Theoretical study of trans-metalation process in palladium-catalyzed borylation of iodobenzene with diboron

Trans-metalation process in the palladium-catalyzed borylation of iodobenzene with diboron was theoretically investigated with the DFT method. Palladium(II) hydroxo phenyl complex, Pd(OH)(Ph)(PH(3))(2), and the fluoro analogue easily undergo the trans-metalation with diboron, B(2)(eg)(2) (eg = -OCH(2)CH(2)O-), to afford Pd(Ph)(Beg)(PH(3))(HO-Beg) and Pd(Ph)(Beg)(PH(3))(F-Beg), respectively, where B(2)(eg)(2) is adopted as a model of bis(pinacolato)diboron used experimentally. The electron re-distribution in the trans-metalation clearly indicates that the B-B bond scission occurs in a heterolytic manner. In the chloro analogue, PdCl(Ph)(PH(3))(2), however, the trans-metalation occurs in a homolytic manner with much difficulty, which is consistent with the experimental result. The significant differences between the chloro complex and the other hydroxo and fluoro complexes are easily interpreted in terms that hydroxo and fluoro ligands can form strongly bonding interaction with B(2)(eg)(2) but the chloro ligand cannot.     

Syntheses, structures, and surface aromaticity of the new carbaalane [(AlH)(6)(AlNMe(3))(2)(CCH(2)R)(6)] (R = Ph, CH(2)SiMe(3)) and a stepwise functionalization of the inner and outer sphere of the cluster

The reaction of the acetylene RC triple bond CH (R = Ph, CH(2)SiMe(3)) with an excess of AlH(3).NMe(3) in boiling toluene leads to the carbaalane [(AlH)(6)(AlNMe(3))(2)(CCH(2)R)(6)] (R = Ph 1, CH(2)SiMe(3) 2) in good yield. Treatment of 2 with BCl(3) under varying conditions gives the chlorinated products [(AlCl)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] 3 and [(AlCl)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(2)Cl)(6)] 4, respectively. The latter clearly demonstrates that the cluster can be stepwise functionalized within the inner and outer sphere. The X-ray single-crystal structures of 1, 2, and 4 have been determined. All compounds have in common that the central core consists of a cluster having eight aluminum and six carbon atoms. The bonding properties in this cluster are described as a new manifestation of three-dimensional surface aromaticity. Each Al(4)C fragment of the cube is formed by four bonds with three electron pairs, thus leading to a strong delocalization of the electrons. A phenomenological modeling using a three-dimensional Hückel scheme with fitted parameters to reproduce the energies from ab initio calculations revealed that the orbital scheme localized at one Al(4)C fragment possesses an orbital sextet with a large HOMO-LUMO gap. This is in line with the criteria of aromaticity. The idea of aromaticity was sustained also by qualitative valence bond reasons enumerating the different resonance structures by means of graph theoretical methods.     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.     

Carbodiphosphorane analogues E(PPh3)2 with E=C-Pb: a theoretical study with implications for ligand design

Quantum-chemical calculations at the BP86/TZVPP level have been carried out for the heavy Group 14 homologues of carbodiphosphorane E(PPh(3))(2), where E=Si, Ge, Sn, Pb, which are experimentally unknown so far. The results of the theoretical investigation suggest that the tetrelediphosphoranes E(PPh(3))(2) (1E) are stable compounds that could become isolated in a condensed phase. The molecules possess donor-acceptor bonds Ph(3)P→E←PPh(3) to a bare tetrele atom E, which retains its four valence electrons as two electron lone pairs. The analysis of the bonding situation and the calculation of the chemical reactivity indicate that the molecules 1E belong to the class of divalent E(0) compounds (ylidones). All molecules 1C-1Pb have very large first but also very large second proton affinities, which distinguishes them from the N-heterocyclic carbene homologues, in which the donor atom is a divalent E(II) species that possesses only one electron lone pair. Compounds 1E are powerful double donors that strongly bind Lewis acids such as BH(3) and AuCl in the complexes 1E(BH(3))(n) and 1E(AuCl)(n) (n=1, 2). The bond dissociation energies (BDEs) of the second BH(3) and AuCl molecules are only slightly less than the BDE of the first BH(3) and AuCl. The results of this work are a challenge for experimentalists.     

