超细粒子铜基甲醇触媒的HREM研究

超细粒子铜基甲醇触媒的ＨＲＥＭ研究顾永达，吕剑，戴丽珍（中国科学院山西煤炭化学研究所煤转化国家重点实验室太原０３０００１）于瀛大，关若男（中国科学院金属研究所固体原子象开放实验室沈阳１１００１５）关键词超细粒子，铜基触媒，高分辨电镜近十余年来，超细粒...     

甲醇水蒸气重整制氢Cu/ZnO/Al2O3催化剂的研究

燃料电池作为一种无污染、高效率的能源引起世界各大汽车公司的广泛关注[1,2]。用于燃料电池的燃料目前研究较多的是氢气,用氢气作燃料存在储存、安全、运输等问题,寻求合适贮氢方法或替代燃料,实现车载制氢是解决问题的办法。甲醇作为液体燃料,因具有高能量密度,低碳含量,以及运输和贮存等优势成为车载制氢的理想燃料,甲醇水蒸气重整制氢反应也成为研究的热点[3～10]。车载制氢对甲醇水蒸气重整制氢反应体系中的产氢速率,氢气和CO的含量都有一定的要求。尤其对CO含量要求更为苛刻,因CO易引起燃料电池阳极催化剂中毒[11,12]。因此,开…     

负载型ZnO/SiO2及ZnO-SiO2溶胶凝胶催化剂的表面结构研究

催化剂的表面结构不仅影响催化剂的催化活性, 而且还影响反应产物的选择性[1]. 制备催化剂的方法不同, 其表面结构及表面性质也不同[2~4]. 浸渍法简单实用, 有利于得到高分散、晶粒细小的高比表面催化剂, 而溶胶-凝胶法则由于其制备温度较低, 易于形成无定形的或介态的氧化物相[5]而可达到分子级的混合, 其活性组分能有效地嵌入网状结构中, 不易受外界的影响而聚集或长大, 因此对催化剂的稳定性更为有利[6,7].     

Structural,optical, electrical,and photocatalytic properties of manganese doped zinc oxide nanocrystals

Manganese-doped and undoped ZnO nanocrystals were synthesized via wet-chemical methods. The structure, physico-chemical, electrical and optical properties of the as-prepared products were characterized by using the X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PLS) and electrochemical impedance spectroscopy (EIS) techniques. The photocatalytic activity of Mn-doped ZnO nanocrystal (mixed phases) has been examined under the visible-irradiation by using photocatalytic oxidation of rhodamine B (RhB) dye as a model reaction, and compared with that of known system such as pure ZnO nanocrystal (single-phase). The results showed that Mn doped ZnO nanocrystals bleaches RhB much faster than undoped ZnO upon its exposure to the visible light. The enhancement of the photocatalytic activity was discussed as an effect due to the Mn doping in the Mn-doped ZnO semiconductors, which shifts the optical absorption edge to the visible region and alters the electron-hole pair separation conditions. These factors are responsible for the higher photocatalytic performance of Mn/ZnO composites.     

ZrO2晶相对ZnO/ZrO2+SAPO-34双功能催化剂上合成气制烯烃反应的影响

烯烃是重要的化工原料,目前主要通过石油催化裂化得到.随着石油资源的消耗以及人们对烯烃需求的日益增长,开发非石油路线制取烯烃势在必行.合成气可以从煤、天然气和生物质等获得,由合成气作为重要的C1平台分子一步制取烯烃(STO)的过程受到了广泛关注.将合成气制甲醇/二甲醚的金属催化剂与甲醇制烯烃的分子筛催化剂耦合得到的混合双...     

