Stereospecific alkane hydroxylation by non-heme iron catalysts: mechanistic evidence for an Fe(V)=O active species.

High-valent iron-oxo species have frequently been invoked in the oxidation of hydrocarbons by both heme and non-heme enzymes. Although a formally Fe(V)=O species, that is, [(Por(*))Fe(IV)=O](+), has been widely accepted as the key oxidant in stereospecific alkane hydroxylation by heme systems, it is not established that such a high-valent state can be accessed by a non-heme ligand environment. Herein we report a systematic study on alkane oxidations with H(2)O(2) catalyzed by a group of non-heme iron complexes, that is, [Fe(II)(TPA)(CH(3)CN)(2)](2+) (1, TPA = tris(2-pyridylmethyl)amine) and its alpha- and beta-substituted analogues. The reactivity patterns of this family of Fe(II)(TPA) catalysts can be modulated by the electronic and steric properties of the ligand environment, which affects the spin states of a common Fe(III)-OOH intermediate. Such an Fe(III)-peroxo species is high-spin when the TPA ligand has two or three alpha-substituents and is proposed to be directly responsible for the selective C-H bond cleavage of the alkane substrate. The thus-generated alkyl radicals, however, have relatively long lifetimes and are susceptible to radical epimerization and trapping by O(2). On the other hand, 1 and the beta-substituted Fe(II)(TPA) complexes catalyze stereospecific alkane hydroxylation by a mechanism involving both a low-spin Fe(III)-OOH intermediate and an Fe(V)=O species derived from O-O bond heterolysis. We propose that the heterolysis pathway is promoted by two factors: (a) the low-spin iron(III) center which weakens the O-O bond and (b) the binding of an adjacent water ligand that can hydrogen bond to the terminal oxygen of the hydroperoxo group and facilitate the departure of the hydroxide. Evidence for the Fe(V)=O species comes from isotope-labeling studies showing incorporation of (18)O from H(2)(18)O into the alcohol products. (18)O-incorporation occurs by H(2)(18)O binding to the low-spin Fe(III)-OOH intermediate, its conversion to a cis-H(18)O-Fe(V)=O species, and then oxo-hydroxo tautomerization. The relative contributions of the two pathways of this dual-oxidant mechanism are affected by both the electron donating ability of the TPA ligand and the strength of the C-H bond to be broken. These studies thus serve as a synthetic precedent for an Fe(V)=O species in the oxygen activation mechanisms postulated for non-heme iron enzymes such as methane monooxygenase and Rieske dioxygenases.     

The reaction of [FeII(tpa)] with H2O2 in acetonitrile and acetone--distinct intermediates and yet similar catalysis

The reaction of [FeII(tpa)(OTf)2] (tpa=tris(2-pyridylmethyl)amine) and its related 5-Me3-tpa complex with hydrogen peroxide affords spectroscopically distinct iron(III)-peroxo intermediates in CH3CN and acetone. The reaction in acetonitrile at -40 degrees C results in the formation of the previously reported Fe(III)-OOH intermediate, the end-on hydroperoxo coordination mode of which is established in this paper by detailed resonance Raman isotope-labeling experiments. On the other hand, the reaction in acetone below -40 degrees C leads to the observation of a different peroxo intermediate identified by resonance Raman spectroscopy to be an FeIII-OOC (CH3)2OH species; this represents the first example of an intermediate derived from the adduct of H2O2 and acetone. The peroxoacetone intermediate decays more rapidly than the corresponding FeIII-OOH species and converts to an FeIV=O species by O-O bond homolysis. This decay process is analogous to that observed for [FeIII(tpa)(OOtBu)]2+ and in fact exhibits a comparable enthalpy of activation of 54(3) kJ mol(-1). Thus, with respect to their physical properties at low temperature, the peroxoacetone intermediate resembles [FeIII(tpa)(OOtBu)]2+ more than the corresponding FeIII-OOH species. At room temperature, however, the behavior of the Fe(tpa)/H2O2 combination in acetone in catalytic hydrocarbon oxidations differs significantly from that of the Fe(tpa)/tBuOOH combination and more closely matches that of the Fe(tpa)/H2O2 combination in CH3CN. Like the latter, the Fe(tpa)/H2O2 combination in acetone catalyzes the hydroxylation of cis-1,2-dimethylcyclohexane to its tertiary alcohol with high stereoselectivity and carries out the epoxidation and cis-dihydroxylation of olefins. These results demonstrate the subtle complexity of the Fe(tpa)/H2O2 reaction surface.     