Synthesis, reactivity, and DFT studies of tantalum complexes incorporating diamido-N-heterocyclic carbene ligands. Facile endocyclic C-H bond activation

The syntheses of tantalum derivatives with the potentially tridentate diamido-N-heterocyclic carbene (NHC) ligand are described. Aminolysis and alkane elimination reactions with the diamine-NHC ligands, (Ar)[NCN]H(2) (where (Ar)[NCN]H(2) = (ArNHCH(2)CH(2))(2)(C(3)N(2)); Ar = Mes, p-Tol), provided complexes with a bidentate amide-amine donor configuration. Attempts to promote coordination of the remaining pendent amine donor were unsuccessful. Metathesis reactions with the dilithiated diamido-NHC ligand ((Ar)[NCN]Li(2)) and various Cl(x)Ta(NR'(2))(5-)(x) precursors were successful and generated the desired octahedral (Ar)[NCN]TaCl(x)(NR'(2))(3-)(x) complexes. Attempts to prepare trialkyl tantalum complexes by this methodology resulted in the formation of an unusual metallaaziridine derivative. DFT calculations on model complexes show that the strained metallaaziridine ring forms because it allows the remaining substituents to adopt preferable bonding positions. The calculations predict that the lowest energy pathway involves a tantalum alkylidene intermediate, which undergoes C-H bond activation alpha to the amido to form the metallaaziridine moiety. This mechanism was confirmed by examining the distribution of deuterium atoms in an experiment between (Mes)[NCN]Li(2) and Cl(2)Ta(CD(2)Ph)(3). The single-crystal X-ray structures of (p)(-Tol)[NCNH]Ta(NMe(2))(4) (3), (Mes)[NCNH]Ta=CHPh(CH(2)Ph)(2) (4), (p)(-Tol)[NCN]Ta(NMe(2))(3) (7), (Mes)[NCCN]Ta(CH(2)(t)Bu)(2) (11), and (Mes)[NCCN]TaCl(CH(2)(t)Bu) (14) are included.     

How amidoximate binds the uranyl cation

This study identifies how the amidoximate anion, AO, interacts with the uranyl cation, UO(2)(2+). Density functional theory calculations have been used to evaluate possible binding motifs in a series of [UO(2)(AO)(x)(OH(2))(y)](2-x) (x = 1-3) complexes. These motifs include monodentate binding to either the oxygen or the nitrogen atom of the oxime group, bidentate chelation involving the oxime oxygen atom and the amide nitrogen atom, and η(2) binding with the N-O bond. The theoretical results establish the η(2) motif to be the most stable form. This prediction is confirmed by single-crystal X-ray diffraction of UO(2)(2+) complexes with acetamidoxime and benzamidoxime anions.     

Intra- and intermolecular N-H...F-C hydrogen-bonding interactions in amine adducts of tris(pentafluorophenyl)borane and -alane

The reaction between B(C(6)F(5))(3) and NH(3)(g) in light petroleum yielded the solvated adduct H(3)N.B(C(6)F(5))(3).NH(3). Treatment with a second equivalent of B(C(6)F(5))(3) afforded H(3)N.B(C(6)F(5))(3). Attempts to prepare the analogous alane adduct were unsuccessful and resulted in protolysis. Related compounds of the form R'R' 'N(H).M(C(6)F(5))(3) were synthesized from M(C(6)F(5))(3) and the corresponding primary and secondary amines (M = B, Al; R' = H, Me, CH(2)Ph; R' ' = Me, CH(2)Ph, CH(Me)(Ph); R'R' ' = cyclo-C(5)H(10)). The solid-state structures of 13 new compounds have been elucidated by single-crystal X-ray diffraction and are discussed. Each of the borane adducts has a significant bifurcated intramolecular hydrogen bond between an amino hydrogen and two o-fluorines, while N-H...F-C interactions in the alane adducts are weaker and more variable. (19)F NMR studies demonstrate that the borane adducts retain the bifurcated C-F...H...F-C hydrogen bond in solution. Compounds of the type R'R' 'N(H).M(C(6)F(5))(3) conform to Etter's rules for the prediction of hydrogen-bonding interactions.     

