Thermal hazard evaluation for methyl ethyl ketone peroxide mixedwith inorganic acids

Methyl ethyl ketone peroxide (MEKPO) possesses complex structures which have caused many incidents involving fires or explosions by mixing with incompatible substances, external fires, and others. In this study, reactivities or incompatibilities of MEKPO with inorganic acids (HCl, HNO₃, H₃PO₄ and H₂SO₄) were assessed by differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2). Parameters obtained by the above-mentioned devices could be readily employed to discuss the runaway reaction, such as onset temperature (T ₀), heat of reaction (ΔH _d), time to maximum rate (TMR), maximum self heat rate (dT/dt)_max, adiabatic temperature rise (ΔT _ad), maximum pressure of decomposition (P _max) and so on. Mixing MEKPO with hydrochloric acid resulted in the lowest T ₀ among inorganic acids. Nitric acid not only lowered the T ₀ but also delivered the highest heat releasing rate or self heat rate (dT/dt), which was concluded to be the worst case in terms of contamination hazards during storage or transportation of MEKPO.     

Thermal hazards evaluation of cumene hydroperoxide mixed with its derivatives

Over 90% of the cumene hydroperoxide (CHP) produced in the world is applied in the production of phenol and acetone. The additional applications were used as a catalyst, a curing agent, and as an initiator for polymerization. Many previous studies from open literature have verified and employed various aspects of the thermal decomposition and thermokinetics of CHP reactions. An isothermal microcalorimeter (thermal activity monitor III, TAM III), and a thermal dynamic calorimetry (differential scanning calorimetry, DSC) were used to resolve the exothermic behaviors, such as exothermic onset temperature (T ₀), heat power, heat of decomposition (ΔH _d), self-heating rate, peak temperature of reaction system, time to maximum rate (TMR), etc. Furthermore, Fourier transform infrared (FT-IR) spectrometry was used to analyze the CHP products with its derivatives at 150 °C. This study will assess and validate the thermal hazards of CHP and incompatible reactions of CHP mixed with its derivatives, such as acetonphenone (AP), and dimethylphenyl carbinol (DMPC), that are essential to process safety design.     

Determination of traces of Sb(III) using ASV in Sb-rich water samples affected by mining

Chemical speciation [Sb(V) and Sb(III)] affects the mobility, bioavailability and toxicity of antimony. In oxygenated environments Sb(V) dominates whereas thermodynamically unstable Sb(III) may occur. In this study, a simple method for the determination of Sb(III) in non acidic, oxygenated water contaminated with antimony is proposed. The determination of Sb(III) was performed by anodic stripping voltammetry (ASV, 1–20 μg L⁻¹ working range), the total antimony, Sb(tot), was determined either by inductively coupled plasma mass spectrometry (ICP-MS, 1–100 μg L⁻¹ working range) or inductively coupled plasma optical emission spectrometry (ICP-OES, 100–10,000 μg L⁻¹ working range) depending on concentration. Water samples were filtered on site through 0.45 μm pore size filters. The aliquot for determination of Sb(tot) was acidified with 1% (v/v) HNO₃. Different preservatives, namely HCl, L(+) ascorbic acid or L(+) tartaric acid plus HNO₃, were used to assess the stability of Sb(III) in synthetic solutions.The method was tested on groundwater and surface water draining the abandoned mine of Su Suergiu (Sardinia, Italy), an area heavily contaminated with Sb. The waters interacting with Sb-rich mining residues were non acidic, oxygenated, and showed extreme concentrations of Sb(tot) (up to 13,000 μg L⁻¹), with Sb(III) <10% of total antimony. The stabilization with L(+) tartaric acid plus HNO₃ appears useful for the determination of Sb(III) in oxygenated, Sb-rich waters. Due to the instability of Sb(III), analyses should be carried out within 7 days upon the water collection. The main advantage of the proposed method is that it does not require time-consuming preparation steps prior to analysis of Sb(III).     

