纳米银催化氧化偶联硫醇制二硫化物

采用多元醇为溶剂和还原剂制备了聚乙烯吡咯烷酮(PVP)保护的纳米银,并将其用于催化正十二烷基硫醇氧化偶联反应.质谱、红外光谱、拉曼光谱和核磁共振氢谱表征结果表明所得产物为二硫化物.考察了反应时间、反应温度、催化剂和水的用量等对正十二烷基硫醇氧化偶联反应的影响,从而得出优化的反应条件:0.157mmolPVP保护的纳米银,20μl水,100℃下反应3h.此外,进一步将PVP保护的纳米银用于正丁硫醇和正辛硫醇的氧化偶联反应,也得到了相应的二硫化物.     

Poly(N‐vinylpyrrolidone)‐Decorated Reduced Graphene Oxide with ZnO Grown In Situ as a Cathode Buffer Layer for Polymer Solar Cells

A ZnO@reduced graphene oxide–poly(N‐vinylpyrrolidone) (ZnO@RGO‐PVP) nanocomposite, prepared by in situ growth of ZnO nanoparticles on PVP‐decorated RGO (RGO‐PVP) was developed as a cathode buffer layer for improving the performance of polymer solar cells (PSCs). PVP not only favors homogeneous distribution of the RGO through the strong π–π interactions between graphene and PVP molecules, but also acts as a stabilizer and bridge to control the in situ growth of sol–gel‐derived ZnO nanoparticles on the surface of the graphene. At the same time, RGO provides a conductive connection for independent dispersion of ZnO nanoparticles to form uniform nanoclusters with fewer domain boundaries and surface traps. Moreover, the LUMO level of ZnO is effectively improved by modification with RGO‐PVP. Compared to bare ZnO, a ZnO@RGO‐PVP cathode buffer layer substantially reduces the recombination of carriers, increases the electrical conductivity, and enhances electron extraction. Consequently, the power conversion efficiency of an inverted device based on thieno[3,4‐b]thiophene/benzodithiophene (PTB7):[6,6]‐phenyl C₇₁‐butyric acid methyl ester (PC₇₁BM) with ZnO@RGO‐PVP as cathode buffer layer was greatly improved to 7.5 % with improved long‐term stability. The results reveal that ZnO@RGO‐PVP is universally applicable as a cathode buffer layer for improving the performance of PSCs.     

Au-induced polyvinylpyrrolidone aggregates with bound water for the highly shape-selective synthesis of silica nanostructures

Novel Au-induced polyvinylpyrrolidone (PVP) aggregates with bound water (PVP-water) were created for the highly shape-selective synthesis of distinctive silica nanostructures, such as core-shell spheres, rods, snakes, tubes, capsules, thornlike, and dendritic morphologies. A water/PVP/n-pentanol system was first designed to bind water to PVP, and then Au nanoparticles were used to induce the PVP-water species to aggregate into distinctive soft structures by exploiting the interplay between PVP and gold. This was confirmed by the IR absorption spectra. The bound water in the soft structures was consumed during the hydrolysis of tetraethylorthosilicate and the target silica nanostructures were obtained. The soft structures, and therefore, the silica morphologies, can be readily tuned by adjusting the experimental parameters. The tunable Au-induced PVP-water soft structures reported herein open up new dimensions for the synthesis of distinctive nanomaterials (other than silica) that have new physicochemical properties and applications. These soft structures were also successfully extended to synthesize ZnO and SnO(2) particles with remarkable shapes, such as spheres, leaves, T-shaped structures, and dendritic morphologies.     