Synthesis and structural characterization of an azatitanacyclobutene: the key intermediate in the catalytic anti-Markovnikov addition of primary amines to [small alpha]-alkynes

Reaction of the imidotitanium complexes [Ti(N(t)Bu)(N(2)N(py))(py)](1) and [Ti(N-2,6-C(6)H(3)(i)Pr(2))(N(2)N(py))(py)](2) with phenyl acetylene and tolyl acetylene in toluene gave the corresponding [2+2] cycloaddition products [Ti(N(2)N(py))[kappa(2)-N((t)Bu)CH[double bond]CR]](R = Ph:3, Tol:4) and [Ti(N(2)N(py))[kappa(2)-N(2,6-C(6)H(3)(i)Pr(2))CH[double bond]CR]](R = Ph:5, Tol: 6). Complex 6 is the first example of a key intermediate in the anti-Markovnikov addition of a primary amine to a terminal acetylene which has been structurally characterized by X-ray diffraction.     

What is the best bonding model of the (σ-H-BR) species bound to a transition metal? Bonding analysis in complexes [(H)2Cl(PMe3)2M(σ-H-BR)] (M = Fe, Ru, Os)

Density Functional Theory calculations have been performed for the σ-hydroboryl complexes of iron, ruthenium and osmium [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] (M = Fe, Ru, Os; R = OMe, NMe(2), Ph) at the BP86/TZ2P/ZORA level of theory in order to understand the interactions between metal and HBR ligands. The calculated geometries of the complexes [(H)(2)Cl(PMe(3))(2)Ru(HBNMe(2))], [(H)(2)Cl(PMe(3))(2)Os(HBR)] (R = OMe, NMe(2)) are in excellent agreement with structurally characterized complexes [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))], [(H)(2)Cl(P(i)Pr(3))(2)Os{σ-H-BOCH(2)CH(2)OB(O(2)CH(2)CH(2))}] and [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))]. The longer calculated M-B bond distance in complex [(H)(2)Cl(PMe(3))(2)M(σ-H-BNMe(2))] are due to greater B-N π bonding and as a result, a weaker M-B π-back-bonding. The B-H2 bond distances reveal that (i) iron complexes contain bis(σ-borane) ligand, (ii) ruthenium complexes contain (σ-H-BR) ligands with a stretched B-H2 bond, and (iii) osmium complexes contain hydride (H2) and (σ-H-BR) ligands. The H-BR ligands in osmium complexes are a better trans-directing ligand than the Cl ligand. Values of interaction energy, electrostatic interaction, orbital interaction, and bond dissociation energy for interactions between ionic fragments are very large and may not be consistent with M-(σ-H-BR) bonding. The EDA as well as NBO and AIM analysis suggest that the best bonding model for the M-σ-H-BR interactions in the complexes [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] is the interaction between neutral fragments [(H)(2)Cl(PMe(3))(2)M] and [σ-H-BR]. This becomes evident from the calculated values for the orbital interactions. The electron configuration of the fragments which is shown for C in Fig. 1 experiences the smallest change upon the M-σ-H-BR bond formation. Since model C also requires the least amount of electronic excitation and geometry changes of all models given by the ΔE(prep) values, it is clearly the most appropriate choice of interacting fragments. The π-bonding contribution is 14-22% of the total orbital contribution.     

Theoretical approaches to estimating homolytic bond dissociation energies of organocopper and organosilver compounds

Although organocopper and organosilver compounds are known to decompose by homolytic pathways among others, surprisingly little is known about their bond dissociation energies (BDEs). In order to address this deficiency, the performance of the DFT functionals BLYP, B3LYP, BP86, TPSSTPSS, BHandHLYP, M06L, M06, M06-2X, B97D, and PBEPBE, along with the double hybrids, mPW2-PLYP, B2-PLYP, and the ab initio methods, MP2 and CCSD(T), have been benchmarked against the thermochemistry for the M-C homolytic BDEs (D(0)) of Cu-CH(3) and Ag-CH(3), derived from guided ion beam experiments and CBS limit calculations (D(0)(Cu-CH(3)) = 223 kJ·mol(-1); D(0)(Ag-CH(3)) = 169 kJ·mol(-1)). Of the tested methods, in terms of chemical accuracy, error margin, and computational expense, M06 and BLYP were found to perform best for homolytic dissociation of methylcopper and methylsilver, compared with the CBS limit gold standard. Thus the M06 functional was used to evaluate the M-C homolytic bond dissociation energies of Cu-R and Ag-R, R = Et, Pr, iPr, tBu, allyl, CH(2)Ph, and Ph. It was found that D(0)(Ag-R) was always lower (～50 kJ·mol(-1)) than that of D(0)(Cu-R). The trends in BDE when changing the R ligand reflected the H-R bond energy trends for the alkyl ligands, while for R = allyl, CH(2)Ph, and Ph, some differences in bond energy trends arose. These trends in homolytic bond dissociation energy help rationalize the previously reported (Rijs, N. J.; O'Hair, R. A. J. Organometallics2010, 29, 2282-2291) fragmentation pathways of the organometallate anions, [CH(3)MR](-).     

