Two-Coordinate Copper(I)/NHC Complexes: Dual Emission Properties and Ultralong Room-Temperature Phosphorescence

As a kind of photoluminescent material, Cu^I complexes have many advantages such as adjustable emission, variable structures, and low cost, attracting attention in many fields. In this work, two novel two-coordinate Cu^I-N-heterocyclic carbene complexes were synthesized, and they exhibit unique dual emission properties, fluorescence and phosphorescence. The crystal structure, packing mode, and photophysical properties under different conditions were systematically studied, proving the emissive mechanism to be the locally excited state of the carbazole group. Based on this mechanism, ultralong room-temperature phosphorescence (RTP) with a lifetime of 140 ms is achieved by selective deuteration of the carbazole group. These results deepen the understanding of the luminescence mechanism and design strategy for two-coordinate Cu^I complexes, and prove their potential in applications as ultralong RTP materials.     

Long‐Lived Circularly Polarized Phosphorescence in Helicene‐NHC Rhenium(I) Complexes: The Influence of Helicene,Halogen, and Stereochemistry on Emission Properties

The first enantiopure chiral‐at‐rhenium complexes of the form fac‐ReX(CO)₃(:C^N) have been prepared, where :C^N is a helicene‐N‐heterocyclic carbene (NHC) ligand and X=Cl or I. These have complexes show strong changes in the emission characteristics, notably strongly enhanced phosphorescence lifetimes (reaching 0.7 ms) and increased circularly polarized emission (CPL) activity, as compared to their parent chiral models lacking the helicene unit. The halogen along with its position within the dissymmetric stereochemical environment strongly affect the photophysics of the complexes, particularly the phosphorescence quantum yield and lifetime. These results give fresh insight into fine tuning of photophysical and chiroptical properties of Re‐NHC systems.     

Stimulus‐Triggered Formation of an Anion–Cation Exciplex in Copper(I) Complexes as a Mechanism for Mechanochromic Phosphorescence

The investigation of the mechanisms of mechanochromic luminescence is of fundamental importance for the development of materials for photonic sensors, data storage, and luminescence switches. The structural origin of this phenomenon in phosphorescent molecular systems is rarely known and thus the formulation of structure–property relationships remains challenging. Changes in the M–M interactions have been proposed as the main mechanism with d¹⁰ coinage metal compounds. Herein, we describe a new mechanism—a mechanically induced reversible formation of a cation–anion exciplex based on Cu–F interactions—that leads to highly efficient mechanochromic phosphorescence and unusual large emission shifts from UV‐blue to yellow for Cu^I complexes. The low‐energy luminescence is thermo‐ and vaporesponsive, thus allowing the generation of white light as well as for recovering the original UV‐blue emission.     

A Two‐Coordinate Cyclic (Alkyl)(amino)silylene: Balancing Thermal Stability and Reactivity

A crystalline two‐coordinate cyclic (alkyl)(amino)silylene ( 1 ) was successfully synthesized and isolated. Its ²⁹Si NMR and UV/Vis spectra indicate that the electronic properties of 1 fall between those of cyclic dialkylsilylenes and diaminosilylenes. At very low temperature, the color of a solution of 1 turned from colorless to yellow, which was monitored by UV/Vis spectroscopy. DFT calculations supported the hypothesis that head‐to‐head dimers (disilenes) with a very long Si–Si distance are formed at such low temperatures. Although 1 is thermally stable, it readily undergoes cycloadditions, Si?H insertions, and photochemical reactions with benzene similar to dialkylsilylenes. At higher temperatures, 1 is also susceptible to intermolecular benzylic C?H insertion reactions, as well as unprecedented dehydrogenation reactions with cyclohexa‐1,4‐diene and 9,10‐dihydroanthracene to afford benzene and anthracene, respectively.     

Amorphous Pure Organic Polymers for Heavy‐Atom‐Free Efficient Room‐Temperature Phosphorescence Emission

Pure organic, heavy‐atom‐free room‐temperature phosphorescence (RTP) materials have attracted much attention and have potential applications in photoelectric and biochemical material fields owing to their rich excited state properties. They offer long luminescent lifetime, diversified design, and facile preparation. However, recent achievements of efficient phosphorescence under ambient conditions mainly focus on ordered crystal lattices or embedding into rigid matrices, which require strict growth conditions and have poor reproducibility. Herein, we developed a concise approach to give RTP with a decent quantum yield and ultralong phosphorescence lifetime in the amorphous state by radical binary copolymerization of acrylamide and different phosphors with oxygen‐containing functional groups. The cross‐linked hydrogen‐bonding networks between the polymeric chains immobilize phosphors to suppress non‐radiative transitions and provide a microenvironment to shield quenchers.     