Synthesis of pyridinecarboxaldimine grafted to magnetic nanoparticles (Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript>) and its application in the aerobic oxidation of primary alcohols catalyzed by CuBr<Subscript>2</Subscript>/TEMPO

A pyridinecarboxaldimine grafted to silica-coated magnetic nanoparticles was prepared. The structure and magnetic properties of the functionalized magnetic silica nanoparticles were identified by TEM, FT-IR, XRD, elemental analysis, and vibrating sample magnetometer (VSM). The supported pyridinecarboxaldimine as chelating ligand in combination with CuBr₂ and 2,2,6,6-tetramethyl-1-piperadoxyl (TEMPO) exhibited efficient catalytic performance in the aerobic oxidation of primary alcohols to aldehydes. The functionalized magnetic silica nanoparticles could be easily recovered using an external magnetic field and reused for at least 6 times with low reduction in its performance in the aerobic oxidation of benzyl alcohol.     

An efficient method for recovery of target ssDNA based on amino-modified silica-coated magnetic nanoparticles

In this paper, an improved recovery method for target ssDNA using amino-modified silica-coated magnetic nanoparticles (ASMNPs) is reported. This method takes advantages of the amino-modified silica-coated magnetic nanoparticles prepared using water-in-oil microemulsion technique, which employs amino-modified silica as the shell and iron oxide as the core of the magnetic nanoparticles. The nanoparticles have a silica surface with amino groups and can be conjugated with any desired bio-molecules through many existing amino group chemistry. In this research, a linear DNA probe was immobilized onto nanoparticles through streptavidin conjugation using covalent bonds. A target ssDNA(I) (5′-TMR-CGCATAGGGCCTCGTGATAC-3′) has been successfully recovered from a crude sample under a magnet field through their special recognition and hybridization. A designed ssDNA fragment of severe acute respiratory syndrome (SARS) virus at a much lower concentration than the target ssDNA(I) was also recovered with high efficiency and good selectivity.     

Synthesis and characterization of the water-soluble silica-coated ZnS:Mn nanoparticles as fluorescent sensor for Cu ions

Silica-coated ZnS:Mn nanoparticles were synthesized by coating hydrophobic ZnS:Mn nanoparticles with silica shell through microemulsion. The core–shell structural nanoparticles were confirmed by X-ray diffraction (XRD) patterns, high-resolution transmission electron microscope (HRTEM) images and energy dispersive spectroscopy (EDS) measurements. Results show that each core–shell nanoparticle contains single ZnS:Mn nanoparticle within monodisperse silica nanospheres (40 nm). Photoluminescence (PL) spectroscopy and UV–vis spectrum were used to investigate the optical properties of the nanoparticles. Compared to uncoated ZnS:Mn nanoparticles, the silica-coated ZnS:Mn nanoparticles have the improved PL intensity as well as good photostability. The obtained silica-coated ZnS:Mn nanoparticles are water-soluble and have fluorescence sensitivity to Cu²⁺ ions. Quenching of fluorescence intensity of the silica-coated nanoparticles allows the detection of Cu²⁺ concentrations as low as 7.3 × 10⁻⁹ mol L⁻¹, thus affording a very sensitive detection system for this chemical species. The possible quenching mechanism is discussed.     

可磁性回收纳米级负载型杂多酸催化剂用于水中生物活性化合物的绿色合成(英文)

12‐Tungstophosphoric acid supported on aerosil silica and silica‐coated γ‐Fe2O3 nanoparticles was prepared and characterized using transmission electron microscopy,scanning electron microscopy,and inductively coupled plasma atomic emission spectroscopy.The catalytic activity of the two prepared catalysts was compared in the synthesis of 1,8‐dioxo‐9,10‐diaryldecahydroacridines in water.12‐Tungstophosphoric acid was highly dispersed on the silica‐coated γ‐Fe2O3 nanoparticles and showed higher activity and a higher reuse number compared with the acid supported on aerosil silica.The catalyst could be recovered simply by using an external magnetic field and could be reused several times without appreciable loss of its catalytic activity.     

Hexadecyltriethoxysilane-induced Dispersions of Metal Oxide Nanoparticles in Nonpolar Solvents

Nanoparticles of CeO₂, Fe₃O₄, TiO₂ and ZnO get coated by hexadecyltriethoxysilane on refluxing the nanoparticles and the organosilane in a hydrocarbon solvent. The organosilane-coated metal oxide nanoparticles give stable dispersions in hydrocarbon solvents due to their hydrophobic surface. On heating in air, the organosilane-coated metal oxide nanoparticles yield to silica-coated core-shell type nanoparticles. Dedicated to Late Professor F. A. Cotton.     

