Vinylimidazole copolymers: coordination chemistry,solubility, and cross-linking as function of Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> complexation

P(1-VIm-co-MMA) copolymers with 4 or 44 wt.% 1-VIm (abbreviated PVM-4 and PVM-44) where polymerized from 1-VIm (1-vinylimidazole) and methylmethacrylate with azobisisobutyronitrile as initiator and reacted with either Cu²⁺ or Zn²⁺. The resulting coordinated polymer complexes were studied using ICP-AES, CP/MAS ¹³C NMR, conductivity measurements, vibrational spectroscopy (mid-FTIR and far-FTIR), DSC, and EPR. It was established by ICP-AES, CP/MAS ¹³C NMR, conductivity, mid-FTIR and EPR measurements that the transition metal ions in the complexes were exclusively coordinated by the imidazole ligand. The coordination geometry is square planar with regard to Cu(II) complexes. The strong interaction between the polymeric imidazole ligand and the transition metal ion cross-links the system, resulting in augmentation of T _g (the glass transition temperature), especially for copolymers with high relative amount of 1-VIm. The effect of changing metal ion is more complicated and depends on both the strength of the coordinate interaction as well as the coordination number. The solubility of the coordinate polymer complex in conventional solvents is low due to the coordinate cross-links. However, the coordinate polymer complexes are soluble in strongly coordinating solvents such as acetonitrile and dimethylsulfoxide.     

Vacancy‐Controlled Na+ Superion Conduction in Na11Sn2PS12

Highly conductive solid electrolytes are crucial to the development of efficient all‐solid‐state batteries. Meanwhile, the ion conductivities of lithium solid electrolytes match those of liquid electrolytes used in commercial Li⁺ ion batteries. However, concerns about the future availability and the price of lithium made Na⁺ ion conductors come into the spotlight in recent years. Here we present the superionic conductor Na₁₁Sn₂PS₁₂, which possesses a room temperature Na⁺ conductivity close to 4 mS cm^?1, thus the highest value known to date for sulfide‐based solids. Structure determination based on synchrotron X‐ray powder diffraction data proves the existence of Na⁺ vacancies. As confirmed by bond valence site energy calculations, the vacancies interconnect ion migration pathways in a 3D manner, hence enabling high Na⁺ conductivity. The results indicate that sodium electrolytes are about to equal the performance of their lithium counterparts.     

Measurement of <Superscript>90</Superscript>Sr in primary coolant of pressurized water reactor

The present procedure for analysing ⁹⁰Sr combines the use of a non radioactive carrier with high pressure ion chromatography separation, conductivity detection of the carrier and optimized external counting by liquid scintillation. This improvement with respect to traditional methods led to a more rapid and efficient purification stage. The present work proves that activities of ⁹⁰Sr as low as 3 Bq/L can be measured in highly contaminated pressurized water reactor primary coolant matrix without any observed radiochemical interference. The approach shows promise for the analysis of other emitters of low energy radiation, or isotopes subject to high background or matrix effects in a PWR primary coolant.     

Variation in structure and Li<Superscript>+</Superscript>-ion migration in argyrodite-type Li<Subscript>6</Subscript>PS<Subscript>5</Subscript>X (X = Cl,Br, I) solid electrolytes

All-solid-state rechargeable lithium-ion batteries (AS-LIBs) are attractive power sources for electrochemical applications due to their potentiality in improving safety and stability over conventional batteries with liquid electrolytes. Finding a solid electrolyte with high ionic conductivity and compatibility with other battery components is a key factor in raising the performance of AS-LIBs. In this work, we prepare argyrodite-type Li₆PS₅X (X = Cl, Br, I) using mechanical milling followed by annealing. X-ray diffraction characterization reveals the formation and growth of crystalline Li₆PS₅X in all cases. Ionic conductivity of the order of 7?×?10^?4 S cm^?1 in Li₆PS₅Cl and Li₆PS₅Br renders these phases suitable for AS-LIBs. Joint structure refinements using high-resolution neutron and laboratory X-ray diffraction provide insight into the influence of disorder on the fast ionic conductivity. Besides the disorder in the lithium distribution, it is the disorder in the S^2?/Cl^? or S^2?/Br^? distribution that we find to promote ion mobility, whereas the large I^? cannot be exchanged for S^2? and the resulting more ordered Li₆PS₅I exhibits only a moderate conductivity. Li⁺ ion migration pathways in the crystalline compounds are modelled using the bond valence approach to interpret the differences between argyrodites containing different halide ions.     

