Reduction of NO adlayers on Pt(110) and Pt(111) in acidic media: evidence for adsorption site-specific reduction

We present a combined in situ Fourier transform infrared reflection-absorption spectroscopy and voltammetric study of the reduction of saturated and subsaturated NO adlayers on Pt(111) and Pt(110) single-crystal surfaces in acidic media. The stripping voltammetry experiments and the associated evolution of infrared spectra indicate that different features (peaks) observed in the voltammetric profile for the electrochemical reduction of NO adlayers on the surfaces considered are related to the reduction of NO(ads) at different adsorption sites and not to different (consecutive) processes. More specifically, reduction of high- and intermediate-coverage (ca. 0.5-1 monolayers (ML)) NO adlayers on Pt(110) is accompanied by site switching from atop to bridge position, in agreement with the ultra-high-vacuum data. On Pt(111) linearly bonded (atop) NO and face-centered cubic 3-fold-hollow NO species coexist at high coverages (0.25-0.5 ML) and can be reduced consecutively and independently. On Pt(111) and Pt(110) electrodes, linearly bonded NO species are more reactive than multifold-bonded NO species. Both spectroscopic and voltammetric data indicate that ammonia is the main product of NO(ads) reduction on the two surfaces examined.     

Underpotential deposition of hydrogen on benzene-modified Pt(111) in aqueous H2SO4

The Pt(111) electrode is modified by an overlayer of C6H6 (ads) upon its cycling in the 0.05-0.80 V range in aq H2SO4 + 1 mM C6H6. The C6H6 (ads) overlayer significantly changes the underpotential-deposited H (H(UPD)) and anion adsorption, and cyclic-voltammetry (CV) profiles show a sharp cathodic peak and an asymmetric anodic one in the 0.05-0.80 V potential range. The C6H6 (ads) layer blocks the (bi)sulfate adsorption but facilitates the adsorption of one monolayer of H(UPD). Cycling of the benzene-modified Pt(111) in benzene-free aq 0.05 H2SO4 from 0.05 to 0.80 V results in a partial desorption of C6H6 (ads) and in a partial recovery of the CV profile characteristic of an unmodified Pt(111). The peak potential of the cathodic and anodic feature is independent of the scan rate, s (10 < or = s < or = 100 mV s(-1)), and the peak current density increases linearly with an increase of the scan rate. Temperature variation modifies the peak potential and current density but does not affect the charge density of the cathodic or anodic feature. Temperature-dependent studies allow us to determine the thermodynamic state function for the H(UPD) adsorption and desorption. Delta G degrees(ads)(H(UPD))assumes values from -4 to -12 kJ mol(-1), while has values from 9 to 14 kJ mol(-1). The values of delta Delta G degrees (delta Delta G degrees = delat Delta G degrees(ads) + delta Delta D degrees(des)) decrease almost linearly from 6 kJ mol(-1) at theta(H(UPD) --> 0 to 0 kJ mol(-1) at theta(H(UPD) --> 1. The nonzero values of delta Delta G degrees testify that the adsorbing and desorbing H(UPD) adatoms interact with an energetically different substrate. The lateral interactions changed from repulsive (omega = 29 kJ mol(-1) at theta(H(UPD) --> 0) to attractive (omega = -28 kJ mol(-1) at theta(H(UPD) --> 1) as the H(UPD) coverage increases. The values of delta S degrees(ads)(H(UPD)) increase from 19 to 56 J K(-1) mol(-1), while those of delta S degrees(des)(H(UPD)) decrease from 45 to -30 J K(-1) mol(-1) with an increase of H(UPD) coverage. The values of delta H degrees(des)(H(UPD)) and delta H degrees(des)(H(UPD)) vary from 0 to 27 kJ mol(-1). The Pt(111)-H(UPD) surface bond energy at the benzene-modified Pt(111) electrode falls in the 191-218 kJ mol(-1) range and is weaker than in the case of the unmodified Pt(111) electrode in the same electrolyte.     

