The first synthesis of dihydro-3H-pyrido[2,3-b][1,4]diazepinols and a new alternative approach for diazepinone analogues

The first synthesis of a series of 2-aryl(heteroaryl)-4-trifluoromethyl-4,5-dihydro-3H-pyrido[2,3-b][1,4]diazepin-4-ols, where aryl = C₆H₅, 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-CH₃C₆H₄, 4-OCH₃C₆H₄, 4,4′-biphenyl, 1-naphthyl and heteroaryl = 2-thienyl, 2-furyl obtained from the direct cyclocondensation reaction of 4-methoxy-1,1,1-trifluoroalk-3-en-2-ones with 2,3-diaminopyridine in 54-71% yield, is reported. Another alternative and efficient route for the synthesis of a series of 2-aryl(heteroaryl)-3H-pyrido[2,3-b][1,4]diazepin-4(5H)-ones from the reaction 4-methoxy-1,1,1-trichloroalk-3-en-2-ones with 2,3-diaminopyridine, in 54-70% yield, is also reported.     

A rapid, one-pot, four-component route to 2H-indazolo[2,1-b]phthalazine-triones

A new, efficient, and environmentally benign protocol for the one-pot, four-component synthesis of 2,2-dimethyl-13-phenyl-2,3-dihydro-1H-indazolo[2,1-b]phthalazine-1,6,11(13H)-trione by condensation of phthalic anhydride, hydrazinium hydroxide, aromatic aldehydes, and dimedone catalyzed by Ce(SO₄)₂·4H₂O as an ecofriendly catalyst with high catalytic activity and reusability at 125 °C under solvent-free conditions is reported. The reaction proceeds to completion within 5-10 min in 71-95% yield. To the best of our knowledge, this new procedure provides the first example of an efficient synthetic method for 2H-indazolo[2,1-b]phthalazine-1,6,11(13H)-trione via a four-component reaction.     

A one-pot three-component reaction in aqueous micellar medium: an easy route to chromeno[2,3-b]quinolinedione

An efficient and green synthesis of hitherto unreported 5-aryl-3,3-dimethyl-2,3-dihydro-5aH-chromeno[2,3-b]quinoline-1,11(4H,5H)dione has been accomplished by a three-component reaction involving chromone-3-carbaldehyde, an aromatic amine, and 5,5-dimethyl-1,3-cyclohexanedione (dimedone) in 1.8 M aqueous TBAB solution. It is noteworthy that the TBAB/H₂O system can be recovered and reused for seven cycles directly.     

Environment-friendly organic synthesis using bismuth compounds. Bismuth triflate catalyzed synthesis of substituted 3,4-dihydro-2H-1-benzopyrans

A highly catalytic method for the synthesis of dihydrobenzopyrans from salicylaldehydes has been developed. An extension of this method to the synthesis of a pyrano[2,3,b]benzopyran has also been achieved. Bi(OTf)₃·xH₂O (1 < x < 4) (0.1 mol%) smoothly catalyzes the condensation of substituted salicylaldehydes with 2,2-dimethoxypropane to give the corresponding substituted 3,4-dihydro-2H-1-benzopyrans as a mixture of diastereomers (9:1) in moderate yields. The relative configuration of the methoxy groups in the two diastereomers was established by NOE experiments. The advantages of this method include the use of an easy to handle, inexpensive and relatively non-toxic catalyst.     

Site-selective Suzuki-Miyaura reactions of 2,3-dibromo-1H-inden-1-one

The first transition metal-catalyzed cross-coupling reactions of 2,3-dibromo-1H-inden-1-one are reported. The Suzuki-Miyaura reaction of 2,3-dibromo-1H-inden-1-one with 2 equiv of arylboronic acid gave 2,3-diaryl-1H-inden-1-ones. The reaction with 1 equiv of arylboronic acid gave 2-bromo-3-aryl-1H-inden-1-ones with very good site-selectivity. The one-pot reaction of 2,3-dibromo-1H-inden-1-one with two different arylboronic acids afforded 2,3-diaryl-1H-inden-1-ones containing two different terminal aryl groups.     

A one-pot synthetic approach to the functionalized isomeric ellipticine derivatives through an imino Diels-Alder reaction

An efficient, three component, one-pot synthesis of new isomeric ellipticine derivatives prepared through an imino Diels-Alder reaction of 3-aminocarbazoles and substituted benzaldehydes with electron-rich alkenes such as 3,4-dihydro-2H-pyran, 2,3- dihydrofuran and ethyl vinyl ether catalyzed by InCl₃ (10 mol %) in ionic liquid is reported. In the case of substituted benzaldehydes, reductive amination is observed.     