Enhanced CO sensing properties of Pd modified ZnO porous nanosheets

Noble metal is usually used to improve the gas sensing performance of metal oxide semiconductor (MOS) due to its better catalytic properties. In this work, we reported a synthesis of Pd/ZnO nanocomposite by an in situ reduction with ascorbic acid (AA). It was found that Pd/ZnO sensor has excellent selectivity to CO and the response of the Pd/ZnO sensor towards 100 ppm CO was as high as 15 (R_a/R_g), obviously higher than that of the pristine ZnO sensor (1.4) when the working temperature is 220 °C. Moreover, the pure ZnO sensor almost has no selectivity to CO, but the Pd/ZnO sensor has excellent selectivity to CO, which may be ascribed to the electronic sensitization of Pd. Our present results demonstrate that the Pd can significantly improve the gas-sensing performance of metal oxide semiconductor and the obtained sensor has great potential in monitoring coal mine gas.     

Mo对Ni/ZnO催化乙醇水蒸气重整制氢性能的影响

考察了Mo及温度对Ni/ZnO催化乙醇水蒸气重整制氢的活性、选择性和抗积炭性能的影响。结果表明,773K适量添加Mo能提高Ni/ZnO催化剂的活性和氢气选择性;Ni/ZnO及Ni-Mo/ZnO催化剂的活性随着温度的升高而提高,823K乙醇完全转化;873K时,Mo质量分数为0.83%的Ni-Mo/ZnO催化剂对氢气的选择性最高;添加Mo可以提高Ni/ZnO催化剂的抗积炭能力,从而提高该催化剂的稳定性。程序升温还原（TPR）和X射线衍射（XRD）结果表明,添加Mo有利于Ni氧化物在载体上的分散;减弱氧化态镍物种与载体之间的作用,从而提高了催化剂的活性、选择性和稳定性。     

ZnO对Au-Pd/CeO_2催化剂甲醇部分氧化制氢性能的影响

采用沉积沉淀法制备了Au-Pd双金属催化剂, 研究了ZnO对Au-Pd/CeO_2催化剂甲醇部分氧化性能的影响, 并运用N_2吸附、 XRD、 UV-Vis、 TPR、 H2-TPD和CO-IR等手段对催化剂进行了表征. 结果表明, ZnO的引入减少了Pd活性中心, 降低了催化剂的活性, 但提高了催化剂H2选择性和降低了CO选择性. Au-Pd/ZnO-CeO_2催化剂的TPR表明, 在约200℃时开始有部分ZnO被还原, CO-IR显示CO吸收峰移向低频, 这些结果表明Au-Pd/ZnO-CeO_2催化剂中Pd和Zn之间发生了相互作用. Pd和Zn之间相互作用抑制了Pd的甲醇分解活性, 有利于H2和CO_2的生成, 使Au-Pd/ZnO-CeO_2催化剂表现出较高的H2选择性和较低的CO选择性.     

原位生长的α-Fe2O3/ZnO异质纳米棒阵列对乙醇气体的高选择性检测

采用两步溶液法在陶瓷管上原位生长了ZnO纳米棒阵列,然后以ZnO纳米棒为载体,通过水热法在其表面负载α-Fe₂O₃纳米粒子,生成异质α-Fe₂O₃/ZnO复合纳米材料。 α-Fe₂O₃/ZnO纳米棒直径30~80 nm,长1 μm左右,交叉排列形成纳米棒阵列,α-Fe₂O₃纳米粒子粒径约10 nm,均匀分布在ZnO纳米棒表面。 将纯ZnO和α-Fe₂O₃/ZnO纳米棒阵列制成气敏元件,测试并对比了2种气敏元件的气敏性能,揭示其气敏机理。 结果表明:α-Fe₂O₃纳米粒子的复合显著提高了ZnO纳米棒阵列对乙醇气体的灵敏度和选择性,在工作温度370 ℃时,对100 μL/L乙醇气体的响应值为85.4,是同条件下ZnO器件对乙醇响应值(9.4)的9.1倍,响应时间7 s,最低检出限为0.01 μL/L。 相关研究可以应用于痕量乙醇的快速、高灵敏度和高选择性检测。     

Metal oxide-modified ZnO/SiO <Subscript>2</Subscript> catalysts for cyclo-dehydrogenation of ethylenediamine with propyleneglycol to 2-methylpyrazine