Mechanism of the Stille reaction catalyzed by palladium ligated to arsine ligand: PhPdI(AsPh3)(DMF) is the species reacting with vinylstannane in DMF

The kinetics of the reaction of PhPdI(AsPh(3))(2) (formed via the fast oxidative addition of PhI with Pd(0)(AsPh(3))(2)) with a vinyl stannane CH(2)[double bond]CH[bond]Sn(n-Bu)(3) has been investigated in DMF. This reaction (usually called transmetalation step) is the prototype of the rate determining second step of the catalytic cycle of Stille reactions. It is established here that the transmetalation proceeds through PhPdI(AsPh(3))(DMF), generated by the dissociation of one ligand AsPh(3) from PhPdI(AsPh(3))(2). PhPdI(AsPh(3))(DMF) is the reactive species, which leads to styrene through its reaction with CH(2)[double bond]CH[bond]SnBu(3). Consequently, in DMF, the overall nucleophilic attack mainly proceeds via a mechanism involving PhPdI(AsPh(3))(DMF) as the central reactive complex and not PhPdI(AsPh(3))(2). The dimer [Ph(2)Pd(2)(mu(2)-I)(2)(AsPh(3))(2)] has been independently synthesized and characterized by its X-ray structure. In DMF, this dimer dissociates quantitatively into PhPdI(AsPh(3))(DMF), which reacts with CH(2)[double bond]CH[bond]SnBu(3). The rate constant for the reaction of PhPdI(AsPh(3))(DMF) with CH(2)[double bond]CH[bond]SnBu(3) has been determined in DMF for each situation and was found to be comparable.     

Electrochemical and spectroscopic characterization of a series of mixed-ligand diruthenium compounds

The electrochemistry and spectroelectrochemistry of a novel series of mixed-ligand diruthenium compounds were examined. The investigated compounds having the formula Ru(2)(CH(3)CO(2))(x)(Fap)(4-x)Cl where x = 1-3 and Fap is 2-(2-fluoroanilino)pyridinate anion were made from the reaction of Ru(2)(CH(3)CO(2))(4)Cl with 2-(2-fluoroanilino)pyridine (HFap) in refluxing methanol. The previously characterized Ru(2)(Fap)(4)Cl as well as the three newly isolated compounds represented as Ru(2)(CH(3)CO(2))(Fap)(3)Cl (1), Ru(2)(CH(3)CO(2))(2)(Fap)(2)Cl (2), and Ru(2)(CH(3)CO(2))(3)(Fap)Cl (3) possess three unpaired electrons with a Ru(2)(5+) dimetal core. Complexes 1 and 2 have well-defined Ru(2)(5+/4+) and Ru(2)(5+/6+) redox couples in CH(2)Cl(2), but 3 exhibits a more complicated electrochemical behavior due to equilibria involving association or dissociation of the anionic chloride axial ligand on the initial and oxidized or reduced forms of the compound. The E(1/2) values for the Ru(2)(5+/4+) and Ru(2)(5+/6+) processes vary linearly with the number of CH(3)CO(2)(-) bridging ligands on Ru(2)(CH(3)CO(2))(x)(Fap)(4-x)Cl and plots of reversible half-wave potentials vs the number of acetate groups follow linear free energy relationships with the largest substituent effect being observed for the oxidation. The major UV-visible band of the examined compounds in their neutral Ru(2)(5+) form is located between 550 and 800 nm in CH(2)Cl(2) and also varies linearly with the number of CH(3)CO(2)(-) ligands on Ru(2)(CH(3)CO(2))(x)(Fap)(4-x)Cl. The electronic spectra of the singly oxidized and singly reduced forms of each diruthenium species were characterized by UV-visible spectroelectrochemistry in CH(2)Cl(2).     