Ionic mobility in heptafluorozirconantes with a mixed cationic sublattice as probed by <Superscript>1</Superscript>H and <Superscript>19</Superscript>F NMR

The ionic mobility in heptafluorozirconates (NH₄)_2.7Rb_0.3ZrF₇ and (NH₄)_2.75Cs_0.25ZrF₇ has been studied by ¹H and ¹⁹F NMR in the temperature range 150–430 K. The types of ion motion were determined and their activation energies were estimated. A phase transition results in a modification in which diffusion in the ammonium sublattice and orientational disorder of ZrF₇³⁻ anions are observed. Owing to diffusion of ammonium ions, the compounds have relatively high ionic conductivity (σ ≥ 5 × 10⁻⁵ S/cm at 420 K).     

61<Superscript>ST</Superscript> ASMS Conference on Mass Spectrometry and Allied Topics

G-quadruplex nucleic acids can bind ammonium ions in solution, and these complexes can be detected by electrospray mass spectrometry (ESI-MS). However, because ammonium ions are volatile, the extent to which ESI-MS quantitatively could provide an accurate reflection of such solution-phase equilibria is unclear. Here we studied five G-quadruplexes having known solution-phase structure and ammonium ion binding constants: the bimolecular G-quadruplexes (dG₄T₄G₄)₂, (dG₄T₃G₄)₂, and (dG₃T₄G₄)₂, and the intramolecular G-quadruplexes dG₄(T₄G₄)₃ and dG₂T₂G₂TGTG₂T₂G₂ (thrombin binding aptamer). We found that not all mass spectrometers are equally suited to reflect the solution phase species. Ion activation can occur in the electrospray source, or in a high-pressure traveling wave ion mobility cell. When the softest instrumental conditions are used, ammonium ions bound between G-quartets, but also additional ammonium ions bound at specific sites outside the external G-quartets, can be observed. However, even specifically bound ammonium ions are in some instances too labile to be fully retained in the gas phase structures, and although the ammonium ion distribution observed by ESI-MS shows biases at specific stoichiometries, the relative abundances in solution are not always faithfully reflected. Ion mobility spectrometry results show that all inter-quartet ammonium ions are necessary to preserve the G-quadruplex fold in the gas phase. Ion mobility experiments, therefore, help assign the number of inner ammonium ions in the solution phase structure.      

聚合物固体电解质中的离子状态与导电机理的研究

制备得到了一种新颖的聚氨酯和丙烯酸酯复合梳形交联聚合物 (Combcross linkedpolymer) ,并以此聚合物为基体加入不同含量的高氯酸锂盐制得一系列聚合物固体电解质 ,其室温电导率可以达到 3 4× 10 - 5S·cm- 1 .通过Raman、DSC、SEM及电性能等研究了电解质中的盐浓度与离子存在状态及离子电导率之间的关系 .结果显示随着盐浓度的增加 ,聚合物固体电解质中离子对的比例和电导率都迅速增加 ,说明离子对 (由多个醚氧原子、阴离子和阳离子组成 )对体系导电起着积极的作用 .     

Environmentally Benign,Intrinsically Coordinated,Lithium-Based Solid Electrolyte with a Modified Purine as Supporting Ligand

Bioinspired materials have become increasingly competitive for electronic applications in recent years owing to the environment-friendly alternatives they offer. The notion of biocompatible solid organic electrolytes addresses the issues concerning potential leakage of corrosive liquids, volatility and flammability of electrolyte solvents. This study presents a new intrinsically coordinated Li^I adenine complex that exhibits electrical conductivity as a solid electrolyte capable of self-sustained supply of Li^I ions. It exhibits conductivity through moisture-assisted Li^I ion motion up to 373 K, and possibly by an ion-hopping mechanism beyond 373 K. This purine-derived solid electrolyte shows enhanced conductivity and transference number demonstrating the potential of purine-based ligands and their coordination complexes in interesting materials applications.     

