分散聚合法制备非离子型聚丙烯酰胺“水包水”乳液

利用丙烯酰胺在硫酸铵水溶液分散介质中的分散聚合制备了聚丙烯酰胺水溶性聚合物分散体;研究了硫酸铵浓度、聚甲基丙烯酰氧乙基三甲基氯化铵(PDMC)的相对分子质量及甲酸钠用量对聚丙烯酰胺水分散体系分散稳定性的影响.结果表明,获得稳定聚丙烯酰胺分散体系的最佳合成条件为:不加甲酸钠、PDMC的相对分子质量为8.02×105、硫酸铵的质量分数为20.9%.在最佳条件下得到的聚丙烯酰胺聚合物的相对分子质量为1.12×106.     

硫酸铵水溶液中分散聚合法制备两性共聚物P(AM-co-AA-co-DAC-co-DMC)

利用分散聚合技术,在硫酸铵水溶液中以丙烯酰胺(AM)、丙烯酸(AA)、丙烯酰氧乙基三甲基氯化铵(DAC)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体,合成了两性共聚物P(AM-co-AA-co-DAC-co-DMC).用FTIR,13C-NMR,TEM等方法表征了聚合物的结构和组成.考察了不同分散稳定剂、正负离子单体配比和pH对分散聚合的影响,并对P(AM-co-AA-co-DAC-co-DMC)水基分散聚合条件及稳定性进行了一些探讨.实验表明,在硫酸铵水溶液中制得较稳定的P(AM-co-AA-co-DAC-co-DMC)分散体系,应选用非离子型或阳离子型的分散稳定剂,如聚乙烯吡咯烷酮(PVP)、聚甲基丙烯酰氧乙基三甲基氯化铵(PDMC)、聚丙烯酰氧乙基三甲基氯化铵(PDAC),而其pH应在2到4之间.当选用占总质量1.5%的聚乙烯吡咯烷酮(PVP)为分散稳定剂,引发温度为40℃,正负离子单体物质的量比值大于1,pH=3时,可以制得总离子度超过25%的纳米级两性聚合物.     

聚合物多元醇分散体的流变特性

聚合物多元醇分散体(以下简称分散体)是接枝聚醚多元醇、聚醚多元醇和乙烯基单体聚合物的混合物,直接用于制备高回弹、高负载和阻燃的软质和半软质聚氨酯泡沫体,是新一代聚醚多元醇产品[1].分散体用于聚氨酯工业中各种产品的生产,除要求有良好的稳定性外,其最为重要的指标是粘度应小于3000mPa·s和乙烯基单体聚合物的含量(固含量)应大于40%.但分散体的粘度,随固含量的增加呈指数性增加[2].近年来,已有既具高固含量和良好稳定性,又有较低粘度的分散体的研究报道[3].本文在不同的反应条件下,合成了分散体,测定了其流变特性和体系中微粒的大小…     

聚苯乙烯单分散微球粒径可控性探讨

在系统研究分散聚合反应中的原料组成(分散稳定剂、单体、引发剂)和反应条件(反应介质极性、反应体系温度、搅拌速度)对所制备的聚合物微球的粒径大小及粒径分布和聚合反应速率影响的基础上,根据各因素的影响效应,优化设计分散聚合的反应条件,成功地制备出1μm~10μm粒径范围内不同粒径级别的微米级单分散聚合物微球,实现了不同粒径大小及粒径分布的微米级单分散聚合物微球制备的控制设计。     

分散聚合法制备单分散聚苯乙烯微球

以苯乙烯为单体,偶氮二异丁腈为引发剂,聚乙烯吡咯烷酮为分散稳定剂,在乙醇/水的极性反应体系中,使用分散聚合法制备了聚苯乙烯(PS)微球。研究了制备工艺对微球分子量等远程结构参数的影响。研究结果表明:在适合微球形成的单体用量、引发剂和分散稳定剂的浓度、反应温度、时间和乙醇/水的比例等参数下,克服了以往存在的粒径不均匀、分子量较低、微球表面圆整光洁度较低和产率偏低等主要问题,制备了粒径在1.5~3μm之间、粒径分布1.05~1.08、分子量80×104左右、最高得率达97%、球体表面光洁、球形对称均匀且相互不粘连的单分散PS微球。     