Studies of a series of [Ni(P(R)2N(Ph)2)2(CH3CN)]2+ complexes as electrocatalysts for H2 production: substituent variation at the phosphorus atom of the P2N2 ligand

A series of [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes containing the cyclic diphosphine ligands [P(R)(2)N(Ph)(2) = 1,5-diaza-3,7-diphosphacyclooctane; R = benzyl (Bn), n-butyl (n-Bu), 2-phenylethyl (PE), 2,4,4-trimethylpentyl (TP), and cyclohexyl (Cy)] have been synthesized and characterized. X-ray diffraction studies reveal that the cations of [Ni(P(Bn)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) and [Ni(P(n-Bu)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) have distorted trigonal bipyramidal geometries. The Ni(0) complex [Ni(P(Bn)(2)N(Ph)(2))(2)] was also synthesized and characterized by X-ray diffraction studies and shown to have a distorted tetrahedral structure. These complexes, with the exception of [Ni(P(Cy)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2), all exhibit reversible electron transfer processes for both the Ni(II/I) and Ni(I/0) couples and are electrocatalysts for the production of H(2) in acidic acetonitrile solutions. The heterolytic cleavage of H(2) by [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes in the presence of p-anisidine or p-bromoaniline was used to determine the hydride donor abilities of the corresponding [HNi(P(R)(2)N(Ph)(2))(2)](BF(4)) complexes. However, for the catalysts with the most bulky R groups, the turnover frequencies do not parallel the driving force for elimination of H(2), suggesting that steric interactions between the alkyl substituents on phosphorus and the nitrogen atom of the pendant amines play an important role in determining the overall catalytic rate.     

Thermolyses of O-phenyl oxime ethers. A new source of iminyl radicals and a new source of aryloxyl radicals

Six O-phenyl ketoxime ethers, RR'C=NOPh 1-6, with RR' = diaryl, dialkyl, and arylalkyl, together with N-phenoxybenzimidic acid phenyl ether, PhO(Ph)C=NOPh, 7, have been shown to thermolyze at moderate temperatures with "clean" N-O bond homolyses to yield iminyl and phenoxyl radicals, RR'C=N(*) and PhO(*). Since 1-6 can be synthesized at room temperature, these compounds provide a new and potentially useful source of iminyls for syntheses. The iminyl from 7 undergoes a competition between beta-scission, to PhCN and PhO(*), and cyclization to an oxazole. Rate constants, 10(6) k/s(-1), at 90 degrees C for 1-6 range from 4.2 (RR' = 9-fluorenyl) to 180 (RR' = 9-bicyclononanyl), and that for 7 is 0.61. The estimated activation enthalpies for N-O bond scission are in satisfactory agreement with the results of DFT calculations of N-O bond dissociation enthalpies, BDEs, and represent the first thermochemical data for any reaction yielding iminyl radicals. The small range in k (N-O homolyses) is consistent with the known sigma structure of these radicals, and the variations in k and N-O BDEs with changes in RR' are rationalized in terms of iminyl radical stabilization by hyperconjugation: RR'C=N(*) <--> R(*)R'C[triple bond]N. Calculated N-H BDEs in the corresponding RR'C=NH are also presented.     

The nature of unsupported uranium-ruthenium bonds: a combined experimental and theoretical study

Four new uranium-ruthenium complexes, [(Tren(TMS))URu(η(5)-C(5)H(5))(CO)(2)] (9), [(Tren(DMSB))URu(η(5)-C(5)H(5))(CO)(2)] (10), [(Ts(Tolyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (11), and [(Ts(Xylyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (12) [Tren(TMS)=N(CH(2)CH(2)NSiMe(3))(3); Tren(DMSB)=N(CH(2)CH(2)NSiMe(2)tBu)(3)]; Ts(Tolyl)=HC(SiMe(2)NC(6)H(4)-4-Me)(3); Ts(Xylyl)=HC(SiMe(2)NC(6)H(3)-3,5-Me(2))(3)], were prepared by a salt-elimination strategy. Structural, spectroscopic, and computational analyses of 9-12 shows: i) the formation of unsupported uranium-ruthenium bonds with no isocarbonyl linkages in the solid state; ii) ruthenium-carbonyl backbonding in the [Ru(η(5)-C(5)H(5))(CO)(2)](-) ions that is tempered by polarization of charge within the ruthenium fragments towards uranium; iii) closed-shell uranium-ruthenium interactions that can be classified as predominantly ionic with little covalent character. Comparison of the calculated U-Ru bond interaction energies (BIEs) of 9-12 with the BIE of [(η(5)-C(5)H(5))(3)URu(η(5)-C(5)H(5))(CO)(2)], for which an experimentally determined U-Ru bond disruption enthalpy (BDE) has been reported, suggests BDEs of approximately 150 kJ mol(-1) for 9-12.     

