CuSO_4/TiO_2催化剂在氨选择性催化还原氮氧化物反应中的性能(英文)

氮氧化物(NO_x)是主要的大气污染物之一.氨气选择性催化还原法(NH_3-SCR)是目前去除固定源排放的氮氧化物的最有效方法,被广泛用于燃煤或者生物质的火电厂中.催化剂是NH_3-SCR法的核心,其中V_2O_5-WO_3/TiO_2催化剂是主要的商业SCR催化剂;但是V_2O_5有毒,对环境的影响很大;另外,该催化剂具有较高的SO_2氧化性能.因而研究者一直在探索新型的SCR催化剂.SO_2是燃煤电厂烟气中的典型气体之一,所以抗硫性能是催化剂的一个重要指标.在SCR反应条件下,SO_2和O_2容易与氧化物催化剂发生反应生成稳定性较高的硫酸盐,覆盖在催化剂表面从而引起催化剂失活.但已有研究发现,硫化会提高K中毒后的V_2O_5-WO_3/TiO_2催化剂的活性.并且,短时间的硫化可以明显提高CuO/Al_2O_3的NH_3-SCR活性.硫酸盐催化剂或许具有较低毒性和较高抗硫性能,应该是一种有前景的SCR催化剂.本文以商业纳米TiO_2为载体,采用湿式浸渍法制备了一系列的CuSO_4/TiO_2催化剂.在自制的活性评价装置上测试了样品的NH_3-SCR活性并且在340℃下连续24 h测试了SO_2、水蒸气及两者共同作用对催化剂活性的影响.使用N_2等温吸附-脱附、X射线衍射(XRD)、X射线光电子能谱(XPS)、H_2程序升温还原(H2-TPR)和NH_3程序升温脱附(NH_3-TPD)对催化剂进行了表征.另外,采用原位红外漫反射光谱研究了CuSO_4/TiO_2催化剂上的NH_3-SCR反应过程.N_2等温吸附-脱附结果表明,负载的CuSO_4没有明显改变载体的孔结构.而XRD结果仅显示锐钛矿TiO_2的衍射峰,说明CuSO_4在载体上有较好的分散度或者CuSO_4的含量低于检测限.XPS结果显示,催化剂中的铜主要以Cu~(2+)形式存在,硫主要以SO_4~(2-)形式存在,而氧主要以晶格氧和吸附氧两种形式存在,并且CuSO_4的存在会增加催化剂中吸附氧的含量.H_2-TPR结果表明,随着CuSO_4含量的增加,催化剂的氧化还原能力逐渐增强.NH_3-TPD结果表明,催化剂表面的酸性位数目随着样品中CuSO_4含量的增加而增加.纯TiO_2的NH_3-SCR活性很差,当温度从300℃增加到450℃时,最高NO_x转化率仅为32.7%.但当CuSO_4负载到TiO_2上以后,催化剂活性明显提高.在反应温度高于340℃时,CuSO_4/TiO_2催化剂的NO_x转化率在94%以上,与商业V_2O_5-WO_3/TiO_2催化剂相当,并且其N_2O生成量低于商业催化剂.不过,当温度低于340℃时,CuSO_4/TiO_2催化剂的NO_x转化率明显低于商业催化剂,说明CuSO_4/TiO_2催化剂的活性仍有待改善.连续24 h测试了SO_2、水蒸汽及两者的共同作用对CuSO_4/TiO_2催化剂活性的影响.结果显示,单独的水蒸气会导致活性轻微下降,但SO_2以及两者共同存在时对催化剂的活性基本没有影响.CuSO_4/TiO_2催化剂的NH_3吸附红外光谱表明,催化剂上存在Lewis和Bronsted两种酸性位,但Bronsted酸性位上的NH_4~+稳定性较差,280℃时即基本消失.在高温时,NH_3主要吸附在Lewis酸性位上且CuSO_4/TiO_2催化剂对NO_x的吸附能力较差,红外光谱未检测到NO_x的吸附峰.380℃下,当NO和O_2通入预吸附NH_3的催化剂样品时,属于Lewis酸性位上NH_3的红外峰明显下降,说明Lewis酸性位上吸附的NH_3参与了反应.CuSO_4/TiO_2显示出高的抗硫抗水性能和比较好的NH_3-SCR活性,应该是一种有应用前景的SCR催化剂.CuSO_4可以增加催化剂的酸性位数目和吸附氧量.根据原位红外漫反射结果,CuSO_4/TiO_2上的SCR反应遵循Eley-Rideal机理.气相的NO与吸附在Lewis酸性位上的NH_3反应生成N_2和H_2O或许是主要的反应途径,并且吸附氧可能会促进这个过程.     