Direct hydrogen-atom abstraction by activated bleomycin: an experimental and computational study

Bleomycin (BLM), a glycopeptide antibiotic chemotherapy agent, is capable of single- and double-strand DNA damage. Activated bleomycin (ABLM), a low-spin Fe(III)-OOH complex, is the last intermediate detected prior to DNA cleavage following hydrogen-atom abstraction from the C-4' of a deoxyribose sugar moiety. The mechanism of this C-H bond cleavage reaction and the nature of the active oxidizing species are still open issues. We have used kinetic measurements in combination with density functional calculations to study the reactivity of ABLM and the mechanism of the initial attack on DNA. Circular dichroism spectroscopy was used to directly monitor the kinetics of the ABLM reaction. These experiments yield a deuterium isotope effect, kH/kD approximately 3 for ABLM decay, indicating the involvement of a hydrogen atom in the rate-determining step. H-atom donors with relatively weak X-H bonds accelerate the reaction rate, establishing that ABLM is capable of hydrogen-atom abstraction. Density functional calculations were used to evaluate the two-dimensional potential energy surface for the direct hydrogen-atom abstraction reaction of the deoxyribose 4'-H by ABLM. The calculations confirm that ABLM is thermodynamically and kinetically competent for H-atom abstraction. The activation and reaction energies for this pathway are favored over both homolytic and heterolytic O-O bond cleavage. Direct H-atom abstraction by ABLM would generate a reactive Fe(IV)=O species, which would be capable of a second DNA strand cleavage, as observed in vivo. This study provides experimental and theoretical evidence for direct H-atom abstraction by ABLM and proposes an attractive mechanism for the role of ABLM in double-strand cleavage.     

Mechanism of benzene hydroxylation by high-valent bare Fe(IV)=O2+: explicit electronic structure analysis

The conversion of benzene to phenol by high-valent bare FeO(2+) was comprehensively explored using a density functional theory method. The conductor-like screen model (COSMO) was used to mimic the role of solvent effect with acetonitrile chosen as the solvent. Two radical mechanisms and one oxygen insertion mechanism were tested for this conversion. The first radical mechanism can also be named as the concerted mechanism in which the hydrogen-atom abstraction process is accomplished via a four-centered transition state. The second radical mechanism is initiated by a direct hydrogen-atom abstraction with a collinear C-H-O transition structure. It is actually the same as the well-accepted rebound mechanism for the C-H bond activation by heme and nonheme iron-oxo catalysts. The third is an oxygen insertion mechanism which is essentially an aromatic electrophilic attack leading to an arenium σ-complex intermediate. The formation of a precomplex with an η(4) coordinate environment in the first radical mechanism is energetically more favorable. However, the relatively lower activation energy barrier of the oxygen insertion mechanism compared to the radical ones makes it highly competitive if the Fe=O(2+) collides with benzene in the proper orientation. The detailed potential energy surfaces also indicate that the second radical mechanism, i.e., the benzene C-H bond activation through the rebound mechanism, is less favorable. This thorough theoretical study, especially the electronic structure analysis, may offer very important clues for understanding and studying C-H bond activation by iron-based catalysts and enzymatic reactions in protein active pockets.     

Reactivity of copper(II)-alkylperoxo complexes

Copper(II) complexes 1a and 1b, supported by tridentate ligand bpa [bis(2-pyridylmethyl)amine] and tetradentate ligand tpa [tris(2-pyridylmethyl)amine], respectively, react with cumene hydroperoxide (CmOOH) in the presence of triethylamine in CH(3)CN to provide the corresponding copper(II) cumylperoxo complexes 2a and 2b, the formation of which has been confirmed by resonance Raman and ESI-MS analyses using (18)O-labeled CmOOH. UV-vis and ESR spectra as well as DFT calculations indicate that 2a has a 5-coordinate square-pyramidal structure involving CmOO(-) at an equatorial position and one solvent molecule at an axial position at low temperature (-90 °C), whereas a 4-coordinate square-planar structure that has lost the axial solvent ligand is predominant at higher temperatures (above 0 °C). Complex 2b, on the other hand, has a typical trigonal bipyramidal structure with the tripodal tetradentate tpa ligand, where the cumylperoxo ligand occupies an axial position. Both cumylperoxo copper(II) complexes 2a and 2b are fairly stable at ambient temperature, but decompose at a higher temperature (60 °C) in CH(3)CN. Detailed product analyses and DFT studies indicate that the self-decomposition involves O-O bond homolytic cleavage of the peroxo moiety; concomitant hydrogen-atom abstraction from the solvent is partially involved. In the presence of 1,4-cyclohexadiene (CHD), the cumylperoxo complexes react smoothly at 30 °C to give benzene as one product. Detailed product analyses and DFT studies indicate that reaction with CHD involves concerted O-O bond homolytic cleavage and hydrogen-atom abstraction from the substrate, with the oxygen atom directly bonded to the copper(II) ion (proximal oxygen) involved in the C-H bond activation step.     