Multiple silicon-hydrogen bond activations at adjacent rhodium and iridium centers

The reaction of 1 equiv of primary silanes, SiH(3)R (R = Ph, Mes), with [RhIr(CO)(3)(dppm)(2)] yields mono(silylene)-bridged complexes of the type [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (R = Ph or Mes), while for R = Ph the addition of 2 equiv yields the bis(silylene)-bridged complexes, [RhIr(CO)(2)(μ-SiHPh)(2)(dppm)(2)]. The kinetic isomer of this bis(silylene)-bridged product has the phenyl substituent axial on one silylene unit and equatorial on the other, and in the presence of excess silane this rearranges to the thermodynamically preferred "axial-axial" isomer, in which the phenyl substituents on each bridging silylene unit are axial and parallel to one another. The reaction of 1 equiv of diphenylsilane with [RhIr(CO)(3)(dppm)(2)] produces the mono(silylene)-bridged product, [RhIr(H)(2)(CO)(2)(μ-SiPh(2))(dppm)(2)], and the subsequent addition of silane in the presence of CO yields the silyl/silylene product [RhIr(H)(SiPh(2)H)(CO)(3)(κ(1)-dppm)(μ-SiPh(2))(dppm)]. The reaction of [RhIr(CO)(3)(dppm)(2)] with 2 equiv of SiH(2)Me(2) yields the analogous product [RhIr(H)(SiMe(2)H)(CO)(3)(κ(1)-dppm)(μ-SiMe(2))(dppm)]. Low-temperature NMR spectroscopic observation of some key intermediates, such as [RhIr(H)(SiH(2)Ph)(CO)(2)(μ-CO)(dppm)(2)], formed during the formation of the mono(silylene)-bridged species provides evidence for a mechanism involving initial Si-H bond activation at Rh, followed by the subsequent Si-H bond activation at Ir. The Si-H bond activation of a second equivalent of silane seems to be initiated by dissociation of the Rh-bound end of one diphosphine. The reaction of diphenylsilane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] gives rise to a different reactivity pattern in which Si-H bond activation is initiated at Ir. In this case, the cationic silyl-bridged species, [RhIr(CH(3))(CO)(2)(κ(1):η(2)-SiHPh(2))(dppm)(2)][CF(3)SO(3)], contains an agostic Si-H interaction with Rh. In solution, at ambient temperature, this complex converts to two species, [RhIr(H)(COCH(3))(CO)(μ-H)(μ-SiPh(2))(dppm)(2)][CF(3)SO(3)] and [RhIr(CO)(2)(μ-H)(μ-SiPh(2))(dppm)(2)] [CF(3)SO(3)], formed by the competing methyl migration to CO and reductive elimination of methane, respectively. In the diphenylsilylene dihydride product, a weak interaction between the bridging silicon and the terminal Ir-bound hydride is proposed on the basis of NMR evidence.     

Zwitterionic and cationic bis(phosphine) platinum(II) complexes: structural,electronic, and mechanistic comparisons relevant to ligand exchange and benzene C-H activation processes