Facilitated transport of Am(III) through a flat-sheet supported liquid membrane (FSSLM) containing tetra(2-ethyl hexyl) diglycolamide (TEHDGA) as carrier

Facilitated transport of Am(III) in nitric acid medium using tetra(2-ethyl hexyl) diglycolamide (TEHDGA) in n-dodecane as carrier was studied. It was aimed at finding out the physico-chemical model for the transport of Am(III) using TEHDGA/n-dodecane as carrier under various experimental parameters like feed acidity, carrier concentration, varying strippant, varying membrane pore size, etc. The feed acidity and carrier concentrations were varied from 1 M to 6 M HNO₃ and 0.1 M to 0.3 M TEHDGA/n-dodecane, respectively. The transport of Am(III) increased with increase in feed acidity and carrier concentration reaching maximum at 3 M HNO₃ and 0.2 M TEHDGA/n-dodecane, respectively. Several stripping agents were tested and 0.1 M HNO₃ was found to be the most suitable stripping agent for this system. Almost quantitative transport of Am(III) was observed at about 180 min with feed acidity of 3 M HNO₃, 0.1 M HNO₃ as strippant and 0.2 M TEHDGA/n-dodecane as carrier. The pore size of the membrane support was varied from 0.20 μm to 5 μm and the permeation coefficient increased with increase in pore size up to 0.45 μm (2.43 × 10⁻³ cm/s), and then decreased with further increase in pore size. The plot between permeation coefficient vs. (membrane thickness)⁻¹ was linear which showed that the Am(III) transport was membrane diffusion limited. The membrane diffusion coefficient calculated from the graph was found to be 1.27 × 10⁻⁶ cm²/s and its theoretical value was 1.22 × 10⁻⁶ cm²/s. The stability of the carrier against leaching out of the membrane support as well as the integrity of membrane support was studied over a period of 30 days and was found to be satisfactory within the studied time period.     

Mechanistic aspects of uncatalyzed and ruthenium(III) catalyzed oxidation of dl-ornithine by copper(III) periodate complex in aqueous alkaline medium: A comparative kinetic study

The oxidation of dl-ornithine monohydrochloride (OMH) by diperiodatocuprate(III) (DPC) has been investigated both in the absence and presence of ruthenium(III) catalyst in aqueous alkaline medium at a constant ionic strength of 0.20 mol dm⁻³ spectrophotometrically. The stiochiometry was same in both the cases, i.e., [OMH]/[DPC] = 1:4. In both the catalyzed and uncatalyzed reactions, the order of the reaction with respect to [DPC] was unity while the order with respect to [OMH] was < 1 over the concentration range studied. The rate increased with an increase in [OH⁻] and decreased with an increase in [IO₄⁻] in both cases. The order with respect to [Ru(III)] was unity. The reaction rates revealed that Ru(III) catalyzed reaction was about eight-fold faster than the uncatalyzed reaction. The oxidation products were identified by spectral analysis. Suitable mechanisms were proposed. The reaction constants involved in the different steps of the reaction mechanisms were calculated for both cases. The catalytic constant (K_C) was also calculated for catalyzed reaction at different temperatures. The activation parameters with respect to slow step of the mechanism and also the thermodynamic quantities were determined. Kinetic experiments suggest that [Cu(H₂IO₆)(H₂O)₂] is the reactive copper(III) species and [Ru(H₂O)₅OH]²⁺ is the reactive Ru(III) species.     

Thermal runaway evaluation of α-methylstyrene and trans-β-methylstyrene with benzaldehyde

Styrene is an important chemical in the petrochemical industry. In recent years, there have been sporadic releases, runaway reactions, fires, and thermal explosion accidents incurred by styrene and its derivatives worldwide. The purpose of this study was to estimate the impact of styrene and its derivatives of α-methylstyrene (AMS) and trans-β-methylstyrene (TBMS) contacting with benzaldehyde. Experiments were carried out to evaluate the thermokinetic parameters estimated by differential scanning calorimetry (DSC) and thermal activity monitor III (TAM III). TAM III was used to determine the fundamental thermokinetics under various isothermal temperatures, 80, 90 and 100°C. This autocatalytic reaction was demonstrated in thermal curves. After styrene was contacted with benzaldehyde, the exothermic onset temperature (T ₀) and the total heat of reaction (Q _total) were altered by DSC tests. When benzaldehyde is mixed with AMS and TBMS, the reaction time will be shorter but the enthalpy reduced, as revealed by TAM III tests. As AMS and TBMS, respectively, were contacted with benzaldehyde, both exothermic phenomena were changed during the reaction excursion. According to the results of this research, an operator should dictate the oxygen concentration in order to avoid any potential hazards during handling and transportation.     