Insights into electrocatalysis

When standard reversible potentials for bulk solution reactions, U(0), are known, the reversible potentials when the reactant and product are adsorbed on an electrocatalyst surface, U(surf)(rev), are given in terms of these potentials and the adsorption Gibbs energy bond strengths: U(surf)(rev) = U0 + D(ads)G (Ox)/F-Δ(ads)G (R)/F (i). When the Δ(ads)G (Ox) and Δ(ads)G (Red) values are known at potential U, this equation is exact. When the overpotential for a multi-electron transfer reaction is minimal, each electron transfer takes place at the standard reversible potential for the overall reaction. In the case of O(2) reduction to water via the intermediate step OOH(aq) → O(aq) + OH(aq), or via O(2)(g) → 2O(aq), the respective endergonic O-O dissociation Gibbs energies are shown to be 2.52 eV and 4.76 eV. When the oxygen product and water reactant adsorb weakly, as on platinum, the adsorption Gibbs energies, Δ(ads)G, for O, OH, and OOH intermediates can be uniquely predicted using these data. All of the above depend exclusively on experimentally determined data. Reversible potentials have been calculated for oxygen reduction steps on the platinum electrocatalyst surface using Interface 1.0, a comprehensive computational code for the potential dependence of the electrochemical interface. Using these results as benchmarks, is found to be accurate to around 0.1 V when the Δ(ads)G are values calculated for the potentials of zero charge, instead of 1.229 V, which is a significant simplification. The variation in Δ(ads)G values between the calculated potentials of zero charge and 1.229 V are found to be 0.2 eV V(-1) or less. Prior work, using internal adsorption energies calculated at the potential of zero charge in place of Gibbs energies in was found to be accurate to within about 0.2 V. On platinum Δ(ads)G of the reaction OOH(ads) → O(ads) + OH(ads) is calculated at the potential of zero charge for the reactant and product to be about 1.2 eV exergonic under Langmuir conditions, and this Gibbs energy loss reduces the 1.229 V four-electron reversible potential on the platinum surface to an effective reversible potential of about 0.93 V for this mechanism on platinum. The effective reversible potential is a consequence of efficiency loss, not kinetics. Based on these values, the onset potential for four-electron oxygen reduction will be less than or equal to the effective reversible potential and on pure Pt(111) it appears to be equal to it.     

In situ STM evidence for the adsorption geometry of three N-heteroaromatic thiols on Au(111)

The electrochemical behavior of three heteroaromatic thiols (MBs) (2-mercaptobenzimidazole (MBI), 2-mercaptobenzothiazole (MBT), and 2-mercaptobenzoxazole (MBO)) on a Au(111) surface has been investigated by electrochemical scanning tunneling microscopy (ECSTM) and cyclic voltammetry (CV) in 0.1 M HClO(4) solution. All three thiols form oriented molecular cluster lines along the reconstruction line direction at 0.55 V. With the electrode potential shifting negatively, the molecules undergo a disordered-ordered structural transition. Molecularly resolved STM images show that all three molecules form striped adlayers in the desorption region on the Au(111) surface. The different heteroatoms in the heteroaromatic rings result in different electrochemical behavior of the MB self-assembled monolayers (SAMs). MBI, MBT, and MBO are proposed to interact with the substrate via the S-Au bonds from thiol group and the coordination interaction of N, S, and O with the substrate from the heteroaromatic ring, respectively. These results provide direct evidence of the electrochemical behavior and the adlayer structures of MB SAMs on the Au electrode.     

Reaction mechanism of CO oxidation on Cu(2)O(111): A density functional study

The possible reaction mechanisms for CO oxidation on the perfect Cu(2)O(111) surface have been investigated by performing periodic density functional theoretical calculations. We find that Cu(2)O(111) is able to facilitate the CO oxidation with different mechanisms. Four possible mechanisms are explored (denoted as M(ER1), M(ER2), M(LH1), and M(LH2), respectively): M(ER1) is CO((gas))+O(2(ads))→CO(2(gas)); M(ER2) is CO((gas))+O(2(ads))→CO(3(ads))→O((ads))+CO(2(gas)); M(LH1) refers to CO((ads))+O(2(ads))→O((ads))+CO(2(ads)); and M(LH2) refers to CO((ads))+O(2(ads))→OOCO((ads))→O((ads))+CO(2(ads)). Our transition state calculations clearly reveal that M(ER1) and M(LH2) are both viable; but M(ER1) mechanism preferentially operates, in which only a moderate energy barrier (60.22 kJ/mol) needs to be overcome. When CO oxidation takes place along M(ER2) path, it is facile for CO(3) formation, but is difficult for its decomposition, thereby CO(3) species can stably exist on Cu(2)O(111). Of course, the reaction of CO with lattice O of Cu(2)O(111) is also considered. However, the calculated barrier is 600.00 kJ/mol, which is too large to make the path feasible. So, we believe that on Cu(2)O(111), CO reacts with adsorbed O, rather than lattice O, to form CO(2). This is different from the usual Mars-van Krevene mechanism. The present results enrich our understanding of the catalytic oxidation of CO by copper-based and metal-oxide catalysts.     