9,9‐Dimethylxanthene Derivatives with Room‐Temperature Phosphorescence: Substituent Effects and Emissive Properties

Room‐temperature phosphorescence (RTP) emitters with ultralong lifetimes are emerging as attractive targets because of their potential applications in bioimaging, security, and other areas. But their development is limited by ambiguous mechanisms and poor understanding of the correlation of the molecular structure and RTP properties. Herein, different substituents on the 9,9‐dimethylxanthene core (XCO) result in compounds with RTP lifetimes ranging from 52 to 601 ms, which are tunable by intermolecular interactions and molecular configurations. XCO‐PiCl shows the most persistent RTP because of its reduced steric bulk and multiple sites of the 1‐chloro‐2‐methylpropan‐2‐yl (PiCl) moiety for forming intermolecular interactions in the aggregated state. The substituent effects reported provide an efficient molecular design of organic RTP materials and establishes relationships among molecular structures, intermolecular interactions, and RTP properties.     

Long-Lived Circularly Polarized Phosphorescence in Helicene-NHC Rhenium(I) Complexes: The Influence of Helicene,Halogen, and Stereochemistry on Emission Properties

The first enantiopure chiral-at-rhenium complexes of the form fac-ReX(CO)₃(:C^N) have been prepared, where :C^N is a helicene-N-heterocyclic carbene (NHC) ligand and X=Cl or I. These have complexes show strong changes in the emission characteristics, notably strongly enhanced phosphorescence lifetimes (reaching 0.7 ms) and increased circularly polarized emission (CPL) activity, as compared to their parent chiral models lacking the helicene unit. The halogen along with its position within the dissymmetric stereochemical environment strongly affect the photophysics of the complexes, particularly the phosphorescence quantum yield and lifetime. These results give fresh insight into fine tuning of photophysical and chiroptical properties of Re-NHC systems.     

Aggregation‐Induced Emission with Long‐Lived Room‐Temperature Phosphorescence from Methylene‐Linked Organic Donor–Acceptor Structures

Aggregation‐caused quenching (ACQ), where excited‐state and/or ground‐state electronic structures are altered to exhibit an increased proclivity for non‐radiative decay for the aggregates, is largely responsible for the lack of fluorescence and phosphorescence in molecular solids in general. Here we show that ACQ could be effectively circumvented by constructing an aromatic system with a methylene‐linker, where the system exhibits typical aggregation‐induced emission (AIE) with long‐lived room‐temperature phosphorescence, since the tetrahedral structure in the solid state may significantly reduce strong intermolecular interactions contributing to ACQ.     

Aggregation‐Induced Emission Properties of Copper Iodide Clusters

The aggregation‐induced emission (AIE) properties of two different copper iodide clusters have been studied. These two [Cu₄I₄L₄] clusters differ by their coordinated phosphine ligand and the luminescent mechanochromic properties are only displayed by one of them. The two clusters are AIE‐active luminophors that exhibit an intense emission in the visible region upon aggregation. The formed particles present luminescent thermochromism comparable to that of the bulk compounds. The observed AIE properties can be attributed to suppression of nonradiative relaxation of the excited states in a more rigid state, in relation to the large structural relaxation of the excited triplet state. The differences observed in the AIE properties of the two clusters can be related to the different ligands. A correlation between the luminescence mechanochromic properties and the AIE effect is not straightforward, but the formation of “soft” molecular solids is a common characteristic that can explain the photoactive properties of these compounds.     

Stimuli‐Responsive Circularly Polarized Organic Ultralong Room Temperature Phosphorescence

Purely organic materials showing room temperature phosphorescence (RTP) and ultralong RTP (OURTP) have recently attracted much attention. However, it is challenging to integrate circularly polarized luminescence (CPL) into RTP/OURTP. Here, we show a strategy to realize CPL‐active OURTP (CP‐OURTP) by binding an achiral phosphor group directly to the chiral center of an ester chain. Engineering of this flexible chiral chain enables efficient chirality transfer to carbazole aggregates, resulting in strong CP‐OURTP with a lifetime of over 0.6 s and dissymmetry factor of 2.3×10^?3 after the conformation regulation upon photo‐activation. The realized CP‐OURTP is thus stable at room temperature but can be deactivated quickly at 50 °C to CP‐RTP with high CPL stability during the photo‐activation/thermal‐deactivation cycles. Based on this extraordinary photo/thermal‐responsive and highly reversible CP‐OURTP/RTP, a CPL‐featured lifetime‐encrypted combinational logic device has been successfully established.     