Runaway reaction of lauroyl peroxide with nitric acid by DSC

Pooling lauroyl peroxide (LPO) with nitric acid, we used differential scanning calorimetry (DSC) to assess the thermokinetic parameters, such as exothermic onset temperature (T ₀), heat of decomposition (ΔH _d), frequency factor (A), and the other safety parameters. When LPO was contaminated with nitric acid (HNO₃), we found the exploder 1-nitrododecane. Obvious products were sensitive and hazardous chemicals. Concentration reaching 1–12 N HNO₃ emitted a large amount of heat. This study combined with curve-fitting method to elucidate its unsafe characteristics and thermally sensitive structure to help prevent runaway reactions, fires and explosions in the process environment. According to the findings and the concept of inherently safer design, LPO runaway reactions could be adequately prevented in the relevant plants.     

The Affinity of Gallium(III) and Indium(III) for Nitrogen Donor Ligands

Abstract

Dedicated to Professor Arthur Martell on the occasion of his seventy fifth birthday.

The complexes of In(III) and Ga(III) with a variety of nitrogen donor ligands were studied in aqueous solution by glass electrode potentiometry at 25°C in 0.1 M NaNO₃. The ligands were 2-aminomethylpyri-dine (AMPY), ethylenediamine (EN), N,N,N',N'-tetrakis(2-hydroxypropyl)ethylenediamine (THPED), and N,N-bis(2-hydroxyethyl)glycine (BICIN). A variety of mixed ligand complexes of the MLOH type were detected with many of the above ligands as L. The logK₁ values obtained were with Ga(III) 8.40 (AMPY), 7.94 (THPED) 12.72 (EN), and In(III) 7.6 (AMPY), 8.20 (THPED), and 7.06 (BICIN). These formation constants are discussed in relation to previous predictions that In(III) and Ga(III) would have a substantial chemistry with nitrogen donor ligands. Of particular interest is the Ga(III) system with EN, where a very stable Ga(EN)³⁺ complex is formed, but no higher complexes except for hydrolyzed species such as Ga(EN)OH²⁺ and Ga(EN)(OH)₂ ⁺.     

Determination of lead by hydride generation inductively coupled plasma mass spectrometry (HG-ICP-MS): On-line generation of plumbane using potassium hexacyanomanganate(III)

A hydride generation (HG) procedure has been described for determination of Pb by ICP-MS using potassium hexacyanomanganate(III), K₃Mn(CN)₆, as an additive to facilitate the generation of plumbane (PbH₄). Potassium hexacyanomanganate(III) was prepared in acidic medium as it was unstable in water. The stability of hexacyanomanganate(III) was examined in dilute solutions of HCl, HNO₃ and H₂SO₄. The solutions prepared in 1% v/v H₂SO₄ were found to be stable for over a period of 24 h. The least suitable medium was 1% v/v HNO₃. For generation of plumbane, acidic hexacyanomanganate(III) and sample solutions were mixed on-line along a 5-cm long tygon tubing (1.14 mm i.d.) and then reacted with 2% m/v sodium borohydride (NaBH₄). A concentration of 0.5% m/v K₃Mn(CN)₆ facilitated the generation of PbH₄ remarkably. In comparison to H₂SO₄, HCl provided broader working range for which optimum concentration was 1% v/v. No significant interferences were noted from transition metals and hydride forming elements, up to 0.5 μg mL⁻¹ levels, except Cu which depressed the signals severely. The depressive effects in the presence of 0.1 μg mL⁻¹ Cu were alleviated by increasing the concentration of K₃Mn(CN)₆ to 2% m/v. Under these conditions, the sensitivity was enhanced by a factor of at least 42 to 48. The detection limit (3 s) was 0.008 μg L⁻¹ for ²⁰⁸Pb isotope. Average signal-to-noise ratio (S/N) ranged between 18 and 20 for 1.0 μg mL⁻¹ Pb solution. The accuracy of the method was verified by analysis of several certified reference materials, including Nearshore seawater (CASS-4), Bone ash (SRM 1400), and Mussel tissue (SRM 2976). The procedure was also successfully applied to the determination of Pb in coastal seawater samples by ICP-MS.     

