Multimode laser emission from dye-doped hollow polymer optical fibre

Well-resolved multimode laser emission was observed for the first time from a freestanding microring cavity based on Rhodamine B dye-doped hollow polymer optical fibre by transverse pumping. Fibres with different diameters such as 180, 460, 640 and 800 μm were fabricated from a dye-doped hollow polymer preform. A blueshift in the mode structure was observed with decrease in fibre diameter leading to wide range tunability of the laser emission.     

10-W cladding-pumped fiber laser with single transverse mode output

A Yb-doped double-clad fiber laser is demonstrated with a measured power output of 10.6 W and a fundamental spatial mode. The optical-to-optical conversion efficiency is 44% and the slope efficiency is 86% closed to quantum efficiency of optical conversion. In our laser system, a D-shape (340 μm/400 μm) inner cladding Yb-doped fiber is used as the gain material within the Fabry-Perot cavity. Multimode diode pump radiation is injected into the cladding through an end facet of the composite fiber.     

A single-longitudinal-mode continuous-wave Ho~(3+):YVO_4 laser at 2.05 μm pumped by a Tm-fibre laser

We present a single-longitudinal-mode continuous-wave Ho~(3+):YVO_4 laser at 2.05 μm pumped by a Tm-doped fibre laser. Use of a cavity etalon enables spectral selectivity for single-mode operation. The highest power achieved in the single longitudinal mode at 2052.5 nm is 282 mW at a slope efficiency of 6.9%, corresponding to an optical conversion efficiency of 3.0%. These features demonstrate that this single-longitudinal-mode Ho:YVO_4 laser is suitable for use as a seed laser in some Lidar systems(e.g., coherent Lidar or differential absorption Lidar). To the best of our knowledge, this is the first report on such a single-longitudinal-mode Ho:YVO_4 laser at 2.05 μm.     

Spectrum control and shaping of optical pulses in optical fibre interferometers

This paper discusses the use of single-mode fibre ring interferometers for injection laser line narrowing and for enhancement of optical emission power. The efficient launching into fibre ring interferometers of multi-frequency external cavity injection laser emission, in both the c.w. and mode-locking regime, has been achieved. Matching the optical lengths of the external cavity and fibre interferometer allowed the measurement of mode width of such a laser. A method is proposed for shaping optical pulses in fibre ring interferometers from constant intensity frequency modulated emission. The mode-locking regime of all-fibre external cavity injection lasers has been achieved.     

Random lasing in dye-doped polymer dispersed liquid crystal film

A dye-doped polymer-dispersed liquid crystal film was designed and fabricated,and random lasing action was studied.A mixture of laser dye,nematic liquid crystal,chiral dopant,and PVA was used to prepare the dye-doped polymer-dispersed liquid crystal film by means of microcapsules.Scanning electron microscopy analysis showed that most liquid crystal droplets in the polymer matrix ranged from 30 μm to 40 μm,the size of the liquid crystal droplets was small.Under frequency doubled 532 nm Nd:YAG laser-pumped optical excitation,a plurality of discrete and sharp random laser radiation peaks could be measured in the range of 575–590 nm.The line-width of the lasing peak was 0.2 nm and the threshold of the random lasing was 9 m J.Under heating,the emission peaks of random lasing disappeared.By detecting the emission light spot energy distribution,the mechanism of radiation was found to be random lasing.The random lasing radiation mechanism was then analyzed and discussed.Experimental results indicated that the size of the liquid crystal droplets is the decisive factor that influences the lasing mechanism.The surface anchor role can be ignored when the size of the liquid crystal droplets in the polymer matrix is small,which is beneficial to form multiple scattering.The transmission path of photons is similar to that in a ring cavity,providing feedback to obtain random lasing output.     

单模光纤相位光栅外腔主动锁模半导体激光器

报道用单模光纤光折变相位光栅作外腔的主动锁模半导体产激光器，产生１．５３μｍ，１．０６５ＧＨｚ，１５ｐｓ的近变换限超短光脉冲。     

染料掺杂液晶填充毛细管的激光发射特性研究

本文提出利用染料掺杂液晶填充PI光控取向膜毛细管获得可调谐激光.采用532 nm YAG倍频脉冲激光器抽运,实验及理论研究了有聚酰亚胺(PI)取向膜和无PI取向膜毛细管的激光发射特性,对比分析了两种情形的激光产生阈值以及随温度变化的特性.结果表明:经PI光控取向处理的染料掺杂胆甾相液晶毛细管的激光发射模式具有分布反馈模式和回音壁模式,同时,激光产生阈值为4.5 m J·mm~(-2);发现当温度升高时,发射光谱发生"蓝移",中心波长调谐范围为5.9 nm,温度升高到43℃时,形成质量非常好的回音壁模式,其自由光谱范围为1.05 nm.经PI光控取向处理的染料掺杂向列相液晶激光发射模式为随机激光,并且较无PI取向时激光发射峰减少.     