Fullerene adlayers on various single-crystal metal surfaces prepared by transfer from L films

Fullerene adlayers prepared by the simple Langmuir-Blodgett (LB) method onto various well-defined single-crystal metal surfaces were investigated by in situ scanning tunneling microscopy (STM). The surface morphologies of fullerene adsorbed onto metal surfaces depended largely on the adsorbate-substrate interactions, which are governed by the types of surfaces. Too weak adsorption of C60 molecules onto iodine-modified Au(111) (I/Au(111)) allows surface migration of the molecules, and then, STM cannot visualize the C60 molecules. Stronger and appropriate adsorption onto bare Au(111) leads to highly ordered arrays relatively easily due to the limited surface migration of C60. On iodine-modified Pt(111) (I/Pt(111)) and bare Pt(111) surfaces, which have stronger adsorption, randomly adsorbed molecular adlayers were observed. Although C60 molecules on Au(111) were visualized as a featureless ball due to the maintenance of the rapid rotational motion (perturbation) of C60 on the surface at room temperature, those on I/Pt(111) revealed the intramolecular structures, thus indicating that the perturbation motion of molecules on the surface was prohibited.     

Quantification of photoelectrogenerated hydroxyl radical on TiO(2) by surface interrogation scanning electrochemical microscopy

The surface interrogation mode of scanning electrochemical microscopy (SI-SECM) was used for the detection and quantification of adsorbed hydroxyl radical ˙OH((ads)) generated photoelectrochemically at the surface of a nanostructured TiO(2) substrate electrode. In this transient technique, a SECM tip is used to generate in situ a titrant from a reversible redox pair that reacts with the adsorbed species at the substrate. This reaction produces an SECM feedback response from which the amount of adsorbate and its decay kinetics can be obtained. The redox pair IrCl(6)(2-/3-) offered a reactive, selective and stable surface interrogation agent under the strongly oxidizing conditions of the photoelectrochemical cell. A typical ˙OH((ads)) saturation coverage of 338 μC cm(-2) was found in our nanostructured samples by its reduction with the electrogenerated IrCl(6)(3-). The decay kinetics of ˙OH((ads)) by dimerization to produce H(2)O(2) were studied through the time dependence of the SI-SECM signal and the surface dimerization rate constant was found to be ～k(OH) = 2.2 × 10(3) mol(-1) m(2) s(-1). A radical scavenger, such as methanol, competitively consumes ˙OH((ads)) and yields a shorter SI-SECM transient, where a pseudo-first order rate analysis at 2 M methanol yields a decay constant of k'(MeOH) ～ 1 s(-1).     

The mechanism of N2O formation via the (NO)2 dimer: a density functional theory study

Catalytic formation of N(2)O via a (NO)(2) intermediate was studied employing density functional theory with generalized gradient approximations. Dimer formation was not favored on Pt(111), in agreement with previous reports. On Pt(211) a variety of dimer structures were studied, including trans-(NO)(2) and cis-(NO)(2) configurations. A possible pathway involving (NO)(2) formation at the terrace near to a Pt step is identified as the possible mechanism for low-temperature N(2)O formation. The dimer is stabilized by bond formation between one O atom of the dimer and two Pt step atoms. The overall mechanism has a low barrier of approximately 0.32 eV. The mechanism is also put into the context of the overall NO + H(2) reaction. A consideration of the step-wise hydrogenation of O(ads) from the step is also presented. Removal of O(ads) from the step is significantly different from O(ads) hydrogenation on Pt(111). The energetically favored structure at the transition state for OH(ads) formation has an activation energy of 0.63 eV. Further hydrogenation of OH(ads) has an activation energy of 0.80 eV.     

