Highly chemoselective nitration of aromatic amines using the Ph3P/Br2/AgNO3 system

The use of PPh₃/Br₂/AgNO₃ provides a new reagent system for the novel and highly chemoselective nitration of aromatic amines under mild reaction conditions.     

Alumina encapsulated phosphorus pentasulfide (P4S10/Al2O3) mediated efficient thionation of long chain amides

Alumina encapsulated phosphorus pentasulfide (P₄S₁₀/Al₂O₃) was found to be an efficient solid supported reagent for the thionation of long chain amides. This method is advantageous in terms of use of inexpensive reagent, simple reaction processing, and clean product in good to excellent yield.     

[Cd2(tren)2(dl-alaninato)](ClO4)3: an efficient water-compatible Lewis acid catalyst for chemo-, regio-, and diastereo-selective allylation of various aldehydes

The use of [Cd₂(tren)₂(dl-alaninato)](ClO₄)₃·H₂O (I) (tren = tris(2-aminoethyl)amine) as an efficient water-compatible Lewis acid catalyst for the allylation of aldehydes in aqueous media was described. The reaction proceeded smoothly to afford the corresponding homoallyl alcohols in up to 96% yield. Additionally, cinnamyltributylstannane was selected as the allylation reagent, the regio- and diastereoselectivity of the reaction favors the formation of the γ-product and the anti isomers, respectively.     

Silica-supported HgSO4/H2SO4: a convenient reagent for the hydration of alkynes under mild conditions

The silica-supported aqueous-phase catalyst (SAPC) approach has proven convenient for efficiently performing the hydration of alkynes with HgSO₄/H₂SO₄ to give the corresponding carbonyl compounds in dichloromethane under mild conditions. The use of this solid reagent significantly improves the reaction work-up as it merely involves filtering and evaporating the solvent.     

Epoxidation with the H2O2/vilsmeier reagent system

Alkenes $\text{1}$ a–d interact at ?80°C in 15 min. with the Vilsmeier reagent $\text{I}$ (Me₂N=CHCl)⁺PO₂Cl₂^? in presence of 30% H₂O₂ to yield the corresponding epoxides $\text{3}$ a–d. The reaction could involve the formation of the highly reactive hydroperoxymethylenedimethylammonium salt (Me₂N=CHOOH)⁺PO₂Cl^?₂$\text{II}$.     

Supercritical CO2 improved phosphine imide reaction on peracetylated β-cyclodextrin

Supercritical CO₂ (sCO₂) was successfully used as solvent and reagent in the ‘one-pot’ phosphine imide reaction. In sCO₂ smooth conditions and with or without assistance of triphenylphosphine-bounded polymer, the reaction efficiently leads to the desired urea β-Cd compounds in a short time, bringing an interesting alternative for solving problems of OVC and hazardous reagent substitution in the synthesis of ureido-Cds and, by extension, of urea derivatives.     

One-step synthesis of pentavalent triphenylantimony derivatives Ph3Sb(OSiR3)2, Ph3Sb(OCH2CH2)2NH and Ph3Sb(OCH2CH2NMe2)2: X-ray molecular structure of Ph3Sb(OSiMe3)2

Pentavalent bis(triorganosiloxy)triphenylantimony derivatives, Ph₃Sb(OSiR₃)₂ (R = Me, Ph), were synthesized by reaction of triphenylantimony with trimethyl- or triphenylsilanol in the presence of tert-butylhydroperoxide by the mild reaction conditions (0-5 °C, 2 h). The reaction of triphenylantimony with diethanolamine in the presence of tert-butylhydroperoxide gave the cyclic compound Ph₃Sb(OCH₂CH₂)₂NH. The mixture of Ph₃SbO and Ph₃Sb(OCH₂CH₂NMe₂)₂ was obtained by the reaction of triphenylantimony with 2-(N,N-dimethylamino)ethanol in the presence of tert-butylhydroperoxide.     