Structurally similar but charge-differentiated platinum complexes have been prepared using the bidentate phosphine ligands [Ph(2)B(CH(2)PPh(2))(2)], ([Ph(2)BP(2)], [1]), Ph(2)Si(CH(2)PPh(2))(2), (Ph(2)SiP(2), 2), and H(2)C(CH(2)PPh(2))(2), (dppp, 3). The relative electronic impact of each ligand with respect to a coordinated metal center's electron-richness has been examined using comparative molybdenum and platinum model carbonyl and alkyl complexes. Complexes supported by anionic [1] are shown to be more electron-rich than those supported by 2 and 3. A study of the temperature and THF dependence of the rate of THF self-exchange between neutral, formally zwitterionic [Ph(2)BP(2)]Pt(Me)(THF) (13) and its cationic relative [(Ph(2)SiP(2))Pt(Me)(THF)][B(C(6)F(5))(4)] (14) demonstrates that different exchange mechanisms are operative for the two systems. Whereas cationic 14 displays THF-dependent, associative THF exchange in benzene, the mechanism of THF exchange for neutral 13 appears to be a THF independent, ligand-assisted process involving an anchimeric, eta(3)-binding mode of the [Ph(2)BP(2)] ligand. The methyl solvento species 13, 14, and [(dppp)Pt(Me)(THF)][B(C(6)F(5))(4)] (15), each undergo a C-H bond activation reaction with benzene that generates their corresponding phenyl solvento complexes [Ph(2)BP(2)]Pt(Ph)(THF) (16), [(Ph(2)SiP(2))Pt(Ph)(THF)][B(C(6)F(5))(4)] (17), and [(dppp)Pt(Ph)(THF)][B(C(6)F(5))(4)] (18). Examination of the kinetics of each C-H bond activation process shows that neutral 13 reacts faster than both of the cations 14 and 15. The magnitude of the primary kinetic isotope effect measured for the neutral versus the cationic systems also differs markedly (k(C(6)H(6))/k(C(6)D(6)): 13 = 1.26; 14 = 6.52; 15 approximately 6). THF inhibits the rate of the thermolysis reaction in all three cases. Extended thermolysis of 17 and 18 results in an aryl coupling process that produces the dicationic, biphenyl-bridged platinum dimers [[(Ph(2)SiP(2))Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (19) and [[(dppp)Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (20). Extended thermolysis of neutral [Ph(2)BP(2)]Pt(Ph)(THF) (16) results primarily in a disproportionation into the complex molecular salt [[Ph(2)BP(2)]PtPh(2)](-)[[Ph(2)BP(2)]Pt(THF)(2)](+). The bulky phosphine adducts [Ph(2)BP(2)]Pt(Me)[P(C(6)F(5))(3)] (25) and [(Ph(2)SiP(2))Pt(Me)[P(C(6)F(5))(3)]][B(C(6)F(5))(4)] (29) also undergo thermolysis in benzene to produce their respective phenyl complexes, but at a much slower rate than for 13-15. Inspection of the methane byproducts from thermolysis of 13, 14, 15, 25, and 29 in benzene-d(6) shows only CH(4) and CH(3)D. Whereas CH(3)D is the dominant byproduct for 14, 15, 25, and 29, CH(4) is the dominant byproduct for 13. Solution NMR data obtained for 13, its (13)C-labeled derivative [Ph(2)BP(2)]Pt((13)CH(3))(THF) (13-(13)()CH(3)()), and its deuterium-labeled derivative [Ph(2)B(CH(2)P(C(6)D(5))(2))(2)]Pt(Me)(THF) (13-d(20)()), establish that reversible [Ph(2)BP(2)]-metalation processes are operative in benzene solution. Comparison of the rate of first-order decay of 13 versus the decay of d(20)-labeled 13-d(20)() in benzene-d(6) affords k(13)()/k(13-d20)() approximately 3. The NMR data obtained for 13, 13-(13)()CH(3)(), and 13-d(20)() suggest that ligand metalation processes involve both the diphenylborate and the arylphosphine positions of the [Ph(2)BP(2)] auxiliary. The former type leads to a moderately stable and spectroscopically detectable platinum(IV) intermediate. All of these data provide a mechanistic outline of the benzene solution chemistries for the zwitterionic and the cationic systems that highlights their key similarities and differences.     

Theory of late-transition-metal alkyl and heteroatom bonding: analysis of Pt, Ru, Ir, and Rh complexes

Density functional and correlated ab initio methods were used to calculate, compare, and analyze bonding interactions in late-transition-metal alkyl and heteroatom complexes (M-X). The complexes studied include: (DMPE)Pt(CH(3))(X) (DMPE = 1,2-bis(dimethylphosphino)ethane), Cp*Ru(PMe(3))(2)(X) (Cp* = pentamethylcyclopentadienyl), (DMPE)(2)Ru(H)(X), (Tp)(CO)Ru(Py)(X) (Tp = trispyrazolylborate), (PMe(3))(2)Rh(C(2)H(4))(X), and cis-(acac)(2)Ir(Py)(X) (acac = acetylacetonate). Seventeen X ligands were analyzed that include alkyl (CR(3)), amido (NR(2)), alkoxo (OR), and fluoride. Energy decomposition analysis of these M-X bonds revealed that orbital charge transfer stabilization provides a straightforward model for trends in bonding along the alkyl to heteroatom ligand series (X = CH(3), NH(2), OH, F). Pauli repulsion (exchange repulsion), which includes contributions from closed-shell d(π)-p(π) repulsion, generally decreases along the alkyl to heteroatom ligand series but depends on the exact M-X complexes. It was also revealed that stabilizing electrostatic interactions generally decrease along this ligand series. Correlation between M-X and H-X bond dissociation energies is good with R(2) values between 0.7 and 0.9. This correlation exists because for both M-X and H-X bonds the orbital stabilization energies are a function of the orbital electronegativity of the X group. The greater than 1 slope when correlating M-X and H-X bond dissociation energies was traced back to differences in Pauli repulsion and electrostatic stabilization.     