Synthesis,structural characterization and biological studies of neodymium(III) and samarium(III) complexes with mercaptotriazole Schiff bases

A series of neodymium(III) and samarium(III) complexes of type [Ln(L)Cl(H₂O)₃] have been synthesized with Schiff bases (LH₂) derived from 3‐(phenyl/substituted phenyl)‐4‐amino‐5‐mercapto‐1,2,4‐triazoles and isatin. The structures of the complexes were established using elemental analysis, molar conductivities, magnetic moments, infrared, NMR (¹H, ¹³C) and UV–visible spectra, X‐ray diffraction and mass spectrometry. The thermal behaviour of these compounds under non‐isothermal conditions was investigated using thermogravimetry and differential thermogravimetry. The intermediates obtained at the end of various thermal decomposition steps were identified from elemental analysis and infrared spectral studies. All the ligands and their complexes were also screened for their antibacterial activity against Staphylococcus aureus and Bacillus subtilis and antifungal activity against Aspergillus niger, Aspergillus flavus and Colletotrichum capsici. The screening results were correlated with the structural features of the compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Kinetics and reactivities of ruthenium(III)- and osmium(VIII)-catalyzed oxidation of ornidazole with chloramine-T in acid and alkaline media: A mechanistic approach

Ornidazole is an antiparasitic drug having a wide spectrum of activity. Literature survey has revealed that no attention has been paid towards the oxidation of ornidazole with any oxidant from the kinetic and mechanistic view point. Also no one has examined the role of platinum group metal ions as catalysts in the oxidation of this drug. Such studies are of much use in understanding the mechanistic profile of ornidazole in redox reactions and provide an insight into the interaction of metal ions with the substrate in biological systems. For these reasons, the Ru(III)- and Os(VIII)-catalyzed kinetics of oxidation of ornidazole with chloramine-T have been studied in HCl and NaOH media, respectively at 313 K. The oxidation products and kinetic patterns were found to be different in acid and alkaline media. Under comparable experimental conditions, in Ru(III)-catalyzed oxidation the rate law is −d[CAT]/dt = k [CAT]_o[ornidazole]_o^x[H⁺]^−y[Ru(III)]^z and it takes the form −d[CAT]/dt = k [CAT]_o[ornidazole]_o^x[OH⁻]^y[Os(VIII)][ArSO₂NH₂]^−z for Os(VIII)-catalyzed reaction, where x, y and z are less than unity. In acid medium, 1-chloro-3-(2-methyl-5-nitroimidazole-1-yl)propan-2-one and in alkaline medium, 1-hydroxy-3-(2-methyl-5-nitroimidazole-1-yl)propan-2-one were characterized as the oxidation products of ornidazole by GC–MS analysis. The reactions were studied at different temperatures and the overall activation parameters have been computed. The solvent isotope effect was studied using D₂O. Under identical set of experimental conditions, the kinetics of Ru(III) catalyzed oxidation of ornidazole by CAT in acid medium have been compared with uncatalyzed reactions. The relative rates revealed that the catalyzed reactions are about 5-fold faster whereas in Os(VIII) catalyzed reactions, it is around 9 times. The catalytic constant (K_C) has been calculated for both the catalysts at different temperatures and activation parameters with respect to each catalyst have been evaluated. The observed experimental results have been explained by plausible mechanisms. Related rate laws have been worked out.     