Energetic ion bombardment of Ag surfaces by C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> and Ga<Superscript>+</Superscript> projectiles

The ion bombardment-induced release of particles from a metal surface is investigated using energetic fullerene cluster ions as projectiles. The total sputter yield as well as partial yields of neutral and charged monomers and clusters leaving the surface are measured and compared with corresponding data obtained with atomic projectile ions of similar impact kinetic energy. It is found that all yields are enhanced by about one order of magnitude under bombardment with the C60+ cluster projectiles compared with Ga+ ions. In contrast, the electronic excitation processes determining the secondary ion formation probability are unaffected. The kinetic energy spectra of sputtered particles exhibit characteristic differences which reflect the largely different nature of the sputtering process for both types of projectiles. In particular, it is found that under C60+ impact (1) the energy spectrum of sputtered atoms peaks at significantly lower kinetic energies than for Ga+ bombardment and (2) the velocity spectra of monomers and dimers are virtually identical, a finding which is in pronounced contrast to all published data obtained for atomic projectiles. The experimental findings are in reasonable agreement with recent molecular dynamics simulations.     

Self‐Healable Solid Polymeric Electrolytes for Stable and Flexible Lithium Metal Batteries

The key issue holding back the application of solid polymeric electrolytes in high‐energy density lithium metal batteries is the contradictory requirements of high ion conductivity and mechanical stability. In this work, self‐healable solid polymeric electrolytes (SHSPEs) with rigid‐flexible backbones and high ion conductivity are synthesized by a facile condensation polymerization approach. The all‐solid Li metal full batteries based on the SHSPEs possess freely bending flexibility and stable cycling performance as a result of the more disciplined metal Li plating/stripping, which have great implications as long‐lifespan energy sources compatible with other wearable devices.     

Aspects of molecular design of conducting polymers

A review discussion of the facts and factors to be considered in the molecular design of conducting polymers is presented. Topics discussed are: molecular properties and solid state properties; towards high conductivity— conjugation length and chain orientation; counter ions and ion exchange; materials design—solubilization, processability and molecular composites.     

Fluorine‐Doped Antiperovskite Electrolyte for All‐Solid‐State Lithium‐Ion Batteries

A fluorine‐doped antiperovskite Li‐ion conductor Li₂(OH)X (X=Cl, Br) is shown to be a promising candidate for a solid electrolyte in an all‐solid‐state Li‐ion rechargeable battery. Substitution of F^? for OH^? transforms orthorhombic Li₂OHCl to a room‐temperature cubic phase, which shows electrochemical stability to 9 V versus Li⁺/Li and two orders of magnitude higher Li‐ion conductivity than that of orthorhombic Li₂OHCl. An all‐solid‐state Li/LiFePO₄ with F‐doped Li₂OHCl as the solid electrolyte showed good cyclability and a high coulombic efficiency over 40 charge/discharge cycles.     

Some factors responsible for high ionic conductivity in simple solid compounds

The ionic conductivities, activation energies for mobility, and crystal structures of solid electrolytes are reviewed. The high conductivity of a group of compounds containing simple anions is examined in some detail.For a solid to possess high ionic conductivity there must be: (a) an excess of acceptable lattice sites for the mobile ion, (b) only a small energy difference between the ordered and disordered distribution of the mobile ions over these sites, and (c) a low heat of activation for movement of the mobile ion. These conditions are most readily realized when the cations are monovalent and stable in both 4-coordinated (tetrahedral) and 3-coordinated configurations. Since only Ag^I and Cu^I satisfy these requirements, their nearly unique conduction properties become understandable. Moreover, these requirements appear to be satisfied only with highly polarizable anions; a characteristic of the anions present in the good conductors.     

Kinetics of H<Superscript>+</Superscript>/Me<Superscript>+</Superscript> (Me = Na,K) ion exchange in polyantimonic acid

The kinetics of ion exchange in polyantimonic acid (PAA) with the composition of Sb₂O₅ · 3.2H₂O are studied. It is shown that sodium and potassium ions replace mobile proton groups and are located in channels of the PAA crystal structure. Diffusion coefficients are calculated in the approximation of the spheric grain model on the basis of the ion exchange data.     