[Bmim]NO2/H3BO3 as an effective nitrosonium source for electrophilic aromatic nitrosation under MW-promoted solvent-free conditions

[Bmim]NO₂/H₃BO₃ was used as a nitrosonium source for the efficient synthesis of nitrosoarenes. The reaction was accomplished under MW irradiation at 60 W in a solventless system. Side processes such as oxidation or dealkylation were not observed during the nitrosation of alkyl phenyl ethers in the presence of this new reagent. The satisfactory results were obtained with very short reaction time, simplicity in the experimental procedure and good to excellent yields.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

稀土固体超强酸SO42-/TiO2/La3+催化合成丁酸异戊酯

The synthesis of isoamyl butyrate with isoamyl alcohol and butyric acid as reactants and rare-earth solid superacid SO₄^2-/TiO₂/La³⁺ as catalyst had been studied.The influent actors of reaction were investigated.The results showed that the appropriate conditions should be: Weight of catalyst was 0.5g (weight of butyric acid if 0.2mol); molar ratio of isoamyl alcohol to butyric acid was 1.8: 1; reaction time was 2.0 h; the taking water reagent (Toluene) was 15mL.The yield of isoamyl butyrate was about 99.0%.     

超声化学法制备不同形貌的CaF2微米晶

采用超声化学法,以CaCl2与不同氟源(NaBF4、K2SiF6)在溶液中反应,制得了不同形貌的CaF2微米晶(立方体、花状、多面体)。用XRD、SEM及TEM对产物晶相及形貌进行了表征。XRD结果显示所有产物均为结晶良好的立方相CaF2。SEM及TEM结果表明由NaBF4制得的产物形貌为均匀的立方体微米晶,而由K2SiF6制得的产物为多面体。在添加配体Na2EDTA的情况下,由NaBF4得到的产物为纳米片组成的花状结构。本文详细讨论了氟源种类、反应物比例、配体等反应参数对产物CaF2形貌的影响,并提出了可能的反应机理。     

Untersuchungen zum reaktiven verhalten von (CF3)2PPH2 und (CF3)2AsPH2

Cleavage of the E-P bond in compounds of the type (CF₃)₂EPh₂(E = P, As) is achieved by polar [HBr, (CF₃)₂EI, (CH₃)₃SnH, (CF₃)₂AsH] and non-polar [Br₂, Mn₂(CO)₁₀] substances. Exchange reactions are possible with (CF₃₄)E₂ and P₂F₄ leading to the unsymmetrical compounds (CF₃)₂PPF₂, (CF₃)₂AsPF₂, (CF₃)₂PAs(CF₃)₂, F₂PPH₂, (CF₃)₂AsPH₂. The reaction of (CF₃)₂PPH₂ with Mn₂(CO)₁₀ gives the new binuclear complex Mn₂(CO)₈PH₂P(CF₃)₂ and Mn₂(CO)₈[P(CF₃)₂]₂. The hitherto unknown compound (CF₃)₂AsPF₂ is obtained by the reaction of (CF₃)₂AsPH₂ with P₂F₄. Adducts of (CF₃)₂PPH₂ with B₂H₆ and (CH₃)₃N, respectively, are discussed. Investigation of the reaction route and characterization of most of the reaction product is based on ¹H and ¹⁹F NMR spectral data.     

CrOx/SiO2催化剂上丙烷在CO2气氛中脱氢反应的研究

采用XRD、UV-vis DRS、ESR和微分吸附量热等技术,考察了铬担载量分别为2.5、5和10wt%的CrO_x/SiO₂催化剂的结构、表面性质和氧化还原性能。结果表明,催化剂表面上存在多种Cr的氧化态和聚集形式。随着Cr担载量从2.5wt%到10wt%的逐渐增大,催化剂表面占主导地位的Cr物种由CrO₃单体转为多聚CrO₃和Cr₂O₃晶相。在CO₂气氛中催化剂对丙烷转化率和丙烯选择性的大小顺序为2.5wt%CrO_x/SiO₂>5wt%CrO_x/SiO₂>10wt%CrO_x/SiO₂,反应过程中的原位ESR和UV-visDRS测定结果表明,催化剂表面的反应活性中心为Cr⁵⁺,Cr⁵⁺可由催化剂预处理过程中Cr³⁺的氧化及丙烷反应过程中CrO₃单体的还原产生,在反应中CO₂可使Cr³⁺重新氧化为Cr⁵⁺.     