Application of double-spike isotope dilution for the accurate determination of Cr(III), Cr(VI) and total Cr in yeast

A method is presented for the simultaneous determination of Cr(III) and Cr(VI) in yeast using species-specific double-spike isotope dilution (SSDSID) with anion-exchange liquid chromatography (LC) separation and sector field inductively coupled plasma mass spectrometric (SF-ICP-MS) detection. Total Cr is quantitated using ID SF-ICP-MS. Samples were digested on a hot plate at 95±2 °C for 6 h in an alkaline solution of 0.5 M NaOH and 0.28 M Na₂CO₃ for the determination of Cr(III) and Cr(VI), whereas microwave-assisted decomposition with HNO₃ and H₂O₂ was used for the determination of total Cr. Concentrations of 2,014±16, 1,952±103 and 76±48 mg kg⁻¹ (one standard deviation, n=4, 3, 3), respectively were obtained for total Cr, Cr(III) and Cr(VI) in the yeast sample. Significant oxidation of Cr(III) to Cr(VI) (24.2±7.6% Cr(III) oxidized, n=3) and reduction of Cr(VI) to Cr(III) (37.6±6.5% Cr(VI) reduced, n=3 ) occurred during alkaline extraction and subsequent chromatographic separation at pH 7. Despite this significant bidirectional redox transformation, quantitative recoveries for both Cr(III) and Cr(VI) were achieved using the SSDSID method. In addition, mass balance between total Cr and the sum of Cr(III) and Cr(VI) concentrations was achieved. Method detection limits of 0.3, 2 and 30 mg kg⁻¹ were obtained for total Cr, Cr(VI) and Cr(III), respectively, based on a 0.2-g sub-sample.     

Mechanistic and Spectral Studies of the Ruthenium(III) Catalysed Oxidation of Sulfanilic Acid by Alkaline Hexacyanoferrate(III)

Summary. The kinetics of ruthenium(III) catalysed oxidation of sulfanilic acid (p-aminobenzenesulfonic acid) by hexacyanoferrate(III) in alkaline medium at a constant ionic strength of 2.5mol·dm^–3 has been studied spectrophotometrically using a rapid kinetic accessory. The reaction exhibits 2:8 stoichiometry (SNA:HCF(III)). The reaction showed first order kinetics in [hexacyanoferrate(III)] and [ruthenium(III)] and apparent less than unit order in both sulfanilic acid and alkali concentrations. The reaction rate increases with increasing ionic strength but the relative permittivity (_T) of the medium has a negligible effect on the rate of the reaction. Initial addition of reaction products did not affect the rate significantly. A mechanism involving the formation of a complex between sulfanilic acid and hydroxylated species of ruthenium(III) has been proposed. The active species of HCF(III) and ruthenium(III) are understood as [Fe(CN)₆^3–] and [Ru(H₂O)₅OH]²⁺, respectively. The main products were identified by IR, NMR, and mass spectral studies. The reaction constants involved in the different steps of mechanism are calculated. The activation parameters with respect to the slow step of the mechanism are computed and discussed and thermodynamic quantities are also calculated.     

Complexes of oxamic acid with Au(III) and Rh(III)

The preparation and some properties of the deprotonated complexes of oxamic acid with Au(III) and Rh(III) are reported. On the basis of analytical results, conductometric measurements, magnetic moments and spectral data (IR and UV-visible), a square planar structure is proposed for K[AuL(OH)₂] and octahedral for K₃[RhL ₃] 3H₂O (whereLH₂=oxamic acid).L ^2– acts as a bidentate, non-bridging ligand.

---

Komplexe der Oxamidsäure mit Au(III) und Rh(III)

Zusammenfassung Es wird über die Darstellung und einige Eigenschaften von deprotonierten Komplexen der Oxamidsäure mit Au(III) und Rh(III) berichtet. Auf der Grundlage von analytischen Ergebnissen, Leitfähigkeitsmessungen, magnetischen Momenten und IR- und UV(vis)-spektroskopischen Daten wird für K[AuL(OH)₂] eine quadratisch planare und für K₃[RhL ₃] 3 H₂O eine oktaedrische Struktur vorgeschlagen (LH₂=Oxamidsäure).L ^2– reagiert als zweizähniger, nicht überbrückender Ligand.

