采用离子色谱建立了合成气制烯烃(SGTO)水相产物和油相产物中C1~C6有机酸的测定方法。对分离条件进行了优化,使用标准样品测定了线性范围和工作曲线,考察了方法的精密度和准确度,确定了SGTO油相产物样品的碱洗条件,并对SGTO水相产物和油相产物样品进行了测定。结果表明:C1~C6有机酸的质量浓度在各自配制的质量浓度范围内呈现良好的线性关系,相关系数均大于0.99。标准溶液的回收率测定表明回收率在95.6%~104.3%之间,5次重复测定的相对标准偏差(RSD)在0.4%~3.6%之间,表明该方法具有良好的准确性和精密度。SGTO油相产物中的加标回收率在91.1%~96.8%之间,5次重复测定的RSD为0.7%~2.3%,准确性可以满足实际分析的需要。实际SGTO水相产物和油相产物中C1~C6有机酸的分析结果表明,SGTO水相产物中C2~C4有机酸含量较高,而SGTO油相产物中C4~C6有机酸含量较高。本研究对SGTO反应研究、催化剂制备、工艺优化以及设备材料的选择具有重要意义。     

Triggering phase disengagement of 1-alkyl-3-methylimidazolium chloride ionic liquids by using inorganic and organic salts

This study deals with the influence of different inorganic and organic salts made up with sodium, potassium and ammonium cations to induce phase segregation in aqueous solutions of C₈C₁imCl and C₁₀C₁imCl at T = 298.15 K. The experimental solubility values are described by means of four empirical equations and the suitability of the models was analysed in the light of the standard deviation. The capability of the above mentioned salts to further phase de-mixing is discussed on the basis of their different molar Gibbs free energy of hydration (Δ_hydG), molar entropy of hydration (Δ_hydS) and pH. The efficiency of the separation was evaluated by determining the tie-lines, and these experimental values were fitted to three known models such as Bancroft, Othmer–Tobias and modified Setschenow equations.     

Separation of no-carrier-added 109Cd from natural silver target using RTIL 1-butyl-3-methylimidazolium hexafluorophosphate

The room temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆] has various applications in the separation of a range of metal ions replacing volatile and toxic traditional organic solvents in liquid–liquid extraction systems. In this study, the RTIL [C₄mim][PF₆] was used to separate no-carrier-added (NCA) ¹⁰⁹Cd from α-particle irradiated Ag target. A natural Ag foil was bombarded by 30 MeV α-particles to produce ¹⁰⁹Cd. After the decay of all co-produced short-lived products, NCA ¹⁰⁹Cd was separated from the bulk Ag using [C₄mim][PF₆] as extractant from HNO₃ medium. Ammoniumpyrrolidine dithiocarbamate (APDC) was used as a complexing agent. At the optimum condition, 3 M HNO₃, 0.01 M APDC in presence of [C₄mim][PF₆], ~99 % bulk Ag was extracted to the IL phase, leaving NCA ¹⁰⁹Cd in the aqueous phase. The amount of Ag became negligibly small after re-extraction in the same condition. The ionic liquid was recovered by washing it with 1 M HCl.     

25℃时KCl-RbCl-1/2-C3H7OH-H2O四元体系的液-液-固相平衡研究

本文研究了25℃时,K+,Rb+,//Cl-1/2C3H7OH,H2O两个四元体系的相平衡。测定了KCl＋RbCl＋H2O三元体系液-固相间的关系和KCl/RbCl不同质量比（1/0、0.75/0.25、0.5/0.5、0.25/0.75和0/1）在1/2-C3H7OH-H2O两种溶剂存在时的5组四元体系的液-液-固相关系。绘制出全相图。探讨了盐析效应,并采用一个五元参数方程对双液线数据进行了关联,此外采用一个经过修改Eisen-Joffe方程对结线数据和饱和平衡数据进行拟合,得到的结果令人满意。     

Neue Synthesen von 1α,25-Dihydroxycholesterin

New Syntheses of 1α,25-Dihydroxycholesterol Five convergent syntheses of 1α,25-dihydroxycholesterol (2) essentially achieved by combining 1α-hydroxylated C_21? and C_22?steroids with C_4? or C_5?side-chain building blocks, are described. The l,3-bis(tetrahydropyranyloxy)pregnen-21-ol-Ptoluenesulfonate (4) was used as a C_22?unit in three approaches involving sulfone 24 as a C_4?, sulfone 43 and 2-propynyl ether 49 as C_5?side-chain building blocks. In a further preparation, the 1,3-diacetoxypregnen-21 -al 5 and the phosphorane 59 , a C_22? and a C_5?unit, respectively, were connected. For the last one, the 1,3-bis(tetrahydropyranyloxy)pregnen-20-one (6) , a C_2l?unit and the C_5?phosphorane building block 66 were chosen. Furthermore, new routes for the preparation of the 3-hydroxy-27-norcholestenone (29) and of 25-hydroxycholesterol (3) are described for which the p-toluenesulfonates 21 and 23 served as the steroidal units and the sulfones 24 and 43 , respectively, as the side chain fragments. Finally, the 1,3-diacetoxypregnen-21-al (5) and the C5-phosphorane unit 60 gave a novel approach to 1α-hydroxycholesterol (53).     

