An efficient and facile synthesis of substituted cinnoline and benzo[h]cinnoline derivatives

New substituted 3-amino-5,7,8-trihalo-6-hydroxycinnoline-4-carbonitriles 7 and 8 and the 3-amino-5-chloro-6-hydroxy-benzo[h]cinnoline-4-carbonitrile 9 were synthesized in two-steps starting from tetrahalo-1,4-benzoquinones or dichloro-1,4-naphthoquinones, malononitrile and hydrazine.     

Synthesis,characterization and catalytic activity of halo-methyl-bis(salicylaldehyde)ethylenediamine cobalt(II) complexes

The synthesis, characterization and catalytic activity of a series of tetra-halo-dimethyl salen and di-halo-tetramethyl-salen ligands are reported in this paper: α,α′-dimethyl-Salen (dMeSalen) (L¹); 3,3′,5,5′-tetrachloro-α,α′-dimethyl-Salen, (tCldMeSalen) (L²); 3,3′-dibromo-5,5′-dichloro-α,α′-dimethyl-Salen, (dCldBrdMeSalen) (L³); 3,3′,5,5′-tetrabromo-α,α′-dimethyl-Salen, (tBrdMeSalen) (L⁴); 3,3′,5,5′-tetraiodo-α,α′-dimethyl-salen, (tIdMeSalen) (L⁵); 3,3′-dichloro-5,5′,α,α′-tetramethyl-Salen (dCltMeSalen) (L⁶); 3,3′-dibromo-5,5′,α,α′-tetramethyl-Salen (dBrtMeSalen) (L⁷); and 3,3′-diiodo-5,5′,α,α′-tetramethyl-Salen (dItMeSalen) (L⁸) (Salen = bis(salicylaldehyde)ethylenediamine). Upon reaction with Co(II) ions, these ligands form complexes with square planar geometry that have been characterized by elemental analysis, cyclic voltammetry, UV–Vis, IR and EPR spectroscopies. In the presence of pyridine the obtained Co(II) complexes were found able to bind reversibly O₂, which was shown by EPR spectroscopy and cyclic voltammetry. They were also found able to catalyze the oxidation of 2,6-di-tert-butylphenol (DtBuP) (9) with formation of 2,6-di-tert-butyl-1,4-benzoquinone (DtBuQ) (10) and 2,6,2′,6′-tetra-tert-butyl-1,1′-diphenobenzoquinone (TtBuDQ) (11). These properties are first influenced by the coordination of pyridine in axial position of the Co(II) ion that causes an increase of the electronic density on the cobalt ion and as a consequence a decrease in the E_1/2 value and an increase of the reducing power of the Co(II) complex. It is noteworthy that, under those conditions the complexes also show a remarkable quasi-reversible behaviour. Second, complex properties are also influenced by the substituents (methyl and halogen) grafted on the aromatic ring and on the azomethynic groups. The donating methyl substituent on the azomethynic groups causes a decrease in the E_1/2 value, whereas the halogen substituents on the aromatic rings have two effects: a mesomeric donating effect that tends to lower the redox potential of the complex, and a steric effect that tends to decrease the conjugation of the ligand and then to increase the redox potential of the Co(II) complex. In pyridine, the steric effect predominates, which causes both an increase of the redox potential and a decrease of the selectivity of the oxidation of phenol 9. As a result of all these effects, it then appears that the best catalysts to realize the selective oxidation of 2,6-di-tert-butyl-phenol (9) by O₂ are the Co complexes of ligands bearing CH₃ donating substituents, Co(dMeSalen) 1 (2CH₃ substituents), and Co-di-halo-tetra-methyl-salen complexes 6, 7 and 8 (4CH₃ substituents), in the presence of pyridine.     