Catalytic activity tuning of a biomimetic HO-FeV=O oxidant for methane hydroxylation by substituents on aromatic rings: theoretical study

HO-(TPA)FeV=O (TPA = tris(2-pyridylmethyl)amine) has been proposed in the literature as the key high-valent iron-oxo intermediate involved in alkane hydroxylation. Here the structure of this species is investigated theoretically in the framework of density functional theory (DFT). A detailed electronic structure analysis leads to the presumption that the properties of the FeV=O bond can be modified by introducing substituents to the aromatic rings of TPA and thus the reactivity of HO-(TPA)FeV=O for the hydrogen atom abstraction of methane hydroxylation can be tuned on the quartet potential energy surface. The validity of our presumption is verified by DFT calculations. According to the rebound mechanism, the H-abstraction step is examined by using five complexes with TPA and TPA-derivative ligands and the corresponding reaction energies and energy barriers are obtained and compared with each other. The results are fully in agreement with our qualitative model, showing that electron-withdrawing groups are able to lower the barrier and facilitate the reaction, whereas the electron-donating groups increase the barrier and reduce the reactivity.     

High-valent diiron species generated from N-bridged diiron phthalocyanine and H(2)O(2)

N-bridged diiron tetra-tert-butylphthalocyanine activates H(2)O(2) to form anionic hydroperoxo complex [(Pc)Fe(IV)=N-Fe(III)(Pc)-OOH](-) prone to heterolytic cleavage of O-O bond with the release of OH(-) and formation of neutral diiron oxo phthalocyanine cation radical complex, PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. ESI-MS data showed stability of the Fe-N-Fe binuclear structure upon formation of this species, capable of oxidizing methane and benzene via O-atom transfer. The slow formation kinetics and the high reactivity preclude direct detection of this oxo complex by low temperature UV-vis spectroscopy. However, strong oxidizing properties and the results of EPR study support the formation of PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. Addition of H(2)O(2) at -80 °C led to the disappearance of iron EPR signal and to the appearance of the narrow signal at g = 2.001 consistent with the transient formation of PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. In the course of this study, another high valent diiron species was prepared in the solid state with 70% yield. The M?ssbauer spectrum shows two quadrupole doublets with δ(1) = -0.14 mm s(-1), ΔE(Q1) = 1.57 mm s(-1) and δ(2) = -0.10 mm s(-1), ΔE(Q2) = 2.03 mm s(-1), respectively. The negative δ values are consistent with formation of Fe(iv) states. Fe K-edge EXAFS spectroscopy reveals conservation of the diiron Fe-N-Fe core. In XANES, an intense 1s → 3d pre-edge feature at 7114.4 eV suggests formation of Fe(iv) species and attaching of one oxygen atom per two Fe atoms at the 1.90 ? distance. On the basis of M?ssbauer, EPR, EXAFS and XANES data this species was tentatively assigned as (Pc)Fe(IV)=N-Fe(IV)(Pc)-OH which could be formed from PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O by hydrogen atom abstraction from a solvent molecule. Thus, despite unfavourable kinetics, we succeeded in the preparation of the first dirion(iv) phthalocyanine complex with oxygen ligand, generated in the (Pc)Fe(IV)=N-Fe(III)(Pc) - H(2)O(2) system capable of oxidizing methane.     

