Effects of the desalination chamber design on the mass-transfer characteristics of electrodialysis apparatuses at overlimiting current densities

The overlimiting current modes are being increasingly used in electrodialysis (ED) of dilute aqueous solutions. Of great importance is establishing a relationship between the design of ED apparatuses and the character of phenomena observed at overlimiting current densities, primarily, electroconvection and H⁺ and OH^? ion generation during water dissociation at the membrane-solution interface. In this work, we analyze the factors governing the efficiency of dilute solutions using modern theoretical concepts and experimental data obtained in laboratory cells and large-scale electrodialysis apparatuses. We also analyze the relationship between the mechanisms of the overlimiting transfer and the design of the desalinating channel. ED apparatuses of different types are considered, namely, apparatuses with profiled membranes, inert spacers, monolayer of ionite granules, and dipolar fillers of unwoven ionite fibers. The optimum concentration ranges of the desalinated solutions were found, and the operating conditions of membrane stacks, providing maximum overlimiting ion transfer, were determined.     

Protein nanopores with covalently attached molecular adapters

Molecular adapters are crucial for the stochastic sensing of organic analytes with alpha-hemolysin (alphaHL) protein nanopores when direct interactions between analytes and the pore cannot readily be arranged by conventional protein engineering. In our earlier studies, cyclodextrin adapters were lodged noncovalently within the lumen of the alphaHL pore. In the present work, we have realized the controlled covalent attachment of a beta-cyclodextrin (betaCD) adapter in the two possible molecular orientations inside alphaHL pores prepared by genetic engineering. There are two advantages to such a covalent system. First, the adapter cannot dissociate, which means there are no gaps during stochastic detection, a crucial advance for single-molecule exonuclease DNA sequencing where the continuous presence of a molecular adapter will be essential for reading individual nucleotides. Second, the ability to orient the adapter allows analytes to bind through only one of the two entrances to the betaCD cavity. We demonstrate that the covalently attached adapters can be used to alter the ion selectivity of the alphaHL pore, examine binding events at elevated temperatures, and detect analytes with prolonged dwell times.     

Classification of nozzles of mass transfer apparatuses

The detailed classification of nozzles of heat and mass transfer apparatuses is proposed. Examples of the constructive design of new types of domestic and foreign disordered and ordered nozzles are given.     

Direct determination of adsorption heats

Energy changes occurring during adsorption in gas-solid and solution-solid systems are considered in connection with measurement of the adsorption enthalpies. Some experimental apparatuses allowing determination both of heat evolved and adsorbed amounts are described, with special regard to those using heat-flow microcalorimeters. Calibration techniques and experimental data reliability are also discussed.     

Time-of-flight small-angle scattering spectrometers on pulsed neutron sources

The operation principles, constructions, advantages and shortcomings of the known Time-of-Flight Small-Angle Neutron Scattering (TOF SANS) spectrometers built up on pulsed neutron sources are reviewed. The most important characteristics of TOF SANS apparatuses are rather a high luminosity and the possibility of measurement in an extremely wide range of the scattering vector at a single exposure. This is achieved by simultaneous employment of the white beam, TOF technique for Λ-scan and the commonly known θ-scan. However, the electronic equipment, data-matching programs and the measurement procedure, necessary for accurate normalization of experimental data and their transformation into absolute cross-section scale - they all become more complex as compared with those for SANS apparatuses operating on steady-state neutron sources, where only θ -scan is used.     

Evolution of the granule-size distribution function in drum apparatuses

Problems of experimental and theoretical study and analysis of granule-size distribution in the course of granulation of powdered superphosphates in drum apparatuses are considered. The theoretical study is based on analytical solution of Fokker-Planck stochastic equation determining the evolution of the granule-size distribution function.     

Rising the Efficiency of the Isoprene Bulk Polymerization Apparatuses

Russian Journal of Applied Chemistry - The field of temperatures and conversions in the catalytic process of bulk polymerization of isoprene in apparatuses with a fixed bed of the reaction mixture...     

Physicochemical measuring methods for end-point determination in organic elemental microanalysis

In the last 10 years a series of physicochemical methods of measuring have been developed which could replace the classic weighing of combustion products in microelemental analysis. Microelemental analysis can be automated using these methods. The measuring principle and the commercial apparatuses for determining carbon, hydrogen, nitrogen, and oxygen are discussed extensively.     