Collision-induced desorption in 193-nm photoinduced reactions in (O2+CO) adlayers on Pt(112)

The spatial distribution of desorbing O(2) and CO(2) was examined in 193-nm photoinduced reactions in O(2)+CO adlayers on stepped Pt (112)=[(s)3(111)x(001)]. The O(2) desorption collimated in inclined ways in the plane along the surface trough, confirming the hot-atom collision mechanism. In the presence of CO(a), the product CO(2) desorption also collimated in an inclined way, whereas the inclined O(2) desorption was suppressed. The inclined O(2) and CO(2) desorption is explained by a common collision-induced desorption model. At high O(2) coverage, the CO(2) desorption collimated closely along the (111) terrace normal.     

First principles based mean field model for oxygen reduction reaction

A first principles-based mean field model was developed for the oxygen reduction reaction (ORR) taking account of the coverage- and material-dependent reversible potentials of the elementary steps. This model was applied to the simulation of single crystal surfaces of Pt, Pt alloy and Pt core-shell catalysts under Ar and O(2) atmospheres. The results are consistent with those shown by past experimental and theoretical studies on surface coverages under Ar atmosphere, the shape of the current-voltage curve for the ORR on Pt(111) and the material-dependence of the ORR activity. This model suggests that the oxygen associative pathway including HO(2)(ads) formation is the main pathway on Pt(111), and that the rate determining step (RDS) is the removal step of O(ads) on Pt(111). This RDS is accelerated on several highly active Pt alloys and core-shell surfaces, and this acceleration decreases the reaction intermediate O(ads). The increase in the partial pressure of O(2)(g) increases the surface coverage with O(ads) and OH(ads), and this coverage increase reduces the apparent reaction order with respect to the partial pressure to less than unity. This model shows details on how the reaction pathway, RDS, surface coverages, Tafel slope, reaction order and material-dependent activity are interrelated.     

In situ attenuated total reflection infrared (ATR-IR) study of the adsorption of NO2-, NH2OH, and NH4+ on Pd/Al2O3 and Pt/Al2O3

In relation to the heterogeneous hydrogenation of nitrite, adsorption of NO2-, NH4+, and NH2OH from the aqueous phase was examined on Pt/Al2O3, Pd/Al2O3, and Al2O3. None of the investigated inorganic nitrogen compounds adsorb on alumina at conditions presented in this study. NO2-(aq) and NH4+(aq) on the other hand show similar adsorption characteristics on both Pd/Al2O3 and Pt/Al2O3. The vibrational spectrum of the NO2- ion changed substantially upon adsorption, clearly indicating that NO2- chemisorbs onto the supported metal catalysts. On the contrary, adsorption of NH4+ does not lead to significant change in the vibrational spectrum of the ion, indicating that the NH4+ ion does not chemisorb on the noble metal but is stabilized via an electrostatic interaction. When comparing the adsorption of hydroxylamine (NH2OH(aq)) on Pd/Al2O3 and Pt/Al2O3, significant differences were observed. On Pd/Al2O3, hydroxylamine is converted into a stable NH2(ads) fragment, whereas on Pt/Al2O3 hydroxylamine is converted into NO, possibly via HNO(ads) as an intermediate.     

Molecular adsorption at well-defined electrode surfaces: hydroquinone on Pd(111) studied by EC-STM

The interaction of hydroquinone (H2Q) with well-defined Pd(111) surfaces at preselected potentials in dilute H2SO4 has been studied by molecule-resolved electrochemical scanning tunneling microscopy (EC-STM). H2Q spontaneously undergoes oxidative chemisorption to benzoquinone (Q), which adopts a slightly tilted parallel orientation. Evidently, the surface coordination is through the quinone pi-electron system. At potentials within the double-layer region, a close-packed well-ordered Pd(111)-(3 x 3)-Q adlattice was formed. A potential excursion to 0.7 V, a potential at which the solution-phase Q/H2Q redox reaction takes place, introduced disorder into the organic adlayer; this positive-potential-induced order-to-disorder phase transition is reversible because the ordered (3 x 3)-Q adlattice was regenerated when the potential reverted to 0.4 V. When the potential was poised at 0.2 V, a potential at which hydrogen evolution was initiated, an appreciable fraction of Q was (hydrogenatively) desorbed; the remnant Q molecules were agglomerated in small islands that retained the (3 x 3) symmetry of the full adlayer. Two possible structural models of the Pd(111)-(3 x 3)-Q adlattice are described.     