The degradation of 4,5-dichloro-1,2,3-dithiazolium chloride in wet solvents

4,5-Dichloro-1,2,3-dithiazolium chloride 1 (Appel salt) reacts in wet DCM, THF or MeCN to give elemental sulfur, dithiazole-5-thione 4, dithiazol-5-one 5 and thiazol-5-one 6. Furthermore the reaction of 2-phenylthiazol-5(4H)-one 12 with Appel salt 1 at ca. 20 °C gives 4-(4-chloro-5H-1,2,3-dithiazol-5-ylidene)-2-phenylthiazol-5(4H)-one 13 (26%) while at ca. 82 °C a new product 2,2′-diphenyl-4,4′-bithiazol-ylidene-5,5′-dione 14 (36%) is additionally isolated. Finally, 4,4′-bithiazolylidene-5,5′-dione 14 is prepared directly by treating 2-phenylthiazol-5(4H)-one 12 with N-chlorosuccinimide. All new compounds are fully characterised and rational mechanisms are proposed for the formation of all key compounds.     

Efficient bimetallic titanium catalyst for carbonyl-ene reaction

A new family of achiral 3,3′,5,5′-tetrasubstituted-2,2′,6,6′-tetrahydroxy biphenyl ligand 4 was developed. The axial chirality of the ligand could be induced by the chelation of 2,2′,6,6′-tetrahydroxy groups with (R)-BINOL-Ti(OⁱPr)₂ to form an axially chiral bimetallic titanium catalyst 9. Compared with (R)-BINOL-Ti(OⁱPr)₂ catalyst, this novel catalyst 9 exhibited excellent activity and enantioselectivity for the carbonyl-ene reaction of methylstyrene and ethyl glyoxylate. 3,3′,5,5′-Tetrasubstituted groups showed a remarkable effect on both enantioselectivity and yield. With 9d prepared from 3,3′,5,5′-tetramethyl-2,2′,6,6′-tetrahydroxy biphenyl 4d as the catalyst, the best result, up to 97.6% ee and 99% yield, was obtained. Additionally, the bimetallic catalyst 9 also showed better catalytic capability than the corresponding monometallic catalyst.     

The novel transition metal free synthesis of 1,1′-biazulene

Reaction of 1-azulenyl methyl sulfoxide (1) under acidic conditions gave the 1,1′-biazulene derivative 3. Methylmercapt groups of 3 were readily converted to formyl groups by Vilsmeier reaction to afford 3,3′-diformyl-1,1′-biazulene (4), which reacted with pyrrole in the presence of acetic acid to give the parent 1,1′-biazulene (5). Reaction of 5 with pyridine in the presence of Tf₂O gave 3,3′-dihydropyridyl-1,1′-biazulene derivative 6. 3,3′-(4-Pyridyl)-1,1′-biazulene (7) was obtained by the reaction of 3 with KOH in EtOH at room temperature in good yield.     

5′-Noraristeromycin possessing a C-1′ cyclopentyl double bond: a new carbanucleoside structural prototype

Prior to this work only two examples of carbanucleosides possessing a C-1′/C-6′ double bond had been reported and they were minor derivatized side products arising during other targeted syntheses. To develop this structural feature into a new class of potential antiviral agents, the 5′-nor derivative of aristeromycin with such an olefinic structure (6) represents the first example. In this regard, treatment of (1′S,2′S,3′S,4′R,5′S)-6-chloro-9-(2′,3′-isopropylidenedioxy-6′-oxabicyclo[3.1.0]hex-4′-yl)purine (7) with sodium methoxide yielded 6 via an E′₂-like elimination pathway. A convenient way to the C-4′ epimer of 6 (that is, 17) also arose during these studies and is described. Antiviral analysis of 6 and 17 failed to produce any significant activity.     