Phosphomolybdic acid-catalyzed efficient one-pot three-component aza-Diels-Alder reactions under solvent-free conditions: a facile synthesis of trans-fused pyrano- and furanotetrahydroquinolines

trans-Fused pyrano- and furanotetrahydroquinoline derivatives have been synthesized via a one-pot three-component aza-Diels-Alder reaction of aryl imines formed in situ from aromatic amines and arylaldehydes with cyclic enol ethers,such as 3,4-dihydro-2H-pyran and 2,3-dihydrofuran,in the presence of 1 mol % of phosphomolybdic acid under solvent-free conditions at room temperature in good to excellent yields.     

Structural elucidation of the β-turn inducing (S)-[3-amino-4-oxo-2,3-dihydro-5H-benzo[b][1,4]thiazepin-5-yl] acetic acid (DBT) motif

X-ray diffraction analysis of Boc-DBT-NH₂ (DBT = (S-[amino]-5-carbethoxymethyl-2,3-dihydro-1,5-benzothiazepine-4(5H)-one) showed that this constrained dipeptide mimetic adopts a type II′ β-turn in the solid state. IR and NMR studies indicated that the folded conformation is retained in solution.     

Facile ring-closure cyclization of arenes by nucleophilic C-alkylation reaction in ionic liquid

A novel synthetic method using an ionic liquid (IL) for a six-membered ring-closure cyclization is described. The ring-closure cyclization by nucleophilic C-alkylation was achieved with various halo- and alkanesulfonyloxyalkyl aromatic compounds in high yields with minimal byproducts using ILs as the reaction media in the absence of any catalyst. For example, the cyclization of 2-(3-methanesulfonyloxy-propoxy)naphthalene (1a) to 2,3-dihydro-1H-naphtho[2,1-b]pyran (2) in IL [bmim][PF₆] proceeded selectively at 150 °C for 24 h in 85% yield.     

DAST promotes the synthesis of new 5-(trifluoromethyl)-3-(1,1-difluoroethan-2-yl)-1H-pyrazoles

This study describes, firstly, the synthesis of a new precursor, 4,6,6-trimethoxy-1,1,1-trifluorohex-3-en-2-one (1), from the trifluoroacetylation reaction of 1,1,3,3-tetramethoxybutane, in 65% yields. Afterwards, the reaction of 1 with two hydrazines (NH₂NHR, where R = 2-furanoyl, C₆F₅) led to a new series of 4,5-dihydro-1H-pyrazoles, containing an acetal-protected aldehyde function as substituent, in 90-97% yields. In a subsequent step, the dehydration reactions of these 4,5-dihydro-1H-pyrazoles gave the respective aromatic 1H-pyrazoles. Finally, we report the results of the deprotection reactions of the acetals to obtain the respective aldehyde function, as well as, the subsequent fluorination reaction using DAST, leading to new difluorinated derivatives in 55-60% yields.     

Substituent effects in the ring-chain tautomerism of 1,3-diaryl-2,3-dihydro-1H-naphth[1,2-e][1,3]oxazines

Condensation of Betti base analogue amino naphthols with substituted benzaldehydes led to 1,3-diaryl-2,3-dihydro-1H-naphth[1,2-e][1,3]oxazines (3-9) which proved to be three-component (r¹-o-r²) tautomeric mixtures in CDCl₃ at 300 K. The electronic effects of the 3-aryl groups on the ratios of the ring-chain tautomeric forms at equilibrium could be described by the equation log K_X=ρσ⁺+log K_X=H. The value of the intercept was found to be strongly influenced by the steric arrangement of the 1,3-diaryl substituents.     

Unexpected course of rearrangement of substituted S-(1(3H)-isobenzofuranone-3-yl)isothiuronium bromides

Three series of S-(1(3H)-isobenzofuranone-3-yl)isothiuronium bromides differing in substitution at the isothiuronium moiety (none, one or two methyl groups) and at the benzene ring were prepared and characterized. These salts were then treated with various bases (acetate, triethylamine, Na₂CO₃) to give either 1-hydroxy-3-oxo-1,3-dihydro-2H-isoindol-2-carbothioamides or the product of S to N isobenzofuranone-3-yl migration, i.e., 1,3-dimethyl-1-(3-oxo-1,3-dihydro-2-benzofuran-1-yl)thioureas. If ammonia was used in reaction with N,N′-dimethyl isothiuronium salts then 3-hydroxy-2,3-dihydro-1H-isoindol-1-ones were formed together with 1,3-dimethyl-1-(3-oxo-1,3-dihydro-2-benzofuran-1-yl)thioureas in parallel reaction with the yields increasing with ammonia concentration. The formation of isoindolones takes place in two steps with an aldehyde intermediate, which can be trapped with N,N-dimethylhydrazine.     