季铵盐型阳离子聚合物的合成及其在超细颜料中的应用

采用自由基溶液聚合,制备了甲基丙烯酰氧乙基三甲基氯化铵-苯乙烯-甲基丙烯酸甲酯三元共聚物,并用此阳离子聚合物作为分散剂制备超细有机颜料分散体系。用FT-IR和13C-NMR分析、表征了共聚物的结构,用GPC研究了聚合物的分子量及分子量分布,用滴定法测定了聚合物中阳离子单体含量。结果表明:聚合物的结构及用量对颜料分散体系的影响较大,当聚合物中阳离子单体含量为59.5%-69.7%,mAIBN/mM=0.010-0.012时,颜料的粒径最小且体系的稳定性最好,阳离子聚合物质量分数大于0.004时,分散体系的分散性能较好。     

交联聚氨酯水分散体的合成

将硅氧烷封端的含亲水基团的线性聚氨酯预聚体分散于水中 ,获得稳定的聚氨酯分散体 .由于硅氧基团水解、缩合 ,在分散体粒子内产生扩链交联反应 ,生成了交联水基聚氨酯分散体 .透射电子显微镜研究表明分散体粒径小、分布宽 .扫描电子显微镜研究了成膜结构及成膜性能与粒径的关系 .溶胀实验计算获得的两交联点之间的平均分子量与理论平均分子量相符 .研究还发现此分散体膜在干燥过程中可进一步交联 .膜的水溶胀及机械性能表明 ,此分散体具有极大的工业应用价值 .     

分散聚合法制备PVP微球的研究

以N-乙烯基吡咯烷酮(NVP)为初始单体,乙酸乙酯为分散介质,采用分散聚合法制备了分散性能良好、粒径为3～4μm的聚乙烯基吡咯烷酮(PVP)微球.考察了单体、分散剂及引发剂浓度对PVP微球的粒径、单体转化率及分子量的影响,并对PVP的结构和性能进行研究.结果表明,单体浓度增加,PVP微球粒径和分子量增大,单体转化率升高;分散剂浓度增加,PVP微球粒径变小,分子量增大,单体转化率升高;引发剂浓度增加,PVP微球粒径变大,分子量减小,单体转化率升高.与溶液聚合法相比,分散聚合法制备的PVP分子量较小且具有一定的结晶性.     

阿维菌素纳米水分散体的制备、表征及稳定性

利用阿维菌素具有2个活性羟基的特性,设计合成了一种具有阿维菌素结构单元的阴离子型聚氨酯分散剂,采用核磁共振和红外光谱表征了其结构.利用分散剂与阿维菌素结构的相似性,将溶有阿维菌素的分散剂溶液加入水中,制备了阿维菌素的纳米水分散体.研究分散剂中羧基含量及其分子量对分散体粒径的影响,结果表明,随着羧基含量的增加,分散体粒径逐渐降低,适当控制分子量有助于改善分散剂的分散能力.透射电镜显示分散粒子具有近似球形的形貌,粒径在20~40 nm之间.纳米分散体具有较高的离心稳定性和稀释稳定性.     

分散聚合法制备单分散交联聚苯乙烯微球

以苯乙烯为单体、二乙烯基苯为交联剂,通过优化反应条件,制备了平均粒径为3.28～9.04 μm的单分散聚苯乙烯微球和平均粒径为6.60 μm的单分散交联聚苯乙烯微球.探讨了单体浓度、引发剂含量、分散稳定剂用量对微球粒径和分散性的影响.热稳定性分析表明:交联聚苯乙烯微球耐热性明显优于线性聚苯乙烯.     

Dispersion copolymerization of acrylamide with quaternary ammonium cationic monomer in aqueous salts solution

Dispersion copolymerization of acrylamide (AM) with 2-methylacryloylxyethyl trimethyl ammonium chloride (DMC) has been carried out in aqueous salts solution containing ammonium sulfate and sodium chloride with poly(acryloylxyethyl trimethyl ammonium chloride) (PDAC) as the stabilizer and 2,2′-azobis[2-(2-inidazolin-2-yl)propane]-dihydro chloride (VA-044) as the initiator. A new particle formation mechanism of the dispersion polymerization for the present system has been proposed. The effects of inorganic salts and stabilizer concentration on dispersion polymerization have been investigated. The results show that varying the salt concentration could affect the morphology and molecular weight of the resultant copolymer particles significantly. With increasing the stabilizer concentration, the particle size decreased at first and then increased, meanwhile the effect on the copolymer molecular weight was the contrary. These results had been rationalized based on the proposed mechanism.     