功能离子液体[NH2p-bim]BF4吸收CO2的密度泛函研究

用密度泛函理论对功能化离子液体[NH2p-bim]BF4吸收CO2的作用机制进行了理论研究。在RB3LYP/6-311 G**的计算水平对离子液体[NH2p-bim]BF4的结构以及CO2与该离子液体反应可能生成的产物进行了全优化,获得了优化结构的振动频率和热力学数据。计算结果表明,离子液体[NH2p-bim]BF4吸收CO2主要是通过离子液体的阳离子[NH2p-bim] 自偶解离的[NHp-bim]与CO2分子结合生成[O2C-NHp-bim],其结合能为238-260 kJ/mol。     

Adsorption of NH3 onto activated carbon prepared from palm shells impregnated with H2SO4

Adsorption of ammonia (NH3) onto activated carbons prepared from palm shells impregnated with sulfuric acid (H2SO4) was investigated. The effects of activation temperature and acid concentration on pore surface area development were studied. The relatively large micropore surface areas of the palm-shell activated carbons prepared by H2SO4 activation suggest their potential applications in gas adsorption. Adsorption experiments at a fixed temperature showed that the amounts of NH3 adsorbed onto the chemically activated carbons, unlike those prepared by CO2 thermal activation, were not solely dependent on the specific pore surface areas of the adsorbents. Further adsorption tests for a wide range of temperatures suggested combined physisorption and chemisorption of NH3. Desorption tests at the same temperature as adsorption and at an elevated temperature were carried out to confirm the occurrence of chemisorption due to the interaction between NH3 and some oxygen functional groups via hydrogen bonding. The surface functional groups on the adsorbent surface were detected by Fourier transform infrared spectroscopy. The amounts of NH3 adsorbed by chemisorption were correlated with the contents of elemental oxygen present in the adsorbents. Mechanisms for chemical activation and adsorption processes are proposed based on the observed phenomena.     

NH4VO3在NH4H2PO4-H2O和(NH4)3PO4-H2O体系中的溶解度

采用等温溶解法测定了偏钒酸铵(NH₄VO₃)在NH₄H₂PO₄-H₂O和(NH₄)₃PO₄-H₂O体系中T = 298.15-328.15 K时的溶解度以及溶液的密度和pH值。结果表明, NH₄VO₃的溶解度随着(NH₄)₃PO₄或NH₄H₂PO₄溶液浓度的增大,先降低后升高,这是由于同离子效应、化学反应平衡及离子活度的共同作用。比较T = 298.15K时, NH₄VO₃分别在NH₄H₂PO₄-H₂O、(NH₄)₂HPO₄-H₂O和(NH₄)₃PO₄-H₂O体系中溶解度,发现在相同的磷酸盐浓度下, NH₄VO₃的溶解度在NH₄H₂PO₄-H₂O体系中最大,在(NH₄)₃PO₄-H₂O体系中居中,在(NH₄)₂HPO₄-H₂O体系中最小。进一步地,在T = 298.15 K和磷酸盐浓度C = 0.5 mol·kg^-1时,结合pH值和反应溶度积常数K_SP等计算三个体系中的平均离子活度系数(γ_±),发现γ_±值在(NH₄)₂HPO₄-H₂O体系中最大,在(NH₄)₃PO₄-H₂O体系中居中,在NH₄H₂PO₄-H₂O体系中最小,与溶解度规律一致。     