The synthesis, structure and dynamic behaviour of disubstituted alkenylphosphine derivatives of [Rh6(CO)16

A series of [Rh(6)(CO)(16)] substituted derivatives containing Ph(2)P(alkenyl) ligands has been synthesized starting from the [Rh(6)(CO)(16-x)(NCMe)(x)](x= 1, 2) clusters and Ph(2)P((CH(2))(n)CH=CH(2))(n= 2, 3) phosphines. It was shown that the terminal alkenyl substituents in these phosphines easily undergo isomerization in the coordination sphere of the hexarhodium complexes to give the allyl -CH(2)CH=C(H)R (R = Me and Et) fragments coordinated through the double bond of the rearranged organic moieties. The solid-state structure of two clusters, [Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH(2)CH=C(H)CH(3))](4) and [Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH(2)CH=C(H)CH(2)CH(3))](8), was established by X-ray crystallography. Solution structures of the products obtained were also characterized by IR and NMR ((1)H, (31)P, (1)H-(1)H COSY and (1)H-(1)H NOE) spectroscopy. It was shown that 4 and 8 exist in solution as mixtures of three isomers (A, B and C), which differ in the conformation of the coordinated allyl fragment. A similar (two species, A and B) equilibrium was found to occur in the solution of the [Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH(2)CH=CH(2))](2) cluster. The dynamic behaviour of 2, 4 and 8[Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH=CH(2))] has been studied using VT (31)P and (1)H-(1)H NOESY NMR spectroscopy, rate constants and activation parameters of the (A<-->B) isomerization processes were determined. It was shown that the most probable mechanism of this isomerization involves a dissociative [Rh6(CO)(14)(kappa1-Ph(2)P(alkenyl))] intermediate and re-coordination of the double bond to the same metal atom where the process started from. The conversion of the A and B species in and into the third isomer very likely occurs through the transfer of an allyl hydrogen atom onto the rhodium skeleton to give eventually cis conformation of the coordinated allyl fragment.     

Supramolecular gold(I) thiobarbiturate chemistry: combining aurophilicity and hydrogen bonding to make polymers,sheets, and networks

The cooperative forces of aurophilic and hydrogen bonding have been used in the self-assembly of phosphine or diphosphine complexes of gold(I) with the thiolate ligands derived from 2-thiobarbituric acid, SC(4)H(4)N(2)O(2), by single or double deprotonation. The reaction of the corresponding gold(I) trifluoroacetate complex with SC(4)H(4)N(2)O(2) gave the complexes [Au(SC(4)H(3)N(2)O(2))(PPh(3))], 1, [(AuSC(4)H(3)N(2)O(2))(2)(micro-LL)], with LL = Ph(2)PCH(2)PPh(2), 2a, Ph(2)P(CH(2))(3)PPh(2), 2b, or Ph(2)PCH=CHPPh(2), 2c, or the cyclic complex [Au(2)(micro-SC(4)H(2)N(2)O(2))(micro-Ph(2)PCH(2)CH(2)PPh(2))], 3. In the case with LL = Ph(2)P(CH(2))(6)PPh(2), the reaction led to loss of the diphosphine ligand to give [Au(6)(SC(4)H(3)N(2)O(2))(6)], 4, a hexagold(I) cluster complex in which each gold(I) center has trigonal AuS(2)N coordination. Structure determinations show that 1 has no aurophilic bonding, 2b, 3, and 4 have intramolecular aurophilic bonding, and 2c has intermolecular aurophilic bonding that contributes to the supramolecular structure. All the complexes undergo supramolecular association through strong NH...O and/or OH...N hydrogen bonding, and complex 3 also takes part in CH...O hydrogen bonding. The supramolecular association leads to formation of interesting polymer, sheet, or network structures, and 4 has a highly porous and stable lattice structure.