Photodissociation of the dimer ions Ar+2, Ne+2, and (CO2)+2

The tandem quadrupole photodissociation mass spectrometer has been used to study photodissociation reactions of Ar⁺₂, Ne⁺₂, and (CO₂)⁺₂. The cross sections for photodissociation of Ar⁺₂ exhibited a strong dependence on ion source pressure, varying from 2 × 10 ^?18cm² at 0.1 torr to 6 × 10^?19cm² at 0.5 torr. A large photodissociation cross section (2 × 10^?17cm² for the reaction (CO₂)⁺₂ → CO⁺₂+ CO₂ was observed at the red end of the visible spectrum (580–620 nm) suggesting that this may be an important reaction in CO₂ rich planetary ionspheres such as that of Mars.     

Synthesis and X-ray crystallographic structures of [HGa(NMe2)2]2 and [PhGa(NHNMe2)2]2, and room-temperature conversions of [HGa(NMe2)2]2 to (HGaNH)n and (HGaNMe)n

The reactivity of bis(dimethylamido) complexes of phenyl- and hydridogallium with ammonia, dimethylamine and 1,1-dimethylhydrazine is described. Synthesis of the starting gallium hydride, [HGa(NMe₂)₂]₂, was achieved in nearly quantitative yield from the reaction of HGaCl₂(quinuclidine) with LiNMe₂. In neat ammonia or methylamine at room temperature both dimethylamido ligands in [HGa(NMe₂)₂]₂ were substituted by a single equivalent of NH₃ or MeNH₂ to produce amorphous (HGaNH)_n or (HGaNMe)_n, respectively. In contrast, the reaction of [PhGa(NMe₂)₂]₂ with neat Me₂NNH₂, at room temperature consumed two equivalents of the substituted hydrazine to form [PhGa(NHNMe₂)₂]₂ in a 73% yield. Single crystal X-ray crystallographic analyses of [HGa(NMe₂)₂]₂ and [PhGa(NHNMe₂)₂]₂ establish that in the solid state both compounds adopt a cyclic Ga-N-Ga-N structure with a crystallographic center of symmetry located at the center of the ring.     

Beam-gas chemiluminescent reactions of Cu(2D) with Cl2, Br2, and I2

Chemiluminescent reactions involving copper and halogen molecules are shown to result from the bimolecular reaction of metastable Cu(²D) with Cl₂, Br₂, and I₂ under single-collision conditions. The collision-energy dependence of the reactions is described by a hard-sphere model with zero threshold energy. Cross sections for these reactions are compared with that for chemiluminescent reaction of Cu(²S) with F₂.     

LiCoO2对LiMn2O4改性过程的研究

在LiCoO2、LiMn2O4、LiNiO2这三种锂离子电池正极材料中,尖晶石LiMn2O4由于具有价廉、对环境友好、使用安全的显著优点,被普遍认为是最有希望的新型正极材料。但该材料在高温下较快的容量衰减制约了其规模应用[1~3]。为改善LiMn2O4的高温性能,各国学者普遍采用掺杂法,即在制备L     

Hydroboration or hydrogenation of alkenes with CoCl2-NaBH4

The CoCl₂-NaBH₄ reagent hydroborates or hydrogenates alkenes under appropriate conditions.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

Chemiluminescence mapping. I. Experimental method and initial measurments on the D+F2 and F+D2 reactions

Measurements by a new experimental chemiluminescence method of the nascent DF product vibrational distribution confirm earlier findings for the F + D₂ → DF(ν?4) + D reaction. The distribution for D + F₂ → DF(ν?15) + F shows a larger fraction (≈ 78%) of the reaction exothermicity channeled into product vibration than is observed by conventional chemiluminescence measurements on the parallel H + F₂ system (58%). The new method, termed chemiluminescence mapping for its simultaneous recording of spectrally and temporally resolved chemiluminescence, differs from the earlier arrested relaxation and measured relaxation techniques by the introduction of a short duty cycle pulsed molecular reagent source, a modified deuterium dissociation source, and signal averaged (time resolved), detection of the DF infrared emission. The chemiluminescence mapping technique results for D + F₂ and F + D₂, are presented; apparent deviation from the energy distribution in the H + F₂ system is discussed.