Mechanism of dioxygen cleavage in tetrahydrobiopterin-dependent amino acid hydroxylases

The reaction mechanism for the formation of the hydroxylating intermediate in aromatic amino acid hydroxylases (i.e., phenylalanine hydroxylase, tyrosine hydroxylase, tryptophan hydroxylase) was investigated by means of hybrid density functional theory. These enzymes use molecular oxygen to hydroxylate both the tetrahydrobiopterin cofactor and the aromatic amino acid. A mechanism is proposed in which dioxygen forms a bridging bond between the cofactor and iron. The product is an iron(II)-peroxy-pterin intermediate, and iron was found to be essential for the catalysis of this step. No stable intermediates involving a pterin radical cation and a superoxide ion O(2)(-) were found on the reaction pathway. Heterolysis of the O-O bond in the iron(II)-peroxy-pterin intermediate is promoted by one of the water molecules coordinated to iron and releases hydroxypterin and the high-valent iron oxo species Fe(IV)=O, which can carry out subsequent hydroxylation of aromatic rings. In the proposed mechanism, the formation of the bridging C-O bond is rate-limiting in the formation of Fe(IV)=O.     

Synthesis, characterization, and reactivities of manganese(V)-oxo porphyrin complexes

The reactions of manganese(III) porphyrin complexes with terminal oxidants, such as m-chloroperbenzoic acid, iodosylarenes, and H(2)O(2), produced high-valent manganese(V)-oxo porphyrins in the presence of base in organic solvents at room temperature. The manganese(V)-oxo porphyrins have been characterized with various spectroscopic techniques, including UV-vis, EPR, 1H and 19F NMR, resonance Raman, and X-ray absorption spectroscopy. The combined spectroscopic results indicate that the manganese(V)-oxo porphyrins are diamagnetic low-spin (S = 0) species with a longer, weaker Mn-O bond than in previously reported Mn(V)-oxo complexes of non-porphyrin ligands. This is indicative of double-bond character between the manganese(V) ion and the oxygen atom and may be attributed to the presence of a trans axial ligand. The [(Porp)Mn(V)=O](+) species are stable in the presence of base at room temperature. The stability of the intermediates is dependent on base concentration. In the absence of base, (Porp)Mn(IV)=O is generated instead of the [(Porp)Mn(V)=O](+) species. The stability of the [(Porp)Mn(V)=O](+) species also depends on the electronic nature of the porphyrin ligands: [(Porp)Mn(V)=O](+) complexes bearing electron-deficient porphyrin ligands are more stable than those bearing electron-rich porphyrins. Reactivity studies of manganese(V)-oxo porphyrins revealed that the intermediates are capable of oxygenating PPh(3) and thioanisoles, but not olefins and alkanes at room temperature. These results indicate that the oxidizing power of [(Porp)Mn(V)=O](+) is low in the presence of base. However, when the [(Porp)Mn(V)=O](+) complexes were associated with iodosylbenzene in the presence of olefins and alkanes, high yields of oxygenated products were obtained in the catalytic olefin epoxidation and alkane hydroxylation reactions. Mechanistic aspects, such as oxygen exchange between [(Porp)Mn(V)=16O](+) and H(2)(18)O, are also discussed.     

Hydroxylation mechanism of methane and its derivatives over designed methane monooxygenase model with peroxo dizinc core

The peroxo dizinc Zn(2)O(2) complex Q coordinated by imidazole and carboxylate groups for each Zn center has been designed to model the hydroxylase component of methane monooxygenase (MMO) enzyme, on the basis of the experimentally available structure information of enzyme with divalent zinc ion and the MMO with Fe(2)O(2) core. The reaction mechanism for the hydroxylation of methane and its derivatives catalyzed by Q has been investigated at the B3LYP*/cc-pVTZ, Lanl2tz level in protein solution environment. These hydroxylation reactions proceed via a radical-rebound mechanism, with the rate-determining step of the C-H bond cleavage. This radical-rebound reaction mechanism is analogous to the experimentally available MMOs with diamond Fe(2)O(2) core accompanied by a coordinate number of six for the hydroxylation of methane. The rate constants for the hydroxylation of substrates catalyzed by Q increase along CH(4) < CH(3)F < CH(3)CN ≈ CH(3)NO(2) < CH(3)CH(3). Both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) jointly affect the activation energy ΔE(≠). For the C-H cleavage of substrate CH(3)X, with the decrease of steric shielding for the substituted CH(3)X (X = F > H > CH(3) > NO(2) > CN) attacking the O center in Q, the activation strain ΔE(≠)(strain) decreases, whereas the stabilizing interaction ΔE(≠)(int) increases. It is predicted that the MMO with peroxo dizinc Zn(2)O(2) core should be a promising catalyst for the hydroxylation of methane and its derivatives.     