Liquid crystal and solution phases of sodium dodecyl-p-benzene sulphonate (NaLAS) and octa-oxyethylene glycol hexadecyl ether (C16E8): 1:1 mixtures in water

The liquid crystals and other phases formed when the mixed surfactant system sodium dodecyl-p-benzene sulphonate (NaLAS) and octa-oxyethylene glycol hexadecyl ether (C₁₆E₈, 1:1 by weight) is dispersed in water have been investigated using optical microscopy, X-ray diffraction and differential scanning calorimetry. Despite the fact that neat LAS is a multi-phase solid and C₁₆E₈ is a crystalline solid, when the two are mixed at temperatures above the melting temperature of the C₁₆E₈ with no water present, what appears to be a metastable gel phase formed containing only a small volume fraction of un-dissolved LAS (ca. 5%). Moreover, when water is added to the system, the phase behaviour of the mixture considerably differs to that of either of the individual components. We report a detailed phase study on this mixture here particularly focussing on the ‘neat’ mixture. The phase behaviour when water is added is also discussed. Particularly interesting is the presence of a micellar phase between the hexagonal and lamellar phases thought to be due to weak interactions between micelles during the transition from rods to discs. In addition, the presence of a low temperature intermediate phase is discussed.     

Electro‐optical behavior of ferroelectric liquid crystalline polyphenylene derivatives

Liquid crystalline (LC) polyphenylene derivatives, such as poly(para‐phenylene) (PPP), poly(meta‐phenylene) (PMP), poly(meta‐biphenylene) (PBP), and poly (meta‐terphenylene) (PTP) derivatives, were synthesized through substitution of fluorine‐containing chiral LC groups into side chains, with an aim to develop ferroelectric LC (FLC) conjugated polymers. All the polymers, except PTP, showed enantiotropic liquid crystallinities, where several types of mesophases were observed in both heating and cooling processes. Among them, PPP and PMP derivatives showed chiral smectic C (S_C*) phases responsible for ferroelectricity. In fact, they exhibited quick response to electric field, in spite of high viscosities inherent to polymers, giving rise to switching times of less than 1 s between two S_C states with reversely directed alignment. Hysteresis loops between the polarization and electric field were also observed for PPP and PMP. The spontaneous polarization (P_S) of PMP remained unchanged even after the electric field became zero, affording the residual polarization (P_R) whose value was the same as that of P_S. This indicates that PMP has a prospective memory function based on FLC nature. The present study is the first report for realizing a quick switching in macroscopic alignment using electric field and also for generating a potential memory function in π‐conjugated polymers. It is elucidated that unusual polymer main chains such as polyphenylenes can be used to prepare new ferroelectric polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3591–3610, 2008     

Distribution coefficients in the water-dodecane system and the heats of adsorption of C<Subscript>1</Subscript>-C<Subscript>8</Subscript> alcohols on silica

Distribution coefficients in the water-dodecane system and the heats of adsorption of C₁-C₈ alcohols on silica (Silochrom S-80) were determined by gas chromatography. At low temperatures, C₁-C₄ alcohols were largely distributed in the aqueous phase, and C₆-C₉ alcohols were predominantly dissolved in the organic phase; C₅ alcohols had intermediate properties. Permittivity was found to correlate with log K _d, which allowed us to predict the character of the distribution of alcohols in the water-oil system. The heats and isotherms of adsorption were determined for the alcohols studied. The heats of adsorption of alcohols on silica monotonically increased in the series under consideration. For C₅-C₈ alcohols, they exceeded the heat of adsorption of water. The isotherms of adsorption were described by the Freundlich equation.     

Separation of C1-C5 aliphatic carboxylic acids on a highly sulfonated styrene-divinylbenzene copolymer resin column with a C6 aliphatic carboxylic acid solution as the mobile phase

Simultaneous separation of C₁-C₅ aliphatic carboxylic acids (formic, acetic, propionic, iso-butyric, butyric, iso-valeric and valeric acids) on a highly sulfonated styrene-divinylbenzene copolymer resin column (TSKgel SCX,  mm i.d.) was performed with C₆ aliphatic carboxylic acids (3-methyl-n-valeric, iso-caproic and caproic acids) solutions as the mobile phases. Using 0.05 mM sulfuric acid at pH 4.0 as the mobile phase, although good separation of these C₁-C₅ acids was achieved, peaks of the C₅ acids (iso-valeric and valeric acids) with large hydrophobicity tailed strongly. In contrast, using 1 mM C₆ acids at pH ca. 4.0 as the mobile phases, although vacant peaks corresponding to the C₆ acids in the mobile phase appeared, the peak shapes of the C₅ acids were improved greatly. Excellent simultaneous separation, symmetrical peaks and relatively high-sensitivity conductimetric detection for these C₁-C₅ acids were achieved on the TSKgel SCX column in 15 min with 1 mM iso-caproic acid at pH 4.0 as the mobile phase.