Programmable one-pot multistep organic synthesis using DNA junctions

A system for multistep DNA-templated synthesis is controlled by the sequential formation of DNA junctions. Reactants are attached to DNA adapters which are brought together by hybridization to DNA template strands. This process can be repeated to allow sequence-controlled oligomer synthesis while maintaining a constant reaction environment, independent of oligomer length, at each reaction step. Synthesis can take place in a single pot containing all required reactive monomers. Different oligomers can be synthesized in parallel in the same vessel, and the products of parallel synthesis can be ligated, reducing the number of reaction steps required to produce an oligomer of a given length.     

Heat transfer in a disc-type DSC apparatus

Several models of DSC apparatuses are given in literature. However, use of these models requires a determination of the values of the components of the apparatus. Based on the theoretical equations of a first order transition in a coupled-cells heat flow DSC, two methods of determination of the values of the resistors and two methods of determination of the heat capacities are given. It seems possible to use these values for desmearing of the DSC experiments.     

Multi‐gel casting apparatus for vertical polyacrylamide gels with in‐built solution flow system and liquid level detectors

PAGE is the most widely used technique for the separation and biochemical analysis of biomolecules. The ever growing field of proteomics and genomics necessitates the analysis of many proteins and nucleic acid samples to understand further about the structure and function of cells. Simultaneous analysis of multiple protein samples often requires casting of many PAGE gels. Several variants of multi‐gel casting/electrophoresis apparatuses are frequently used in research laboratories. Requirement of supplementary gels to match the growing demand for analyzing additional protein samples sometimes become a cause of concern. Available apparatuses are not amenable to and therefore, not recommended for any modification to accommodate additional gel casting units other than what is prescribed by the manufacturer. A novel apparatus is described here for casting multiple PAGE gels comprising four detachable components that provide enhanced practicability and performance of the apparatus. This newly modified apparatus promises to be a reliable source for making multiple gels in less time without hassle. Synchronized functioning of unique components broaden the possibilities of developing inexpensive, safe, and time‐saving multi‐gel casting apparatus. This apparatus can be easily fabricated and modified to accommodate desired number of gel casting units. The estimated cost (∼$300) for fabrication of the main apparatus is very competitive and effortless assembly procedure can be completed within ∼30 min.     

Significant improvement of signal-to-noise ratio in capillary electrophoresis through optimization of aperture width for UV absorption detection.

In capillary electrophoresis (CE), light flux passes through a capillary cell and is in most cases detected photometrically. Due to the thinness of the cell, a part of the light passes through the wall and misses hitting the sample. In most CE apparatuses, incident light is focused by converging lenses in order to condense light beams passing through the capillary. Considering the aberration of lenses and lens effects of capillary, we assumed that light beams inside were approximately parallel. Although the path lengths of light beams vary depending on their tracks, we could estimate the virtual light path length, L, by measuring absorbance when concentration and molar absorptivity of the sample solution were known. A light-restricting device consisting of narrow slits makes effectively L longer and signal intensity higher. On the other hand, noise increases as light width narrows. The signal-to-noise ratio showed a maximum at 68 microm of light width for a capillary with diameter of 75 microm. The optimized L was evaluated by the simulation. The experimental data verified it even in indirect UV detection. Our approach could help to design the optics of CE apparatuses.     

Recent Implementations of Molecular Photoswitches into Smart Materials and Biological Systems

Light is a nearly ideal stimulus for molecular systems. It delivers information encoded in the form of wavelengths and their intensities with high precision in space and time. Light is a mild trigger that does not permanently contaminate targeted samples. Its energy can be reversibly transformed into molecular motion, polarity, or flexibility changes. This leads to sophisticated functions at the supramolecular and macroscopic levels, from light-triggered nanomaterials to photocontrol over biological systems. New methods and molecular adapters of light are reported almost daily. Recently reported applications of photoresponsive systems, particularly azobenzenes, spiropyrans, diarylethenes, and indigoids, for smart materials and photocontrol of biological setups are described herein with the aim to demonstrate that the 21st century has become the Age of Enlightenment—“Le siècle des Lumières”—in molecular sciences.     

Heat transfer in a disc-type DSC apparatus

The literature describes models of DSC apparatuses. However, the use of these models require a precise determination of the values of the resistors and the capacitors of the apparatus. Theoretical equations of a first order transition in a coupled cells heat flux DSC at a constant heating rate are given. It is shown that the value of the resistors and capacitors may be obtained. The influence of resistors product — crucible or crucible — detectors is established.     