Synthesis and Structure of Vanadium—barium Complex of 2, 4, 6—Tripicolinato with 20—Member Macrocyclic Cavities

Recently, the thermal decomposition of heteronuclear complexes has become apromising method for the preparation of di- or tri-metallic oxides because the complex as precursor has the special microstructure, the controlled stoichiometry of the metals and lower decomposition temperature 1. In order to investigate Ba-V-O system, which has the special magnetic behavior 2, we synthesized the title complex as the precursor of this material. On the other hand, microporous constructions existing in…     

The reaction mechanism of hydroxyethylphosphonate dioxygenase: a QM/MM study

By employing ab initio quantum mechanical/molecular mechanical (QM/MM) and molecular dynamics (MD) simulations, we have provided further evidence against the previously proposed hydroperoxylation or hydroxylation mechanism of hydroxyethylphosphonate dioxygenase (HEPD). HEPD employs an interesting catalytic cycle based on concatenated bifurcations. The first bifurcation is based on the abstraction of hydrogen atoms from the substrate, which leads to a distal or proximal hydroperoxo species (Fe-OOH or Fe-(OH)O). The second and the third bifurcations refer to the carbon-carbon bond cleavage reaction. And this is achieved through a tridentate intermediate, or employing a proton-shuttle assisted mechanism, in which the residue Glu(176) or the Fe(IV)=O group serves as a general base. The reaction directions seem to be tunable and show significant environment dependence. This mechanism can provide a comprehensive interpretation for the seemingly contradicting experimental evidences and provide insight into the development of biochemistry and material sciences.     

Formation of carboxylic acids from small alkanes in zeolite H-ZSM-5

The activation of propane and isobutane in acidic zeolite H-ZSM-5 in the presence of both CO and H2O has been studied by in situ solid-state NMR and GC analysis. Evidence was provided for the conversion of propane to isobutyric acid at 373-473 K by cleavage of the C-C bond; methane and ethane are also produced. Isobutane is transformed into pivalic acid with simultaneous production of hydrogen. The low conversion (1-2%) at this temperature was rationalized by the existence of a small number of sites that are capable of generating carbenium ions which are trapped by CO at this temperature. A formate species was observed when CO and H2O were present on H-ZSM-5. This species disappeared in the presence of the alkane. At 573 K, the generation of large amounts of CO2 indicates a much higher conversion of the alkanes into carboxylic acids which, however, decompose under the reaction conditions.     

Cr2O3催化剂上甲烷部分氧化制备合成气

分别采用柠檬酸络合法和直接分解法制备了Cr2O3催化剂, 采用XRD, BET, TPR, XPS, TEM和TGA表征了催化剂的物理化学性质, 在常压固定床石英管(内径5 mm)反应器中考察了Cr2O3催化剂对甲烷部分氧化反应的催化性能. 在500~750 ℃, V(CH4)∶V(O2)=2, 空速12×104 h-1的条件下, O2几乎完全转化, CH4转化率及H2和CO选择性随着温度的升高而增加. 700 ℃下CH4转化率及H2, CO选择性随着空速(6.0×104~24×104 h-1)的升高而增加. 在500 h稳定性实验中, 随着反应时间的延长, CH4转化率及H2, CO选择性缓慢下降, XRD, TEM和BET结果表明, 催化剂的活性下降与烧结和团聚有关, TGA分析表明催化剂具有良好的抗积炭性. 通过CH4脉冲反应, 推测在反应过程中CO, H2, CO2和H2O是直接生成的.     

Catalysts for monooxygenations made from polyoxometalate: an iron(V)-oxo derivative of the Lindqvist anion

This work uses density functional calculations to design a new high-valent Fe(V)=O catalyst [Mo5O18Fe=O]3-, which is based on the Lindqvist polyoxometalate (Mo6O19(2-)). Because the parent species is stable to oxidative conditions, one may assume that the newly proposed iron-oxo species will be stable, too. The calculated M?ssbauer spectroscopic data may be helpful toward an eventual identification of the species. The calculations of C-H hydroxylation and C=C epoxidation of propene show that, if made, [Mo5O18Fe=O]3- should be a potent oxidant that will be subject to strong solvent effect. Moreover, the Lindqvist catalyst leads to an intriguing result; the reaction that starts along an epoxidation pathway with C=C activation ends with a C-H hydroxylation product ((4)6) due to rearrangement on the catalyst. The origins of this result are analyzed in terms of the structure of the catalyst and the electronic requirements for conversion of an epoxidation intermediate to a hydroxylation product. Thus, if made, the [Mo5O18Fe=O]3 will be a selective C-H hydroxylation reagent.     