Metal oxide-modified ZnO /SiO2 catalysts were studied for the cyclo-dehydrogenation of ethylenediamine with propyleneglycol to 2-methylpyrazine at 633 K. The ZnO/SiO₂ catalyst showed fairly good ethylenediamine conversion and quantitative propyleneglycol conversion with about 60 mol% of 2-methylpyrazine selectivity, which is due to the existence of large amount of unconverted intermediate, 2-methylpiperazine. Metal oxide (CuO, NiO, Co₃O₄)-modified ZnO/SiO₂ catalysts were prepared to facilitate the dehydrogenation of 2-methylpiperazine to 2-methylpyrazine. About 82 mol% of 2-methylpyrazine selectivity was achieved on CuO and Co₃O₄ modified ZnO/SiO₂ catalysts, with significant increases of pyrazine selectivity. The catalytic properties of the metal oxidemodified ZnO/SiO₂ catalysts, pretreated with hydrogen gas as in the cyclo-dehydrogenation, were compared using the well-known probe reaction, the dehydrogenation/ dehydration of cyclohexanol to cyclohexanone or phenol/cyclohexene. The selectivities of pyrazine in the cyclo-dehydrogenation on the metal oxide-modified ZnO/SiO₂ catalysts were correlated with the phenol selectivities of the probe reaction. It is proposed that the metallic site of catalyst is responsible for the formation of pyrazine from ethylenediamine dimerization. The improved 2-methylpyrazine yield on CuO/ZnO/SiO₂ catalyst was explained by the proper adjustment of catalytic properties, which could be differentiated by the phenol selectivity in the cyclohexanol probe reaction. Thus, the large enhancement of 2-methylpiperazine dehydrogenation to 2-methylpyrazine and the suppression of excess pyrazine formation are supposed to occur on the metallic Cu formed in situ during the reaction during the cyclo-dehydrogenation of ethylenediamine with propyleneglycol.     

CO2选择性氧化甲烷制C2烃催化剂La2O3/ZnO的氧化还原和CO2吸附性能

Ｌａ２Ｏ３／ＺｎＯ催化剂体系在以二氧化碳作为氧化剂的甲烷氧化偶联反应中具有很高的Ｃ２烃选择性和稳定性．采用ＣＯ２－ＴＰＤ－ＭＳ和ＴＰＲ技术考察了Ｌａ２Ｏ３／ＺｎＯ对ＣＯ２的吸附性质及其氧化还原行为．结果表明：（１）Ｌａ２Ｏ３／ＺｎＯ催化剂体系存在着强、弱两种碱中心，其中弱碱中心数量随样品中Ｌａ２Ｏ３含量增加而减少，强碱中心强度随样品中Ｌａ２Ｏ３含量增加而增强．（２）由于组分相互作用，高温下，Ｌａ２Ｏ３／ＺｎＯ易产生晶格氧空位，使之对ＣＯ２的吸附增强，吸附后的ＣＯ２与晶格氧作用形成立方晶型Ｌａ２Ｏ２ＣＯ３．（３）Ｌａ２Ｏ３／ＺｎＯ表面的Ｌａ３＋和Ｚｎ２＋可以部分被还原，由于组分间的相互作用，使得二者的还原都较单一组分存在时更难．（４）Ｈ２－ＣＯ２－Ｈ２氧化还原循环实验表明，Ｌａ２Ｏ３／ＺｎＯ表面被部分还原后，ＣＯ２可以将部分被还原的表面再氧化．在此基础上对Ｌａ２Ｏ３／ＺｎＯ催化剂上甲烷与ＣＯ２转化为Ｃ２烃的机制也进行了讨论．     