First characterization of the ammine-ammonium complex [(NH4(NH3)4)2(mu-NH3)2]2+ in the crystal structure of [NH4(NH3)4][B(C6H5)4].NH3 and the [NH4(NH3)4]+ complex in [NH4(NH3)4][Ca(NH3)7]As3S6.2NH3 and [NH4(NH3)4][Ba(NH3)8]As3S6.NH3

The compound [NH4(NH3)4][B(C6H5)4].NH3 (1) was prepared by the reaction of NaB(C(6)H(5))(4) with a proton-charged ion-exchange resin in liquid ammonia. [NH(4)(NH(3))(4)][Ca(NH(3))(7)]As(3)S(6).2NH(3) (2) and [NH4(NH3)4][Ba(NH3)8]As3S6.NH3 (3) were synthesized by reduction of As(4)S(4) with Ca and Ba in liquid ammonia. All ammoniates were characterized by low-temperature single-crystal X-ray structure analysis. They were found to contain the ammine-ammonium complex with the maximal possible number of coordinating ammonia molecules, the [NH4(NH3)4]+ ion. 1 contains a special dimer, the [(NH4(NH3)4)2(mu-NH3)2]2+ ion, which is formed by two[NH4(NH3)4]+ ions linked by two ammonia molecules. The H(3)N-H...N hydrogen bonds in all three compounds range from 1.82 to 2.20 A (DHA = Donor-H...Acceptor angles: 156-178 degrees). In 2 and 3, additional H(2)N-H...S bonds to the thioanions are observed, ranging between 2.49 and 3.00 A (DHA angles: 120-175 degrees). Two parallel phenyl rings of the [B(C(6)H(5))(4)](-) anion in 1 form a pi...pi hydrogen bond (C...C distance, 3.38 A; DHA angles, 82 degrees), leading to a dimeric [B(C6H5)4]2(2-) ion.     

(NH4)2SiF6 evaporation in the presence of SiO2

The kinetics and mechanism of the solid-phase reaction between (NH₄)₂SiF₆ and silica at molar ratios of (0.5–5): 1 were studied. SiO₂ is bound with (NH₄)₂SiF₆ to form volatile NH₄SiOF₃, which abruptly enhances the ammonium hexafluorosilicate evaporation. The activation energy and rate constants of evaporation were calculated for an (NH₄)₂SiF₆ + SiO₂ (2: 1) mixture in the range 220–300°C. The reaction with crystalline SiO₂ has a higher yield than with an amorphous “white soot.” The role of the SiO₂ surface in the formation of the volatile products is discussed. The phase and chemical composition of the sublimates was studied.     

钾对CuSO4/TiO2脱硝催化剂的失活效应(英文)

为了减少碳排放,在世界各地兴建了越来越多的生物质电厂。钾元素是生物质电厂烟气中的一种典型元素并且可以引起脱硝催化剂的失活。具有优异抗SO₂性能的CuSO₄/TiO₂催化剂被认为是一种有前景的非钒基脱硝催化剂。但是,钾对CuSO₄/TiO₂催化剂的影响仍不清楚。本文研究了钾对CuSO₄/TiO₂催化剂的影响并且与商业V₂O₅-WO₃/TiO₂ (VWTi)催化剂作了比较,采用多种表征方法对催化剂样品进行了表征。钾可以引起CuSO₄/TiO₂和VWTi催化剂的失活,但是CuSO₄/TiO₂催化剂对钾的抵抗能力明显高于商业VWTi催化剂。钾会与CuSO₄/TiO₂催化剂中的CuSO₄发生反应生成CuO和...     

Die IR-Spektren von NH4UO2AsO4·3H2O und NH4UO2PO4·3H2O

The infrared spectra of the title compounds, as well as that of the structurally related mineral meta-autunite, [Ca(UO₂)₂(PO₄)₂·n H₂O], are reported and discussed using the available crystallographic data. The results can be considered as representative for the full group of the so-called torbernite-minerals.     