Effects of Capping Agents on the Oxygen Reduction Reaction Activity and Shape Stability of Pt Nanocubes

We investigated the formation of Pt nanocubes (NCs) and their electrocatalytic oxygen reduction reaction (ORR) properties and structural stability using two different capping agents, namely, polyvinylpyrrolidone (PVP) and oleylamine (OAm). The mono-dispersity of the obtained Pt NCs and their interactions with PVP and OAm were analyzed by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Fourier-transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The TEM data show a high mono-dispersity (82 %) and a large mean particle size (9-10 nm) for the Pt NCs obtained by the oleylamine-assisted method compared to those prepared via the PVP-assisted procedure (68 %, 6–7 nm). FTIR, XPS, and TGA data show that PVP and OAm still remain at the Pt surface, despite washing. Interestingly, the OAm-capped Pt NCs show significantly higher electrochemically active surface area (ECSA) and ORR activity than the PVP-capped ones. An accelerated stress protocol, however, reveals that the OAm-capped NCs possess a poor structural stability during electrochemical cycling. The loss of a defined surface arrangement in the NCs is connected with a transformation into a near-spherical particle shape. In contrast, the PVP-capped NCs mainly retain their particle shape due to their strong capping behavior. In addition, we have developed a degradation model for NCs as a function of electrochemical parameters such as upper potential and cycle number. Altogether, we provide fundamental insights into the electronic interactions between capping agent and Pt NCs and the role of the adsorption strength of the capping agent in improving the electrochemical ORR performance as well as the structural stability of shape-controlled nanoparticles.     

基于金纳米聚集体的核壳型SERS探针及其细胞内应用

利用金纳米粒子的聚集体作为表面增强拉曼散射（Surface enhanced Raman scattering,SERS）的增强基底,合成了一种二氧化硅包裹的核壳型SERS探针,并成功将该探针应用于活细胞的SERS光谱探测.实验中利用4-巯基苯甲酸（4-mercaptobenzoicacid,4MBA）作为拉曼标记物,...     

Control of shell thickness in silica-coating of Au nanoparticles and their X-ray imaging properties

This paper describes a performance of precise control of shell thickness in silica-coating of Au nanoparticles based on a sol-gel process, and an investigation into X-ray imaging properties for the silica-coated Au (Au/SiO(2)) particles. The Au nanoparticles with a size of 16.9±1.2 nm prepared through a conventional citrate reduction method were used as core particles. The Au nanoparticles were silica-coated with a sol-gel reaction using tetraethylorthosilicate (TEOS) as a silica source, sodium hydroxide (NaOH) as a catalyst, and (3-aminopropyl) trimethoxysilane (APMS) as a silane coupling agent. An increase in TEOS concentration resulted in an increase in shell thickness. Under certain concentrations of Au, H(2)O, NaOH, and APMS, the Au/SiO(2) particles with silica shell thickness of 6.0-61.0 nm were produced with varying TEOS concentration. Absorption peak wavelength of surface plasmon resonance of the Au/SiO(2) colloid solution depended on silica shell thickness, which agreed approximately with the predictions by Mie theory. The as-prepared colloid solution could be concentrated up to an Au concentration of 0.19 M with salting-out and centrifugation. The concentrated colloid solution showed an X-ray image with high contrast, and a computed tomography value for the colloid solution with an Au concentration of 0.129 M was achieved 1329.7±52.7 HU.     