Preoxidation of CO on Os-modified Pt(111): a comparison with Ru-modified Pt(111)

The variation in CO adsorption structures during the preoxidation of CO on Os-modified Pt(111) (Pt(111)/Os) was investigated using cyclic voltammetry and electrochemical scanning tunneling microscopy. The spontaneous deposition of Os on Pt(111) resulted in randomly scattered islands with a coverage range of 0.13-0.54. During preoxidation on Pt(111)/Os, a phase transition from (2 × 2)-α to (√19 × √19) via the transient structures of (2 × 2)-β and (1 × 1) took place as on unmodified Pt(111). As the amount of Os increased, however, the transient structures of (2 × 2)-β and (1 × 1) appeared at lower potentials with higher populations. When the population of the transient structures was greater than 50%, an oxidative CO stripping process took place to the structure of (√19 × √19), completing the preoxidation. These observations strongly support the idea that the presence of Os increases the mobility of adsorbed CO by electronic modification of the Pt(111) surface (electronic effect). In addition, the results obtained with Pt(111)/Os were compared with those of Pt(111)/Ru.     

Acetaldehyde on Pt(111) and Pt/Sn(111): a DFT study of the adsorption structures and of the vibrational spectra

The relative stability of the eta1mu1 (atop) and eta2mu2 (di-sigma) geometries of acetaldehyde are compared on Pt(111) and on two PtSn alloys ((2 x 2) and (square root(3) x square root(3))R30 degrees) by means of density functional theory (DFT) calculations. At low coverage on Pt (1/9 ML), the two forms are equivalent in energy, with eta1mu1 being slightly more stable. At high coverage (1/4 and 1/3 ML), eta2mu2 is less competitive and acetaldehyde is adsorbed through the aldehydic hydrogen. The evolution of the adsorption energy with the coverage and the apparition of the structure adsorbed through the aldehydic hydrogen are explained by the existence of attractive dipole-dipole interactions. On PtSn, only the eta1mu1 geometry is stable with an adsorption energy equal to that on Pt, in agreement with temperature-programmed desorption (TPD) experiments. The calculated vibrational spectra allow us to conclude that the experimental spectrum corresponds to a mixture of eta1mu1 (majority) and eta2mu2 (minority) structures on Pt and to only eta1mu1 on PtSn. The various interactions and the relative stability of the species on Pt and PtSn are explained by the density of states (DOS) curves.     

Influence of coadsorbed hydrogen on ethylene adsorption and reaction on a (radical3 x radical3)R30 degrees-Sn/Pt(111) surface alloy

The effect of surface-bound hydrogen adatoms on adsorption, desorption, and reaction of ethylene (CH(2)=CH(2)) on a (radical3 x radical3)R30 degrees-Sn/Pt(111) surface alloy with theta(Sn) = 0.33 was investigated by using temperature-programmed desorption (TPD) and Auger electron spectroscopy (AES). Preadsorbed H decreased the saturation coverage of chemisorbed ethylene and less H was required to completely block ethylene chemisorption on this alloy than that on Pt(111). This is also the first report of extensive H site-blocking of ethylene chemisorption on Pt(111). Preadsorbed H also decreased the desorption activation energy of ethylene on the alloy surface. The reaction chemistry of ethylene on this Sn/Pt(111) alloy is dramatically different than on the Pt(111) surface: the H-addition reaction channel taking ethylene to ethane on Pt(111) is totally inhibited on the alloy. This is important information for advancing understanding of the surface chemistry involved in hydrogenation and dehydrogenation catalysis.     

NO2在Ag/Pt(110)双金属表面上的吸附和分解

利用俄歇电子能谱(AES)和程序升温脱附谱(TDS)研究了NO₂在Ag/Pt(110)双金属表面的吸附和分解.室温下NO₂ 在Ag/Pt(110)双金属表面发生解离吸附, 生成NO(ads)和O(ads)表面吸附物种. 在升温过程中NO(ads)物种发生脱附或者进一步分解. 500 K时NO₂在Ag/Pt(110)双金属表面发生解离吸附生成O(ads)表面吸附物种. Pt 向Ag传递电子, 从而削弱Pt－O键的强度, 降低O(ads)从Pt 表面的并合脱附温度. 发现能够形成具有稳定组成的Ag/Pt(110)合金结构, 其表现出与Pt(110)-(1×2)相似的解离吸附NO₂能力, 但与O(ads)的结合明显弱于Pt(110)-(1×2). 该AgPt(110)合金结构是可能的低温催化直接分解氮氧化物活性结构.     