环形腔2.05μm单谐振KTP晶体光参量振荡器研究

针对大气CO_2浓度探测差分吸收激光雷达的应用需求,采用稳定环形腔和模式匹配设计,搭建了一套单纵模1 064nm激光泵浦的单谐振KTP晶体光参量振荡器,获得高斜率转换效率、基横模的2.05μm波长纳秒激光脉冲输出.在8字形环形行波稳定腔中,将2块II类相位匹配KTP晶体以走离补偿方式放置,在20Hz重复频率下,当泵浦单脉冲能量达到11mJ时,获得了单脉冲能量为2.4mJ的2.05μm信号光输出,脉宽约24ns,斜率效率达到53%.2.05μm信号光光束质量因子在x、y方向分别为1.3和1.2.     

Compact passively q-switched Nd:YAG laser for 2D micromachining

We present a compact passively q-switched diode end pumped Nd:YAG laser at 1064 nm for 2D micromachining. It consists of a 5.5 cm long plano-concave end pumped resonator carrying a Cr:YAG passive q-switch inside the cavity. With an optical conversion efficiency of 46 and 33% the laser emits 1.4 W in CW and 986 mW in q-switched mode at a current of 2.5 A. After using a 2 mm circular aperture the output is seen in TEM₀₀ mode with a single pulse energy of 5 mJ. The laser produced circular holes of diameter 75 μm in 25 μm thick Tantalum foils. Actual results of 1D and 2D machining are shown along with the diffraction patters of the samples.     

外腔锁模多量子阱二极管激光器

报道一种用作光通讯光源的外腔锁模多量子阱结构半导体激光器，其脉冲宽度２～５ｐｓ，波长调谐范围为１．５２～１．５７μｍ，锁模频率０．５～１．０ＧＨｚ平均输出光功率为１ｍＷ。     

硅衬底上锗硅合金光波导的研制

报道锗硅合金在λ＝１．３μｍ的脊形单模光波导的设计，工艺及测量结果。这种光波导的传播损耗已达０．７ｄＢ／ｃｍ。脊形的高４－８μｍ，宽８－１２μｍ，均和单模光纤芯径相当，此外，其数值孔径在光波导的输入，输出端均能和单模光纤匹配，它已满足硅光集成对光波导的要求。文中最后报道了用这种锗硅合金光波导试制Ｙ分支器，并观察到二支分路输出的单模光斑。     

介质/金属结构太赫兹空芯光纤的传输特性

理论分析了金属、介质/金属结构空芯光纤在THz波段的模式结构和传输特性.金属空芯光纤支持TE11模式,介质/金属空芯光纤的介质膜厚在取最优值时支持HE11模式.对于波长为200μm的太赫兹波,内径为1 mm的两种空芯光纤,TE11和HE11模式的损耗分别为8.4 dB/m和2 dB/m.为优化介质/金属结构宅芯光纤的传输性能,分析了金属和介质材料的光学常数对衰减系数的影响.基于几种已发表的金属在太赫兹波段的光学常数,计算结果表明铝是最好的选择;初步测量结果显示,在各种树脂材料中聚乙烯在THz波段吸收较小,并且其折射率接近介质膜的最优值1.41,为太赫兹波空芯光纤中介质膜材料的理想选择.     

1.06 μm泵浦PPLT高重复频率人眼安全激光器

 利用1.06 μm光泵浦周期极化钽酸锂（PPLT）晶体获得1.54 μm激光。采用内腔式光参量振荡结构,利用V型腔优化谐振腔参数,分析了OPO晶体内光斑大小随激光工作物质热焦距的变化以及V型腔夹角对光束质量的影响。当泵浦电功率约为100 W时,获得高重复频率10 kHz、脉冲宽度125 ns、平均功率1.9 W的1.54 μm激光,电光转换效率约为1.9%。     

A Continuously Tunable Erbium-Doped Fibre Laser Using Tunable Fibre Bragg Gratings and Optical Circulator

A continuously tunable erbium-doped fibre laser （TEDFL） based on tunable fibre Bragger grating （TFBG） and a three-port optical circulator （OC） is proposed and demonstrated. The OC acts as a 100%-reflective mirror. A strain-induced uniform fibre Bragger grating （FBG） which functions as a partial-reflecting mirror is implemented in the linear cavity. By applying axial strain onto the TFBG, a continuously tunable lazing output can be realized. The wavelength tuning range covers approximately 7.00nm in C band （from 1543.6161 to 1550.3307nm）. The side mode suppression ratio （SMSR） is better than 50 dB, and the 3 dB bandwidth of the laser is less than 0.01 nm. Moreover, an array waveguide grating （AWG） is inserted into the cavity for wavelength preselecting, and a 50 km transmission experiment was performed using our TEDFL at a 10 Gb/s modulation rate.     