Selective C-C coupling of Ir-ethene and Ir-carbenoid radicals

The reactivity of the paramagnetic iridium(II) complex [Ir(II)(ethene)(Me(3)tpa)](2+) (1) (Me(3)tpa=N,N,N-tris(6-methyl-2-pyridylmethyl) amine) towards the diazo compounds ethyl diazoacetate (EDA) and trimethylsilyldiazomethane (TMSDM) was investigated. The reaction with EDA gave rise to selective C--C bond formation, most likely through radical coupling of the Ir-carbenoid radical species [Ir(III){CH(.)(COOEt)}(MeCN)(Me(3)tpa)](2+) (7) and (the MeCN adduct of) 1, to give the tetracationic dinuclear complex [(MeCN)(Me(3)tpa)Ir(III){CH(COOEt)CH(2)CH(2)}Ir(III)(MeCN)(Me(3)tpa)](2+) (4). The analogous reaction with TMSDM leads to the mononuclear dicationic species [Ir(III){CH(2)(SiMe(3))}(MeCN)(Me(3)tpa)](2+) (11). This reaction probably involves a hydrogen-atom abstraction from TMSDM by the intermediate Ir-carbenoid radical species [Ir(III){CH(.)(SiMe(3))}(MeCN)(Me(3)tpa)](2+) (10). DFT calculations support pathways proceeding via these Ir-carbenoid radicals. The carbenoid-radical species are actually carbon-centered ligand radicals, with an electronic structure best described as one-electron-reduced Fischer-type carbenes. To our knowledge, this paper represents the first reactivity study of a mononuclear Ir(II) species towards diazo compounds.     

Unusual thermal C-h bond activation by a tungsten allene complex

Gentle thermolysis of the 18e alkyl-allyl complex, CpW(NO)(CH(2)CMe(3))(eta(3)-3,3-Me(2)C(3)H(3)) (1), generates a reactive 16e allene intermediate, CpW(NO)(eta(2)-CH(2)=C=CMe(2)) (A), with the concomitant evolution of neopentane via hydrogen abstraction from the dimethylallyl ligand. A has been structurally characterized as its PMe(3) adduct and is capable of effecting single and multiple C-H bond activations of hydrocarbon solvents. For example, the thermal reaction of 1 with cyclohexane leads to the formation of the 18e cyclohexenyl hydrido complex, CpW(NO)(eta(3)-C(6)H(9))(H) (5), as a result of three successive C-H activations of the alkane solvent.     

Olefin cis-dihydroxylation versus epoxidation by non-heme iron catalysts: two faces of an Fe(III)-OOH coin

The oxygenation of carbon-carbon double bonds by iron enzymes generally results in the formation of epoxides, except in the case of the Rieske dioxygenases, where cis-diols are produced. Herein we report a systematic study of olefin oxidations with H(2)O(2) catalyzed by a group of non-heme iron complexes, i.e., [Fe(II)(BPMEN)(CH(3)CN)(2)](2+) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [Fe(II)(TPA)(CH(3)CN)(2)](2+) (4, TPA = tris(2-pyridylmethyl)amine) and their 6- and 5-methyl-substituted derivatives. We demonstrate that olefin epoxidation and cis-dihydroxylation are different facets of the reactivity of a common Fe(III)-OOH intermediate, whose spin state can be modulated by the electronic and steric properties of the ligand environment. Highly stereoselective epoxidation is favored by catalysts with no more than one 6-methyl substituent, which give rise to low-spin Fe(III)-OOH species (category A). On the other hand, cis-dihydroxylation is favored by catalysts with more than one 6-methyl substituent, which afford high-spin Fe(III)-OOH species (category B). For catalysts in category A, both the epoxide and the cis-diol product incorporate (18)O from H(2)(18)O, results that implicate a cis-H(18)O-Fe(V)=O species derived from O-O bond heterolysis of a cis-H(2)(18)O-Fe(III)-OOH intermediate. In contrast, catalysts in category B incorporate both oxygen atoms from H(2)(18)O(2) into the dominant cis-diol product, via a putative Fe(III)-eta(2)-OOH species. Thus, a key feature of the catalysts in this family is the availability of two cis labile sites, required for peroxide activation. The olefin epoxidation and cis-dihydroxylation studies described here not only corroborate the mechanistic scheme derived from our earlier studies on alkane hydroxylation by this same family of catalysts (Chen, K.; Que, L, Jr. J. Am. Chem. Soc. 2001, 123, 6327) but also further enhance its credibility. Taken together, these reactions demonstrate the catalytic versatility of these complexes and provide a rationale for Nature's choice of ligand environments in biocatalysts that carry out olefin oxidations.     

