4-氨基-4'-氰基联苯的合成

氨基氰基联苯;4-氨基-4'-氰基联苯的合成     

4-乙酰氨基-4’-甲基丙烯酰氨基-二苯基甲烷的合成及其聚合

N-芳基丙烯酰胺是-类功能性单体,它能与丙烯酸酯类单体进行自由基共聚合。本文以4,4'-二氨基二苯基甲烷为起始原料,合成了新的带有较长侧基的甲基丙烯酰胺类单体,即4-乙酰氨基-4'-甲基丙烯酰氨基-二苯基甲烷(AMDPM)。它能进行自由基聚合或与丙烯酸甲酯(MA)共聚合。     

4β-氨基-4脱氧鬼臼毒素和4β-氨基-4脱氧-4'-去甲基鬼臼毒素的两种新合成方法

我们在研究抗肿瘤活性物质的基础上[1～ 5 ],注意到鬼臼类化合物具有抗癌活性 ,但其毒副作用较大 ,我们对其结构进行了改造 ,以研制活性更高而毒性更小的新的衍生物 .从以前有关鬼臼毒素及其类似物的构效关系研究中已得出以下几个方面的结构要求是保持其抗癌活性必须具备的条件 :(ａ)在4’ 位有一个酚羟基 ;(ｂ)Ｃ 4取代基位是 β构型 ;(ｃ)具有反式内酯环[6 ].研究表明 ,4 β 酰胺基的鬼臼衍生物具有较强的抗癌活性[7].而 4 β 氨基 4脱氧鬼臼毒素和 4 β 氨基 4脱氧 4’去甲基鬼臼毒素是合成此类衍生物的最重要中间体 .合成这两个化合物的…     

3-氨基-4-氨基肟基呋咱的合成及其晶体结构

以丙二腈为原料,用一锅法合成了呋咱类含能化合物3-氨基-4-氨基肟基呋咱(AAOF),收率72.4%。用1H NMR,13C NMR,IR,MS,元素分析和四圆单晶X-射线衍射仪对其分子和晶体结构进行了表征。结果表明:AAOF晶体属单斜晶系,空间群P21/c。主要晶体结构参数为:a=0.7651(3)nm,b=1.1702(3)nm,c=1.9216(10)nm,β=96.47(4)°,V=1.7095(12)nm3,Z=12,Dc=1.668 g.cm-3,F(000)=888。AAOF分子共面性较好,晶体中存在分子内和分子间氢键。     

4-氨基-1-丁醇的合成研究

使用四丁基溴化铵为相转移催化剂,以4-氯-1-丁醇作为起始原料,与邻苯二甲酰亚胺钾盐反应制备N-(4-羟基丁基)邻苯二甲酰亚胺(中间产物),中间产物在氢氧化钠的作用下水解得到4-氨基-1-丁醇。通过高分辨质谱、核磁共振谱等对中间产物和产品进行了测定和结构表征。考察了反应溶剂、4-氯-1-丁醇与邻苯二甲酰亚胺钾盐摩尔比、反应温度、反应时间、四丁基溴化铵与邻苯二甲酰亚胺钾盐摩尔比对中间产物收率的影响,优化反应条件之后4-氨基-1-丁醇最佳的总收率为77. 2%。此工艺路线具有合成方法简便、反应条件温和、产品收率高等优点,可以进行工业放大。     

4-氨基吡啶合成方法改进

4-氨基吡啶合成方法改进;甲酰胺基吡啶;降解;水解     

4-(4-氨基苯基)-3-吗啉酮的合成

以乙醇胺为起始原料,通过环合、Goldberg藕联、还原,三步反应合成利伐沙班关键中间体4-(4-氨基苯基)-3-吗啉酮;该方法反应条件温和、生产成本低、绿色环保,具有良好的工业化前景。     

用二氧化硫脲合成4-甲基-4′-氨基二苯醚的研究

4甲基4′氨基二苯醚是合成农药、染(颜)料、医药的重要中间体.传统的制备方法是由4 甲基4′硝基化合物(简称硝基物)在盐酸存在下用二氯化锡还原得到[1] ,该方法工艺成熟、产品质量好,但产率低,污染严重.陈其亮等报道了由硝基物催化加氢的方法[2],但存在设备投资大,操作繁锁等缺点.二氧化硫脲(Thiourea dioxide ,简称TD)是一种非常优良的还原剂,已广泛应用于有机合成的许多方面[3,4],但应用于标题化合物的制备未见报道,本文对此进行了研究,收到较好效果.合成路线如下:     

2,6-二溴-4-氨基吡啶的合成

从时间分辨荧光免疫分析双功能螯合剂合成需要出发,设计了2,6-二溴-4-氨基吡啶的合成路线.以2,6-二溴吡啶为起始原料,经过氧化、硝化和还原三步合成了该化合物,通过红外光谱、元素分析和熔点测定对其进行了表征.证明了该结构和合成方法的可靠性,并分别探讨了各步产物合成反应条件的影响,具有一定的参考价值.     