氨基化单分散量子点/二氧化硅核壳纳米粒子的制备及其细胞标记

通过反向微乳液法, 在油溶性量子点表面包裹二氧化硅外壳, 使油溶性量子点水溶性化, 再利用3-氨丙基三乙氧基硅烷(APTES)在已形成的二氧化硅纳米颗粒表面进行氨基化改性, 制备富含氨基的二氧化硅包裹的量子点荧光纳米球. 通过透射电子显微镜(TEM)、粒径分析、zeta电位检测、紫外-可见分光光度、荧光分光光度和红外光谱等手段对产品进行了表征. 结果表明, 所制备的二氧化硅量子点纳米球(45 nm)具有单分散性、水溶性好及光化学稳定性强等优点. 通过静电作用, 所制备的单分散氨基化二氧化硅量子点对肿瘤细胞表面膜电荷进行了初步标记显像.     

Controlled production of ZnO nanoparticles from zinc glycerolate in a sol-gel silica matrix

The controlled production of ZnO nanoparticles within an amorphous silica matrix is achieved using a new methodology consisting of four stages. First, precursor zinc glycerolate nanoparticles are produced within reversed micelles of glycerol in heptane stabilized by the surfactant Aerosol-OT (bis-ethylhexyl sodium sulfosuccinate, AOT). The surface of these nanoparticles is then modified by exchanging AOT with bis-trimethoxysilyl-ethane (BTME). The surface-modified nanoparticles are copolymerized with tetramethoxysilane (TMOS) to provide a composite silica material, in which the nanoparticles are apparently dissolved, producing a uniform distribution of zinc in the silica matrix. Finally, the conversion of zinc to ZnO is achieved by heating the material at 700 degrees C, leading to a uniform dispersion of very small (<10 nm) ZnO particles within the amorphous matrix. The fluorescence spectrum of the ZnO particles within the matrix is blue-shifted, as expected from the strong quantum confinement achieved. The properties of the system at all stages in this synthetic process are monitored using TEM, XRD, fluorescence and FT-IR spectroscopy. Glycerol forms complexes with many metal ions, so the present procedure may be generalized to provide uniform distributions of metal ions and subsequently metal oxide nanoparticles in amorphous silica.     

SiO2/ZnO复合纳米粒子的制备及表征

采用双注控制沉积法(Controlled Double-Jet Precipitation,CDJP)将反应物添加到含有SiO₂的溶液中,通过直接的表面反应来制备单分散的SiO₂/ZnO复合纳米粒子,并对其进行了表征。透射电镜(TEM)观察表明,SiO₂表面有一层ZnO纳米颗粒或薄层。对复合纳米粒子SiO₂/ZnO进行X射线衍射(XRD)分析,复合颗粒的衍射峰与单独的氧化锌的衍射峰完全一致。能量弥散X射线法(EDX)分析表明,复合颗粒中含有Zn、Si、O元素。荧光光谱表明有ZnO的吸收峰。     

Preparation and characterization of porous TiO_2/ZnO composite nanofibers via electrospinning

<正>Porous TiO_2/ZnO composite nanofibers have been successfully prepared by electrospinning technique for the first time.It was generated by calcining TiO_2/ZnCl_2/PVP[PVP:polyvinyl pyrrolidone)]nanofibers,which were electrospun from a mixture solution of TiO_2,ZnCl_2 and PVP.Transmission electron microscopy(TEM) and X-ray diffraction(XRD) analyses were used to identify the morphology of the TiO_2/ZnO nanofibers and a formation of inorganic TiO_2/ZnO fibers.The porous structure of the TiO_2/ZnO fibers was characterized by N_2 adsoption/desorption isotherm.Surface photovoltage spectroscopy(SPS) and photocatalytic activity measurements revealed advance properties of the porous TiO_2/ZnO composite nanofibers and the results were compared with pure TiO_2 nanofibers,pure ZnO nanofibers and TiO_2/ZnO nanoparticles.     

Biofunctional magnetic nanoparticles as a general agent to immobilize proteins contained in traditional Chinese medicines

Maghemite nanoparticles were synthesized by the coprecipitation method. Silica was coated to the maghemite nanoparticles and amino silane was modified to the surface of the silica magnetic nanoparticles. We use the biofunctional magnetic nanoparticles as a general agent to immobilize and separate the proteins in a broad range from different traditional Chinese medicines. The transmission electron microscopy results showed that the average diameter of the well-dispersed silica-coated nanoparticles was about 60 nm. The Fourier transform infrared spectrum indicated that the amino group had been successfully coupled to the surface of the maghemite particles. And the protein immobilization effect was characterized by the microplate reader. The characterization results proved that the synthesized functional magnetic nanoparticles could effectively immobilize and separate the proteins from traditional Chinese medicines.     