苯中硫在Ni/ZnO催化剂上加氢吸附脱除的研究

比较了浸渍法与共沉淀法制备的Ni/ZnO催化剂对芳烃原料的深度脱硫活性和选择性,并采用H₂-TPR、XRD和BET等手段对催化剂进行了表征。结果表明,NiO与载体ZnO之间的相互作用程度对催化剂的性能有很大影响。与ZnO相互作用较弱的游离态NiO还原后生成的Ni⁰,导致苯加氢生成环己烷;与ZnO相互作用较强的NiO还原后生成的Ni⁰具有脱硫能力但不是苯加氢活性中心。共沉淀法制备的催化剂由于NiO与载体相互作用较强,游离态NiO较少,且比表面积相对较大,因而具有较高的活性和选择性。同时发现,还原温度对催化剂的性能具有很大影响,在400℃还原时开始出现Ni_xZn_y合金,且随着还原温度的升高,晶粒长大,比表面积降低,导致催化剂活性降低。Sn助剂的加入能增加NiO与载体的相互作用,抑制游离态的NiO生成,从而减少苯的损失。     

Structural,thermal, dielectric and optical behaviour investigations of water-free ZnO/lyotropic liquid crystal nanocolloids

ABSTRACT

Zinc oxide (ZnO) nanoparticles of spherical symmetry (average size of ≈ 20 nm) have been synthesised via a non-aqueous lyotropic liquid crystalline (LLC) templating process. Lyotropic liquid crystalline nanocolloids are prepared via dispersing 0.05, 0.1 and 0.5 wt.% ZnO nanoparticles in non-aqueous lyotropic phase. No structural phase change has been seen with the doping of nanoparticles as stable lamellar phases are observed in all the cases. Stability of the lamellar structure and orientation of the ZnO nanoparticles in the liquid crystalline matrix may be attributed to the interfacial surface charge interactions. A significant increase and pronounced dispersion in dielectric permittivity of the ZnO/LLC nanocolloids could be the result of parallel coupling among guest/host, higher dipole- moment of the ZnO nanoparticles and Maxwell-Wagner polarisation. The variation of relaxation parameters has also been discussed and correlated with the dielectric and structural parameters. ZnO/lyotropic nanocolloids devices exhibit dc conductivity of the order of 10^?5S/m owing to the increase in the number of ions (of the order of 10¹⁹m^?3) in the doped systems. Nanocolloids exhibits, the refractive index of range 1.40 to 1.45 and the wide bandgap of the range 4.1–4.5 eV.     

Synthesis of layered zinc hydroxide chlorides in the presence of Al(III)

Zinc hydroxide chloride particles were synthesized by hydrolysis of ZnCl₂ solutions dissolving AlCl₃ at different atomic Al/Zn ratios from 0 to 1.0 and characterized by various techniques. Increasing Al/Zn ratio changed the crystal phases of the products as ZnO→ZnO+ZHC (Zn₅(OH)₈Cl₂·H₂O)→ZHC→LDH (layered double hydroxides, Zn-Al-Cl) and the particle morphology as agglomerates (ZnO)→fine particles (ZnO)→plates (ZHC)+rods (ZnO)→plates (ZHC)→plates (LDH). The atomic Cl/Zn ratios of LDH particles formed at Al/Zn?0.3 were ca. 0.3 despite the increase of Al/Zn ratio, being due to the intercalation of CO₃²⁻ into the LDH crystal. The OH⁻ content of LDH estimated by TG was reduced by the deprotonation of OH⁻ to counteract the excess positive charge produced by replacing Zn(II) with Al(III). ZHC exhibited a high adsorption selectivity of H₂O.     

Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO催化剂的制备与表征

采用浸渍法对无定形ZnO分别用稀H2SO4和(NH4)2S2O8溶液处理, 制备了SO42-/ZnO和S2O82-/ZnO固体酸. 通过固体离子交换法制备了Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO两种催化剂, 并采用XRD, FTIR, TPD和TPR等进行了表征. 研究结果表明, 用稀H2SO4和(NH4)2S2O8溶液分别浸渍处理无定形ZnO, 经过500-600 ℃高温焙烧后得到的SO42-/ZnO和S2O82-/ZnO固体酸表面形成了Zn3O(SO4)2物种; py-FTIR结果表明, 两者均具有B酸中心和L酸中心, 进一步的NH3-TPD研究结果证明, 制备的固体酸NH3脱附峰均出现在543 ℃附近, 属于高强度固体酸. 结构分析认为, 由于SO42-强烈的电子诱导作用, SO42-和ZnO形成的桥式配位物种产生了B酸中心和L酸中心, 而其螯合配位形成的物种没有酸性. SO42-/ZnO和S2O82-/ZnO固体酸与CuCl进行离子交换所制备的Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO催化剂的Cu(Ⅰ)易于还原, 对甲醇氧化羰基化合成碳酸二甲酯(DMC)表现出较高的活性和选择性, DMC选择性为98.3%, 时空收率可达到1.9 g(g·h).     