A comparison of modifications induced by Li<Superscript>3+</Superscript> and Ag<Superscript>8+</Superscript> ion beams irradiation in poly(lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide) films

Poly(lactide-co-glycolide) (PLGA) films were irradiated by 180 MeV/amu Ag⁸⁺ ions and 50 MeV/amu Li³⁺ ions at different fluences of 5 × 10¹⁰, 5 × 10¹¹ and 1 × 10¹² ions/cm². Modifications of polymer films induced by the swift heavy ions (SHI) irradiation were studied by X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR) and UV–Vis spectroscopy. The dominant effect of the SHI beam irradiation is proposed to be chain scission which leads to breakage of polymer chains, followed by hydrogen abstraction. The results from FTIR spectroscopy showed that the intensity of all peaks of the irradiated samples decreased at high fluence of SHI, suggesting PLGA samples significantly degraded at high SHI fluence. The variation in optical band gap energy and Urbach energy with increasing fluence was calculated from UV–Vis spectroscopy and explained in terms of changes occurring in the polymer matrix. X-ray diffraction patterns also show appreciable changes in PLGA at high fluence. FESEM results revealed that the hydrophilicity of the PLGA surface increased with an increase in ion fluence. In this paper the optical, chemical and structural changes with different fluence rates are discussed.     

A 3D Organically Synthesized Porous Carbon Material for Lithium‐Ion Batteries

We report the first organically synthesized sp–sp³ hybridized porous carbon, OSPC‐1. This new carbon shows electron conductivity, high porosity, the highest uptake of lithium ions of any carbon material to‐date, and the ability to inhibit dangerous lithium dendrite formation. The new carbon exhibits exceptional potential as anode material for lithium‐ion batteries (LIBs) with high capacity, excellent rate capability, long cycle life, and potential for improved safety performance.     

Helical ternary complexes of alkaline earth picrates with open-chain crown ether

Much attention has been paid to the amide-type open-chain crown ethers with versatile mo-lecular structures because of their characteristic physical and chemical properties. These types of ligands have been used successfully as the active materials for ion-selective electrodes and the extractants for metal ions[1—5]. Among these ligands, N,N,N′,N′-tetraphenyl-3,6,9-trioxaun- decanediamide (TTD) shows the high extractabilities for Sr2+, Ba2+ and rare earth ions and the good selectivity to…     

Hydration of the H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, and Cs<Superscript>+</Superscript> ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes modified with inorganic dopants

The hydration, state, and mobility of protons and Li⁺, Na⁺, and Cs⁺ ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes doped with silicon dioxide and phosphotungstic acid have been investigated by NMR and impedance spectroscopy. The dopants increase the moisture content of the membrane and change the system of pores and channels in which ion transport takes place. At low humidities, the dopant particles are involved in ion transport. The greatest effect is observed for the membranes doped with both SiO₂ and phosphotungstic acid. The water molecules sorbed by dopant particles as a material participate in the hydration of alkali metal cations in the membrane.     

Inorganic functional materials: optimization of properties by structural and compositional control

A review is given of the strategies used to dope inorganic solids and the consequences for properties such as ionic and electronic conductivity. Doping mechanisms involve either substitution of foreign ions onto lattice sites, creation of vacancies on either cation or anion sites, or population of normally empty interstitial sites by either anions or cations. Mechanisms for charge compensation associated with aliovalent doping are reviewed and examples are given in the fields of solid state ionics and high-temperature superconductivity. The strategies used for targeting materials with new properties are reviewed, including a surprising number of cases where startling new properties are encountered in well-known materials. Specific examples discussed include MgB2 superconductor, Na beta-alumina sodium ion conductor, Ca12Al14O33 oxide ion conductor, LiCoMnO4 lithium battery cathode, doped Li4SiO4 tunable lithium ion conductor, and La-doped BaTiO3 ferroelectric, which can be either semiconducting or insulating. Examples are also given of a curious observation that extraordinary properties are often encountered in materials that are on the edge of stability, either structurally or compositionally or at the crossover between different property types.