Low‐Temperature N2 Binding to Two‐Coordinate L2Fe0 Enables Reductive Trapping of L2FeN2− and NH3 Generation

The two‐coordinate [(CAAC)₂Fe] complex [CAAC=cyclic (alkyl)(amino)carbene] binds dinitrogen at low temperature (T2 complex, [(CAAC)₂Fe(N₂)], was trapped by one‐electron reduction to its corresponding anion [(CAAC)₂FeN₂]^? at low temperature. This complex was structurally characterized and features an activated dinitrogen unit which can be silylated at the β‐nitrogen atom. The redox‐linked complexes [(CAAC)₂Fe^I][BAr^F₄], [(CAAC)₂Fe⁰], and [(CAAC)₂Fe^?IN₂]^? were all found to be active for the reduction of dinitrogen to ammonia upon treatment with KC₈ and HBAr^F₄?2 Et₂O at ?95 °C [up to (3.4±1.0) equivalents of ammonia per Fe center]. The N₂ reduction activity is highly temperature dependent, with significant N₂ reduction to NH₃ only occurring below ?78 °C. This reactivity profile tracks with the low temperatures needed for N₂ binding and an otherwise unavailable electron‐transfer step to generate reactive [(CAAC)₂FeN₂]^?.     

A Two‐Coordinate Cobalt(II) Imido Complex with NHC Ligation: Synthesis,Structure, and Reactivity

The synthesis, structural characterization, and reactivity of the first two‐coordinate cobalt complex featuring a metal–element multiple bond [(IPr)Co(NDmp)] ( 4 ; IPr=1,3‐bis(2′,6′‐diisopropylphenyl)imidazole‐2‐ylidene; Dmp=2,6‐dimesitylphenyl) is reported. Complex 4 was prepared from the reaction of [(IPr)Co(η²‐vtms)₂] (vtms=vinyltrimethylsilane) with DmpN₃. An X‐ray diffraction study revealed its linear C? Co? N core and a short Co? N distance (1.691(6) Å). Spectroscopic characterization and calculation studies indicated the high‐spin nature of 4 and the multiple‐bond character of the Co? N bond. Complex 4 effected group‐transfer reactions to CO and ethylene to form isocyanide and imine, respectively. It also facilitated E? H (E=C, Si) σ‐bond activation of terminal alkyne and hydrosilanes to produce the corresponding cobalt(II) alkynyl and cobalt(II) hydride complexes as 1,2‐addition products.     

Bismesitoylphosphinic Acid (BAPO‐OH): A Ligand for Copper Complexes and Four‐Electron Photoreductant for the Preparation of Copper Nanomaterials

Bismesitoylphosphinic acid, (HO)PO(COMes)₂ (BAPO‐OH), is an efficient photoinitiator for free‐radical polymerizations of olefins in aqueous phase. Described here are the structures of various copper(II) and copper(I) complexes with BAPO‐OH as the ligand. The complex Cu^II(BAPO‐O)₂(H₂O)₂ is photoactive, and under irradiation with UV light in aqueous phase, it serves as a source of metallic copper in high purity and yield (>80 %). Simultaneously, the radical polymerization of acrylates can be initiated and allows the preparation of nanoparticle/polymer nanocomposites in which the metallic Cu nanoparticles are protected against oxidation. The determination of the stoichiometry of the photoreductions suggests an almost quantitative conversion from Cu^II into Cu⁰ with half an equivalent of BAPO‐OH, which serves as a four‐electron photoreductant.     

Air‐Stable (CAAC)CuCl and (CAAC)CuBH4 Complexes as Catalysts for the Hydrolytic Dehydrogenation of BH3NH3

The first stable copper borohydride complex [(CAAC)CuBH₄] [CAAC=cyclic(alkyl)(amino)carbene] bearing a single monodentate ligand was prepared by addition of NaBH₄ or BH₃NH₃ to the corresponding [(CAAC)CuCl] complex. Both complexes are air‐stable and promote the catalytic hydrolytic dehydrogenation of ammonia borane. The amount of hydrogen released reaches 2.8 H₂/BH₃NH₃ with a turnover frequency of 8400 mol mol_cat^?1 h^?1 at 25 °C. In a fifteen‐cycle experiment, the catalyst was reused without any loss of efficiency.     