KF改性负载铜催化剂在Heck反应上的应用

KF水溶液浸渍MgO或ZnO载体为改性载体制备了负载铜催化剂,以卤苯与丙烯酸正丁酯的反应为模型,考察了对Heck反应的催化性能。结果表明,对碘苯与丙烯酸正丁酯的Heck反应的催化性能,未改性催化剂基本没有活性,而改性后,10%Cu/5%KF/ZnO、20%Cu/10%KF/ZnO催化剂的催化转化率为100%和反式异构体的选择性为98%以上。改性催化剂10%Cu/5%KF/ZnO对于对-硝基溴苯与丙烯酸正丁酯的Heck反应的转化率为34.3%。该催化剂重复使用4次仍有较高催化活性,如20%Cu/10%KF/ZnO为65.4%。催化剂的XRD分析表明,改性剂的加入可提高催化剂表面CuO的含量而提高催化性能。     

Hierarchically Structure SnO2/ZnO Nanocomposites: Preparation,Growth Mechanism and Gas Sensing Property

SnO₂/ZnO nanocomposite was synthesized from mixed ethanol and water systems and the ethanol-sensing properties of sensors based on SnO₂/ZnO were investigated. The structure and morphology of the products was characterized by x-ray diffraction (XRD) and a field emission scanning electron microscope (FE-SEM). The results showed that the diameter of the liked pine needle SnO₂ was about 40 nm with a length about 300 nm, which are uniformly dispersed on the surface of the ZnO nanosheets. The growth process of the SnO₂/ZnO nanocomposite was discussed. The results of gas sensing properties of SnO₂/ZnO nanocomposite sensor showed high and quick response to ethanol vapor at 5.0 v. This sensor showed the advantages of high selectivity, strong stability, and prompt response/recovery characteristics in detecting ethanol vapor at 5.0 v.     