Factors affecting the combustion toxicity of polymeric materials

Fire gas toxicity is an essential component of any fire hazard analysis. However, fire toxicity, like flammability, is both scenario and material dependent. A number of different methods exist to assess the fire toxicity, but many of them fail to relate this to a particular fire scenario. Sample thickness alone, in a closed box test such as the NBS Smoke Chamber, is shown to change the fire scenario from well-ventilated to under-ventilated. Data from two flow-through tests, the static tube furnace (NF X 70-100) and the steady state tube furnace (the Purser furnace, BS 7990 and ISO TS 19700) show that there are different patterns of behaviour for different polymers (LDPE, polystyrene, rigid PVC and Nylon 6.6). The predicted toxicities show variation of up to two orders of magnitude with change in fire scenario. They also show change of at least one order of magnitude for different materials in the same fire scenario. Finally, they show that in many cases CO, which is often assumed to be the most, or even the only toxicologically significant fire gas, is of less importance than either HCl, or HCN, when present, and in some cases less important than organo-irritants. Nylon 6.6 shows the highest predicted toxicity, the greatest scenario dependence, and the least sensitivity to different apparatuses, while polystyrene shows the highest sensitivity to the different apparatuses, but the lowest to different fire scenarios. PVC shows high toxicity, mostly due to HCl in the fire effluent, under all fire conditions, and LDPE shows a more progressive increase in toxicity from well-ventilated flaming to both smouldering and under-ventilated flaming.     

Bulk polymerization of isoprene in apparatuses with a fixed bed of the reaction mixture

The possibility of the bulk polymerization of isoprene in the presence of a rare-earth catalyst in apparatuses with a fixed bed of the reaction mixture is investigated. The efficiency of polymerization in the apparatus of a disc construction with a thin reaction-mixture bed providing near-isothermic conditions, a high rate of the process, simple regulation of the thermal mode, and a high content of cis-1,4 units in poly-isoprene is shown.     

Programmable Supra‐Assembly of a DNA Surface Adapter for Tunable Chiral Directional Self‐Assembly of Gold Nanorods

An important challenge in molecular assembly and hierarchical molecular engineering is to control and program the directional self‐assembly into chiral structures. Here, we present a versatile DNA surface adapter that can programmably self‐assemble into various chiral supramolecular architectures, thereby regulating the chiral directional “bonding” of gold nanorods decorated by the surface adapter. Distinct optical chirality relevant to the ensemble conformation is demonstrated from the assembled novel stair‐like and coil‐like gold nanorod chiral metastructures, which is strongly affected by the spatial arrangement of neighboring nanorod pair. Our strategy provides new avenues for fabrication of tunable optical metamaterials by manipulating the directional self‐assembly of nanoparticles using programmable surface adapters.     

Some problerns in adsorption and calorimetric studies of the steps of catalytic processes

Principal side factors as well as technical and procedural peculiarities capable of distorting the results of measurements of adsorbed and desorbed amounts, of falsifying the nature of the processes proceeding in the systems under study, and of promoting artifacts in calorimetric and other studies of gas chemisorption on powders are considered. Modified techniques and procedures allowing the elimination of sources of side phenomena and artifacts and freeing traditional glass static adsorption apparatuses and experimental procedures from undesirable factors and peculiarities are proposed. Some available chemisorption and calorimetric data representing artifacts and also some data that are not artifacts but, due to imperfections of chemisorption techniques, show up as artifacts are presented and discussed. Several applications of the improved techniques and procedures to calorimetric and adsorption studies of the steps of catalytic processes proceeding on the basis of natural gas and of products of its pr     

Some problems in adsorption and calorimetric studies of the steps of catalytic processes

Principal side factors as well as technical and procedural peculiarities capable of distorting the results of measurements of adsorbed and desorbed amounts, of falsifying the nature of the processes proceeding in the systems under study, and of promoting artifacts in calorimetric and other studies of gas chemisorption on powders are considered. Modified techniques and procedures allowing the elimination of sources of side phenomena and artifacts and freeing traditional glass static adsorption apparatuses and experimental procedures from undesirable factors and peculiarities are proposed. Some available chemisorption and calorimetric data representing artifacts and also some data that are not artifacts but,due to imperfections of chemisorption techniques, show up as artifacts are presented and discussed. Several applications of the improved techniques and procedures to calorimetric and adsorption studies of the steps of catalytic processes proceeding on the basis of natural gas and of products of its processing are presented and discussed.     

Anionic polymerization: High vacuum techniques

Anionic polymerization is a powerful tool for the synthesis of a variety of model materials with well‐defined molecular characteristics. However specially designed apparatuses and appropriate high vacuum techniques are needed in order to exclude from the reaction environment all reactive contaminants with the anionic centers. This review describes the basic principles of anionic polymerization as well as detailed experimental methods for the purification of the reagents usually used for the synthesis of model polymeric materials. In addition a few examples of the synthesis of polymers with complex architecture are given. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3211–3234, 2000