Polymorphic Pure Organic Luminogens with Through‐Space Conjugation and Persistent Room‐Temperature Phosphorescence

Pure organic luminogens with persistent room‐temperature phosphorescence (p‐RTP) have attracted increasing attention owing to their vital significance and potential applications in security inks, bioimaging, and photodynamic therapy. Previously reported p‐RTP luminogens normally possessed through‐bond conjugation. In this work, we report a pure organic luminogen, AN‐MA, the Diels–Alder cycloaddition adduct of anthracene (AN) and maleic anhydride (MA), which possesses isolated phenyl groups and an anhydride moiety. AN‐MA exhibits aggregation‐enhanced emission (AEE) characteristics with efficiency of approximately 2 % and up to 8.5 % in solution and crystals, respectively. Two polymorphs of AN‐MA were readily obtained that were able to generate UV emission from individual phenyl rings together with bright blue emission owing to the effective through‐space conjugation. Moreover, p‐RTP with a lifetime of up to approximately 1.6 s was obtained in the crystals. These results not only reveal a new system with both fluorescence and RTP dual emission but also suggest an alternative through‐space conjugation strategy towards pure organic p‐RTP luminogens with tunable emissions.     

Designing Efficient and Ultralong Pure Organic Room‐Temperature Phosphorescent Materials by Structural Isomerism

Pure organic materials with ultralong room‐temperature phosphorescence (RTP) are attractive alternatives to inorganic phosphors. However, they generally show inefficient intersystem crossing (ISC) owing to weak spin–orbit coupling (SOC). A design principle based on the realization of small energy gap between the lowest singlet and triplet states (ΔE_ST) and pure ππ* configuration of the lowest triplet state (T₁) via structural isomerism was used to obtain efficient and ultralong RTP materials. The meta isomer of carbazole‐substituted methyl benzoate exhibits an ultralong lifetime of 795.0 ms with a quantum yield of 2.1 %. Study of the structure–property relationship shows that the varied steric and conjugation effects imposed by ester substituent at different positions are responsible for the small ΔE_ST and pure ππ* configuration of T₁.     

Cationic,Two‐Coordinate Gold π Complexes

Cationic, two‐coordinate gold π complexes that contain a phosphine or N‐heterocyclic supporting ligand have attracted considerable attention recently owing to the potential relevance of these species as intermediates in the gold‐catalyzed functionalization of C? C multiple bonds. Although neutral two‐coordinate gold π complexes have been known for over 40 years, examples of the cationic two‐coordinate gold(I) π complexes germane to catalysis remained undocumented prior to 2006. This situation has changed dramatically in recent years and well‐defined examples of two‐coordinate, cationic gold π complexes containing alkene, alkyne, diene, allene, and enol ether ligands have been documented. This Minireview highlights this recent work with a focus on the structure, bonding, and ligand exchange behavior of these complexes.     

Long Afterglow Room‐Temperature Phosphorescence from Nanopebbles: A Urea Pyrolysis Product

Materials having long afterglow are highly sought after for various applications such as light‐emitting diodes, security signs and bioimaging. Herein, we report a simple, low‐cost synthesis of a purely organic room‐temperature phosphorescent nanomaterial with a pebble‐like structure by heating urea, a biocompatible and easily available precursor, at 200 °C with a high phosphorescence lifetime of 1.0365 s and a visible afterglow for up to 10 s. This urea derived phosphorescent nanocomposite (UPNC) can be mixed with commercially available acrylic paint base and common gum, which can be readily used as a phosphorescent pigment.     

Yellow Circularly Polarized Luminescence from C1‐Symmetrical Copper(I) Complexes

The synthesis of chiral C₁‐symmetrical copper(I) complexes supported by chiral carbene ligands is described. These complexes are yellow emitters with modest quantum yields. Circularly polarized luminescence (CPL) spectra show a polarized emission band with dissymmetry factors |g_lum|=1.2×10^?3. These complexes are the first reported examples of molecular copper(I) complexes exhibiting circularly polarized luminescence. In contrast with most CPL‐emitting molecules, which possess either helical or axial chirality, the results presented show that simple chiral architectures are suitable for CPL emission and unlock new synthetic possibilities.