利用ZnO@ZIF-8核壳结构构建高选择性、高稳定性的Pd/ZnO催化剂用于CO2加氢制甲醇

Catalytic CO₂ hydrogenation to methanol is a promising route to mitigate the negative effects of anthropogenic CO₂. To develop an efficient Pd/ZnO catalyst, increasing the contact between Pd and ZnO is of the utmost importance, because "naked" Pd favors CO production via the reverse water-gas shift path. Here, we have utilized a ZnO@ZIF-8 core-shell structure to synthesize Pd/ZnO catalysts via Pd immobilization and calcination. The merit of this method is that the porous outer layer can offer abundant "guest rooms" for Pd, ensuring intimate contact between Pd and the post-generated ZnO. The synthesized Pd/ZnO catalysts (PZZ8-T, T denotes the temperature of calcination in degree Celsius) is compared with a ZnO nanorod-immobilized Pd catalyst (PZ). When the catalytic reaction was performed at lower reaction temperatures (250, 270, and 290 ℃), the highest methanol space time yield (STY) and highest STY per Pd achieved by PZ at 290 ℃ were 0.465 g g_cat^-1 h^-1 and 13.0 g g_Pd^-1 h^-1, respectively. However, all the PZZ8-T catalysts exhibited methanol selectivity values greater than 67.0% at 290 ℃, in sharp contrast to a methanol selectivity value of 32.8% for PZ at the same temperature. Thus, we performed additional investigations of the PZZ8-T catalysts at 310 and 360 ℃, which are unusually high temperatures for CO₂ hydrogenation to methanol because the required endothermic reaction is expected to be severely inhibited at such high temperatures. Interestingly, the PZZ8-T catalysts were observed to achieve a methanol selectivity value of approximately 60% at 310 ℃, and PZZ8-400 was observed to maintain a methanol selectivity value of 51.9% even at a temperature of 360 ℃. Thus, PZZ8-400 attains the highest methanol STY of 0.571 g g_cat^-1 h^-1at 310 ℃. For a better understanding of the structure-performance relationship, we characterized the catalysts using different techniques, focusing especially on the surface properties. X-ray photoelectron spectroscopy (XPS) results indicated a linear relationship between the methanol selectivity and the surface PdZn : Pd ratio, proving that the surface PdZn phase is the active site for CO₂ hydrogenation to methanol. Furthermore, analysis of the XPS O 1s spectrum together with the electronic paramagnetic resonance results revealed that both, the oxygen vacancy as well as the ZnO polar surface, played important roles in CO₂ activation. Chemisorption techniques provided further quantitative and qualitative information regarding the Pd-ZnO interface that is closely related to the CO₂ conversion rate. We believe that our results can provide insight into the catalytic reaction of CO₂ hydrogenation from the perspective of surface science. In addition, this work is an illustrative example of the use of novel chemical structures in the fabrication of superior catalysts using a traditional formula.     

Chromatographic characterization of hydrophilic interaction liquid chromatography stationary phases: hydrophilicity, charge effects, structural selectivity, and separation efficiency

Fourteen commercially available particle-packed columns and a monolithic column for hydrophilic interaction liquid chromatography (HILIC) were characterized in terms of the degree of hydrophilicity, the selectivity for hydrophilic-hydrophobic substituents, the selectivity for the regio and configurational differences in hydrophilic substituents, the selectivity for molecular shapes, the evaluation of electrostatic interactions, and the evaluation of the acidic-basic nature of the stationary phases using nucleoside derivatives, phenyl glucoside derivatives, xanthine derivatives, sodium p-toluenesulfonate, and trimethylphenylammonium chloride as a set of samples. Principal component analysis based on the data of retention factors could separate three clusters of the HILIC phases. The column efficiency and the peak asymmetry factors were also discussed. These data on the selectivity for partial structural differences were summarized as radar-shaped diagrams. This method of column characterization is helpful to classify HILIC stationary phases on the basis of their chromatographic properties, and to choose better columns for targets to be separated. Judging from the retention factor for uridine, these HILIC columns could be separated into two groups: strongly retentive and weakly retentive stationary phases. Among the strongly retentive stationary phases, zwitterionic and amide functionalities were found to be the most selective on the basis of partial structural differences. The hydroxyethyl-type stationary phase showed the highest retention factor, but with low separation efficiency. Weakly retentive stationary phases generally showed lower selectivity for partial structural differences.     

Reactive adsorption of thiophene on Ni/ZnO adsorbent：Effect of ZnO textural structure on the desulfurization activity

To better understand the nature of reactive adsorption of thiophene on Ni/ZnO adsorbent, the effect of ZnO textural structure on the desulfurization activity was investigated. ZnO materials were synthesized by low-temperature solid-state reaction and the corresponding Ni/ZnO adsorbents were prepared by incipient impregnation method. The analysis results showed that the crystalline sizes of ZnO as-synthesized as well as the BET surface areas varied obviously with the calcination temperature. The activity evaluations indicated that the Ni/ZnO adsorbents prepared with ZnO possessed a favorable textural structure as active component exhibited good activity of removing thiophene. The evolutions of the main crystalline phases of Ni/ZnO adsorbents before and after reaction confirmed that ZnO played a crucial role in taking up S element and converting it into ZnS in the reactive adsorption process. It was concluded that ZnO with larger surface area and smaller crystal particles resulted in better desulfurization activity, which may be the main reason for the different activities of the Ni/ZnO adsorbents prepared with ZnO calcined at different temperatures.