3-氨基-4-腈基吡唑的合成

经两步反应全盛了3－氨基－4－腈基吡唑；丙二腈与原甲酸三乙酯反应得到乙氧亚甲基丙二腈；其产物再与水合肼反应得到3－氨基－4－腈基吡唑，总收率为68．3％。     

Synthesis and Characterization of a Novel Poly(aryl ether) Containing 4-Chloro-2,5-diphenyloxazole

4-Chloro-2,5-bis(4-fluorophenyl)oxazole monomer has successfully been synthesized using cyclization reaction of 4-fluorobenzoyl cyanide with 4-fluorobenzaldehyde. This monomer was converted to poly(aryl ether)s by nucleophilic substitution of the fluorine atoms on the benzene rings of oxazole monomer with bisphenol A. The influence of the reaction time on the molecular weight had been investigated. The polymers were identified by FT-IR,¹H-NMR and TGA. The products exhibited weight-average molar masses up to 2.81 x 10⁴g mol⁻¹ in GPC. These poly(aryl ether)s showed very high thermal stability up to 363 °C for 5 % weight loss in TGA under N₂.     

Conductivity and band gap of oligo-2-[(4-fluorophenyl) imino methylene] phenol and some of its oligomer-metal complexes

Schiff base oligomer of 2-[(4-fluorophenyl) imino methylene] phenol (FPIMP) was synthesized via oxidative polycondensation reaction in an alkaline medium. Oligomer-metal complex compounds were synthesized from the reactions of oligo-2-[(4-fluorophenyl) imino methylene] phenol (OFPIMP) with Co⁺², Ni⁺² and Cu⁺² ions. The synthesis was achieved by oxidative coupling based on air oxygen as an oxidant. While synthesized Schiff base oligomer was soluble in most common organic solvents, its metal complexes were only soluble in dimethylsulfoxide. Electrochemical HOMO and LUMO band gap (E_g) of monomer, oligomer and its metal complexes were calculated from oxidation and reduction onset values. According to cyclic voltammetry (CV) and UV-vis measurements, electrochemical energy gaps and optical band gap (E_g) values of monomer and oligomer were found to be 3.26 and 3.10; 3.15 and 2.96 eV, respectively. Conductivity measurements of doped and undoped Schiff base oligomer and its metal complexes were carried out by electrometer at a room temperature and atmospheric pressure and were calculated from four-point probe technique. When iodine was used as doping agent, conductivity of this oligomer and its metal complexes were observed to be increased.     

Proton conductivity survey of the acid doped copolymers based on 4‐vinylbenzylboronic acid and 4(5)‐vinylimidazole

In this work, poly(4‐vinylbenzylboronic acid‐co‐4(5)‐vinylimidazole) (poly(4‐VBBA‐co‐4‐Vim)) copolymers were synthesized by free‐radical copolymerization of the monomers 4‐VBBA and 4‐Vim at various monomer feed ratios. The copolymers were characterized by ¹H MAS NMR and ¹¹B MQ‐MAS NMR methods and the copolymer composition was determined via elemental analysis. The membrane properties of these copolymers were investigated after doping with phosphoric acid at several stoichiometric ratios. The proton exchange reaction between acid and heterocycle is confirmed by FTIR. Thermal properties of the samples were investigated via thermogravimetric analysis (TGA) and Differential scanning calorimetry (DSC). The morphology of the copolymers was characterized by x‐ray diffraction, XRD. The temperature dependence of proton conductivities of the samples was investigated by means of impedance spectroscopy. Proton conductivity of the copolymers increased with the doping ratio and reached to 0.0027 S/cm for poly(4‐VBBA‐co‐4‐Vim)/2H₃PO₄ in the anhydrous state. The boron coordination in the copolymer was determined by ¹¹B MQ‐MAS experiment and the coexistence of three and four coordinated boron sites was observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1267–1274, 2009     

SYTHESIS AND ANIONIC POLYMERIZATION OF 2-METHYL-2-METHOXYCARBONYL-5-METHYLENE-1, 3-DIOXOLAN-4-ONE

A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ~(13)CNMR, INEPT(Intensive Nuclei Enhanced by Polarization Transfer) technique, IR and elementalanalysis. Anionic polymerization of the monomer was carried out in anhydrous THF at -70℃,and 9-fluorenyllithium was used as initiator. The polymer structure was determined by IR, NMRand elemental analysis. Molecular weight of the polymer was estimated by viscosity measurementin DMSO at 30℃.     