水介质中丙烯酸的分散聚合

丙烯酸聚合物及其与其它水性单体的共聚物是一类非常重要的水溶性高分子化合物, 具有许多优异的性能, 广泛应用于环保、 石油化工、 造纸和食品卫生等行业^[1]. 丙烯酸聚合物一般采用水溶液、 反相悬浮及反相乳液法制备, 但这些方法存在诸如反应体系粘度高, 不易散热、 使用不方便, 由于使用有机溶剂和表面活性剂易对环境造成二次污染等问题^[2].近些年, 由日本率先研制开发的以水为溶剂分散型高浓度﹑高分子量的新型水溶性高分子产品, 克服了传统合成方式和产品剂型等诸多问题, 极大地拓宽了其使用领域[^3~5]. 有关水介质中水溶性单体分散聚合的研究报道很少^[6~8].而针对于丙烯酸在水介质中的研究报道则更少[^9] , 大部分工作为专利文献.     

苯乙烯/二乙烯基苯在乙醇/乙二醇单甲醚中分散共聚合速率及粒子大小的研究

以乙醇 乙二醇单甲醚 (EOH EGME)为介质 ,羟丙基纤维素 (HPC)为稳定剂 ,偶氮二异丁腈 (AIBN)为引发剂进行了苯乙烯和二乙烯基苯的分散共聚合研究 .制得粒径在 6～ 10 μm范围内的单分散交联聚苯乙烯微球 (CPS) .探讨了不同介质配比 ,以及苯乙烯、二乙烯基苯、引发剂的浓度对微球大小、粒径分布、聚合速率及稳定性的影响 .当苯乙烯和AIBN浓度增加时 ,聚合速率和平均粒子尺寸增加 ,而粒子分布变宽 ,粒子数先增加 ,而后降低 .随着EOH EGME比例的增加 ,平均粒子尺寸增加 ,而分布指数降低 ,稳定剂增加 ,粒子尺寸降低和粒子数增加 ,但对聚合速率及粒子分布影响不太明显 .另外还探讨了单体和交联剂的后滴加法对微球大小、粒径分布的影响     

Preparation,characterization, and performance of a novel hollow fiber nanofiltration membrane

Nanofiltration (NF) grade hollow fiber membrane was prepared by incorporation of zinc chloride into polysulfone–polyethylene glycol (molecular weight 200) blend. A 1.0 wt% zinc chloride in the blend reduced the molecular weight cut off (MWCO) of hollow fibers from 44 kDa (average pore size 64A⁰) to a nanofiltration range of MWCO 870 Da (average pore size 7.69 A^°). MWCO decreased further to 330 Da (average pore size 4.78 A^°) on addition of 2.5 wt% zinc chloride. types of NF hollow fiber were spun, corresponding to zinc chloride concentration of 1.0, 1.5, 2.0, and 2.5 wt%. Ternary phase diagram qualitatively explained the denser morphology for various concentrations of zinc chloride. This was supported by scanning electron micrographs of cross‐section and top surface of hollow fibers. NF membranes possessed negative surface charge at extreme pH conditions. Rejection of 1000 mg/l sodium chloride solution was in between 38 to 45% at pH 11, and for divalent sodium sulfate, it was in the range of 55 to 62%. Rejection of dye congo red was found to be 100%. NF membranes showed reasonable antifouling characteristics having flux recovery ratio of more than 90% and a flux decline ratio of less than 10%. Copyright © 2015 John Wiley & Sons, Ltd.     

Radiation-induced polymerization of methyl methacrylate in microemulsion with high monomer content

γ-Ray-induced polymerization of methyl methacrylate was conducted in a microemulsion stabilized by a mixture of sodium of 12-acryloxy-9-octadecenoic acid (AOA) and sodium dodecyl sulfate (SDS) with various weight ratios at room temperature. The experimental data showed that the mixture of AOA and SDS with a weight ratio 2 was an efficient surfactant system for the microemulsion containing 38.6 wt% MMA and 5.5 wt% surfactant. The effects of MMA concentration and dose rate on the polymerization kinetics and particle size are discussed.     