Amberlyst 15 catalyzed synthesis of indole-pyrazole based tri(hetero)arylmethanes

An expedient synthesis of 1,3-diaryl-4-(3,3′-diindolyl)methylpyrazoles 3a-m has been developed using Amberlyst 15 catalyzed condensation of 1,3-diaryl-4-formyl pyrazoles 2 with indoles 1. This reaction was further extended to the synthesis of 4,4′-bis(3,3′-diindolyl)methylphenoxy-alkanes 5a-b by coupling of 4,4′-di(formylphenoxy)alkane 4 with indole 1.     

7-Deaza-2,8-diazaadenine containing oligonucleotides: synthesis, ring opening and base pairing of 7-halogenated nucleosides

Oligonucleotides containing 7-bromo-7-deaza-2,8-diaza-2′-deoxyadenosine (3) and 5-amino-3-bromo-4-carbamoyl-1-(2′-deoxy-β-d-erythro-pentofuranosyl)pyrazole (4) were synthesized. Compound 3 was prepared from 7-bromo-8-aza-7-deaza-2′-deoxyadenosine (5) via the 1,N⁶-etheno derivative 6 and was converted into the phosphoramidite 11. The 7-bromo substituent of 3 increases oligonucleotide duplex stability compared to the non-halogenated nucleoside. Oligonucleotides incorporating 3 are transformed to those containing 4 during long time deprotection at elevated temperature (25% aq ammonia, 60 °C, 30 h). Compound 3 forms a strong base pair with dG. The base pair stability decreases in the order dG>dT>dA>dC. Similar recognition selectivity is observed for the pyrazole nucleoside 4, however, due to decreased stacking and higher flexibility of the pyrazole moiety, duplexes are less stable than those containing 3.     

One-pot synthesis of macrocyclic compounds possessing two cyclobutane rings by sequential inter- and intramolecular [2+2] photocycloaddition reactions

Sensitized photocycloaddition reactions of 6,6′-dimethyl-4,4′-[1,3-bis(methylenoxy)phenylene]-di-2-pyrone (1) with electron-poor α,ω-diolefins such as ethylene diacrylate (2a) and polyoxyethylene dimethacrylates (2b-d) afforded site- and stereoselective macrocyclic dioxatetralactones (3a-d) and (4b) having 18- to 25-membered rings across the C5-C6 and C5′-C6′ double bonds, or C5-C6 and C3′-C4′ double bonds in 1, respectively. Similar photoreactions of 1 with electron-rich α,ω-diolefins such as poly(ethylene glycol)divinyl ether (2e and 2f) afforded crown ether-type macrocyclic compounds (5e and 5f) having 18- and 21-membered rings across the C3-C4 and C3′-C4′ double bonds in 1, respectively. The stereochemical features of 3b, 5e-xx, and 5e-nn were determined by the X-ray crystal analysis. The reaction mechanism was inferred by MO methods.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

SnCl4-mediated oxidative biaryl coupling reaction of 1-naphthol and subsequent ring closure of 2,2′-binaphthol to the dinaphthofuran framework

A simple method for the direct synthesis of 2,2′-binaphthols 2 and dinaphtho[1,2-b;2′,1′-d]furans 3 under mild conditions was developed, utilizing a biaryl coupling reaction via electron donor-acceptor complexes of 1-naphthols with SnCl₄. Heating of the complex in a sealed tube for (18-24 h) afforded the corresponding o-o coupled product 2 in excellent yield. Prolonged reaction (56-65 h) under the same conditions afforded 3 in high yield in one step. We also found that in the case of α-naphthol without substituents other than a hydroxyl group at the C-1 position, regioselective o-o coupling reaction proceeded. The products 2a, 2b and 2g should be useful as synthetic intermediates for naturally occurring 3,3′-bijuglone, 3,3′-biplumbagin and elliptinone.     

Investigation of hydrazine addition to functionalized furans: synthesis of new functionalized 4,4′-bipyrazole derivatives

The addition of hydrazine to functionalized furans 2a-d leads to a variety of 4,4′-bipyrazoles 4a-c depending on the structure of the starting materials. In one example, compound 2c was first converted to an intermediate, furo[3,4-d]pyridazine 3c which was then transformed into 4,4′-bipyrazole 4c on reacting with hydrazine.     