Tapered copolymers of styrene and 4-vinylbenzocyclobutene via carbanionic polymerization for crosslinkable polymer films

Well-defined polystyrene homopolymers with surface-adhesive triethoxysilyl end group were synthesized via living carbanionic polymerization, epoxide end-functionalization and subsequent hydrosilylation with triethoxysilane. Grafting-to performance of polymers with various molecular weight (M_n = 3000–14,000 g mol⁻¹) to a silicon surface was examined in dependence of reaction time, polymer concentration, solvent and number of alkoxysilyl end groups. Crosslinkable polymers for surface modification were synthesized by statistical carbanionic copolymerization of 4-vinylbenzocyclobutene (4-VBCB) and styrene, followed by epoxide end-functionalization and triethoxysilane modification (M_n = 4000–14,000 g mol⁻¹). The copolymers were characterized by ¹H-NMR, THF-SEC, and matrix-assisted laser desorption and ionization time-of-flight mass spectrometry. In situ ¹H-NMR kinetic studies in cyclohexane-d₁₂ provided information regarding the monomer gradient in the polymer chains, with styrene being the more reactive monomer (r_s = 2.75, r_4-VBCB = 0.23). Thin polymer films on silicon wafers were prepared by grafting-to surface modification under conditions derived for the polystyrene homopolymer. The traceless, thermally induced crosslinking reaction of the benzocyclobutene units was studied by DSC in bulk as well as in 3–6 nm thick polymer films. Crosslinked films were analyzed by atomic force microscopy, ellipsometry, and nanoindentation, showing smooth polymer films with an increased modulus. © 2019 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 181–192     

Second-order nonlinear optical hyperbranched polymers via facile ring-opening addition reaction of azetidine-2,4-dione

A new hyperbranched polymeric structure was chosen as a nonlinear optical material. First, a difunctional chromophore, 4-(4′-nitrophenyl-diazenyl) phenyl-1,3-diamine (NDPD) was synthesized, which was then reacted with 4-isocyanato-4′(3,3-dimethyl-2,4-dioxo-azetidino)diphenylmethane (MIA) to form NDPDMIA (A₂ type monomer). The azetidin-2,4-dione functional groups exhibit selective reactivity, which can react only with primary amines under mild conditions. The hyperbranched polymers were synthesized via ring-opening addition reaction between azetidine-2,4-dione (A₂ type monomer) and primary amine (B₃ type monomer). This synthetic scheme comes with easy purification, high yield and rapid synthesis. Chemical structures of the hyperbranched polymers were characterized by FT-IR, ¹H NMR, and elemental analysis. The inherent viscosity of hyperbranched polymers in DMSO ranged from 0.15 to 0.22 dLg⁻¹. All of the obtained polymers were soluble in DMF, DMAc, and DMSO. Using in situ contact poling, r₃₃ coefficients of 6-16 pm/V and their temporal stability at 60 °C were obtained. Optical loss measurement was also achieved by a prism coupling setup.     

Photoinduced polymerization and oligomerization of 4-vinylbenzophenone

The photopolymerizations of 4-vinylbenzophenone (VBP) in various solvents were investigated to make clear the photoininiation characteristics. It was found that direct photoirradiation produces polymers, oligomers (trimers), and dimers. The dimers were identified as trans- and cis-1,2-bis(4-benzoylphenyl)cyclobutanes. The fraction of trans-form in the cyclobutane dimers produced was about 80%, and was little affected by the reaction conditions. The quantum yields ([VBP] = 0.1M in benzene) was estimated to be 3 × 10^?2 for the dimerization and 2 × 10^?4 for the initiation of polymerization. The photoreactions via π,π^* triplet state of the monomer was suggested from the results.     

Preparation and structural characterization of poly(4-vinylphenylacetate-co-maleic anhydride)

Poly(4-vinylphenylacetate-co-maleic anhydride) was synthesized by free-radical initiation to yield a 1:1 copolymer over a 0.2-0.8 mole fraction range of monomer feed in maleic anhydride. Evidence of 1:1 charge transfer complex between 4-vinylphenylacetate and maleic anhydride was obtained in the UV region at 355 nm. The ¹³C NMR chemical shifts and ¹H NMR integration data indicate that poly(4-vinylphenylacetate-co-maleic anhydride) has an alternating and stereoregular structure. The molecular weight of poly(4-vinylphenylacetate-co-maleic anhydride) was controlled by using specific solvents and initiator concentrations.     

Synthesis of a novel bridged nucleoside bearing a fused-azetidine ring, 3′-amino-3′,4′-BNA monomer

A novel bridged nucleic acid monomer, 3′-amino-3′-deoxy-5-methyl-3′-N,4′-C-methyleneuridine, was successfully synthesized via a useful and convenient azetidine ring formation under Staudinger's conditions. A ¹H NMR experiment and a PM3 calculation revealed that the sugar moiety of the novel bridged nucleic acid monomer, 3′-amino-3′,4′-BNA, was restricted to S-type conformation.