Solubility and binding properties of PEGylated lysozyme derivatives with increasing molecular weight on hydrophobic-interaction chromatographic resins

Dynamic binding capacities and resolution of PEGylated lysozyme derivatives with varying molecular weights of poly (ethylene) glycol (PEG) with 5 kDa, 10 kDa and 30 kDa for HIC resins and columns are presented. To find the optimal range for the operating conditions, solubility studies were performed by high-throughput analyses in a 96-well plate format, and optimal salt concentrations and pH values were determined. The solubility of PEG-proteins was strongly influenced by the length of the PEG moiety. Large differences in the solubilities of PEGylated lysozymes in two different salts, ammonium sulfate and sodium chloride were found. Solubility of PEGylated lysozyme derivatives in ammonium sulfate decreases with increased length of attached PEG chains. In sodium chloride all PEGylated lysozyme derivatives are fully soluble in a concentration range between 0.1 mg protein/ml and 10 mg protein/ml. The binding capacities for PEGylated lysozyme to HIC resins are dependent on the salt type and molecular weight of the PEG polymer. In both salt solutions, ammonium sulfate and sodium chloride, the highest binding capacity of the resin was found for 5 kDa PEGylated lysozyme. For both native lysozyme and 30 kDa mono-PEGylated lysozyme the binding capacities were lower. In separation experiments on a TSKgel Butyl-NPR hydrophobic-interaction column with ammonium sulfate as mobile phase, the elution order was: native lysozyme, 5 kDa mono-PEGylated lysozyme and oligo-PEGylated lysozyme. This elution order was found to be reversed when sodium chloride was used. Furthermore, the resolution of the three mono-PEGylated forms was not possible with this column and ammonium sulfate as mobile phase. In 4 M sodium chloride a resolution of all PEGylated lysozyme forms was achieved. A tentative explanation for these phenomena can be the increased solvation of the PEG polymers in sodium chloride which changes the usual attractive hydrophobic forces in ammonium sulfate to more repulsive hydration forces in this hydrotrophic salt.     

Dispersion Polymerization of Methyl Methacrylate in Supercritical Carbon Dioxide: Control of Molecular Weight Distribution by Adjusting Particle Surface Area

Summary: Experiments of methyl methacrylate dispersion polymerization are carried out in a reaction calorimeter using PDMS-mMA as surfactant. Different stabilizer concentrations from 0 to 10 wt% with respect to monomer have been considered in order to control particle morphology. The analysis by scanning electron microscopy reveals a definite decrease of the total particle surface area at decreasing stabilizer concentration. At the same time, the analysis of the polymer microstructure by gel permeation chromatography shows a trend of the average molecular weight towards smaller values. In particular, a second mode at low molecular weights has been observed leading to bimodal molecular weight distributions. The experimental results are compared with simulation results obtained through a detailed kinetic model developed in previous studies. 1 The key role of the radical exchange between continuous and dispersed phases is confirmed.     

NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEXw

 Nano-sized polyacrylonitrile (PAN) particles were prepared under the catalytic effect of in situ developed CoCl₂/EDTA complex with ammonium persulfate as the initiator in the absence of any added emulsifier. The emulsion polymerization was studied at varying concentrations of the initiator, monomer, complex and solvent over a temperature range of 30-70^oC. The overall activation energy (Ea, 49.79 kJ/mol), energy of dissociation of initiator (Ed, 82.68 kJ/mol), number of micelles (0.163 x 1018) and the viscosity average molecular weight of the polymer were computed. The distribution of particle sizes was determined by transmission electron microscopy (TEM). It was found that the oil-in-water polymerization was stabilized by the presence of the CoCl₂/EDTA in situ complex reducing the particle size into the nano order. The average diameters of PAN nano particles, obtained by TEM, were in the range of 50–150 nm at the maximum conversion. The experimental particle size was mainly dependent on the concentration of the complex and temperature.     

分散共聚法制备窄分布P(St-co-nBA)微球

用分散共聚法制得窄分布苯乙烯(St)和丙烯酸正丁酯(nBA)的共聚物微球.采用1H-NMR、DSC、FTIR、SEM、LS等对共聚物的结构、形态、性能进行表征,考察了初始单体配比、温度、稳定剂浓度、分散介质极性、引发剂对微球粒径、粒径分布及转化率的影响.实验结果表明,初始单体比nBA/St增大,微球粒径增大,分布变宽,...