Holey optical fibres: Fundamental properties and device applications

The presence of wavelength-scale holes in the transverse profile of a holey fibre can lead to novel optical properties that cannot be achieved in more conventional forms of optical fibre. Examples of such properties include broadband single-mode guidance, the extremes of fibre nonlinearity, from fibres providing tight mode confinement to those offering large mode areas, and a range of remarkable dispersive properties, including broadband flattened dispersion, anomalous dispersion below 1.3 μm, and large normal dispersion values at 1.55 μm. Fundamentals and recent progress are reviewed, ranging from design and fabrication through to applications and devices based on this emerging fibre type. To cite this article: T.M. Monro, D.J. Richardson, C. R. Physique 4 (2003).     

高效率内腔式2 μm简并光学参量振荡器

报道了一种高效率的2 μm光学参量振荡器. 利用1.064 μm声光调Q Nd:YVO₄激光器抽运基于氧化镁掺杂周期性极化铌酸锂的内腔式光学参量振荡器, 在简并状态实现了稳定高效的2 μm激光输出. 当808 nm激光二极管抽运功率为20 W, Q开关工作频率为15 kHz时, 产生了平均功率为3.5 W、脉冲宽度为1.4 ns的2 μm激光, 光-光转换效率为17.5%, 斜效率为25%. 据我们所知, 该转换效率在2 μm波段内腔式光学参量振荡器中是最高的.     

Cavity waveguide-output laser

We propose for the first time a laser configuration which couples the cavity standing wave field directly with an optical fibre or optical fibre taper using its polished face as an output coupling mirror. A method for direct, active and paraxial launching of laser emission into an optical fibre, adaptable for various laser active media, has been achieved on this basis. Some of the important parameters of this laser are expressed in analytical form. Experimental verification of the proposed idea has been conducted on the basis of a dye laser. Excellent intensity distribution has been obtained beyond the optical fibre output. Launching efficiency exceeding 80% has been predicted and measured experimentally.     

Continuous-wave, single-frequency intracavity singly resonant optical parametric oscillator at 1.5-μm wavelength

We present a 1.5μm continuous-wave （CW） single-frequency intracavity singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO is placed inside the ring cavity of a single-frequency 1.06μm Nd：YVO4 laser pumped by a laser diode. The device delivers a maximum single-frequency output power of 310 mW at a resonant signal wavelength of 1.57 μm. The signal wave could be tuned from 1.57 to 1.59 μm by temperature tuning of PPLN crystal over the range of 130 - 170℃.     

Change in optical path length of saturable absorbing dye-doped polymer films under laser irradiation

The cause of the change in the optical path lengthΔ(nd) of the saturable absorbing dye-doped polymer films under laser irradiation is investigated using polyvinyl alcohol and gelatin films doped with erythrosin B. The temperature rise of the dye-doped films, the changes in optical path length, film thickness, the refractive index and the optical density of the dye-doped films are measured under laser irradiation. The thermal expansion due to the temperature rise of the dye-doped films caused by the irradiation has greater effect on theΔ(nd) than the fading of dye molecules due to the irradiation of laser beams.     

轴向隐失波激励的回音壁模式光纤激光器

采用轴向隐失波激励增益的方式,使激光增益区域局限在光纤回音壁模式的模场区域内,显著地降低了回音壁模式光纤激光辐射的抽运阈值,由此形成一种低阈值的回音壁模式光纤激光器.在微焦耳量级的低抽运能量条件下,用回音壁模式光纤激光器研究了激光染料的浓度效应.实验结果表明,随着激光染料浓度的增加,回音壁模式激光辐射的波长向长波方向移动,激光波长范围变宽.用回音壁模式染料激光的四能级模型得到激光上能级和所有能级上的分子数比值γ(λ)曲线后,很好地解释了实验结果.低抽运阈值的回音壁模式光纤激光器,为研究液体激光现象提供了极为便利的手段.