Synthesis of new compounds containing the 2,3-dihydro[1,4]dioxino[2,3-b]pyridine heterocyclic system as a substructure

2,3-Dihydro-spiro[1,4]dioxino[2,3-b]pyridine-3,3′-pyrrolidine (8A) and 2,3-dihydro-spiro[1,4]dioxino[2,3-b]pyridine-3,4′-piperidine (9A) have been synthesized from 2-chloro-3-pyridinol. The corresponding 2,3′ (8B) and 2,4′ (9B) isomers were obtained via the Smiles rearrangement, while 9B was also selectively synthesized from 2-nitro-3-pyridinol. The separation of the isomers A and B under the sulfamide form was carried out by flash column chromatography. Subsequent transformations of the corresponding dioxinopyridine derivatives were described.     

Regioselective hydrodehalogenation of 3,5-dihaloisothiazole-4-carbonitriles: synthesis of 3-haloisothiazole-4-carbonitriles

3,5-Dibromoisothiazole-4-carbonitrile 1 treated with Zn or In dust (5 equiv) and HCO₂H undergoes regioselective hydrodebromination to give 3-bromoisothiazole-4-carbonitrile 3 in 70-74% yield. Similarly, 5-bromo and iodo 3-chloroisothiazole-4-carbonitriles 8 and 9 give 3-chloroisothiazole-4-carbonitrile 4 in 77 and 85% yields, respectively. Also hydrodeamination of 5-amino-3-chloroisothiazole-4-carbonitrile 7 using isoamyl nitrite gives the latter in 95% yield. The dibromoisothiazole 1 reacts with Zn dust in either DCO₂D or HCO₂D to give 3-bromo-5-deuterioisothiazole-4-carbonitrile 10 in 71 and 58% yields, respectively. The 3-bromoisothiazole 3 reacts with cyclic dialkylamines to give the corresponding 2-(dialkylaminomethylene)-malononitriles and not the expected 3-dialkylaminoisothiazole-4-carbonitriles. Finally, the 3-bromoisothiazole 3 is readily converted into both 3-bromoisothiazole-4-carboxamide 19 and the carboxylic acid 20. All products are fully characterized.     

Chiral cyclopentadienyl ruthenium(II) complexes with P,P-ligands derived from (1R,2R)-1,2-diaminocyclohexane: Synthesis,crystal structures and catalytic activity in Diels–Alder reactions

Chiral cyclopentadienyl ruthenium(II) complexes [CpRu(L1–L3)Cl] (5–7) have been prepared by reaction of [CpRu(PPh₃)₂Cl] with chiral P,P-ligands (1R,2R)-1,2-bis(diphenylphosphinamino)cyclohexane (L1), N,N′-[bis-(3,3′-bis-tert-butyl-5,5′-bis-methoxy-1,1′-biphenyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L2) and N,N′-[bis-(R)-1,1′-binaphtyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L3). The molecular structures of 5 and 6 have been determined by single-crystal X-ray analysis. Studies on catalytic activity of the cations derived from (5–7) by treatment with AgSbF₆, are also reported.     

Unexpectedly low affinity of aromatic disulfides for π-stacking interactions of the arene-polyfluoroarene type