     

Speciation of antimony by atomic absorption spectrometry. Applicability to selective determination of Sb(III) and Sb(V) in liquid samples and of bioavailable antimony in sediments and soil samples

A comparative study was made of several methods to speciale Sb(III) and Sb(V) by AAS: 1) Selective extraction of Sb(III) with lactic acid/malachite green graphite furnace-AAS, 2) Sb(III) and total antimony determination by hydride generation-AAS coupled to flow injection, batch, and continuous flow systems. These methods were applied to determine total antimony and Sb(III) in sea and surface water and total antimony in sediments and in soil. For soils different sample pretreatments were used: HNO₃-H₂SO₄-HC1O₄, HF-HNO₃-H₂SO₄-HC1O₄, cold aqua regia and slurry formation procedures in water and 4M HC1. In each case the recovery of total antimony and the ability to selective determine Sb(III) were studied. The detection limits obtained were 0.01 ng, 0.07 ng, 2.97 ng and 0.21 ppb for GF-AAS, FIA-HG-AAS, HG (Batch)-AAS, and HG (continuous flow)-AAS, respectively.     

New Thioantimonates(III) with Different Sb:S Ratios: Solvothermal Syntheses and Crystal Structures of [(C3H10NO)(C3H10N)][Sb8S13], [(C2H8NO)(C2H8N)(CH5N)][Sb8S13], [(C6H16N2)(C6H14N2)][Sb6S10], and [C8H22N2][Sb4S7]

Four new thioantimonates(III) with compositions [(C₃H₁₀NO)(C₃H₁₀N)][Sb₈S₁₃] ( 1 ) (C₃H₉NO = 1‐amino‐3‐propanol, C₃H₉N = propylamine), [(C₂H₈NO)(C₂H₈N)(CH₅N)][Sb₈S₁₃] ( 2 ) (C₂H₇NO = ethanolamine, C₂H₇N = ethylamine, CH₅N = methylamine), [(C₆H₁₆N₂)(C₆H₁₄N₂)][Sb₆S₁₀] ( 3 ) (C₆H₁₄N₂ = 1,2‐diaminocyclohexane) and [C₈H₂₂N₂][Sb₄S₇] ( 4 ) (C₈H₂₀N₂ = 1,8‐diaminooctane) were synthesized under solvothermal conditions. Compound 1 : triclinic space group P$\bar{1}$ , a = 6.9695(6) Å, b = 13.8095(12) Å, c = 18.0354(17) Å, α = 98.367(11), β = 96.097(11) and γ = 101.281(11)°; compound 2 : monoclinic space group P2₁/m, a = 7.1668(5), b = 25.8986(14), c = 16.0436(11) Å, β = 96.847(8)°; compound 3 : monoclinic space group P2₁/n, a = 11.6194(9), b = 10.2445(5) Å, c = 27.3590(18) Å, β = 91.909(6)°; compound 4 : triclinic space group P$\bar{1}$ , a = 7.0743(6), b = 12.0846(11), c = 13.9933(14) Å, α = 114.723(10), β = 97.595(11), γ = 93.272(11)°. The main structural feature of the two atoms thick layered [Sb₈S₁₃]^2– anion in 1 are large nearly rectangular pores with dimensions 11.2 × 11.7 Å. The layers are stacked perpendicular to [100] to form tunnels being directed along [100]. In contrast to 1 the structure of 2 contains a [Sb₈S₁₃]^2– chain anion with Sb₁₂S₁₂ pores measuring about 8.9 × 11.5 Å. Only if longer Sb–S distances are considered as bonding interactions a layered anion is formed. The chain anion [Sb₆S₁₀]^2– in compound 3 is unique and is constructed by corner‐sharing SbS₃ pyramids. Two symmetry‐related single chains consisting of alternating SbS₃ units and Sb₃S₃ rings are bound to Sb₄S₄ rings in chair conformation. Finally, in the structure of 4 the SbS₃ and SbS₄ moieties are joined corner‐linked to form a chain of alternating SbS₄ units and (SbS₃)₃ blocks. Neighboring chains are connected into sheets that contain relatively large Sb₁₀S₁₀ heterorings. The sheets are further connected by sulfur atoms generating four atoms thick double sheets.     