Underpotential deposition of cobalt onto polycrystalline platinum

An electrochemical study of cobalt electrodeposition onto a polycrystalline platinum electrode from an aqueous solution (10⁻² M CoCl₂ + 1 M NH₄Cl (pH 9.5)) was carried out through cyclic voltammetry and potential step techniques. Analysis of the voltammetric data clearly showed that a cobalt adlayer is formed during the application of potential in the underpotential deposition (upd) region. Formation of this cobalt adlayer involved the simultaneous presence of both adsorption and 2D nucleation processes. Cobalt adlayers obtained by linear voltammetry in upd region were analyzed employing diffuse reflectance spectroscopy (DRS). By using theoretical quantum studies at PM6//HF/LANL1MB level, it was possible to assign the peaks obtained by DRS at 328 and 337 nm to the cobalt adsorption on Pt(111) and Pt(100), respectively, while the signals recorded at 355 and 362 nm were related with the clean platinum surfaces Pt(100) and Pt(111). Also, quantum calculations at the PM6 level indicated that the energy formation order is Co-Pt(100) > Co-Pt(111) > Co-Pt(110) > Co-Co(surface).     

Transition state for beta-hydride elimination in alkyl groups on Pt(111)

The transition state for beta-hydride elimination in alkyl groups on the Pt(111) surface has been probed by studying the effects of fluorine substitution on the barriers to beta-hydride elimination, DeltaE++(betaH). Four different fluoroalkyl groups have been formed on the Pt(111) surface by dissociative adsorption of four fluoroalkyl iodides: RCH(2)CH(2)-I (R = CF(3), CF(3)CH(2), and CF(3)CF(2)) and (CF(3))(2)CHCH(2)-I. In the absence of preadsorbed hydrogen, fluoroalkyl groups on the Pt(111) surface dehydrogenate via beta-hydride elimination to form unsaturated fluorocarbons and deposit hydrogen atoms onto the surface. Those hydrogen atoms then hydrogenate the remaining fluoroalkyl groups to produce fluoroalkanes that desorb rapidly from the surface. The kinetics of hydrogenation and fluoroalkane desorption are rate limited by the beta-hydride elimination step and thus serve as measures of the kinetics of beta-hydride elimination. The field effects of the fluorinated substituents increase the barriers to beta-hydride elimination with a reaction constant of rho(F) = 19 +/- 2 kJ/mol. The interpretation of this effect is that the beta-carbon atom in the transition state is cationic, [RC(delta+...)H]++, with respect to the reactant. The field effect of the fluorinated substituent energetically destabilizes the electron deficient beta-carbon atom in the transition state. This is consistent with observations made on the Cu(111) surface; however, the substituent effect is significantly smaller on the Pt(111) surface. On the Pt(111) surface, the transition state for beta-hydride elimination is less polarized with respect to the initial state alkyl group than on the Cu(111) surface.     

Adsorption, desorption, and clustering of H2O on Pt111

The adsorption, desorption, and clustering behavior of H2O on Pt111 has been investigated by specular He scattering. The data show that water adsorbed on a clean Pt111 surface undergoes a structural transition from a random distribution to clustered islands near 60 K. The initial helium scattering cross sections as a function of temperature are found to be insensitive to the incident H2O flux over a range of 0.005 monolayers (ML)/s-0.55 ML/s indicating that the clustering process is more complex than simple surface diffusion. The coarsening process of an initially random distribution of water deposited at 25 K is found to occur over a broad temperature range, 60相似文献   

Voltammetric Characterization of trans-Dioxo Ethylenediamine Complexes of Re(V) in Aqueous Solutions

The electrochemical behavior of trans-[Re((V))O(2)(en)(2)]I and trans-[Re((V))O(2) (en)(2)]ClO(4) (en=ethylenediamine) complexes was studied by cyclic voltammetry on Au electrodes. Experiments were performed in aqueous solutions at pH 7.0 and at room temperature. The complex voltammogram was characterized by Re-containing species, assigned to the [Re((V))O(2)(en)(2)](+)/[Re((IV))O(2)(en)(2)] couple, and I-containing species. To overcome I interference, the electrochemical response of Re complexes was segregated by performing a reductive desorption of adsorbed I from Au. Copyright 2001 Academic Press.