室温下纳米氧化锌新相的合成及表征

常温常压下,用高分子聚乙烯吡咯烷酮(PVP)作为表面修饰剂,成功地合成了粒度分布窄、平均粒度为4.0nm的氧化锌纳米微粒,其晶体结构与文献报道在高温高压(450℃,6×10⁸Pa)下合成的体相ZnO具有相同结构.EXAFS实验结果表明,纳米Zn-O的键长比体相发生收缩,Zn原子周围的氧配位数减少.     

Silane-based poly(ethylene glycol) as a primer for surface modification of nonhydrolytically synthesized nanoparticles using the Stöber method

This paper describes the use of methoxy-poly(ethylene glycol) silane (MPEG-sil) as a linker molecule for the synthesis of silica-coated nanoparticles by the St?ber method. While short alkane chain-based siloxanes including (acryloxypropyl)trimethoxysilane and 3-methacryloxypropyl-trimethoxysilane are popular molecules used in surface modification, they are not efficient for the silica coating of nanoparticles synthesized from organic solvents containing long carbon chain carboxylic acids or amines as capping agents. Here, we report the utilization of MPEG-sil to bridge this gap. Our approach is based on a two-phase system, in which ligand exchange takes place in a hydrophobic environment and the surface modification with silica is conducted in an ethanol-water mixture. Our results show that this two-phased approach was effective to coat monodisperse Fe2O3 nanoparticles capped with oleic acid and Ag nanoparticles capped with oleylamine with uniform SiO2 shells. The process was also demonstrated for double-shell nanostructures to produce SiO2-coated Pt@Fe2O3 core-shell nanoparticles. The results described in this work represent a new approach for the surface modification with silica coating of monodisperse nanoparticles synthesized from nonhydrolytic solutions and can potentially have a broad ramification in the development of water-dispersible nanoparticles for biological applications.     

有机修饰氧化硅对抗紫外纳米ZnO的原位表面修饰

以正硅酸乙酯和二甲基二乙氧基硅烷作为共前驱体,通过溶胶-凝胶反应得到有机修饰氧化硅;用有机修饰氧化硅对碱式碳酸锌进行原位表面改性,通过对表面改性碱式碳酸锌进行热处理得到表面改性纳米ZnO;分析了表面改性纳米ZnO的结构和性能.结果表明,经有机修饰氧化硅改性处理的纳米ZnO具有强憎水性,与有机相的相容性较强,光催化活性得...     

Design of super-tough and antibacterial PPR/nano-ZnO composites based on the excellent dispersion of ZnO particles

Herein, polyvinyl pyrrolidone (PVP) dispersants are used to disperse and isolate zinc oxide (ZnO) particles. A high-pressure spray device is used to dry the dispersed nano-fillers quickly to achieve the structure of PVP chains wrapping and isolating ZnO particles. Scanning electron microscopy shows that most of the size of the agglomerated ZnO nanoparticles in polypropylene random (PPR, obtained by random copolymerization of propylene and ethylene) is maintained below 100 nm, and only a small amount of large agglomerates with a particle size less than 400 nm. An excellent dispersion of nano-ZnO fillers prepared by this method can greatly improve the toughness of PPR and endow it with good antibacterial properties. When the content of the ZnO nanoparticles is 3 wt%, the notched impact strength of PVZ3 increases to 48.85 kJ m⁻² (unbroken), which is 3.6 times than that of pure PPR. In addition, 3 phr ZnO nanoparticles give PPR excellent antibacterial properties, with an antibacterial rate of 99.9% (Escherichia coli and Staphylococcus aureus). The value of antibacterial activity (E. coli) of PVZ3 reached more than 6.0, which is nearly three times that of PZ.