1,2,3,4,5-Pentafluorodiphenyl disulfide (1) was synthesized from C₆F₅SCl and C₆H₅SSiMe₃ in quantitative yield. The homo-crystals of disulfide 1 and co-crystals of 1,1′,2,2′,3,3′,4,4′,5,5′-decafluorodiphenyl disulfide (2) with naphthalene (stoichiometry 1:2, complex 4) and diphenyl disulfide (3) with octafluoronaphthalene (stoichiometry 2:1, complex 5) were prepared followed by XRD characterization. In the crystal lattice of 1, face-to-face and face-to-edge Ph_H/Ph_F orientations of neighboring rings were observed together with face-to-edge Ph_F/Ph_F orientations. For the face-to-face Ph_H/Ph_F orientation, the large offset of Ph_H and Ph_F groups excludes their π-stacking interaction which is very non-typical of the field. The crystal lattice of 4 reveals standard π-stacking interactions of the arene-polyfluoroarene type. While in the lattice of 4 each Ph_F ring interacts alternating with naphthalenes, in 5 two disulfides 3 are bridged by one octafluoronaphthalene with only one of the Ph_H rings of each disulfide interacting with the polyfluoroarene π-system. The large offset of neighboring molecules excludes however their π-stacking interactions in complex 5. An attempt to prepare 2/3 co-crystals failed.     

A facile synthesis of pyrrolo[1,2-a]benzimidazoles and pyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazole derivatives

Reaction of 2-cyanomethylbenzimidazole 1 with hydrazonoyl halides 2 led to formation of pyrrolo[1,2-a]benzimidazole derivatives 7. Similar reaction of 1 with halides 3 afforded 5-amino-4-(benzimidazol-2-yl)pyrazole derivatives 11 or 1-amino-2-arylpyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazol-4-one 14 depending on the reaction conditions. The mechanisms of the studied reactions are discussed.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 7a-c were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 3a-c with bis-amidrazone 4 and 2,5-norbornadiene 6 in ethanol at reflux. Compounds 3a and 3b gave the 2,2′:6′,2″-terpyridines 9a and 9b, respectively, in moderate yield when treated with compound 4 and enamine 8.     

The preparation of dicyano-1,3,4-thiadiazole and tricyanothiazole via 1,2,3-dithiazole chemistry

Treatment of 1,2-bis(4-chloro-5H-1,2,3-dithiazol-5-ylidene)hydrazine 4 with benzyltriethylammonium iodide (1 equiv) affords dicyano-1,3,4-thiadiazole 3 and 5-cyano-1,3,4-thiadiazole-2-carboxamide 5 in 79 and 21% yields, respectively. By using polymer bound triphenylphosphine instead of benzyltriethylammonium iodide the dicyano-1,3,4-thiadiazole 3 can be isolated in 70% yield without chromatography. The reaction of DAMN with Appel salt 8 gave 2-(4-chloro-5H-1,2,3-dithiazol-5-ylideneamino)-2-(4-chloro-5H-1,2,3-dithiazol-5-ylidene)acetonitrile 7 (14%), 2,3-bis-(4-chloro-5H-1,2,3-dithiazol-5-ylideneamino)fumaronitrile 10 (14%), and 2,3-bis(4-chloro-5H-1,2,3-dithiazol-5-ylideneamino)maleonitrile 11 (24%) together with other products. The maleonitrile 11 isomerizes into the fumaronitrile 10 on irradiation at 365 nm. Reaction of aminoacetonitrile with Appel salt 8 gives the (dithiazolylidene)acetonitrile 7 in 33% yield. Treatment of (dithiazolylidene)acetonitrile 7 with polymer bound triphenylphosphine gives tricyanothiazole 6 in 76% yield. A rational general mechanism for the transformation of bisdithiazoles to percyanoheteroles is proposed.     

Preparation of 6-chloropyrazolo[3,4-b]pyridine-5-carbaldehydes by Vilsmeier-Haack reaction and its use in the synthesis of heterocyclic chalcones and dipyrazolopyridines

Novel 6-chloropyrazolo[3,4-b]pyridine-5-carbaldehydes 5 have been synthesized from the 4,5-dihydropyrazolo[3,4-b]pyridine-6-ones 4 via Vilsmeier-Haack reaction. Further treatment of carbaldehydes 5 with acetophenones 6 and hydrazine hydrate afforded chalcone analogues 7 and dipyrazolo[3,4-b:4′,3′-e]pyridines 8, respectively.