Synthesis and Crystal Structure of Tris(N-p- methylphenyl-3-hydroxy- 2-ethyl-4-pyridinonato)iron(III)①

The complex [Fe(C14H14NO2)3](2H2O has been prepared by reaction of N-p-methylphenyl-3-hydroxy-2-ethyl-4-pyridinone with FeCl3(6H2O. A single-crystal X-ray study shows that the iron atoms lie in a trigonally distorted octahedral environment coordinated to the hydroxy and ketone oxygen atoms of three ligands in the mer configuration Mr=773.57(C42H46N3O8Fe). The crystal is hexagonal with space group P1c; a=15.943(2), c=17.612(4)?, V=3877.0(12)?3, Z=4, Dc=1.325g/cm3, (=0.445mm－1, F(000)=1634, R=0.0446, wR= 0.1154 for 3085 reflections with I >2((I). The bond lengths from iron to oxygens are 1.980(1)? for the ketone oxygens and 2.071(1)? for the hydroxy oxygens. The molecule exhibits the expected propeller shape, and the angle of the trigonal twist is 48.37(. The dihedral angles are 0.5(2)° between chelate ring plane and pyridine ring plane and 71.31(7)° between pyridine ring plane and benzene ring plane. The solvent H2O(O(3) and O(4)) molecules are linked with O(2) and O(1) by hydrogen bonds with bond lengths 2.900(1) and 2.999(1), respectively.     

Mononuclear oxovanadium complexes of tris(2-pyridylmethyl)amine

Mononuclear oxovanadium(IV) and dioxovanadium(V) complexes of tris(2-pyridylmethyl)amine (tpa) have been prepared for the first time. Crystal structure determinations of three oxovanadium(IV) complexes, [VO(SO4)(tpa)], [VOCl(tpa)]PF6, or [VOBr(tpa)]PF6, and a dioxovanadium(v) complex [V(O)2(tpa)]PF6 disclosed that the tertiary nitrogen of the tpa ligand always occupies the trans-to-oxo site. The structures of an oxo-peroxo complex [VO(O2)(tpa)]Cl that was prepared previously and of a mu-oxo vanadium(III) complex [{VCl(tpa)}2(mu-O)](PF6)2 have also been determined. The tertiary nitrogen is located at a trans site to the peroxo and chloride ligands, respectively. The total sums of the four V-N bond lengths from the tpa ligand are remarkably similar among the six complexes, indicating that the vanadium oxidation states become less influential in tpa bonding due primarily to the coordination of electron-donating oxo ligand(s). Absorption spectra of [VOCl(tpa)]+ in acetonitrile showed a significant change upon addition of p-toluenesulfonic acid and HClO4, but not on addition of benzoic acid. Protonation at the oxo ligand by the former two acids is suggested. Cyclic voltammetric studies in acetonitrile verified the proton-coupled redox behavior of the V(III)/V(IV) process involving the oxo ligand for the first time. From the dependence of the added p-toluenesulfonic acid to the CV, redox potentials for the following species have been estimated: [V(IV)OCl(tpa)]+/[V(III)OCl(tpa)](E1/2=-1.59 V vs. Fc+/Fc), [V(IV)(OH)Cl(tpa)]2+/[V(III)(OH)Cl(tpa)]+(Epc=-1.34 V), [V(IV)(OH2)Cl(tpa)]3+/[V(III)(OH2)Cl(tpa)]2+(Epa=-0.49 V), and [V(IV)Cl2(tpa)]2+/[V(III)Cl2(tpa)]+(E1/2=-0.89 V). The reduction of [V(V)(O)2(tpa)]+ in 0.05 M [(n-Bu)4N]PF6 acetonitrile showed a major irreversible reduction wave V(V)/(IV) at -1.48 V. The metal reduction potentials of the oxovanadium(IV) and dioxovanadium(V) species are very close, reinforcing the significant influence of the oxo ligand(s).