Structure of Pd/SiO2 sol-gel and impregnated catalysts

Palladium catalysts were prepared by sol-gel and impregnation techniques both in acid and basic media. The sol-gel catalysts resulted in larger PdO crystallites than the impregnated catalysts. In both preparation methods, an acid medium promoted the formation of small metal crystallites which provided catalytic activity. A stronger metal-support interaction was found in sol-gel catalysts synthesized from a square planar palladium complex. Deactivation results in phenylacetylene hydrogenation have been attributed to palladium hydrate formation or to deposition of carbonaceous compounds. The preparation mode determined the contribution of each deactivating reaction.     

Magnetic Fe3O4/SiO2/NH2 As the Recyclable Heterogeneous Nanocatalyst on Bisphenol-A Recovery from Polycarbonate Wastes

Polycarbonate (PC) wastes received from optical (CDs) and digital optical discs (DVDs) were chemical recycled by using diethylene glycol (DEG) and water as an alternative green solvents and magnetite nanomaterials coated with amine modified silica nanoshell (Fe₃O₄/SiO₂/NH₂) as the recyclable heterogeneous catalyst to recover bisphenol-A (BPA) as a valuable material in 100% yield and without using harmful reagent and environmental problems. The nano-magnetic heterogeneous catalyst can be recycled for four cycles and used next reaction. The recovered BPA and nanomaterials were examined with transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), and spectroscopic methods (¹H NMR, ¹³C NMR, FTIR).

     

Dynamic disorder in ammonium oxofluorotungstates (NH4)2WO2F4 and (NH4)3WO3F3

Ammonium oxofluorotungstates, (NH₄)₂WO₂F₄ and (NH₄)₃WO₃F₃, are characterized by vibration spectroscopy and quantum chemistry methods with the use of NMR ¹⁹F and ¹H data. It is shown in the approximation of the density-functional theory that in isolated octahedrons [WO₂F₄]^2? and [WO₃F₃]^3? the mutual arrangement of oxygen atoms in cis-position corresponds to the energy minimum. The presence of intraspheric disorder in [WO₃F₃]^3? (unlike [WO₂F₄]^2?) explains the complex character of vibrational spectra of this anion and eliminates existent in the literature differences in their interpretation (between C _2v and C _3v structure variants). Models of intraspheric dynamics of [WO₃F₃]^3? are discussed.     

Metallampullen als Mini‐Autoklaven: Synthese und Kristallstrukturen der Ammoniakate [Al(NH3)4Cl2][Al(NH3)2Cl4] und (NH4)2[Al(NH3)4Cl2][Al(NH3)2Cl4]Cl2

Metal Ampoules as Mini‐Autoclaves: Syntheses and Crystal Structures of [Al(NH₃)₄Cl₂][Al(NH₃)₂Cl₄] and (NH₄)₂[Al(NH₃)₄Cl₂][Al(NH₃)₂Cl₄]Cl₂ The salts [Al(NH₃)₄Cl₂]⁺[Al(NH₃)₂Cl₄]^–≡AlCl₃ · 3 NH₃ ( 1 ) and (NH₄⁺)²[Al(NH₃)₄Cl₂]⁺[Al(NH₃)₂Cl₄]^–(Cl^–)₂≡ AlCl₃ · 3 NH₃ · (NH₄)Cl ( 2 ) have been obtained as single crystals during the reactions of aluminum and aluminum trichloride, respectively, with ammonium chloride in sealed Monel metal containers. The crystal structure of 1 was determined again [triclinic, P‐1; a = 574.16(10); b = 655.67(12); c = 954.80(16) pm; α = 86.41(2); β = 87.16(2); γ = 84.89(2)°], that of 2 for the first time [monoclinic, I2/m; a = 657.74(12); b = 1103.01(14); c = 1358.1(3) pm; β = 103.24(2)°].     