Thermal explosion simulation of methyl ethyl ketone peroxide in three types of vessel under the same volume by explosion models

Methyl ethyl ketone peroxide (MEKPO), which has highly reactive and exothermically unstable characteristics, has been extensively employed in the chemical industries. It has also caused many thermal explosions and runaway reaction accidents in manufacturing processes during the last three decades in Taiwan, Japan, Korea, and China. The goal of this study was to simulate thermal upset by MEKPO for an emergency response. Vent sizing package 2 (VSP2) was used to determine the thermokinetics of 20 mass% MEKPO. Data of thermokinetics and hazard behaviors were employed to simulate thermal explosion in three types of vessel containing 20 mass% MEKPO under various scenarios at the same volume. To compare and appraise the difference of important parameters, such as maximum temperature (T _max), maximum pressure (P _max), etc. This was necessary and useful for investigating the emergency response procedure associated with industrial applications.     

[Bis(tetrahydrofuran–O)–bis(1,3–dialkyl–2–diphenylphosphanyl–1,3–diazaallyl)calcium] – Synthesis and Crystal Structures of Calcium Bis[phospha(III)guanidinates] and Investigations of Catalytic Activity

The reaction of [(thf)₄Ca(PPh₂)₂] ( 1 ) with diisopropyl– and dicyclohexylcarbodiimides yields the phospha(III)guanidinates [(thf)₂Ca{RNC(PPh₂)NR}₂] with R = isopropyl ( 2 ) and cyclohexyl ( 3 ). The metathesis reaction of K{RNC(PPh₂)NR} with anhydrous CaI₂ also allows the synthesis of these phospha(III)guanidinate complexes 2 and 3 . For 2 a cis arrangement is observed whereas 3 crystallizes as trans isomer. The phospha(III)guanidinates act as bidentate chelate bases with an average Ca–N distance of 242.5 pm. The C–P bond length between the PPh₂ fragment and the 1,3–diazaallyl unit is with values above 190 pm very large. The complexes 2 and 3 show a moderate catalytic activity in hydrophosphanylation reactions of dialkylcarbodiimides with diphenylphosphane.     

Actinides selective extractants coated magnetite nanoparticles for analytical applications

N,N,N′,N′-tetraoctyl diglycolamide (TODGA) and bis(2-ethylhexy)phosphoric acid (HDEHP) were coated on Fe₃O₄ nanoparticles under different chemical conditions. The TODGA-coated magnetite nanoparticles (Fe₃O₄@TODGA) captured representative actinides Am(III) and Pu(IV) at 3–4 M HNO₃ with high efficiency. However, the HNO₃ induced pre-organization of TODGA, before coating on the magnetite nanoparticles, was found to be important for the sorption of Am(III) and Pu(IV) ions. The Fe₃O₄@HDEHP particles exhibited selectivity toward Pu(IV), and Am(III) did not sorb from 3 to 4 M HNO₃. The quantification of Pu(IV) preconcentrated on coated particles was carried out by removing the extractant coating in dioxane based scintillator, followed by liquid scintillation counting.

     

Darstellung und Kristallstruktur von (n-Bu4N)3[Ir(NCS)(SCN)5]

Preparation and Crystal Structure of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] The evaporated ethanolic extrakt of the reaction product of K₃[IrCl₆] and HNO₃, refluxed with an aqueous KSCN solution yields a mixture of the linkage isomers [Ir(NCS)_n(SCN)_6?-n]^3?, n = 0? 2, and small amounts of linkage isomeric chloropentarhodanoiridates(III), from which [Ir(NCS)(SCN)₅]^3? has been isolated by ion exchange chromatography on DEAE-cellulose. The X-Ray structure determination on a single crystal of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] (monoclinic, space group P 2₁/a, a = 17.513(5), b = 32.607(5), c = 23.661(5) Å, β = 94.757(5)°, Z = 8) confirms the existance of a heteroleptic hexakis(thiocyanato(N)-thiocyanato(S))iridate(III) with an Ir? N distance of 2.03 Å and Ir? S bond lengths between 2.29 and 2.38 Å. The SCN groups with angles between 166 and 175° are nearly linear with Ir? S? C angles from 99.9 to 109.4°. The Ir? N? C angles of the two crystallographic independent anions are 166 and 174°.