Unprecedented InCl3-catalyzed formation of cis-fused perhydrofuro[2,3-b]oxepines

2-Methylindole and its N-substituted derivatives react smoothly with 2,3-dihydrofuran (DHF) in the presence of a catalytic amount of InCl₃ under mild conditions to afford the corresponding 2-methyl-3-perhydrofuro[2,3-b]oxepin-4-yl-1H-indole derivatives in fairly good yields with high diastereoselectivity, while 3,4-dihydro-2H-pyran (DHP) affords exclusively 5,5-di(1H-3-indolyl)-1-pentanol derivatives in high yields under similar reaction conditions.     

A novel and easy two-step,microwave-assisted method for the synthesis of halophenyl pyrrolo[2,3-b]quinoxalines via their pyrrolo precursors. Evaluation of their bioactivity

A novel, two-step, facile route for the synthesis of pyrrolo[2,3-b]quinoxalines via 2,3-dioxopyrroles, enhanced by microwave irradiation, is presented. The newly synthesized 2,3-dioxo-5-halophenyl pyrrolo precursors 4a–c as well as the non-aromatized ethyl 2-(4-halophenyl)-1-methyl-2,4-dihydro-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 6a–c and the aromatized ethyl 2-(4-halophenyl)-1-methyl-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 7a–c were evaluated for their antioxidant, cytostatic, and antiviral properties. Most of them proved to be potent hydroxyl radical scavengers and inhibited in vitro lipid peroxidation. The compounds showed moderate antiproliferative activity, while 6a inhibited vaccinia virus at an EC₅₀ value of 2 μM, and 4c and 6c inhibited Sindbis virus at EC₅₀ values of 4 μM.     

Gallium(III) triflate-catalyzed one-pot selective synthesis of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones

A series of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones have been synthesized in good to excellent yields and high selectivity by one-pot reaction using isatoic anhydride, ammonium acetate (or amines), and aldehydes in ethanol or in DMSO under mild conditions, respectively. The reaction was efficiently promoted by 1 mol % Ga(OTf)₃ and the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.     

Development and validation of a nonaqueous capillary electrophoretic method for the enantiomeric purity determination of a synthetic intermediate of new 3,4-dihydro-2,2-dimethyl-2H-1-benzopyrans using a single-isomer anionic cyclodextrin derivative and an ionic liquid

The enantiomeric purity determination of a synthetic intermediate of new 3,4-dihydro-2,2-dimethyl-2H-1-benzopyrans, i.e. 4-amino-2,2-dimethyl-6-ethoxycarbonylamino-3,4-dihydro-2H-1-benzopyran, was successfully carried out using an anionic cyclodextrin (CD) derivative combined with a chiral ionic liquid (IL). In order to obtain high resolution and efficiency values, the addition of a chiral IL, i.e. ethylcholine bis(trifluoromethylsulfonyl)imide (EtChol NTf₂), to the background electrolyte containing heptakis(2,3-di-O-methyl-6-O-sulfo)-β-CD (HDMS-β-CD) was found to be essential. A simultaneous increase in separation selectivity and enantioresolution seems to indicate a synergistic effect of HDMS-β-CD and EtChol NTf₂. The best enantioseparation of the key intermediate was achieved using a methanolic solution of 0.75 M formic acid, 10 mM ammonium formate, 1.5 mM HDMS-β-CD and 5 mM EtChol NTf₂. Levamisole was selected as internal standard. The optimized conditions allowed the determination of 0.1% of each enantiomer in the presence of its stereoisomer using the method of standard additions. The NACE method was then fully validated with respect to selectivity, response function, trueness, precision, accuracy, linearity and limits of detection and quantification.     

Substituent effect on the stereoselectivity of acylation of racemic heterocyclic amines with N-phthaloyl-3-aryl-(S)-alanyl chlorides

The acylative kinetic resolution of racemic 2-methyl-1,2,3,4-tetrahydroquinoline and 2,3-dihydro-3-methyl-4H-1,4-benzoxazine using acyl chlorides of N-phthaloyl-(S)-phenylalanine, N-phthaloyl-3-(4-nitrophenyl)-(S)-alanine and N-phthaloyl-O-methyl-(S)-tyrosine as chiral resolving agents has been carried out. It is shown that the effectiveness of an acylative kinetic resolution depends on the electronic effects of substituents in the phenyl fragment of the acylating agent and increases as the electron-donating properties of the para-substituent (OMe > H > NO₂) in phenyl fragment of N-phthaloyl-3-aryl-(S)-alanyl chlorides increase; conducting the process at a reduced temperature also contributes to an enhancement of the kinetic resolution.     