Synthesis and characterization of three novel cation-containing (NH4+/C3H7NH3+/NH3+C2H4NH3+) aluminum diphosphonates

Three new aluminum diphosphonates (C(3)H(7)NH(3))[AlF[(HO)O(2)PC(2)H(4)PO(3)]] (1) (orthorhombic, Pnma, a = 8.2048(1) A, b = 6.90056(6) A, c = 19.6598(4) A, Z = 4), (H(3)NC(2)H(4)NH(3))[Al(OH)(O(3)PC(2)H(4)PO(3))] (2) (monoclinic, P2(1)/n, a = 11.142(3) A, b = 7.008(2) A, c = 12.903(5) A, beta = 96.24(7) degrees, Z = 4), and (NH(4))(2)[AlF(O(3)PCH(2)PO(3))] (3) (orthorhombic, Cmcm, a = 16.592(2) A, b = 7.5106(9) A, c = 7.0021(9) A, Z = 4) have been synthesized by solvothermal methods in the presence of linear organic ammonium cations (for 1 and 2) and ammonium cations (for 3) and their structures determined using powder, microcrystal, and single-crystal X-ray diffraction data, respectively. All three materials contain a similar one-dimensional chain motif which is related to that found in the mineral Tancoite. This chain motif consists of corner-sharing octahedra (AlO(4)F(2) for 1 and 3 and AlO(6) for 2) linked together through the bridging CPO(3) tetrahedra of the diphosphonate groups. These chains are unusual in that each diphosphonate moiety acts as a bisbidentate ligand that is coordinated to the same two metal centers through both of the O(3)PC- groups of the diphosphonate ligand. The arrangement of the Tancoite-like chains and charge compensation cations in the structures of compounds 1-3 is seen to be dependent upon the nature of the diphosphonic acid and organoammonium/ammonium cations. Careful selection of these two components may provide a method to design future materials in this system.     

Theoretical investigation on the reaction of HS+ with CH3NH2

The singlet and triplet potential energy surfaces for the reaction of HS⁺ with the simplest primary amine, CH₃NH₂, were determined at the CCSD(T)/6-311+G(d,p) level using the B3LYP/6-311G(d,p) and QCISD/6-311G(d,p) geometries. All possible reaction channels were explored. The results show that three paths on the singlet potential energy surface and one path on the triplet potential energy surface are competitive. These four feasible paths provide products which are presented in the paper and they are consistent with previous experimental results. On the other hand, the stationary points involved in the most favourable path all lie below those of the reactant and thus the title reaction is expected to be rapid, which is also consistent with the experiment.     

Chemoselective Solvent-free Deoximation by (NH4)2Cr2O7 in the Presence of ZrCl4 on Wet SiO2

Russian Journal of Organic Chemistry -     

Synthesis of a layered zinc phosphate, [NH3(CH2)2NH2(CH2)3NH3][Zn2(PO4)(HPO4)2].H2O,and its transformation to a extra-large pore three-dimensional zinc phosphate, [NH3(CH2)2NH2(CH2)3NH3][Zn3(PO4)(HPO4)3

An unusual two-dimensional zinc phosphate with pendant phosphate groups, projecting into the inter-lamellar space between the layers, has been synthesized and is shown to transform into a three-dimensional structure with 16-membered bifurcated channels, giving evidence for the building up process in the formation of open-framework structures.     

Extraction of diclofenac by SiO2‐NH2@Fe3O4 and its determination: Central composite design

In this work, magnetic nanoparticles (Fe₃O₄) were prepared by simple co‐precipitation method in aqueous medium and then subsequently modified with tetraethyl orthosilicate and 3‐aminopropyl triethylenesilane. The properties of the particles were characterized by FTIR spectroscopy X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy. The SiO₂‐NH₂@Fe₃O₄ particles were successfully applied to simultaneously enrich and separate diclofenac from water, urine, and plasma samples. The method, which takes the advantages of both nanoparticle adsorption and magnetic phase separation from the sample solution, could avoid some of the time‐consuming experimental procedures related to the traditional solid phase extraction. The main parameters affecting extraction and desorption efficiency such as pH, amount of SiO₂‐NH₂@Fe₃O₄, volume of desorption solvent, and extraction time were screened. The significant variables were optimized by using central composite design. At optimum conditions values of variables set as pH = 4, 10 mg SiO₂‐NH₂@Fe₃O₄, 0.5 mL methanol, and 15 min extraction time and then the extracted diclofenac were injected to HPLC for analysis. The linear response (r² > 0.9992) was obtained in the range of 0.004–15 µg/mL with detection limit 0.0012 µg/mL and extraction recovery was in the range of 92–96% with RSD < 5% (n = 6).