Copper-catalyzed one-pot synthesis of 2-thioxo-2,3-dihydroquinazolin-4(1H)-ones from ortho-bromobenzamides and isothiocyanates

Copper-catalyzed tandem reaction of ortho-bromobenzamides and isothiocyanates is described, which provides an efficient and practical route for the synthesis of 2-thioxo-2,3-dihydroquinazolin-4(1H)-ones. The optimal condition involved the following parameters: CuI as precatalyst, Cs₂CO₃ as base, N,N′-dimethylethane-1,2-diamine as ligand, and toluene as solvent, with reaction temperature at 120 °C.     

Syntheses and catalytic activities of Group 4 metal complexes derived from C(cage)-appended cyclohexyloxocarborane trianion

The reaction of Li[closo-1-Me-1,2-C₂B₁₀H₁₀] with cyclohexene oxide produced closo-1-Me-2-(2′-hydroxycyclohexyl)-1,2-C₂B₁₀H₁₀ (1) in 86% yield. Decapitation of (1) with potassium hydroxide in refluxing ethanol gave the corresponding cage-opened potassium salt of the carborane anion, [nido-1-Me-2-(2′-hydroxycyclohexyl)-1,2-C₂B₉H₁₀]⁻ (2) in 82% yield. Deprotonation of (2) with two equivalents of n-butyllithium in THF at −78 °C, followed by its further reaction with anhydrous MCl₄ · 2THF (M = Ti, Zr) produced the corresponding d⁰-half-sandwich metallacarboranes, closo-1-M(Cl)-2-Me-3-(2′-σ-O-cyclohexyl)-η⁵-2,3-C₂B₉H₉ (3 M = Zr; 4 M = Ti), in 59% and 51% yields, respectively. Reaction of Li[closo-1,2-C₂B₁₀H₁₁] with Merrifield’s peptide resin (1%) in refluxing THF gave the ortho-carborane-functionalized polymer (5) in 88% yield. The corresponding closo-1-polystyryl-2-(2′-hydroxycyclohexyl)-1,2-C₂B₁₀H₁₀ (6) was produced in 94% yield by refluxing a mixture of the lithium salt of (5) and cyclohexene oxide in THF for 2 days. Compound (6) was decapitated, deprotonated and then reacted with ZrCl₄ · 2THF to produce a polymer-supported d⁰-half-sandwich metallacarborane closo-1-Zr(Cl)-2-polystyryl-3-(2′-σ-O-cyclohexyl)-η⁵-2,3-C₂B₉H₉ (7) in 41% yield. Compounds (3) and (7), in the presence of MMAO-7 (13% ISOPAR-E), were found to catalyze the polymerization of ethylene and vinyl chloride in toluene to give high molecular weight PE (9.4 × 10³ (M_w/M_n = 1.8)) and PVC (2.1 × 10³ (M_w/M_n = 1.6)), respectively.     

Uranyl(VI) complexes of [O,N,O,N′]-type diaminobis(phenolate) ligands: Syntheses,structures and extraction studies

The syntheses and crystal structures of four new uranyl complexes with [O,N,O,N′]-type ligands are described. The reaction between uranyl nitrate hexahydrate and the phenolic ligand [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L1 in a 1:2 molar ratio (M to L), yields a uranyl complex with the formula [UO₂(HL1)(NO₃)] · CH₃CN (1). In the presence of a base (triethylamine, one mole per ligand mole) with the same molar ratio, the uranyl complex [UO₂(HL1)₂] (2) is formed. The reaction between uranyl nitrate hexahydrate and the ligand [(N,N-bis(2-hydroxy-3,5-di-t-butylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L2, yields a uranyl complex with the formula [UO₂(HL2)(NO₃)] · 2CH₃CN (3) and the ligand [N-(2-pyridylmethyl)-N,N-bis(2-hydroxy-3,5-dimethylbenzyl)amine], H₂L3, in the presence of a base yields a uranyl complex with the formula [UO₂(HL3)₂] · 2CH₃CN (4). The molecular structures of 1–4 were verified by X-ray crystallography. The complexes 1–4 are zwitter ions with a neutral net charge. Compounds 1 and 3 are rare neutral mononuclear [UO₂(HLn)(NO₃)] complexes with the nitrate bonded in η²-fashion to the uranyl ion. Furthermore, the ability of the ligands H₂L1–H₂L4 to extract the uranyl ion from water to dichloromethane, and the selectivity of extraction with ligands H₂L1, H₃L5 (N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-3-amino-1-propanol), H₂L6 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-1-aminobutane · HCl) and H₃L7 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-6-amino-1-hexanol · HCl) under varied chemical conditions were studied. As a result, the most efficient and selective ligand for uranyl ion extraction proved to be H₃L7 · HCl.